My L 220 LED - Lighting STEINEL - Free user manual and instructions

USER MANUAL My L 220 LED STEINEL

Please read carefully and keep in a safe place.

Under copyright. Reproduction either in whole or in part only with our consent.
-Subject to change in the interest of technical progress.

Symbols

Hazard warning!

Reference to other information in the document.

2. General safety precautions

Disconnect the power supply before attempting any work on the unit.

• During installation, the electric power cable to be connected must not be live. Therefore, switch off the power first and use a voltage tester to make sure the wiring is off-circuit.
• Installing these lights involves work on the mains voltage supply; installation must therefore be carried out professionally in accordance with the applicable national wiring regulations and electrical operating conditions (DE-VDE 0100, AT-ÖVE/ÖNORM E 8001-1, CH-SEV 1000).
• Only use genuine replacement parts.
• Repairs may only be made by specialist workshops.

3. L 240 S / L 220 S L 220

Proper use

• Outdoor light with LEDs as the light source.
  -Suitable for wall mounting outdoors.
• The unit is not suitable for connecting to a dimmer.

Not dimmable

-These sensor versions (S versions) also feature an infrared sensor for detecting movement.

Operating principle

-Outdoor lights
-LED technology

The S versions also provide these functions:

The integrated infrared sensor detects the heat radiated from moving objects (e.g. people, animals).
- The heat detected in this way is converted electronically into a signal that switches the LED light ON automatically.
- The most reliable way of detecting motion is to install the unit with the sensor aimed across the direction in which a person would walk.
-Reach is restricted when the unit is approached head on.
-Obstacles (e.g. trees, walls etc.) interrupt the line of sensor vision.
-Heat radiation is not detected through obstacles (e.g. walls or panes of glass), the sensor is not triggered.
-Sudden fluctuations in temperature as a result of changes in weather are not distinguished from sources of heat.

L 240 S package contents (Fig. 3.1)
L 220 S package contents (Fig. 3.2)
L 220 package contents (Fig. 3.3)
L 240 S product dimensions (Fig. 3.4)
L 220 S product dimensions (Fig. 3.5)
L 220 product dimensions (Fig. 3.6)

L 240 S product components (Fig. 3.7)

L 220 S product components (Fig. 3.8)

L 220 product components (Fig. 3.9)

A Light enclosure with base
B Plug-in terminal
C Wall mount
D Sensor (S only)

Luminous intensity distribution (Fig. 3.10)

4. Installation

• Switch OFF power supply (Fig. 4.1)

The leads consist of three wires:

L = phase conductor (usually black, brown or grey)

N = neutral conductor (usually blue)

PE = protective-earth conductor (green/yellow) If you are in any doubt, identify the conductors using a voltage tester; then disconnect from the power supply again. Connect the phase conductor (L) and neutral conductor (N) to the terminal block.

Important:

Incorrectly wired connections will produce a short circuit later on in the product or your fuse box. In this case, you must identify the individual conductors once again and re-connect them. A mains power switch for turning the unit ON and OFF may of course be installed in the mains supply lead.

Note:

The light source in this light must only replaced by the manufacturer or a service engineer authorised by the manufacturer or by a similarly qualified person.

Connecting the mains power supply lead (Fig. 5.6)

L 240 S, L 220 S wiring diagram (Fig. 4.2)

L 240 S, L 220 S wiring diagram (Fig. 4.3)

5. Mounting

• Check all components for damage.
• Do not use the product if it is damaged.
• Select an appropriate mounting location, giving consideration to sensor reach and mounting height (Fig. 5.1).

Mounting procedure

(Based on the example of L 220)
- Switch OFF power supply (Fig. 4.1).
- Detach light housing from the wall mount, paying attention to the position of the sensor (Fig. 5.2).
Mark drill holes (Fig. 5.3).
- Drill holes and insert wall plugs (concealed power supply cable (Fig. 5.4).
- Drill holes and insert wall plugs (with spacers for surface power supply cable (Fig. 5.5).
- Connect conductors (Fig. 5.6).
- Connect plug-in connectors (Fig. 5.7).
- Fit light enclosure (A) onto wall mount (C). Pay attention to plug-in connections as well as the position of the sensor (Fig. 5.8).
- Screw light enclosure into place (Fig. 5.9).
- Switch ON power supply (Fig. 5.10).
- Make settings (S only) "6. Functions".

6. Functions

The sensor-switched light can be put into service after mounting the light enclosure and connecting to the mains power supply.

Factory settings (S only)

Twilight setting: daylight operation 2000 lux

Time setting: 8 s

Twilight setting / response threshold (S only) (Fig. 6.1)

• The sensor's response threshold can be infinitely varied from 2-2000 lux.
• Control dial set to = daylight operation, approx. 2000 lux.
• Control dial set to = night-time operation, approx. 2 lux.

Time setting (S only) (Fig. 6.1)

Light ON duration can be infinitely varied from 8 s - 35 min

-It is recommended that the shortest time be selected for setting the detection zone.

• Control dial, shortest time = approx. 8 s

• Control dial, longest time = approx. 35 min

Adjusting the detection zone / reach setting (S only)

Depending on the mounting height, the detection zone setting can be optimised to suit requirements. The shroud foil can be used for masking out any number of lens segments to limit reach as required, e.g. to mask out paths or neighbouring property (Fig. 6.2).
-Reach can be adjusted from 2 - 10m by tilting the sensor (D) through 90^ (Fig. 6.3).

House numbers

• Affix the house street number using the stickers provided (Fig. 6.4).

7. Maintenance / care

Warning of hazards from electricity!

Contact between water and live parts can result in an electric shock, burns or death.
- Only clean device in a dry state.

Risk of damage to property!

Using the wrong cleaning product can damage the light.

• Clean device with a moist cloth without detergent.

Important note: the control gear cannot be replaced.

8. Disposal

Electrical and electronic equipment, accessories and packaging must be recycled in an environmentally compatible manner.

Do not dispose of electrical and electronic equipment as domestic waste.

EU countries only:

Under the current European Directive on Waste Electrical and Electronic Equipment and its implementation in national law, electrical and electronic equipment no longer suitable for use must be collected separately and recycled in an environmentally compatible manner.

9. Manufacturer's warranty

This Steinel product has been manufactured with utmost care, tested for proper operation and safety and then subjected to random sample inspection. Steinel guarantees that it is in perfect condition and proper working order. The warranty period is 36 months and starts on the date of sale to the consumer. We will remedy defects caused by material flaws or manufacturing faults. The warranty will be met by repair or replacement of defective parts at our own discretion. The warranty shall not cover damage to wear parts, damage or defects caused by improper treatment or maintenance. Further consequential damage to other objects shall be excluded.

Claims under the warranty will only be accepted if the unit is sent fully assembled and well-packed with a brief description of the fault, a receipt or invoice (date of purchase and dealer's stamp) to the appropriate Service Centre.

Repair service:

If defects occur outside the warranty period or are not covered by the warranty, ask your nearest service station for the possibility of repair.

YEAR

MANUFACTURER'S WARRANTY

10. Technical specifications
Dimensions (W×H×D)	L 240 S: 165×305×81 mm L 220 S: 246×251×84 mm L 220: 246×250×57 mm
Supply voltage 220 - 240 V, 50 / 60 Hz
Luminous flux/light level L 240 S: 946 lm / 101 lm/W L 220 S: 869 lm / 93 lm/W L 220: 869 lm / 93 lm/W
Power consumption (Pon) L 240 S: 9.3 W L 220 S: 9.3 W L 220: 9.3 W
Sensor on standby (Pst) L 240 S, L 220 S: 0.5 W
Colour temperature 3,000 K (warm white)
Colour rendering index L 240 S: R a = 82 L 220 S: Ra = 83 L 220: Ra = 83
Average L70B50 at 25°C: >60,000 hours rated life expectancy
Colour consistency SDCM Starting value: 3
Luminous intensity distribution
Sensor technology (S only) Passive infrared
Angle of coverage (S only)	180°
Detection reach (S only) Max. 10 m
Time setting (S only)	8 s - 35 min
Twilight setting (S only)	2 - 2,000 lux
IP rating	IP44
Protection class	II
Impact resistance	IK07
Ambient temperature	-20°C to +50°C
Technical documentation at www.steinel.de
These products contain an energy efficiency class "D" light source.

11. Troubleshooting

Malfunction Cause Remedy

Light without power	■ Fuse faulty, not switched ON, break in wiring	■ Fit new fuse, turn ON mains switch, check wiring with voltage tester
Light not switching ON	■ Surroundings still too bright (S only) ■ Mains switch OFF ■ Fuse blown ■ Detection zone not correctly adjusted (S only)	■ Wait until response threshold is reached or adjust setting ■ Switch ON ■ Fit new fuse, check connection if necessary ■ Readjust
Light not switching OFF	■ Continued movement within the detection zone (S only)	■ Check detection zone and readjust if necessary
Light switches ON when it should not	■ Cars in the street are detected, for example (S only)	■ Check detection zone and readjust if necessary
Changing reach	■ Differing ambient temperatures (S only)	■ When it is cold, shorten reach by tilting sensor down, move it up in warm weather

FR

Piesleguma plans L 240 S, L 220 S (4.2 att.)

Piesleguma plans L 240 S, L 220 S (4.3 att.)

5. Montaža

• Pärbaudiet visas detalias, vai tās nav bojatas.
• Bojajumu gadijumā nelietojiet produktu.
• izveliieties montazai piemeroitu vietu, nemot vera sniedzamibu un montazas augstumu (5.1. att.)

Montazas soli

(Uz L 220 piēmērā)

• Atslédziet elektribas apgadi (4.1. att.)
• Atvienojiet gaismekla korpusu no sienes stipri-najumu, pieveršot uzmanibu sensora pozicijai (5.2. att.)
• Atzimejiet urbuma vietas (5.3. att.)
• Izurbiet carumus un ievietojiet dibelus (Zemapmetuma sievads 5.4. att.)
• Izurbiet carumus un ievietojiet dibelus (ar starplikam virsapmetuma pievadam 5.5. att.)
• Pievienojiet pieslēguma kabeli (5.6. att.)
• Pievienojiet savienotajus (5.7. att.)
• Uzspraudiet gaismekla korpusu (A) uz sienas stiprinajuma (C). Pieversiet uzmanibu uzsprazamajiem savienotajiem, ka an sensora pozicijai (5.8. att.)
• Nofiksejiet gaismekka korpusu ar skruvēm (5.9. att.)
• lesledziet stravas padevi (5.10. att.)
  Veicietistaniunu(tikaiS) "6.Funkcijas"

6. Funkcijas

Pec tam, kad gaismekla korpuss ir uzmontets un elektrotiklas ir pievienots, sensorgaismekli var sakt lietot.

Rupnicas iestatijumi (tikai S)

Kreslas sensora iestatišana:

dienesgaismas rezims 2000 luksi

Laika iestatishana: 8 s

IOnoJIHHTeJIbHO DeIcTByeT IaBapnaHTOB S:

-BCTpoeHHbI INHpaKpaChbI CEHCOP pernctpnpyet TeNIOBOe N3nyHeHne DBNKyUxxCra O6bekTOB (HaNPIMep, IIOdei, XINBOTbIX N.T.D.).
-TenloBoe n3nyehne npoe6pa3yeTcB 3JIeKTPoHHbI CNHaN, KOTOpbI BbI3bIBaET aBTOMATnueCKOE BKIOUeyHne CBETODNOHOFO CBETNJbHnKa.
-Camay haexkna pernctpaun oecneuBa-ETcMOHTaXOM n3eJIa C6Oky OTHOCHTeJIbHO HapabHeHn DvIXKeHH.
-PaIyC DeIcTBnO rOpAHueH,ecJI Bbl noJxO-dITE HeIOcpeIcTBeHHo K n3deJIInO.
-3arpaKaIauUne obBeKtBI (HaIpIMep, IpeBbIa, CTeHbI) IpeEkpBaIOT 3OHy O6HApYKeHnCeHCopy.
-B TOM Clyuae, ecJn Ha nyTu IMeOTc npenrTCTBna (HaNPmep, CTehbl Nn OkOHbIe CTeKna)peNCTpaunr TeNIOU3JIyHe HnpOncxOuNT, aCJeIOBaTeNbHO He npOu3BOuNTc N BKIOUyeHn.
-Pe3Kne IN3MeHEnHr TEMpePaTypbI IN3-3a NO-TOdHbIX BO3DeiCTBn IN3DeJIne He CNOCO6HO OTJNUHTb OT NCTOCHIKOB TEPJa.

O6bEm nocTaBkn L 240 S (pnc.3.1)

Osbem noctabkn L 220 S (pnc.3.2)

06bem nocTbKn L 220 (pnc.3.3)

Pa3MepbIu3dennL240S(pnc.3.4)

Pa3MepeIu3eIeIaL220S(pnc.3.5)

Pa3MepbIu3dEJIyL220(pnc.3.6)

O63op n3denn L 240 S (pnc. 3.7)

O630 np 3denn L 220 S (pnc. 3.8)

O630 npnndenL 220 (pnc. 3.9)

A Kopnyc CBetnIbHnka C waccn
B KoHTaKTHbI 3aXkIM
C KpoHHTeH
D CeHcOp (ToJbko S)

PacnpedeeneHne cnIbI CBeta (pnc.3.10)

4. MoHTaX

OTKIOHTb 3JNEKtpoNTaHHe (pnc.4.1)

Cetebo npobod cocton 3 xnl:

L = Φa3a (obbyHNo YepHoro, KopuHHeBOro nn ceporo LBeTa)

N = HjIeBOi npoBoi (aIe Bcero CnHni)

PE = npoBOd 3a3eMnIeHnIa (3eIeHbI/KeIeTbI)

B clyae comHeHnIeHTnFIOuPoBaT Ka6JIb C NOMUbIO INDnKaTOpa, 3aTeM CHOBA OTKJIOHTb HAnpXKeHne. PnncOeINHtB pa3HbI (L) n HyJeBOI npOBoN (N) K COOTBETCTByIOUIM KJEMMaM CBETINbHnka.

Baxkho:

HenpaBnIbHOe npncOeHHHe npoBOOB BycTpoNCTBe nIN B paCnpEJIteJIbHOM RaUKe C npedoxpaHntTeJMMoKET npNBecNT K KOpOTKOMy 3aMbKaHIO. B TAKOM cIyuepe peKomeHnyetc eue pa3 npOBepNTB npoBOJa N 3aHOBO NOkNCHtB nx. Pn Heo6XoIMOCTN B CeTEBoN pOBoD MoKET 6bITB BMOHTnPOBaH BbIKNoUaTeJIb DnA BKIOUeHn I BbIKIOUeHn CTeBOrTOkA.

Yka3aHne:

CBeToN3JyUaTeIb 3TOTO CBeTnJIbHnKa pa3peWaaetcraMeHrTb TOnbKO IPOIN3BOIDTEJIHO,ABTOpN3OBAHHOMY IM cepBnCHOMy TEXHnky JIn JInCy aHaIOrnHoi KBaJIuΦnKaU.

PnpcoeDInHeHne ceTeBOrO npoBoDa (pnc. 5.6)

План подкюецн L 240 S, L 220 S (pnc. 4.2)

План подкюецн L 240 S, L 220 S (pnc. 4.3)

5. MoHTaX

• PpOBepuTb BCE KOHCTpyKTHBHeIe DeTaJIHa IpeMET NOBpeXKeHnIa.
• Пи поврахдених He BKliucaTb npOdyKT.
• Bb6paTb NOxOJIeMecTo IJRA MOHTaKa C yHeTOM paIyCa DeIcTBnI M OHTaXHOB BbICoTbl (pnc.5.1)

IopraokMOHTaxa

(на пимеpe L 220)
- OTKJIQUHTb əJneKTpOpiNTaHHe (pnc. 4.1)

OTCOEINHHTB KOPNyc CBETNIBHnka OT KPOH- WTeHnHa, pR N 3TOM CJIeINTb 3a NOLOXKeHNiem ceHCopa (pnc.5.2).
- Hametntb OTBepCTnI nIa CBepJeHn (pnc. 5.3).
- PpocBepJIbTb OTBepCTnI N BCTaBtB IIO6eJI (npoBOd cKpbITOn npoBOdkn, pnc. 5.4)
- Порсеверлть OTBERPCTЯ N BCTaBtB ДIOБЕЛ (c pacNOPKAMN B CJlyae OTKpbIToI NOBOdKN, pnc. 5.5)
- PoiKJIIOHTb CoeINHInTeJbHbI Ka6eJIb (pnc. 5.6)
-ПоДКЛЮЧИТБШТЕКЕРпьIE COEДИНЕнЯ (pnc.5.7).
- YctaHOBtB KOpNc (A) CBETnIbHnKa Ha KPOH- tTeiH (C). CneITb 3a NOJKeHnEM ITeKePbIX COeINHeHm IN NOJKeHnEM CeHCopa (pnc.5.8).
3aФИКСИРОВАТБ KOPПУС CBETИЛБИКА BИNTAMN (pnc.5.9).
BkIIOuHTb 3JIeKTPoNTaHne (puc.5.10)
- BbINOHNITb peRyIINrOBKn (TOnbKO S) "6. ΘKcNpyaTaun"

6. 3Kcnpnyatauia

IocJe yCTaHOBKn KOpnyCa CBeTnJIbHnKa N Bbl- NOJIHeHnCeTeBOrO NODKJIouHnN IOTOLOHyBn CEHCOPHb CBeTnJIbHnK MoXeT 6bITb NpUeH B 3KcPJIyatauIO.

3aBODcKne HacTpoNk (TOJIbKO S)

YcTaHOBka CymepeHoro Nopora: peKIM DHeBHO OcBeUeHnA 2000 Jk Bpemr BkIIOueHnA:8c

YcTaHOBkaCyMepeHOro BKJIIOUeHnIa

(nopor cpa6aTbIbAHn) (Tolbko S) (pnc. 6.1)

-Порог срабаТыВань сehсора может 6ыть установен бecctупунаTO вдиапазоне 2-2000лк.
-PeryIaTOp,yCTaHOBneHHbI Ha=peKIM DHeBHOOOCBeUeHn，npM.2000nk.
- PergyIaTOp, yCTaHOBJIeHHbI Ha =peXIM cyMepeHOrO ocBeUeHnIa, OK. 2 Jk.

Bpem BkIoueHn (TolbKO S) (pnc. 6.1)

-BpemocBeHmMoKet6bItbIaBHOyCTa-HOBHeHO BnnaHa3OHeOT 8 cek. 10 35 MIn.
-Пин haCTpoIke 3Ohbl OSHapUxKeHnpeKOMeHdyETcYCTaHOBITb MHNIMaJIbHyIO IpOdoJXINTeJIbHOCTb.
-MnHmMaJIbHa npoIOnJXnTeJIbHOCTb Ha yCTaHOBOUHOM peYJrTOpe = OK. 8 cek.
- MaKcImaJIbHaI npOIOJIxKITeJIbHOCTb Ha yCTaHOBOUHOM peryJrTope = OK. 35 MInH.

YcTaHOBka 30HbI O6HApXeHnra / perylnpOBKa paAnuCa DeiCTBnra (TOJbKO S)

-B3aBNCIMOCTNOT BbICOTbMOHTaKa npn HeoBXOIMOCTN MOXHO pON3BecTOn ONTMaJIbHyOyCTAHOBky 3OHbI O6HApxKeHn. POnycFepnueCKa 3acNoHka npeHa3Haayetc dJa 3acNoHaCErMeHToB JInH3bl, T.e. dJa yMeHbJHeHn paDnYCa JeICTBnB B KaKdOM OTdEJIbHOM CInyae.HanpImep, YTO6bl BbIeINMb PeWexOxDhie DOpOKKn nn COCeIDCKne UyAcTKn (pnc.6.2).-BlaRaOpAraBepTtKaJIbHOMy DmIXKeHNIO CeHCopa(D) Ha 90^ paDiNyC DeiCTBnM MoXHo peryIpopoBaTb ot 2 do 10 M (pnc.6.3).

Homepa DOMOB

HaheCTn HOMepa DOMOB C NOMOUsIO npNlae-MbIX HaKJeeK (pnc.6.4).

7. TexHnueckoe 06cnyxnbAHne/yyxO

PpeynpejckJeHne 06 onachocTax n3-3a ydapa 3JIeKTpueeCKn TOMOK!

IopanaHne BOdbHa TOKOpBOJaUe JeTaJIIMoKet npBODHTb K yDapy 3JKeTpuYeCKIM TOKOM,OKOram IIN JTeTaNbHOMY NCxOy.
- UHCTITb I3dJIe TOnIbKO B CyXOM COCTOHN.

Onachoctb mmyueeCTbeHHoro yuepe6a!

HenpaBnIbHbIe YIcTReIe CpeIcTBA MoYr T NOBpeIITb I3dEJIe.
- YNCTNTb N3dJIne CJIeRka yBnaJxHHeHHoT TpIKNoB6e3 YNCTTuaX CpeDCTB.

Baxkho:Pa6ooye n3dJIne 3aMeHnTb HeIb3y.

8.Ут tunизацья

3neKtpnpnbopbl, KOMnJIeKTyUOuIe N yNaKOBky CJeNyET HaPabJIaTb Ha 3KOJIoRnHyU BTOpNHyIO nepepa60Ky.

He BbIbpaCbIBaTb 3JIeKTpOpnpOpblB 6bITOBbIE OTXoDbI!

TolbkoДЯСТРАн EC:

Corglacno DeiNCTByIOUeI EbponeNCKo DNpeKtNBEO OTPa6OtaHHOMy 3JIeKTPnueckOMy I 3JIeKTPOHOMy OOBpyOBAHnIO N ee peAIN3aCmN B HauN-OHaJIbHbIX 3aKOHOdaTeJIbCTBax OTPa6OtaHHbIE 3JIeKTPoPn6Opbl DOnJXHbI CObnpTaBcR OTdJIbHO HAnpaBJIaTbcra Ha 3KoJIoTNHyIO BTOpnHyIO Nepepa6OTKy.

9.「rapaHTnI npOn3BODnteJIa

DaHhoe n3dene npOn3BODCTBa Steinel 6bIIO c OOCobIM BHIMaHnEM n3rOTOBJeHO u NCbITaHO Ha pa6oTOcNOcBOcHocTb u 6e3OAnCHOCTb 3KCNJIyatauN COOTBeCTBHeHOO DeIcTBYUOLUM INHCTpyK- CnM, a NOTOM NOBeprHyTO Bb6OpOHOMy KOHTPOJIO KauEcTBA. FInpMa STEINEL rapaHTnpyET BBICOKoe KaueCTBO u HAdexKHyU pa6Otu n3dEJIy. FapantnHbI cPOK 3KcNlyaTaUu coCTabJraET 36 MeCraeB CO dHa IPOdaXn N3dEJIy. FInpMa o8yETcY UcTpaHNTb HeIOCTaTKU, KOTOpBIE BO3HKnB BCNECTBne DepeKTA MaTePnaJaN uN KOHCtpyKuN. DepeKtBu YcTpaHnOTcnyTEM peMOHTa N3dEJIy LNo 3aMeHOH HeNCnPabHBix DeTaN E NO yCMOTpeHnIO fInpMbI. FapantnHbI cPOK 3KcNlyaTaUu He pAcNPocTpaHReTCs HA NOBpeXdEHnN i DepeKtBu, Bo3HKnUe B pe3yNbTaTe N3HOCA DeTaN, HeNaLExKaUe N 3KcNlyaTaUu N yXoJa. FInpMa He Hecet OTBcTcBEHHOCr 3a MaTePnaJIbHbI yUePb TpeTbIX NLI, HaHeceHHbI B pnoceCe 3KcNlyaTaUu N3dEJIy.

IapaHTnI npedocTbIeTcTOJIbKO B TOM Clyuae, ECNI N3dJIeB CObpaHOM N yNaKOBaHHOM BnDE C KpaTKIM ONUcaHMe HEnCnpaBHOCTN 6blO OT- nPaBHeHO BmEcTe C pInIOXKeHHbIM KaccOBbIM YeKOM NJI KBrTaHcnei (C DaToI npOJaXn I NeaTbIO TOPROBOI npedpIyTn) NO aDpeCy cepBnCHoMactepckOn.

PemOHThbI cepBnC:

No nCTeHn rapaHTnHO rpoKa nn npn HauHn HenoJaOK, NCKJIooHaOuXrapaHTnIO, ObaPATNTecb B 6JnxKaIwe cepBnCHoe npednpTne,TO6bl NOJyHTb INΦopMaUHO BO3MOxHOCnpeMOHTa.

PperIeHa ypeLa L 240 S (pnc.3.7)

PperneHa ypea L 220 S (pnc.3.8)

PperneHa ypea L 220 (pnc.3.9)

A Kopnyc Ha Jama c uacn
B Kjema
C CToiKa 3a CTeHa
D Cen30p (cMo S)

Pa3npedeJeneHe Na CBETnHaTa (pnc. 3.10)

4. MoHTax

• Ia ce n3KJIIOHn eIeKtpo3axpaHbAHeTo (pnc. 4.1)

Ka6eJIbT cIbIbPka 3 npOBdHnka:

L = φa3a (obukHOBHe ηepeH, KaΦyB nJIn CNB)

N = Hya (ObukHOBeHO CnH)

PE = 3a3eMBAu, npoBOHnK (3eJIeH/KbIIT)

Pn CbMHeHne, npOBOnHnUte Tpr6Ba da 6bDat NdeHTnCnnpaHc ypeD 3a npOBepKa Ha HApEKeHNeTO, cJeD KOeTO OTHOBO Da 6bDat CBp3aHn, 6e3 HApEKeHne. Fa3aTa (L) n HyNaTa (N) ce CBp3BaT KbM JyCTep KJIeMaTa.

Baxkho:

Pa3mHa Ha npOBOnHnUte BODI DO KbCO CbeiHeHneB Upea nn Ta6IoTO C npEpa3nteI. PnTaKbB CnyaB BCEKN npOBOnHk Tpr6Ba Oue BeHbX Da 6bJe NdeHTnФuipan H NaHOBO CBp3aH. KbM CNCTemata, pa3bnpa ce, MoKe da 6bJe Do6aBeH npeKbCBauch, 3a BKJIIOUcbHe u N3KJIIOUbaHe.

CbeHne:

OcbETHTeJIHOTo TJaHO Ha Ta3n JAmNa MoKe Ja 6bJe 3aMeHraHo CaMo OT PpON3BODITeJI NII NOpPbUaHOT HrO CepBn3eH TexNk NII Dpyr TexNk C NOIObHa KBaJIncnKaIy.

Cbbp3BaHe KbM MpeXkaTa (pnc. 5.6)

Планн ha CBbp3BaHe L 240 S, L 220 S (pnc. 4.2)

Планн ha CBbp3BaHe L 240 S, L 220 S (pnc. 4.3)

5. MoHTax

• Bcunkn yactn da ce npOBepr 3a ueTn.
• Пи поврени рpoodyкът да He ce nycka в Ezekлноataць.
  -Да ce n36epe IOdXOJaIc MOCTo 3a MOHTaK, cbo6pa3raBaIKce C O6XBaTa N BnCOUnHaTa Ha MOHTaK (pnc.5.1).

PocJeIOBaTeJIHOCT 3a MOHTaX

(no npimepa Ha L 220)

-Да ceи3КЛIOч eJIeKТр03axpaHbAHeTO (pnc.4.1).
- KopnycBT Da ce OTdenn OT cToiKaTa 3a cTeHa, npu ToBa Da ce CNeDn NOnuTnHa CeH3Opa (pnc.5.2).
-Да ce МаркИраТ MecTaTa 3a npOБиВанe (pnc.5.3).
-Да ce npobnT dynknte n da ce noctabrt нобелte (ckpntu kaebeni pnc. 5.4).
-Да ce npo6nT dynknte n da ce noctabrt nIO6nTe (c noIOnKKn npu otKpTu Ka6en pnc.5.5).
- Ka6eInte da ce cbbpxkat (pnc. 5.6).
- KIeMnTe Da ce CBbpxKaT (pnc. 5.7).
- KopnycT Ha JAmnata (A) Da ce NoctaBn Ha CTOnKaTa 3a CTeHa (C). Da ce CJIeJr KJIeMInTe IN NO3NtTa Ha CEH3Opa (Pnc. 5.8).
- Kopnycby Ha JamaNaTa Da ce fukncpa C BnHTObe (pnc. 5.9).
- EneKtpo3axpaHbAHeTo Da Ce BKNIOuN (pnc. 5.10).
- Да се наразов rat Habстpoик (само S) → "6.Функци".

6.ФункциN

Clek KaTo KOpNycbTe MOHTnpaH N CBbp3BaHeTO KbM MpeKaTa e OcbueeCTBeHO, Ceh3OpHaTaNAMMaMOKe Da 6bIe NcHata B EKcnloaTaun.

3aBODcN HAcTPOJKn (cMo S)

HaCTpoiKa Ha CBeTIOUoyBCTBNTeJIHOCTTa:
IHeBeH peXIM 2000 lyKca
HaCTpoiKa Ha BpeMeTo: 8 c

Hactpoika Ha CBetIooyBCTBNTeJIHocTtA/ npar Ha 3aIeIcTBaHe (cMo S) (pnc. 6.1)

-Бe3TeENHOrpeYnIpaHeHa npara Ha 3aEnCTBaHe Ha ceH3Opa Mekdy2-2000 lykca.
-PerynataopHa=HeBHaCBETnHa, OKoJIO 2000 lyKca.
- PerúnalopHa = cna6a cBeTnHa, okono 2 nykca.

HactpoikKa Ha BpeMeTo (cAmO S) (pnc. 6.1)

-Be3CTeNEHNOperyJInpaHeHaBpeMeTOOT8ceK.-35MNH.
-Прин Настюйка на обхва се пенирьчы д 6ьдпиЗбразнай-Kратугий Иntервал.
- PerjlaTop NaH-KpaTbK INHTepBaI = OKOJI 8 cek.
- PeryanaTop Hau-NbIbI nHTepBaI = OKONO 35 MIn.

HactpoikKa Ha 30HaTa Ha 3acuane / onpeJeIHa He 6xbata (cmo S)

• B 3aBNCIMOCT OT BnCOUHaTa Ha MOHTaK IN CNOpeH HeOBxODIMOCTTA, OxbaTbT MoKe Ja 6bJe ONTtMaJIHO peryIIPAH. NOKpNBauTo FOJIO ClyKIn 3a 3akPbBaHe Ha JKeJaHn8 bPoJ CErMeHTN OT ObeKTNbA, CbOTBETHO OxbaTa Da 6bJe INDINBvUaJIHo ckbceH, HApPIMep 3a Da CE IN3KJIIOuAT PbTEKn INN CBcEdHn NapCJI (pnc.6.2).
  -06xbatbT MoKe Ia 6bIe HAcTpoE HocpeICTBOM BepTuKaJIHO HaKJIaHRe Ha ceH3Opa (D)c 90^ MeJy 2-10 M (pnc.6.3).

Homepa Ha Kbuzn

• Homepata da ce 3aIenT c npInoxKeHnte IeneHKn (pnc.6.4).

7.Подрьжka/гржka

PpeynpeXeHne 3a onacHOCTn ot en. Tok!

KoHTaKTbT Ha BODa C yactn, nPoBeXdaun TOK, MoKe Da IOBeJe Do eNeKTpNueeCKn WOK, N3rapHnI NmCmbPT.
- YpeBbT da ce NOuchCTba cAmO cyx.

Onachoct OT uetn!

Pn n3noJ3BaHe Ha nOprpeHnNouchTbaU npenapat ypeBt MoKe Da 6bJe NoBpeDeH.
- YpeIbT da ce nouchTa C Jleko BnaXHa KbPna, 6e3 nouchBaU npenapaT.

Baxho:ypeNbT He MoXe Da 6bJe 3aMeHn.

8. OToCTpaHЯBaHe

EneKtpoypei, npHaJnEJXHocTn I ONaKOBKn Tp6Ba Da 6bDat peuKlnpaHn, C cen Ona3BaHe Ha OKoHaTa Cpea.

He n3XbIpyTe eJekTpoyeDn c o6uNTe domaHn OTnaDbu!

Camo 3a cTpaHn ot EC:

CnpedJeCTBaUaTa DnpeKtNbHa Ha EC 3a cTapn eJektpoHHn EJekTpOpyPeuN TpaHCNoHpaHeTo B HauHOHaHo npaBO, eJekTpOpyPeuN, KOITOnOBeHe He Moat Da 6bDat yNtpe6BaHN, Tp6Ba Da 6bDat pa3dElnHO Cb6upaHn N peuKlmpaHn, C ceJ Ona3BaHe Ha OKoJHaTa Cpea.

9. rapaHcIy OT npOn3BODnteJIa

To3n npOdyKT Ha Steinel e npOn3BedeH c HauTROJMAO CTapaHne, npOBepen e 3a fynHKUHOHaJIHOCT N 6e3OpaNCHOCt, CnpoE JdeIcTBaUHTe pa3nope6b, CJeI KOeTO e IIOJIOXeH Ha KaueCTBeH KOHTPOJ, Ha npInuHa Ha clyuaHnHa n36Op. STEINEL rapaHTnpa nepfekTHa n3pa60TK a fynKUHN. FapAHnraTa e c npOdbJxKITeHOCt 36 Meceua n 3aNoyBa OT DeHЯ Ha NOKyPkata. Hne OTCpaHЯBaMe DeFekTN, npUnHHeH ON TpEwKn B npOn3BODCTBOTO INI KaueCTBOTO Ha MaTePnAJa, peMOHTN

paKn nn 3aMeHn DepeKTHTe Yactn, no Haun36op. IapaHuaTa He Baxn 3a uetn nno HocBaun Ce aactn, KaTOn n 3a uetn n depeKtn, noJyueHn B pe3yUtaT ha HnpabuHa ynotpeBa nn npdpbXkKa. NocJeDaun uetn Ha uXkDn npedMetn Ca n3KJIIOHeHn OT rapaHuaTa.

IapaHnraTa e BaJnHa cAmO, aKO Hepa3rIo6eHNrYpei 6bJe n3npaTeH Ha CbOTBeTHncaepBn3,do6pe oNaKOBaH nPnPdpyKeH OT KpaTKo OnncAHe Na DeFeKeTa, Kacoba BeIexKa uNn paKtypa (DaTa H NOKyPkA u Nechat Ha TbproBeu).

PemOHTeH cepBn3:

Cnei n3TuHaHe Ha rapaHcnaTa IIn npn DepeKtn, HeNOKpNTn OT rapaHcnaTa, NOnNTaIe B Hau-6n3Kn 3aBOdCKn CepBn3 3a Bb3MOxHocTnTe 3a peMOHT.

TOJINH TAPAHUNAOT PON3BOIDTEI

10. TexHnueckn daHHN