Koenic KVR 4120 - Broom

KVR 4120 - Broom Koenic - Free user manual and instructions

Find the device manual for free KVR 4120 Koenic in PDF.

📄 74 pages English EN 💬 AI Question
Notice Koenic KVR 4120 - page 15

Questions des utilisateurs sur KVR 4120 Koenic

0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.

Poser une nouvelle question sur cet appareil

L'email reste privé : il sert seulement à vous prévenir si quelqu'un répond à votre question.

Aucune question pour l'instant. Soyez le premier à en poser une.

Download the instructions for your Broom in PDF format for free! Find your manual KVR 4120 - Koenic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KVR 4120 by Koenic.

USER MANUAL KVR 4120 Koenic

Innovation GmbH
Sollwandelstrasse 5, PAB-40167 Aachen
Germany
www.innovation. htm.com
40167 Aachen, Germany

(2)

C∈

Koenic KVR 4120 - 1

Rechargeable Vacuum Cleaner

XY3412

C. Cianis, aromatists,
cyclo, cyclo,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C.Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly,
C. Cunlly

Koenic KVR 4120 - 2

Caaah 8

10004-10
fivih15.30
10011-106
Fur 72-39
Magu 10-10
Kan 8-64
Kolodny 50-30
Rostai 30-30
Rus 60-68
Suzuki 68-70

Koenic KVR 4120 - 3

()

Sicherheitshinweise

KataoyoocEgaptnmuatuwv

A EvéikTIkeç λuxvieç LED ελEyxou φöptiŋs
B KoupiévepyoToinan/antevepytoinan
Koupii aaoaiaionc
EtnavaΦoptiζóμενn μπatapia
E NepiEKTng oKovnG ME UTOOxEc fiATpou KAI KOUPTI aTaaQaianG
F
GΦoptiOTHC
H Bpaxiovas yia atnpi n atov toixo
Akpofuo yia TaTeoapieC
1 Akpofoio yia xapaaabc
K Akpofoio yia daneda je Tepiotpeoevn Bouptaa

Συνδεσμολογία

Bpaxiovac via otnpicn oTov toixo

Eik.1 Eav xpeiaZeta, toToeTnOte eEvav Toixo Tov Bpaxiova yia otnpiGn OTOV Toixo. PooEETe TIG aTOoTAoeiC KAI TIG diaoTaoeiG.

EIK.2 Oi diaotaeic twv anapaitnttwovouta kai Biow (Tepieoxovtai) utapxouv otnv Eikova etiaokotnong. KaTa Tny Toioetnon oToV toixo, npTei va diatnpeiTai n aToaan eTaSuTwv onw. PwTa onpaeduote TIC OTcdiavoiNc.

XwpntiokToTnTa TEPiEKTn,0.3L

okovnC

Tpofoobotiko

MovTeλo:MC2508A-V

OvopaataikTao : 100 - 240V ~

ειδδου 50-60 Hz 0,8 A

OvopaotikTao 25-29V-800mA

εξδδou

Kaaan npoTaaiag : II

AviEwion npoBnμatuw

Eav unapEouv TpoBAneta kata Tn aeitoupyia, avatpeTe oTov npakatw nivaka. Eav dev evai duvatn n eniAuon Tuv TpoBAnpatw otWc untOeikVuet aTn OTn Aoun, etIKoivwwnte ME TOV kataokueaotn.

  • This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given instructions concerning the use of the appliance in a safe way and understand the hazards involved or are under supervision.
  • Children shall not play with the product.
  • Cleaning and user maintenance shall not be carried out by children unless they are supervised.
  • If the cord of the charger is damaged the charger must be scrapped.
  • Only use the provided charger for charging.
  • Follow the instructions in the chapter Cleaning and care.

  • Read this user manual thoroughly before first use and pass it on with the product. Pay attention to the warnings on the product and in this user manual. It contains important information for your safety as well as for the use and maintenance of the equipment.

  • Never leave the product unsupervised while it is switched on.
  • Do not place any objects on top of the product.
  • Never immerse electrical parts of the product in water or any other fluid during cleaning or operation. Never hold the product under running water.
  • Do not under any circumstances (e.g. damaged power cord, product has been dropped etc.) attempt to repair the product yourself. For servicing and repairs, please consult an authorised service agent.

The mains voltage must match the information on the rating label of the product.
- Only unplugging from the power socket can separate the product completely from the mains. Please be sure that the power plug is in operable condition.
- Avoid damages to the charging cable that may be caused by kinks or contact with sharp corners.
- Keep this product including charging cable and power plug away from all heat sources, e.g. ovens, hot plates and other heat-producing products/objects.
- Only unplug from the power socket by the charger itself. Do not pull on the cord.

English

Safety instructions

Unplug the product ...

  • when the product is not being used,
  • in case of malfunctions,
  • before attaching / detaching accessories and
  • before cleaning the product.

  • Use this product in dry indoor areas only and never outdoors.
    This product is not intended for commercial use. It is designed for household use only.

  • Do not allow the product to operate unsupervised.
    Make sure that the motor unit and charger incl. power cord do not become wet.
  • Use accessories supplied with the device or recommended by the manufacturer only!
    This product is suitable only for private use.
    Always switch the product off before disconnecting it from mains supply.
  • Let the product cool down sufficiently before storing.
  • Do not cover the product while in use. Fire hazard!
  • Do not suck up lit cigarettes, hot ashes, matches, etc. Fire hazard!
  • Do not suck up inflammable or explosive materials and gases. The product must not be used in rooms that contain explosive gases or liquids.
  • Be especially careful when cleaning any kind of stairs.
  • When in use, keep the product away from clothes and body parts (fingers, hair, face).

  • Do not try to clean people or animals with the product.

  • Only use the charging adapter provided to charge the product.
  • Never expose the product/rechargeable batteries to excessive heat (e.g. bright sun, fire), and never throw them into fire. The rechargeable batteries could explode.
  • Never short-circuit the contacts of the rechargeable battery. Do not throw the rechargeable battery or the product into fire. There is a danger of fire and explosion!
  • Never charge the rechargeable battery of the product unattended.

Congratulations!

Thank you for your purchase of a KOENIC product. Please read this manual carefully and keep it for future reference.

Intended use

The vacuum cleaner is designed only to vacuum dry dust and dirt. Using it for anything else can damage the device or cause injury.

Before first time use

Remove the product and accessories carefully from the original packaging. It is recommended to keep the original packaging for storage. If you wish to dispose of the original packaging, please observe applicable legal provisions. Should you have any questions regarding proper disposal, contact your local waste management center.

Inspect the delivery contents for completeness and damages. Should the delivery contents be incomplete or damaged, contact your sales outlet immediately.

After unpacking, please refer to chapter

Cleaning and care.

Before first time use the built-in batteries must be charged for at least 4 hours, please refer to chapter Charging batteries.

Koenic KVR 4120 - Cleaning and care. - 1

Do not dispose of this product as unsorted municipal waste. Return it to a designated collection point for the recycling of WEEE.

By doing so, you will help to conserve resources and protect the environment. Contact your retailer or local authorities for more information.

Koenic KVR 4120 - Cleaning and care. - 2

Please dispose of batteries in an environmentally friendly manner. Do not put batteries into the household waste.

Please use the return and collection systems in your community or contact the dealer where you purchased the product.

Content

1 x Vacuum cleaner
1 x Rechargeable battery
1 x Floor nozzle
1×Crevicenozzle
1 x Upholstery nozzle
1xTube
1 x Charger
1 x Wall bracket
1 x User manual
1 × Warranty card

Part list

A Charging control LEDs
B On/Off switch
C Release button
D Rechargeable battery
Dust container with filter inserts and release button
F Tube
G Charger
H wall bracket
1Upholstery nozzle
1 Crevize nozzle
K Floor nozzle with rotating brush

English

Assembly

Wall bracket

Fig. If needed, attach the wall bracket to a wall. Please note the distances and dimensions.

Fig. 2 The dimensions of the required dowels and screws (included) can be found in the overview picture. When mounting on the wall, the distance between the holes must be maintained. Mark the drill holes beforehand.

Note: Before screwing on the wall bracket, make sure that there is a socket for the charger.

Koenic KVR 4120 - Wall bracket - 1

Warning!

Make sure there are no power lines or other wires or pipes in the wall where you want to drill holes for the wall bracket. There is danger to life if you drill a live cable!

Fig. 3 The minimum height of the wall bracket must be selected so that the floor nozzle can hang freely downwards.

Fig. 4 Crevice and upholstery nozzle can also be hung on the wall bracket.

Charging batteries

Fig. 5 Slide the battery into the device. Make sure it is locked in place. It will be indicated by a click sound.

Fig. 6 Plug the charger into the socket. Plug the charging plug into the charging socket.

The charging indicator LEDs flashing in blue indicate that the battery is being charged. The indicator continuously shines in blue, when the battery is fully charged.

LED indicator

LED Condition
1 LED on, flashingDuring operation, when battery level is low
Running light, 3 LEDsDuring charging
Steady on, 3 LEDsCharging completed. Fully charged

Fig.7 Connect the floor nozzle to the lower end of the suction tube and then connect the tube to the vacuum cleaner.

Upholstery nozzle and crevice nozzle

Fig.8 Both nozzles can either be connected directly to the vacuum cleaner or onto the suction tube end. When attaching them, always insert the respective nozzle as far as possible so that it snaps into place.

To vacuum upholstered furniture, mattresses, pillows, curtains, etc., use the upholstery nozzle. The brush can be pushed back whereby a lint brush is available.

To vacuum wrinkles, joints and corners, use the crevice nozzle.

Vacuuming

Using handstick vacuum cleaner

Fig.9 Press the On/Off button to turn on the product. The operation indicators on the floor nozzle light up and indicate that the brush roller is turning.

Koenic KVR 4120 - Using handstick vacuum cleaner - 1

Warning!

When the vacuum cleaner is left standing, it must be switched off, because if the brush is turning while the product is standing, it could cause damage to the floor surface.

After vacuuming, press the On/Off button to turn off the product.

Cleaning and care

Koenic KVR 4120 - Cleaning and care - 1

Warning!

  • When cleaning the product, never use solvents or abrasive materials, hard brushes, metallic or sharp objects.
    Solvents are harmful to human health and can attack plastic parts, while abrasive cleaning mechanisms and tools may scratch the surface(s).
  • Never immerse any electrical parts of the product in water or in other liquids during cleaning. Never place it under running water.

Emptying dust container and cleaning filters

Note: The dust container should be emptied every time after vacuuming.

Koenic KVR 4120 - Emptying dust container and cleaning filters - 1

To empty the dust container, press the dust container bottom release button so that the bottom lid of the container opens and the dust falls out. Hold the dust container over a dustbin. If the filter and dust container are relatively clean, close the lid again so that it snaps into place. The vacuum cleaner is ready for use.

Koenic KVR 4120 - Emptying dust container and cleaning filters - 2

For better cleaning, loosen the dust container and remove it. Remove the complete filter element and the fine filter. Empty the dust from the dust container and tap the filters. The filter element and dust container can also be rinsed with water if completely dried afterwards. When cleaning the elements with water, make sure that they are completely dry before re-assembly.

Mount all previously removed components. The assembly is done in reverse order. When assembling make sure that no seal is lost or crushed and that no parts are jamming.

Koenic KVR 4120 - Emptying dust container and cleaning filters - 3

Regularly clean the exhaust air side paper filter (Hepa filter). Turn off the cap and remove the paper filter. Tap the paper filter thoroughly. Under no circumstances should the paper filter get wet. The assembly is done in reverse order.

Cleaning floor nozzle

Koenic KVR 4120 - Cleaning floor nozzle - 1

The floor nozzle should be cleaned at regular intervals. To clean it, release the floor nozzle from the handstick vacuum cleaner. Push the clip to remove the latch.

Take out the brush roller from the nozzle. Cut through threads and hairs wounded round the rollers using scissors and remove them.

Note: If the wheels are blocked with threads and hairs, use scissors to carefully remove the blockage.

Re-assemble all of the components that have previously been removed. Assembly is carried out in reverse order.

English

Note:

  • Floor nozzles are subject to a certain amount of wear, depending on the type of hard floors you have (e.g. rough, rustic tiles). Therefore, you must check the underside of the floor nozzle at regular intervals.
  • Worn undersides of floor nozzles may have sharp edges that can damage sensitive hard floors, such as parquet or linoleum. The Imtron GmbH does not accept any responsibility for damage caused by worn floor nozzles.

Technical data

Re-chargeable vacuum cleaner

Rated voltage: 21.6 V

Vacuum power:Max.120W

Battery charging time : 3.5 hrs.

Dust container capacity: 0.3 L

Power adaptor

Model:MC2508A-V

Rated Input : 100 - 240 V ~

50-60 Hz 0.8 A

Rated output : 25-29V

800mA

Protection class : II

Troubleshooting

If there are any problems during operation, please refer to the following table. If problems cannot be solved as indicated under Solution, please contact your manufacturer.

Problem Possible causes Solution
Product does not work• Interrupted power supply • Battery is empty• Check the power supply • Re-charge battery
Product cannot absorb dust or loose suction power• Filters are blocked with dirt • Dust container full, exceed MAX marking • Tube blocked• Clean and wash the filters • Empty dust container • Remove blockage from tube
Rolling brush does not work• Brush is blocked with threads and hairs• Cut and remove the threads and hairs from the brush
Floor nozzle difficult to move or get jammed• Wheels are blocked with threads and hair• Remove them carefully by using a flat screwdriver

Sila ssania: Maks. 120 W

Carregar as baterias

Manual assistant
Powered by ChatGPT
Waiting for your message
Product information

Brand : Koenic

Model : KVR 4120

Category : Broom