PAAL 6000 B2 - LED Lighting PARKSIDE - Free user manual and instructions
Find the device manual for free PAAL 6000 B2 PARKSIDE in PDF.
| Product type | Cordless site light (LED lighting) |
| Model | PAAL 6000 B2 |
| Brand | Parkside |
| Dimensions (W x D x H) | 165 x 150 x 44 mm |
| Weight | 700 g |
| Battery capacity | 6000 mAh (integrated lithium-ion) |
| Power supply (charging) | AC power adapter 100-240 V~ / 5 V ⎓ 2 A or car charger 12 V / 5 V ⎓ 2 A |
| USB ports | 1 USB-C input (charging), 1 USB-A output (5 V ⎓ 2.1 A) |
| Lighting modes | 4 modes: max white, eco white, white SOS flashing, red flashing |
| Battery life (full battery) | Max white: approx. 3.5 h; Eco white: approx. 6.5 h; SOS: approx. 8 h; Red flashing: approx. 60 h |
| Charging time | Approx. 3.5 h for an empty battery |
| Protection rating (product) | IP65 (dust-tight and protected against water jets) |
| Protection rating (power adapter/adapter) | IP20 |
| Minimum distance to illuminated material | 0.1 m |
| Mounting | Adjustable stand/handle rotatable 180°, integrated magnet for ferromagnetic surfaces |
| Power bank function | Yes, can charge small USB devices (max 2 A) |
| Package contents | Light, power adapter, car charger, USB cable (Type-C), instruction manual |
| Maintenance | Clean with a dry or slightly damp cloth; do not immerse |
| Repairability | LED and battery not replaceable by user; replace product at end of life |
| Warranty | 3 years (subject to legal conditions) |
Frequently Asked Questions - PAAL 6000 B2 PARKSIDE
User questions about PAAL 6000 B2 PARKSIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your LED Lighting in PDF format for free! Find your manual PAAL 6000 B2 - PARKSIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PAAL 6000 B2 by PARKSIDE.
USER MANUAL PAAL 6000 B2 PARKSIDE
Operation and safety notes
FR BE
PROJECTEUR DE CHANTIER SANS FIL
GB/IE Operation and safety notes Page 16
Kfz-Ladeadapter: IP20
USB-Eingangs
spannung/-strom:5V = =,2A
USB-Ausgangs
MACHEN SIE SICH VOR DER
WENN SIE DIESES PRODUKT AN ANDERE
TRAGEN SIE SCHUTZHANDSCHUHE!
Warnings and symbols used.
Introduction
Intended use. Page 17
Description of parts. 18
Technical data. 18
Scope of delivery. Page 19
Safety instructions. Page 19
Safety instructions for batteries / rechargeable batteries . Page 21
Before use. Page 21
Charging the product. Page 21
Checking the battery capacity. Page 22
Operation. 23
Using as a LED light. Page 23
Using as a power bank . 24
Maintenance and cleaning 24
Disposal. 25
Warranty 26
| Warnings and symbols used The following warnings are used in this user manual and on the packaging: | |||
| Direct current / voltage Polarity of output | Terminal | ||
| Alternating current / voltage | T | Product designed to withstand severe mechanical handling. | |
| Protection class III USB connection symbol | ψ | ||
| Protection class II Read user manual before use | |||
| (SMP) Switch mode power supply unit | ---0.1m | Minimum distance to illuminated material | |
| Short-circuit-proof safety isolating transformer | CE | CE mark indicates conformity with relevant EU directives applicable for this product. | |
| Press ON/OFF switch 2. | IP65 | Dust-tight / water jet protected (IP65) | |
CORDLESS WORK LIGHT
Introduction
We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.
Intended use
The product is intended for use at indoor or outdoor areas without electrical connection, e.g. workshop, garages, or garden sheds, etc. It has two brightness settings plus white flashing light and red flashing light.
This product is intended for use in private, domestic environment only and not for commercial purposes.
ATTENTION: The flashing light is not suitable as a traffic warning light. The product can further also be used as a power bank for small electronic devices with USB charging.
product is not suitable for household room illumination.
Description of parts
1 LED light
2ON/OFF switch
3 Screw of hinge joint
4 Adjustable foot/Hand grip
5 Magnet
6Charging indicator
7 Battery status button
8 Protective cap
USB input socket (type C)
10 USB output socket
11 Power adaptor
12 Car charger adaptor
13 USB cable
Technical data
Flashlight and work light
LEDs: 1 COB LED
| (non-replaceable); approx. 20 W | |
| Rechargeable battery: Lithium-lon | |
| rechargeable battery, 3.7 V, 6000 mAh | |
| 22.2 Wh (not interchangeable) | |
| Power bank rated capacity: 3500 mAh, at 5 V, 2.1 A | |
| Charging time for drained battery: approx. 3.5 hours | |
| Light duration (with fully loaded rechargeable battery): | White light at max. mode: approx. 3.5 hours |
| White light at Eco mode: approx. 6.5 hours | |
| SOS blinking: approx. 8 hours | |
| Red light blinking: approx. 60 hours | |
| Protection class: III / | |
| Protection type: | |
| Product: | IP65 |
| Power adaptor: | IP20 |
| Car charger adapter: | IP20 |
| USB input voltage / current: 5 V | ---, 2 A |
| USB socket output voltage / current: 5 V | ---, 2.1 A |
| Operating position: | The product can be used as shown in figure C or hanging |
| Product weight: | 700 g |
| Overall dimensions: | 165 x 150 x 44 mm |
| Maximum projected area: 330 cm² | |
| For indoor and outdoor use | |
| HG08120: | GS certified (TÜV SÜD) |
| HG08120-BS: | - |
| Manufacturer's name or trade mark, commercial registration number and address: | OWIM GmbH & Co. KG (HRA 721742) Stiftsbergstraße 1 74167 Neckarsulm GERMANY |
| Model identifier: | Model HG08120: WJG-Y130502000WV Model HG08120-BS: WJB-Y130502000WV |
| Input voltage: | 100-240 V~ |
| Input AC frequency: | 50-60 Hz |
| Output voltage: | 5.0 V--- |
| Output current: | 2.0 A |
| Output power: | 10.0 W |
| Average active efficiency: 78.8 % | |
| No-load power consumption: | 0.09 W |
| Protection class: | II |
Car charger adaptor:
| Input: | 12 V --- |
| Output: | 5 V ---, 2 A |
| Protection type: IP20 | |
| Exchangeable fuse: | 2 A, Ø 5 x 20 (L) mm |
| Model number: TL2002 | |
The power adapter, the USB cable and the car charger adapter are suitable for indoor use only.
Scope of delivery
After unpacking the product, check if the delivery is complete and if all parts are in good condition. Remove all packing materials before use.
1 Cordless work light
1 Power adaptor
1 Car charger adaptor for a 12 V connection
1 USB cable
1 Instructions for use
Safety instructions
BEFORE USING THE PRODUCT, FAMILIARISE YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR USE! WHEN PASSING THIS PRODUCT ON TO OTHERS, ALSO INCLUDE ALL THE DOCUMENTS!
WARNING! DANGER TO LIFE AND RISK OF ACCIDENTS FOR INFANTS AND CHILDREN!
Never leave children unsupervised with the packaging material. Always keep children away from the packaging material.
This product may be used by children aged 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or those lacking experience and / or knowledge provided they are supervised or instructed in the safe use of the product and they understand the associated risks. Do not allow children to play with the product. Cleaning and user maintenance must not be performed by children without supervision.
This product is not a toy and should be kept out of the reach of children. Children are not aware of the dangers associated with handling electrical products.
Do not use the product if you detect any type of damage.
Never immerse the product in water or other liquids!
Only connect the product to a properly installed mains socket or a suitable 12 V car charging socket. The voltages in each case must comply with information given in the section "Technical data".
Ensure that the electrical socket is easily accessible so that you can pull the power adaptor quickly out of the socket if necessary.
Do not carry out any modifications or repairs to the product yourself. The LEDs cannot and must not be replaced.
The LEDs are not replaceable.
If the LEDs fail at the end of their lives, the entire product must be replaced.
CAUTION! DANGER OF BURN
INJURIES! To prevent burns, verify the product is switched off and has cooled down for at least 15 minutes before touching it. The product can become very hot.
The accessible surface, especially heat shrink, is very hot when the lamp is operating.
FIRE HAZARD! Fit the product so that it is at least 0.1 metre away from the material to be illuminated.
Excessive heat can result in a fire.
WARNING! Do not turn on the light when the product is facing down to a combustible surface. The exposed surface may be overheated or ignited.
Do not place burning candles or open fire on or near the product.
Do not use the product near heat sources such as radiators or devices emitting heat.
- Dispose of the product if product, power adaptor [11], car charger adaptor [12] or USB cable [13] are damaged.
Ensure the USB cable [13] cannot become damaged by sharp edges or hot objects. Unwind the USB cable [13] completely before use.
This product may only be charged with the power adaptor [11] or car charger adaptor [12] provided.
While power adaptor 11 or car charger adaptor 12 are plugged in, they use a small amount of power, even when the product is not switched on.
To take power adaptor 11 or car charger adaptor 12 out of operation, unplug power adaptor from the socket or remove car charger adaptor 12 from the 12V supply respectively.
This product may only be charged with the provided power adaptor [11] (details refer to "Technical data" section) or car charger adaptor [12]. The provided USB cable [13] is only suitable for use with this product.
The flashing light is not suitable as a traffic warning light.
- Immediately switch the product off and remove the charging cable from the product if you smell burning or see smoke. Have the product examined by a qualified technician before using it again.
If you use a USB power supply, the socket used must always be easily accessible so that the USB power supply can be quickly removed from the socket in the case of emergency. Please also refer to the manufacturer's instruction manual.
Observe the usage restrictions and prohibitions of use for battery-operated products in situations which may be hazardous such as at petrol stations, airports, hospitals, etc.
WARNING! Do not cover the product
while charging. There is a risk of warming and overheating.
Safety instructions for batteries / rechargeable batteries
DANGER TO LIFE! Keep batteries / rechargeable batteries out of reach of children. If accidentally swallowed seek immediate medical attention.
DANGER OF EXPLOSION!
Never recharge non-rechargeable batteries. Do not short-circuit batteries / rechargeable batteries and / or open them. Overheating, fire or bursting can be the result.
Never throw batteries / rechargeable batteries into fire or water.
- Do not exert mechanical loads to batteries / rechargeable batteries.
Risk of leakage of batteries / rechargeable batteries
- Avoid extreme environmental conditions and temperatures, which could affect batteries / rechargeable batteries, e.g. radiators / direct sunlight.
If batteries / rechargeable batteries have leaked, avoid contact with skin, eyes and mucous membranes with the chemicals! Flush immediately the affected areas with fresh water and seek medical attention!
WEAR PROTECTIVE GLOVES!
Leaked or damaged batteries / rechargeable batteries can cause burns on contact with the skin. Wear suitable protective gloves at all times if such an event occurs.
This product has a built-in rechargeable battery which cannot be replaced by the user. The removal or replacement of the rechargeable battery may only be carried out by the manufacturer or his customer service or by a similarly qualified person in order to avoid hazards. When disposing of the product, it should be noted that this product contains a rechargeable battery.
Before use
- Charging the product
NOTES:
Remove all packaging materials from the product.
You can charge the product by means of the supplied power adaptor to a normal household socket, or by means of the supplied car adaptor to a 12 V car cigarette lighter socket.
The fuse of the car charger adaptor [12] can be exchanged. The technical data of the fuse must comply with information given in the section "Technical data". The fuse may only be replaced by a qualified electrician.
CAUTION! Do not connect the product to your car's 12 V connection if the car battery is already old and worn. Doing so could mean that the car engine will no longer start.
NOTES:
In order to use the product without a USB cable [13], you need to recharge the rechargeable battery before use. The charging process takes about 3.5 hours. The rechargeable battery is firmly integrated into the base of the product.
Fully charge the rechargeable battery prior to first use.
Charge the battery if it becomes empty (only 1 LED of the charging indicator 6 is flashing).
Open the protective cap 8.
- Connect the USB cable 13 with the USB connector of the power adaptor 11 or the car charger adaptor 12.
Connect the USB plug (type C) of the USB cable 13 to the USB input socket (type C) 9 on the product.
Plug the power adaptor [11] into a socket, or plug the car charger adaptor [12] into the 12 V socket in your vehicle.
NOTES:
The battery charging status is shown by the charging indicator 6:
| Charging indicator 6 status | Battery charging status |
1 LED flashes 0-25%
1 LED lights up, 1 LED flashes 25 - 50%
2 LEDs light up, 1 LED flashes 50 - 75%
3 LEDs light up, 1 LED flashes 75 - 100%
4 LEDs light up 100%
The charging time is approximately 3.5 hours when the battery was drained.
NOTE: The product has an overcharging protection system. Nevertheless, you should disconnect the product from the mains once the charging process is complete.
- Disconnect the USB cable 13 from the product to prevent the batteries discharging themselves.
- Close the protective cap 8 before you start to use the product again. Otherwise water could enter to the product when it is used outdoors.
- Checking the battery capacity
When product is not charged: Press the battery status button 7 to check the battery capacity. The green charging indicator 6 shows the capacity* of the battery inside the product.
1 LED lights up = 25%
2 LEDs light up = 50%
3 LEDs light up = 75%
4 LEDs light up = 100%
- This is the approximate percentage of battery capacity but not actual measurement.
Operation
RISK OF ACCIDENT! Preferably do not use the product whilst driving the vehicle. When using the product in a vehicle, be sure this does not endanger the driver or the passengers. Always store and secure the product so that even full braking does not pose a risk of injury from the product or product damage.
Turn the adjustable foot / hand grip 4 and fix the product at desired position. For that tighten the screw of the hinge joint 3 by hand. The adjustable foott / grip can also be turned up by approximately 180^ and be used as a hand grip.
The product can also be fixed by attaching it to a flat ferromagnetic surface with the magnet 5 of the adjustable foot / handle 4.
CAUTION! Please note the position of your hands whilst turning the adjustable foot / hand grip 4 to prevent pinching your fingers.
The product may be used as a light and a power bank.
NOTE: The energy stored in the rechargeable batteries power both the LED light and the power bank. Using the product as a power bank therefore reduces the operating time and brightness in lighting mode.
Using as a LED light
Fully charge the product as described in the section "Charging the product".
The product can be operated in 4 different modes. Select these by repeatedly pressing the ON/OFF switch 2.
ON/OFF Mode switch
Press 1x: The white light lights up at maximum mode.
Press 2x: The white light lights up at Eco mode.
Press 3x: SOS blinking (white light)
Press 4x: Red light blinking
■ ATTENTION! The flashing red light can have adverse effects on the health of predisposed individuals!
The flashing light is not suitable as a traffic warning light.
Press 5x: Switch off the light.
Using as a power bank
When used with the USB cable [13], the product may be used to charge small electronics devices with USB socket (type C) for charging (e.g. mobiles or digital cameras).
Please note, the charging current the device requires may not exceed 2 A. Carefully read the instructions for use of the device you wish to charge.
ATTENTION! Charging a device which requires a higher charging current may cause a defect in both devices.
Also note, the battery of the device you wish to charge must have a significantly smaller capacity than the total capacities of the rechargeable batteries inside the product (6000 mAh). Otherwise charging may not complete.
Open the protective cap 8.
Insert the USB plug of the USB cable 13 into the USB output socket 10.
Insert the USB plug (type C) of the USB cable 13 into the small electronic devices you wish to charge. The green charging indicator 6 lights up, indicating the battery capacity.
Remove the USB cable 13 as soon as charging is complete.
Close the protective cap 8.
- Maintenance and cleaning
The product requires no maintenance. The LEDs cannot be replaced.
Switch off the product and disconnect the power adaptor from socket or unplug the car charger adaptor 12 from the 12V socket before cleaning.
- Close the protective cap 8 on the USB input socket 9 and USB output socket 10.
Never immerse the product in water or other liquids.
Never use caustic cleaners.
Regularly clean the product with a dry, lint-free cloth. Use a slightly moist cloth to remove any stubborn dirt.
Disposal
The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.
Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1-7: plastics / 20-22: paper and fibreboard / 80-98: composite materials.
The product and packaging materials are recyclable, dispose of it separately for better waste treatment.
The Triman logo is valid in France only. Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.
Faulty or used batteries / rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and its amendments. Please return the batteries / rechargeable batteries and / or the product to the available collection points.
Environmental damage through incorrect disposal of the batteries / rechargeable batteries!
Batteries / rechargeable batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used batteries / rechargeable batteries at a local collection point.
Warranty
The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.
The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase.
Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it - at our choice - free of charge to you. This warranty becomes void if the product has been damaged, or used or maintained improperly.
The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
Please have the till receipt and the item number (e.g. IAN 123456_7890) available as proof of purchase.
You will find the item number on the rating plate, an engraving, on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product.
If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.
Service
GB Service Great Britain
Tel.:08000569216
E-Mail: owim@lidl.co.uk
IE Service Ireland
Tel.:1800200736
E-Mail: owim@lidl.ie
C
IP65
The power adapter, the USB cable and the car charger adapter are suitable for indoor use only.
Diodes LED: 1 COB-LED (non
replacable);env.20W
Batterie:Accu lithium-ion,3,7V
6000 mAh 22,2 Wh
(non remplaçable)
Capacité comme
HG08120: Certification GS (TÜV SÜD)
HG08120-BS: -
Raison sociale ou
marque déposée,
DIT PRODUCT AAN IEMAND ANDERS
DOORGEEFT, GEEF DAN OOK ALLE
DOCUMENTATIE MEEI!
WAARSCHUWING!
LEVENSGEVAAR EN KANS OP ONGEVALLEN VOOR PEUTERS EN KINDEREN!
1 LED brandt = 25%
2 LEDs branden = 50%
3 LEDs branden = 75%
4 LEDs branden = 100%
NOSIC REKAWICE OCHRONNE!
NOSTE OCHRANNÉ RUKAVICE!
Vytékajínebo poskozené
baterie / akumúláry mohou zpúsobit
pri kontaktu s pokožkou popáleniny. V
takovych pripeadech nods vždy vchodné
ochranné rukavice.
Tento vyrobek ma vestaveny akumulator, ktery nemuze byt vymenen uzivatelem. Aby se zabrano rizikum, muze odstaneni nebo nahradu akumulatoru provest pouze vyrobce nebo jeho sluzba zakaznikum nebo podobne kvalifikovana osoba. Pri likvidaci vyrobku si povsimnete, ze obsahuje akumulator.
- Před použitím
Nabijeni vyrobku
UPOZORNENI:
Odstrańte veskery obalovy materiaj z vyrobku.
Vyrobek s dodanym napajecim adaptere m nabijejte z normalni zasuvky v domacnosti nebo dodanym nabijecim adapterem do vozidla z 12 V zasuvky zapalovace cigaret.
NOSTE OCHRANNÉ RUKAVICE!
Vytečene alebo poskodené batarie/ nabijatel'ne batérié možu pri kontakte s pokožkou sposobit popáleniny. V takych pripadoch vždy noste vchodné ochranné rukavice.
HG08120: Certificate GS (TÜV SÜD)
HG08120-BS:
LEDs: 1 COB-LED (ikke
1 LED lyser = 25%
2 LED lyser = 50%
3 LED lyser = 75%
4 LED lyser = 100%
