Tone Pro HBS780 - Earplug LG - Free user manual and instructions

USER MANUAL Tone Pro HBS780 LG

Contact ofce for compliance of this product : LG Electronics Inc. EU Representative, Krijgsman 1, 1186 DM Amstelveen, The Netherlands1 ENGLISH Using LG TONE PRO™ Copyright © 2017 LG Electronics. All Rights Reserved NOTE: For the best performance and to prevent any damage to, or misuse of the HBS-780, please read all of the information carefully prior to using the HBS-780. Any modications or changes to this manual due to typographical errors or inaccuracies of stated information shall only be made by LG Electronics Inc. The LG TONE PRO (HBS-780) is a lightweight wireless stereo headset that uses Bluetooth technology. This product can be used as an audio accessory for devices supporting either the A2DP or Hands-Free Bluetooth prole. Safety Cautions

CAUTION Do not disassemble, adjust, or repair the product arbitrarily.Do not place the product near excessive heat or ammable material.Do not arbitrarily replace the battery, as it may explode.The product may be damaged if an incompatible charger is used.Make sure that an infant or child does not swallow a magnet or a small component of the product.Make sure that foreign objects do not enter the charger’s connectors (charging port and power plug). Failure to do so may result in re or electric shock.For your safety, do not wear the product while it is being charged.If you have a medical device implanted, contact your doctor before using this device.Do not pull the earphone cable with excessive force.For your safety, do not remove the battery incorporated in the product.The lithium-ion polymer battery is a hazardous component that can cause injury.Battery replacement by an unqualied professional can cause damage to your device.Do not replace the battery by yourself. The battery can be damaged, which can cause overheat and injury. The battery must be replaced by authorized service provider. The battery should be recycled or disposed separately from household wastes.In order to prevent unnecessary energy consumption, disconnect the device when fully charged. Always use an easily accessible power-outlet for charging your device.2

WARNING Do not drop the product from a high place. Make sure there is no water, alcohol, or benzene in contact with the product. Do not store the product in a wet or dusty place. Do not place heavy objects on the product. This product is not waterproof. Avoid humidity and water. NOTE If the product is exposed to excessive sweat, clean the product. Keep the earbuds clean. HD Speaker If the communication network of the device you are connecting to supports HD Voice Calling, you can enjoy making voice calls and listening to music in high denition. Qualcomm® aptX™ Audio LG HBS-780 is powered by Qualcomm aptX audio. Qualcomm aptX audio is Bluetooth wireless technology that provides clearer audio for listening to music and watching movies. Qualcomm aptX audio is automatically enabled when a mobile phone or audio device supports it.3 Product Components

(medium ear gels installed) Extra Ear Gels (small) Micro USB Charging Cable

How to pair Reference guide User Manual WEEE Card (Europe Only) NOTE: Actual product design may differ from images shown in manual. Make sure authentic LG Electronics components are used. Using a non-authentic component may damage the product and thus void the warranty.

CAUTION4 Product Description ON OFF NOTE: You will hear a sound with each press of the Volume jog switch, depending on the volume level: one beep (lower levels), two beeps (middle levels), or a long tone (higher levels). Indicator lamp Power switch Volume jog switch Previous/Next jog switch Play/Pause button Earbuds (left/right) Charging port Call button Microphone5 HBS-780 Pairing and Connecting Put in your earbuds to easily pair and connect by following the voice prompts. NOTE: If you are prompted for the authorization code (PIN code), type 0000. If you hear that the battery is insufcient, recharge the battery before proceeding with pairing. If pairing is not completed within three minutes, the power automatically turns off. If this happens, slide the Power switch from the OFF to the ON position to turn the power on. Connecting Quickly ON OFF ON OFF LG HBS780 1 From the mobile phone’s Settings menu, turn on Bluetooth. 2 Slide the Power switch towards the ON position to turn on the power. 3 The blue Indicator lamp turns on, and the HBS-780 enters Search mode. 4 From the mobile phone, select LG HBS780 to connect. 5 A voice message will indicate that the connection is completed. Connecting Manually (pairing with another phone or re-pairing) ON OFF 1 Press and hold the Call button and slide the Power switch to the ON position to turn it on. 2 The blue Indicator lamp turns on, and the HBS-780 enters Search mode. 3 Select LG HBS780 from the device list to connect.6 Multiple Connections The HBS-780 can be connected to two devices, such as a mobile phone and a computer, at the same time. NOTE: If the HBS-780 is simultaneously connected to two devices, the main functions work based on the “Main Connected Device.” 1 Press and hold the Call button and slide the Power switch to the ON position to turn it on. 2 Perform Steps 2 to 4 under “Connecting Quickly.” This device becomes the “Main Connected Device.” 3 Try to connect to HBS-780 using a previously connected device. This device becomes the “Sub Connected Device.” Automatic Reconnection If you turn on the product, it automatically searches for and connects to the “Main Connected Device” and “Sub Connected Device” to which it was previously connected. (If the product cannot nd the device to which it was last connected the product switches to Search mode.) If the product does not automatically connect to the device you want, search for your product in the device you want to connect to and connect it manually. Indicator Lamp HBS-780 Status Description Power On The blue Indicator lamp ashes four times. Power Off The blue Indicator lamp ashes four times. Search Mode The blue Indicator lamp is on. Headset/Hands-free Prole Connected/Call Connected The blue Indicator lamp ashes once every ve seconds.7 Mobile Calling Functions Function Status Description Answering Call Ringing Briey press the Call button. NOTE: The HBS-780 will not vibrate if the Vibration function has been turned off. Making a Call Idle If you make a call using a mobile phone, the call is automatically connected to the HBS-780. On some mobile phones, you should briey press the Play/Pause button twice to switch calls. Switching Calls Talking Briey press the Play/Pause button twice during a call. (Every time you press one of these buttons, the call switches to the mobile phone or the HBS-780.) Redial Idle Press and hold the Call button for more than one second to place a call to the last number you called. Voice Dial Idle Briey press the Call button. If the mobile phone does not support the Voice Dial function, you can use the Redial function. Receiving a Call While on the Phone Talking You can receive another call while on the phone by pressing and holding the Call button for one second. The existing call switches to a call waiting status. Press and hold the Call button again for one second to switch back to the previous call. Briey press the Call button to end the existing call; briey press it again to end the second call. (Performance may differ depending on the mobile phone settings.) Rejecting a Call Ringing Press and hold the Call button for two seconds. Enabling/Disabling Mute Talking Simultaneously slide and hold the Volume jog switch into the volume up ( ) direction, and slide and hold the Previous/Next jog switch into the ( ) position for one second.8 CAUTION: Do not disable/enable the mute function while driving, as you need to use both hands. NOTE: The Voice Dial and Redial functions work on the Main Connected Device or on the device on which you made the last call. (The Voice Dial and Redial functions may work differently depending on the mobile phone being used.) Playing Music Function Status Description Play Idle Briey press the Play/Pause button. Music will play from the activated player of the connected device. Pause Music on Briey press the Play/Pause button. Play Previous/Next Song Music on To play the next or previous song, briey slide the Previous/Next jog switch into the Previous ( ) or Next ( ) position. Fast Rewind/Forward Music on Slide the Previous/Next jog switch into the ( ) or ( ) position until you reach the desired section of the track. Change Equalizer Mode Music on Briey press the Play/Pause button twice. The equalizer mode changes with a beeping sound in the following order: Bass Boost (default) > Normal > Treble Boost. Switching Music Players If you stop in the middle of playback and then play music on either of the two connected devices, the HBS-780’s music playback and control change to that device.9 Battery Charging and Alerts Open the Charging port cover and connect the charger to the Charging port. Indicator Lamp Red Purple Blue Battery Status Charging 80% Completed Slide and hold the Volume jog switch in the volume down ( ) direction for one second to check the Indicator lamp and battery level by voice. Battery Status Sufcient Normal Insufcient Indicator Lamp Blue ashes three times Purple ashes three times Red ashes three times Vibration Alert Settings 2 sec The vibration alert is automatically set to the ON when you turn on the power. To activate or deactivate the vibration setting, slide and hold the Volume jog switch in the volume up ( ) direction for two seconds. NOTE: When vibration is turned off, the HBS-780 will not vibrate when receiving an incoming call.10 Out of Range If the device connected to the product is out of effective communication range (33 feet/10 meters), the communication signal becomes weak and the communication is lost. If the device comes back within effective communication range, the product automatically reconnects to the device. If the device is not automatically reconnected, press the Call button on the product to connect to it manually. If a device that is not in use goes out of communication range when multiple devices are connected, a voice message will indicate that the connection is lost. In this case, the automatic reconnection function is not supported. LG Tone & Talk™ Tone & Talk supports various functions, including text & voice directions and calling. To install Tone & Talk, scan the QR code to the right or go to the Google Play™ store and search for “LG Tone & Talk.” NOTE: Tone & Talk can be used on Android™ smartphones. Function Button/Description HBS-780 Action Reading Recent Messages Previous/Next jog switch Slide to and hold in the ( ) position for one second. Using Speed Dial to Make a Call Select a speed dial contact in Tone & Talk. - Call button (Making a call) Briey press twice. Using Favorites to Make a Call Select a favorite contact in Tone & Talk. - Call button (Bringing up a favorite contact) Briey press twice. Select a contact with the Previous/Next jog switch. Slide to and hold in the ( ) or ( ) position for one second. Call button (Making a call) Briey press twice.11 Making a Call From Call History Select call history in Tone & Talk. - Call button (Bringing up call history) Briey press twice. Slide and hold the Previous/Next jog switch to select a Call History number. Slide to and hold in the ( ) or ( ) position for one second. Call button (Making a call) Briey press twice. Current Time Alert/Voice Memo Previous/Next jog switch (This feature may not be supported on some devices.) Slide to and hold in the ( ) position for one second. Changing the Voice Prompt Language Select Headset Setting

Reference guide Referenční příručka Oversigtsvejledning Manuel de référence Οδηγός αναφοράς Referenzhandbuch Kezelési útmutató Guida di riferimento Naslaggids Poradnik użytkownika Guia de consulta Guía de referencia Referenčná príručka Referensguide Ghid de referinţă Referans Kılavuzu 參考指南1 Declaration of Conrmation FCC NOTICE TO USERS: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the manufacturer (or party responsible) for compliance could void the user’s authority to operate the equipment. FCC Part 15.105 statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. ENGLISH Reference Guide2 IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void the user’s authority to operate the device. DECLARATION OF CONFORMITY: Hereby, LG Electronics declares that this HBS-780 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be found at http://www.lg.com/global/declaration Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide. Qualcomm® aptX™ audio is a product of Qualcomm Technologies International, Ltd.

Additional Information

1. Radio frequency exposure

This Bluetooth Wireless Stereo Headset HBS-780 is a radio transmitter and receiver. When in operation it communicates with a Bluetooth equipped mobile device by receiving and transmitting radio frequency (RF) electromagnetic elds (microwaves) in the frequency range 2.4 to 2.4835 GHz. Your Bluetooth headset is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used with any compatible LG Electronics mobile phone.

Bluetooth Connection Precautions The following environments affect the range and reception of Bluetooth signals: - When walls, metal, human bodies, or other obstacles exist between the Bluetooth device and the connected device - When equipment that uses 2.4 GHz frequency signals (Wireless LANs, wireless phones, microwave ovens, etc.) is placed near the devices being used3

3. Potentially explosive atmosphere

Turn off your electronic device when in any area with a potentially explosive atmosphere. It is rare, but your electronic device could generate sparks. Sparks in such areas could cause an explosion or re resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.

4. Battery information

A rechargeable battery has a long service life if treated properly. A new battery or one that has not been used for a long period of time could have reduced capacity the rst few times it is used. Do not expose the battery to extreme temperatures, never above +50° or below -10°. For maximum battery capacity, use the battery in room temperature. If the battery is used in low temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures between +10° and +45°. Removal of waste batteries and accumulators (Product with embedded battery ONLY) - In case this product contains a battery incorporated within the product which cannot be readily removed by end-users, LG recommends that only qualied professionals remove the battery, either for replacement or for recycling at the end of this product’s working life. To prevent damage to the product, and for their own safety, users should not attempt to remove the battery and should contact LG Service Helpline, or other independent service providers for advice. - Removal of the battery will involve dismantling of the product case, disconnection of the electrical cables/contacts, and careful extraction of the battery cell using specialized tools. If you need the instructions for qualied professionals on how to remove the battery safely, please visit http://www.lge.com/global/sustainability/environment/take-back-recycling.

5. Recycling the battery in your

Bluetooth Headset The battery in your Bluetooth Headset must be disposed of properly and should never be placed in municipal waste. Disposal of waste batteries/accumulators 1 This symbol may be combined with chemical symbols for mercury (Hg), cadmium (Cd) or lead (Pb) if the battery contains more than 0.0005% of mercury, 0.002% of cadmium or 0.004% of lead. 2 All batteries/accumulators should be disposed separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.4 3 The correct disposal of your old batteries/accumulators will help to prevent potential negative consequences for the environment, animal and human health. 4 For more detailed information about disposal of your old batteries/accumulators, please contact your city ofce, waste disposal service or the shop where you purchased the product.

- The warranty is valid only if the original receipt issued to the original purchaser by the dealer, specifying the date of purchase and serial number, is presented with the product to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the product from the dealer. - If LG Electronics repairs or replaces the product, the repaired or replaced product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of LG Electronics. - This Warranty does not cover any failure of the product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with instructions for use and maintenance of the product. Nor does this warranty cover any failure of the product due to accident, modication or adjustment, acts of God or damage resulting from liquid. - This warranty does not cover product failures due to improper repair installations, modications or service performed by a non-LG Electronics authorized person. Tampering with any of the seals on the product will void the warranty. Limited Warranty SUBJECT TO THE CONDITIONS OF THIS LIMITED WARRANTY, LG ELECTRONICS WARRANTS THIS PRODUCT TO BE FREE FROM DEFECTS IN DESIGN, MATERIAL AND WORKMANSHIP AT THE TIME OF ITS ORIGINAL PURCHASE BY A CONSUMER, AND FOR A SUBSEQUENT PERIOD OF ONE (1) YEAR. SHOULD YOUR PRODUCT NEED WARRANTY SERVICE, PLEASE RETURN IT TO THE DEALER FROM WHOM IT WAS PURCHASED OR CONTACT YOUR LOCAL LG ELECTRONICS CONTACT CENTER TO

GET FURTHER INFORMATION.5

Important Safety Information Avoiding hearing damage Permanent hearing loss may occur if you use your Handsfree car kit at a high volume. Set the volume to a safe level. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or mufed speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected. Hearing experts suggest that to protect your hearing:

• Limit the amount of time you use Headset at high volume.

• Avoid turning up the volume to block out noisy surroundings.

English Disposal of your old appliance 1 This crossed-out wheeled bin symbol indicates that waste electrical and electronic products (WEEE) should be disposed of separately from the municipal waste stream. 2 Old electrical products can contain hazardous substances so correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. Your old appliance may contain reusable parts that could be used to repair other products, and other valuable materials that can be recycled to conserve limited resources. 3 You can take your appliance either to the shop where you purchased the product, or contact your local government waste ofce for details of your nearest authorised WEEE collection point. For the most up to date information for your country please see www.lg.com/global/recycling.