MICHELIN MPX 130 BW - Pressure washer

MPX 130 BW - Pressure washer MICHELIN - Free user manual and instructions

Find the device manual for free MPX 130 BW MICHELIN in PDF.

English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

Pick your language and provide your email: we'll send you a specifically translated version.
Product typeHigh pressure cleaner
BrandMichelin
ModelMPX 130 BW
Maximum pressure13 MPa
Nominal pressure10 MPa
Water flow6,2 L/min
Power consumption1,7 kW
Power supply220-240 V / 50-60 Hz
Motor protectionIPX5
Insulation classF
Weight27 kg
Guaranteed sound pressure level87 dB(A)
Recoil force10,2 N
Max water supply temperature50 °C
Max water supply pressure1 MPa
Safety devicesSafety valve, gun safety, thermal protection
FunctionsPressure adjustment, detergent distribution, rotating nozzle, automatic shut-off (TSS)
Included accessoriesLance, gun, rotating nozzle, brush, hose reel
MaintenanceCleaning suction filter, motor unblocking, winter storage

Frequently Asked Questions - MPX 130 BW MICHELIN

How to start the Michelin MPX 130 BW pressure washer?
To start, fully open the water supply tap, unlock the gun safety, hold the gun open for a few seconds, then switch the power switch to ON. Ensure sufficient water supply.
How to use detergent with this device?
Fill the detergent tank (high biodegradability). Set the adjustable nozzle to '■' position to distribute detergent. Use the regulator (F) to dose the amount. Do not use incompatible detergents.
What to do if pressure is insufficient?
Check if the nozzle is worn, clean the suction filter (L), ensure water supply is full, purge air from pump by running the gun until a continuous jet, and adjust the adjustable nozzle.
How to clean the nozzle?
Remove the lance from the gun, use the cleaning tool (C1) provided to remove dirt from the nozzle hole.
What to do in case of motor blockage?
If the motor is blocked after prolonged stop, use the tool (M) to turn the motor shaft through the rear hole (on equipped models).
How to store the device in winter?
Run the device with antifreeze liquid non-aggressive and non-toxic. Store in a dry and frost-free place.
What are the essential safety precautions?
Never direct the jet at people or animals, do not spray flammable liquids, do not touch the plug with wet hands, unplug before any intervention, and wear protective goggles and clothing.
How does the TSS device work?
The TSS (Total Stop System) automatically stops the motor when the gun is closed and restarts it when opened. Wait 4 to 5 seconds between closing and opening for proper operation.
How to clean the suction filter?
Before each use, check the suction filter (L) and clean if necessary. Remove it and rinse with clean water.
What to do if the motor does not start?
Check the mains voltage and plug. If the motor stops during use, wait 2-3 minutes for thermal protection. If the problem persists, contact an authorized service center.

User questions about MPX 130 BW MICHELIN

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Pressure washer in PDF format for free! Find your manual MPX 130 BW - MICHELIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MPX 130 BW by MICHELIN.

USER MANUAL MPX 130 BW MICHELIN

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : MICHELIN

Model : MPX 130 BW

Category : Pressure washer