W 9125 Quick - Grinder METABO - Free user manual and instructions

Frequently Asked Questions - W 9125 Quick METABO

USER MANUAL W 9125 Quick METABO

Original instructions

1. Declaration of Conformity

We, being solely responsible: Hereby declare that these angle grinders, identified by type and serial number 1 , meet all relevant requirements of directives 2 and standards 3 . technical documents for 4 - see Page 4.

For UK only:

UK We as manufacturer and authorized person to compile the technical file, see *4) on page 4, hereby declare under sole responsibility that these angle grinders, identified by type and serial number *1) on page 3, fulfill all relevant provisions of following UK Regulations *2) S.I. 2016/1091, S.I. 2008/1597, S.I. 2012/3032 and Designated Standards EN 60745-1:2009+A11:2010, EN 60745-2-3:2011+A2:2013+A11:2014+A12: 2014+A13:2015, EN IEC 63000:2018.

2. Specified Use

The angle grinders, when fitted with original Metabo accessories, are suitable for grinding, sanding, abrasive cutting-off operations and wire brushing metal, concrete, stone and similar materials without the use of water.

WEV 15-125 Quick HT, WEV 17-125 Quick Inox, WEV 17-125 Quick Inox RT is additionally suited for light polishing work. We recommend using our angle polisher for demanding polishing work in continuous operation.

Machines with the designation WEV are particularly suited for working with wire brushes due to thumbwheel for speed selection.

The user bears sole responsibility for any damage caused by inappropriate use.

Generally accepted accident prevention regulations and the enclosed safety information must be observed.

3. General Safety Instructions

For your own protection and for the protection of your power tool, pay attention to all parts of the text that are marked with this symbol!

WARNING - Reading the operating instructions will reduce the risk of injury.

WARNING Read all safety warnings and instructions. Failure to follow all safety

warnings and instructions may result in electric shock, fire and/or serious injury.

Keep all safety instructions and information for future reference.

Pass on your power tool only together with these documents.

4. Special Safety Instructions

4.1 SafetyWarnings Common for Grinding, Sanding, Wire Brushing or Abrasive Cutting-Off Operations:

Use

a) This power tool is intended to function as a grinder, sander, wire brush or cut-off tool. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. WEV 15-125 Quick HT, WEV 17-125 Quick Inox, WEV 17-125 Quick Inox RT can also be used as polishing tool.
b) Operations such as polishing are not recommended to be performed with this power tool. Operations for which the power tool was not designed may create a hazard and cause personal injury. (Does not apply to WEV 15-125 Quick HT, WEV 17-125 Quick Inox, WEV 17-125 Quick Inox RT.)
c) Do not use accessories which are not specifically designed and recommended by the tool manufacturer. Just because the accessory can be attached to your power tool, it does not assure safe operation.
d) The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool. Accessories running faster than their rated speed can break and fly apart.
e) The outside diameter and the thickness of your accessory must be within the capacity rating of your power tool. Incorrectly sized accessories cannot be adequately guarded or controlled.
f) Treaded mounting of accessories must match the grinder spindle thread. For accessories mounted by flanges, the armour hole of the accessory must fit the locating diameter of the flange. Accessories that do not match the mounting hardware of the power tool will run out of balance, vibrate excessively and may cause loss of control.
g) Do not use a damaged accessory. Before each use inspect the accessory such as abrasive wheels for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked wires. If power tool or accessory is dropped, inspect for damage or install an undamaged accessory. After inspecting and installing an accessory, position yourself and bystanders away from the plane of the rotating accessory and run the power tool at maximum no-load speed for one minute. Damaged accessories will normally break apart during this test time.
h) Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses. As appropriate, wear dust mask, hearing

protectors, gloves and workshop apron capable of stopping small abrasive or workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations. The dust mask or respirator must be capable of filtrating particles generated by your operation. Prolonged exposure to high intensity noise may cause hearing loss.

i) Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective equipment. Fragments of workpiece or of a broken accessory may fly away and cause injury beyond immediate area of operation.
j) Hold the power tool by insulated gripping surfaces only, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
k) Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning accessory.
I) Never lay the power tool down until the accessory has come to a complete stop. The spinning accessory may grab the surface and pull the power tool out of your control.
m) Do not run the power tool while carrying it at your side. Accidental contact with the spinning accessory could snag your clothing, pulling the accessory into your body.
n) Regularly clean the power tool's air vents. The motor's fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards.
o) Do not operate the power tool near flammable materials. Sparks could ignite these materials.
p) Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock.

4.2 Kickback and RelatedWarnings

Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or any other accessory. Pinching or snagging causes rapid stalling of the rotating accessory which in turn causes the uncontrolled power tool to be forced in the direction opposite of the accessory's rotation at the point of the binding.

For example, if an abrasive wheel is snagged or pinched by the workpiece, the edge of the wheel that is entering into the pinch point can dig into the surface of the material causing the wheel to climb out or kick out. The wheel may either jump toward or away from the operator, depending on direction of the wheel's movement at the point of pinching. Abrasive wheels may also break under these conditions.

Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions and

can be avoided by taking proper precautions as given below.

a) Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. Always use auxiliary handle, if provided, for maximum control over kickback or torque reaction during start-up.
The operator can control torque reactions or kickback forces, if proper precautions are taken.
b) Never place your hand near the rotating accessory. Accessory may kickback over your hand.
c) Do not position your body in the area where power tool will move if kickback occurs. Kickback will propel the tool in direction opposite to the wheel's movement at the point of snagging.
d) Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback.
e) Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create frequent kickback and loss of control.

4.3 SafetyWarnings Specific for Grinding and Abrasive Cutting-Off Operations:

a) Use only wheel types that are recommended for your power tool and the specific guard designed for the selected wheel. Wheels for which the power tool was not designed cannot be adequately guarded and are unsafe.
b) The grinding surface of the centre depressed wheels must be mounted below the plane of the guard lip. An improperly mounted wheel that projects through the plane of the guard lip cannot be adequately protected.
c) The guard must be securely attached to the power tool and positioned for maximum safety, so the least amount of wheel is exposed towards the operator. The guard helps to protect operator from broken wheel fragments and accidental contact with wheel and sparks which could ignite clothing.
d) Wheels must be used only for recommended applications. For example: do not grind with the side of cut-off wheel. Abrasive cut-off wheels are intended for peripheral grinding, side forces applied to these wheels may cause them to shatter.
e) Always use undamaged wheel flanges that are of correct size and shape for your selected wheel. Proper wheel flanges support the wheel thus reducing the possibility of wheel breakage. Flanges for cut-off wheels may be different from grinding wheel flanges.
f) Do not use worn down wheels from larger power tools. Wheel intended for larger power tool is not suitable for the higher speed of a smaller tool and may burst.

ENGLISHen

4.4 Additional SafetyWarnings Specific for Abrasive Cutting-Off Operations:

a) Do not "jam" the cut-off wheel or apply excessive pressure. Do not attempt to make an excessive depth of cut. Overstressing the wheel increases the loading and susceptibility to twisting or binding of the wheel in the cut and the possibility of kickback or wheel breakage.
b) Do not position your body in line with and behind the rotating wheel. When the wheel, at the point of operation, is moving away from your body, the possible kickback may propel the spinning wheel and the power tool directly at you.
c) When wheel is binding or when interrupting a cut for any reason, switch off the power tool and hold the power tool motionless until the wheel comes to a complete stop. Never attempt to remove the cut-off wheel from the cut while the wheel is in motion otherwise kickback may occur. Investigate and take corrective action to eliminate the cause of wheel binding.
d) Do not restart the cutting operation in the workpiece. Let the wheel reach full speed and carefully re-enter the cut. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece.
e) Support panels or any oversized workpiece to minimize the risk of wheel pinching and kickback. Large workpieces tend to sag under their own weight. Supports must be placed under the workpiece near the line of cut and near the edge of the workpiece on both sides of the wheel.
f) Use extra caution when making a "pocket cut" into existing walls or other blind areas. The protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback.

4.5 SafetyWarnings Specific for Sanding Operations:

a) Do not use excessively oversized sanding disc paper. Follow manufacturers recommendations, when selecting sanding paper. Larger sanding paper extending beyond the sanding pad presents a laceration hazard and may cause snagging, tearing of the disc or kickback.

4.6 Only for WEV 15-125 Quick HT, WEV 15-125 Quick Inox, WEV 17-125 Quick Inox RT: SafetyWarnings Specific for Polishing Operations:

a) Do not allow any loose portion of the polishing bonnet or its attachment strings to spin freely. Tuck away or trim any loose attachment strings. Loose and spinning attachment strings can entangle your fingers or snag on the workpiece.

4.7 SafetyWarnings Specific for Wire Brushing Operations:

a) Be aware that wire bristles are thrown by the brush even during ordinary operation. Do not overstress the wires by applying excessive load to the brush. The wire bristles can easily penetrate light clothing and/or skin.

b) If the use of a guard is recommended for wire brushing, do not allow any interference of the wire wheel or brush with the guard. Wire wheel or brush may expand in diameter due to work load and centrifugal forces.

4.8 Additional Safety Instructions:

WARNING - Always wear protective goggles.

WARNING - Always operate with two hands.

Use elastic cushioning layers if they have been supplied with the grinding media and if required.

Observe the specifications of the tool or accessory manufacturer! Protect the discs from grease or impacts!

Grinding discs must be stored and handled with care in accordance with the manufacturer's instructions.

Never use cutting discs for roughing work! Do not apply pressure to the side of the cutting discs.

The workpiece must lay flat and be secured against slipping, e.g. using clamps. Large workpieces must be sufficiently supported.

If accessories with threaded inserts are used, the end of the spindle may not touch the base of the hole on the grinding tool. Make sure that the thread in the accessory is long enough to accommodate the full length of the spindle. The thread in the accessory must match the thread on the spindle. See page 4-5 and chapter 14. Technical Specifications for more information on the spindle length and thread.

Use of a fixed extractor system is recommended. Always install an RCD with a max. trip current of 30 mA upstream. If the angle grinder is shut down via the RCD, it must be checked and cleaned. See chapter 9. Cleaning.

Damaged, eccentric or vibrating tools must not be used.

Avoid damage to gas or water pipes, electrical cables and load-bearing walls (static).

Pull the plug out of the socket before making any adjustments, converting or servicing the machine.

Metabo S-automatic safety clutch. When the safety clutch responds, switch off the machine immediately!

A damaged or cracked additional handle must be replaced. Never operate a machine with a defective additional handle.

A damaged or cracked safety guard must be replaced. Never operate a machine with a defective safety guard.

Secure small workpieces. For example, clamp in a device.

Reduce dust exposure:

Particles generated when working with this machine may contain substances that can cause cancer, allergic reactions, respiratory

diseases, birth defects or other propagation defects. Some of these substances include: Lead (in paint containing lead), mineral dust (from bricks, concrete etc.), additives used for wood treatment (chromate, wood preservatives), some wood types (such as oak or beech dust), metals, asbestos. The risk depends on for how long the user or nearby persons are exposed to the substance.

This dust must not be allowed to enter your body. Do the following to reduce exposure to these substances: Ensure good ventilation of the workplace and wear appropriate protective equipment, such as respirators able to filter microscopically small particles.

Observe the relevant guidelines for your material, staff, application and place of application (e.g. occupational health and safety regulations, disposal).

Collect the generated particles at the source, avoid deposits in the surrounding area.

Use suitable accessories for special work (see chapter 11.), thus less particles enter the environment in an uncontrolled manner.

Use a suitable extraction unit.

Reduce dust exposure with the following measures:

• Do not direct the escaping particles and the exhaust air stream at yourself or nearby persons or on dust deposits.
• Use an extraction unit and/or air purifiers
• Ensure good ventilation of the workplace and keep clean using a vacuum cleaner Sweeping or blowing stirs up dust
• Vacuum or wash the protective clothing Do not blow, beat or brush

5. Overview

See page 2.

1 "Quick"clamping nut *
2 Support flange
3 Spindle
4 Spindle locking button
5 Sliding on/off switch *
6 Hand Ie
7 Electronic signal indicator
8 Thumbwheel for selection of speed *
9 Trigger switch*
10 Switch-on lock
11 Additional handle/Additional handle with vibration damping
12 Safety cover
13 2-hole nut
14 2-hole spanner *
15 Lever for safety guard attachment

• depending on equipment/not in scope of delivery

6. Commissioning

Before plugging in, check to see that the rated mains voltage and mains frequency, as stated in the rating label, match with your power supply.

Always install an RCD with a max. trip current of 30mA upstream.

6.1 Attaching the additional handle

Always work with the additional handle attached! (11) Attach the additional handle on left or right of the machine and secure.

6.2 Attach the safety guard

For safety reasons, always use the safety guard provided for the respective wheel! See chapter11. Accessories!

Safety guard for grinding

Designed for work with roughing wheels, flap sanding pads, diamond cut-off wheels.

See illustration C on page 3.

• Push and hold the lever. (15) Place the safety guard in the position indicated. (12)
• Release the lever and turn the safety guard until the lever engages.
• Push the lever and turn the safety guard until the closed section is facing the operator.
• Make sure that the guard is placed securely: The lever must engage and you should not be able to turn the safety guard.

Use only accessories that are covered by at least 3.4 mm by the safety guard.

(Disassemble in reverse order.)

7. Attaching the grinding disc

Prior to any conversion work: Pull the mains plug from the socket. The machine must be bed off and the spindle at a standstill.

For reasons of safety, attach the cutting guard before performing cutting-off operations (see later Accessories).11.

7.1 Locking the spindle

• Press in the spindle locking button and turn the spindle by hand until the spindle locking button engages. (4) (3)

7.2 Placing the grinding wheel in position

See illustration A on page 2.

• Fit the support flange on the spindle. (2) The flange should not turn on the spindle when properly attached.
  Only W 9-100: Screw support flange with two-hole spanner onto spindle so that the small collar (with diameter 16mm ) is facing upwards.
• Place the grinding disc on the support flange. (2) The grinding disc must lay flat on the supporting flange.

7.3 Securing/Releasing the "Quick"

clamping nut (depending on features)

Securing the (1)"Quick" clamping nut:

ENGLISHen

Only attach the "Quick" clamping nut (1) to tools with "Metabo Quick System". These tools can be identified by the red spindle lock button (4) with "M-Quick" logo

Do not use the "Quick" clamping nut if the accessory has a clamping shank thicker than

7.1 mm! In this case, use the 2-hole nut (13) with 2-hole spanner (14).

• Lock the spindle (see chapter 7.1).
• Position the "Quick" clamping nut on the spindle so that the 2 lugs engage in the 2 grooves on the spindle. (1) (3) See illustration on page 2.
• Tighten the "Quick"clamping nut by turning clockwise by hand.
• Turn the grinding wheel firmly clockwise to tighten the "Quick" clamping nut.

Releasing the clamping nut (1):

Only when the "Quick" clamping nut (1) is attached must the spindle be stopped using the red M-Quick spindle locking button! (4)

• The machine continues to run after switching off.
• Press in the M-Quick spindle locking button just before the grinding disc stops. (4) The "Quick" clamping nut (1) loosens itself by around half a turn and can be removed without additional effort or tools.

7.4 Securing/Releasing the 2-hole nut (depending on features)

Securing the 2-hole nut (13):

The 2 sides of the 2-hole nut are different. Screw the 2-hole nut onto the spindle as follows:

See illustration B on page 2.

• X) For thin grinding discs:

The edge of the 2-hole nut (13) faces upwards so that the thin grinding disc can be attached securely.

Y) For thick grinding discs:

The edge of the 2-hole nut (13) faces downwards so that the 2-hole nut can be attached securely to the spindle.

Z) Only for W 9-100:

The collar of the 2-hole nut faces downwards and/or the flat surface faces upwards.

• Locking the spindle. Turn the 2-hole nut (13) clockwise using the 2-hole spanner (14) to secure.

Releasing the 2-hole nut:

• Lock the spindle (see chapter 7.1). Turn the 2-hole nut (13) anticlockwise using the 2-hole spanner (14) to unscrew.

8. Use

8.1 Adjusting the speed (depending on features)

Set the recommended speed at the thumbwheel.

(8) (small number = low speed; large number = high speed)

Cutting disc, roughing disc, cup wheel and diamond cutting disc: high speed

Brush: medium speed

Sanding plate: low to medium speed

Note: We recommend using our angle polisher for polishing work.

8.2 Switching On and Off

Always guide the machine with both hands.

Switch on first, then guide the accessory towards the workpiece.
Avoid inadvertent starts: always switch the tool off when the plug is removed from the mains socket or if there has been a power cut.
In continuous operation, the machine continues running if it is forced out of your hands. Therefore, always hold the machine with both hands using the handles provided, stand securely and concentrate.
Avoid the machine swirling up or taking in dust and chips. After switching off the machine, only place it down when the motor has come to a standstill.

Machines with slide switch:

Switching on: Push the sliding switch forward. (5) For continuous activation, now tilt downwards until it engages.

Switching off: Press the rear end of the slide switch (5) and release it.

Machines with paddle switch (with dead man function):

Switching on: Slide the switch-on lock (10) in the direction of the arrow and press the trigger (9). Switching off: Release the trigger switch. (9)

Machines with the designation W...RT: Torque activation (with dead man's lever)

Switching on: Slide the trigger switch (9) forwards and then push the trigger switch (9) upwards.

Switching off: Release the trigger switch (9).

Machines with the designation W...RT: Continuous operation (depending on features)

Switching on: Switch the machine on as described above. Now slide the trigger switch (9) forwards again and release in the front position to lock the trigger switch (9) (continuous operation).

Switching off: Push the trigger switch (9) upwards and release.

8.3 Working Directions

Grinding and sanding operations:

Press down the machine evenly on the surface and move back and forth so that the surface of the workpiece does not become too hot.

Rough grinding: position the machine at an angle of 30^ - 40^ for the best working results.

Cutting-off operations:

Always work against the run of the disc (see illustration). Otherwise there is the danger of the machine kicking back from the cut out of control. Guide the machine evenly at a speed

suitable for the material being processed. Do not tilt, apply excessive force or sway from side to side.

Wire brushing:

Press down the machine evenly.

8.4 Rotate gear housing

See illustration D on page 3.

• Disconnect from the power supply.
• Unscrew the fastening screw (a) of the lever (15). Remove the screw, lever (with its sheet metal part) and put aside.
• Unscrew the 4 gear housing screws (b).
  CAUTION! Do not remove the gear housing!
• Turn the gear housing to the desired position without removing it.
• Screw in the 4 gear housing screws (b) in the available threads! Tightening torque = 3.0Nm + / - 0.3Nm .
• Slide the spring that pushes the lever in position to the side and re-insert the lever (15) (with its sheet metal part), and fix with the fastening screw (a).

Tightening torque = 5.0Nm + / - 0.5Nm . Check the lever for correct function: it has to be under spring tension.

9. Cleaning

It is possible that particles deposit inside the power tool during operation. This impairs the cooling of the power tool. Conductive build-up can impair the protective insulation of the power tool and cause electrical hazards.

The power tool should be cleaned regularly, often and thoroughly through all front and rear air vents

using a vacuum cleaner or by blowing in dry air.

Prior to this operation, separate the power tool from the power source and wear protective glasses and dust mask.

10. Troubleshooting

Machines with VTC and TC electronics:

The electronic signal display lights up and the load speed decreases (not W...RT). (7) There is too much load on the

machine! Run the machine in idling until the electronics signal indicator switches off.

The machine does not start. The electronic signal display (7) (depends on model) flashes. The restart protection is

active. If the mains plug is inserted with the machine switched on, or if the power supply is restored following an interruption, the machine does not start up. Switch the machine off and on again.

11. Accessories

Use only genuine Metabo accessories. See page 6.

Use only accessories which fulfil the requirements and specifications listed in these operating instructions.

A Cutting guard clip / guard for cut-off grinding

Designed for work with cutting disc and diamond cutting discs. Once the cutting guard clip is fitted, the safety guard becomes a cutting guard.

B Extraction guard for cut-off grinding

Designed for cutting through stone slabs with diamond cutting discs. With nozzle for extracting stone dust using a suitable extraction unit.

C Extraction guard for surface grinding

Intended for grinding of concrete, screed, wood and plastics with diamond cup wheels and/or fibre discs and suitable sanding plates. With nozzle for extracting stone, wood and plastic dust using a suitable extraction unit. Not suitable for extracting sparks or for grinding of metals.

D Dust filter

The fine mesh filter prevents coarse particles from entering the motor housing. Remove regularly and clean.

E Hand protection

Intended for work with backing pads, sanding plates, wire brushes and support plates, sanding pads, wire brushes and diamond Drill Bits for tiles.

Install hand guard under the additional side-mounted handle.

F Multiple position bar for side handle

Permits numerous handle positions.

G Bar side handle

For a complete range of accessories, see www.metabo.com or the catalogue.

12. Repairs

Repairs to electrical tools must be carried out by qualified electricians ONLY!

If the connection lead is damaged, it must be replaced by a special connection lead.

Contact your local Metabo representative if you have Metabo power tools requiring repairs. For addresses see www.metabo.com.

You can download a list of spare parts from www.metabo.com.

13. Environmental Protection

The generated grinding dust may contain harmful substances. Dispose appropriately.

Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories.

Only for EU countries: Never dispose of power tools in your household waste! In accordance with European Directive 2012/

19/EU relating to electrical and electronic waste and implementation of national law, used electrical tools must be collected separately and disposed of in an environmentally friendly manner at recycling centres.

14. Technical Specifications

Explanatory notes on the specifications on page 4. Changes due to technological progress reserved. = max.diameter of the accessory

tmax,1 = max. permitted thickness of the clamping shank on accessory when using 2-hole nut (13) tmax,2 = max. permitted thickness of clamping shank on accessory when using "Quick" clamping nut (1) t_max,3 = roughing disc/cutting disc: max. permitted thickness of accessory
M = s p i n
l = length of the grinding spindle
n = no-load speed (maximum speed)
nV = no-load speed (adjustable)
P1 = rated input power
P2 = power output
m = weight without mains cable
Measured values determined in conformity with EN 60745.

Machine in protection class II

AC Power

• Machines with the designation WE....: Energy-rich, high-frequency interference can cause fluctuations in speed. The fluctuations disappear, however, as soon as the interference fades away.

The technical specifications quoted are subject to tolerances (in compliance with the relevant valid standards).

Emission values

These values make it possible to assess the

emissions from the power tool and to compare

different power tools. Depending on the operating conditions, the condition of the power tool or the accessories, the actual load may be higher or lower. For assessment purposes, please allow for breaks and periods when the load is lower. Based on the adjusted estimates, arrange protective measures for the user e.g. organisational measures.

Vibration total value (vector sum of three directions) determined in accordance with EN 60745:

a_h,SG = Vibration emission value (surface grinding)

a_h,DS =Vibration emission value (sanding with sanding plate)

a_h, P = Vibration emission value (polishing)

K_h,SG/DS/P = Uncertainty(vibration)

Typical A-effective perceived sound levels:

LDA =Sound -pressurelevel

LWA = Acoustic power level

K_pA , K_WA = Uncertainty

During operation the noise level can exceed 80 dB(A).

Wear ear protectors!

d 1 e t h r

Notice originale

Reservedelsestiner kan downloads pa www.metabo.com.

ah, SG = vibrationsemission (Slibning af overflader)

a_h,DS = vibrationsemission (Slibning med slibebagskive)

a_h,P = vibrationsemission (Polering)

K_h,SG/DS/P = usikkerhed(vibratio

PnHaJekHOCTN,CKOpocbBpaueHnKOTopbIX npebIwaetOnyCTHMoe 3NaueHHe,MOrYT CJOMaTbca N OTJeTeTB CTOPOHy.

HapyHbI DnAmEtp NToLunHa pa6oeryo HNCTpyMeHTa DOJHHbI COOTBETCTBOBaTb pa3MepHbIM DaHHbIM 3JeKHTPOHNCTpyMeHTa. HeBO3MOxHO o6ecneuTb 3KpaHnpOBaHne I KOHTpoJIb pa6OuX INHCTpyMeHTOB C HeBepHO paccHTaHHbIM npaMeTpamn.

e) Pa6oyne HNCTpyMeHbI C pe3b60BOB BCTaBHOn DOJHHbIB TOUHOCTn NOxOaNTb K WInΦOBaJIbHOMy WInHdJIIO 3JeHTponHcTpyMeHTa. Y pa6oynx HNCTpyMeHTOB, 3aKpeJIeHHbIX C NOMOuBIO ΦlaHcEVB, KpeENHoe OTBepCTne DOJHKHO B TOUHOCTn NOxOaNTb NO φOpMe ΦlaHaCa.

Pa6oHHe HnCTpyMeHTbI, pa3MepbI KOToPbIX He COOTBeTCTByOT 3aJHMHomy npncNOC6JIeHNIO, BpaAaTOc HepaBHomepHO, OueHb CnJIbHO

PYCCHNru

Bn6pnpuyOT mOryT npNBecTN K nOtepe KOHTpoJHaN d 3JIeKTPoHnCTpyMeHToM.

H) He nCNoIb3yIte noBpeHdeHHbIe pa6OuHe HHCTpymeHTbl. Ipepe KaHdbIM HcNoJIb3OBAHNem OcMaTpINBaIte pa6OuHe HHCTpymeHTbl: a6pa3HBHbIe KpyrN He DOJIHHbI HMeTb cKoIOB N TpeUHN, UInΦOBaIBHbIe TaPeHN - TpeUHN, N3HOca Nn CnJIbHOro HcTnpAHn, B KApDOUeTHax He DOJIHHo 6bITb BBInaBUnx Nn OBLOMBUNXc PNOBOLOUHbIX npAJeB. B Cnyae naDeHn 3LeENTPOHNCTpymeTa Nn pa6Ouyo HHCTpymeHa pOBepbTe erO pa6OTocNOC6HOCTb Nn HCNoJIb3yIte TOJbKO hCnPaBHyI pa6OuH NcHCTpymeHT. IocNe npOBepKn YcTAHOBKn pa6Ouyo HHCTpymeHa pOCJeNTe, YTObHI Hn Bbl, HN CTOraUne PRAOM JIoDN He HaxODNJNCb B 30He BpauaIOUeOcra Pa6Ouyero HHCTpymeHa, N Ha OOny MmHyTu 3AnyCTNTe HHCTpymeHT C MaKcMmaIbHOY qACTOTOB BpaueHn. IOBpeJdEHHbIe pa6Ouye HHCTpymeHTbl OblyHO JOMaOTcB X Onde TaKo IIpoBepKn.
3)ИсплььзунTe cpeДТВа ИнДИВДУаЛьНО 3aцNTы.ВЗвсIMOCTHОТ ВИд БыINOLHЯМоР pa6OTыИСпОь3унTe МACH ДЯ NOЛHО 3aцNTы Лиca, cpeDCTBA ДЯ 3aцNTы Гla3 Ил 3aцNTьe Oчн.ДЯ 3aцNTы OT MeLHIX YacTиC a6pa3NHBORO HHCTpymeHTa MATEPnAla HAnEBAIte pecnnpatop, 3aцNTьe HayshnH, 3aцNTьe NapayTHn IIN CneuAlbHbI ФapTyK.3aцNiauTe rla3a OT OTJeTaIOx NoCTOPOHNX ppeMeTOB pRn BbyINOLHeHIn pa3LIuHbIX pa6OT. PecnnpatOpbl N 3aцNTьe MACKdoJIKNHbI OTΦИbTpOBbIBaTb ПbIb, BO3HNkaOyU BO BpEmpa6OTbl.Д尼TElbHoe BO3dEiCTBVe rPOMKOrO ShyMa MoKeT npINBeCTN K notepe clyxa.
n) CneiTe 3a Tem, YTo6bI dpyrHe IIOH haxoDnIncB Ha 6e3OpacHom pacCTOHHN OT BaWero pa6oery Mecta. KaJdbI ueNoBeK, BXoJaun B pa6ooyu 3Ohy, O6a3aH HaeBaTb CpeCDtBa HNDNBnuAalbHOn 3aUnTbl. OTJeTaHOUne OCKOJIHN 3aTOOBH NJIOnobOMKn pa6oHx INCTpyMeHTOB MOrY HAnecTH TpaBMy DaKe 3a npDeJAmn pa6oey 30HbI.
K)ПиВыИОЛнHeHH pa6OT B6ln3n ChpblToH 3JIeHTponpoBODH nHn CeTeBOrKa6eH aMOrO 3JIeHTponHCTpyMeHTa DePKeHtE HHCTpyMeHT ToIbKO 3a N3OLINPOBaHHbIe NOBepxHOCTn. KOnTaKT C TOKONPOBDAuSeJ LInHNe MoKET npINBeCTn K INoaYe HAnpJKeHnHa MeTaNlUneCKHe YAcTHn IHCTpyMeHTa N BbI3BaTb NopaKeHne 3JIeHTpnueCKm TOKOM.
n) DepeHnte ceTeBOH Ka6eBbdaHn OT BpaauoUxxCra pa6OuNX HNCTpyMeHTOB. B Cnyae NOTepn KOHTPOJHaI INHCTpyMeHTOM OH MOKeT Nepepe3aTb IIN 3aTAYb CeTeBOH Ka6eB, pRi 3TOM BaUN pyKN MOrYT nonAcTb B 3OHy BpaueHn pa6Oyeo HNCTpyMeHTa.
M) HnKoIa He KlaIaIte 3JIeHTpOHHCTpyMeHT Do NOJHOOCTaHOBKn pa6Oyero IHcTpymeHa. Bpaauounscpa6ouh INHcTpymeHT MoKeT KOCHyTbCn IOBepXHOCTN, B

pe3yIbTaTe Yero BO3MOxHa NOTepra KOHTpOJa HAd 3JIeKTPoINHCTpyMeHToM.

H) He BnIouaTe 3JeHTpOHNcTpymeHT BO BpeM erO nepeHoCN. Bo3MOxHO nonaDaHne BaWei OJekDbl BO BpaUauuNCra pa6oHy INCTpyMeHT, B pe3yJIbTaTe Yero Bbl MoKeTe POnLyuHTb TpaBMy.
o) PeryIpaH OuNuae Te BeHTnlaCNoHHbIe ⅢeHN 3JIeKTPoHnCTpyMeHTa. BeHTnlaTOp DBNrTaJIe 3aTARnBaET NblB KOpNyc, a6OJIbWoE CKONJIeHHe MeTaJIInueCKOINblIN COnpJKeHO C ONaCHOCTbIO BO3DeIeCTBnA 3JIeKTPnueCKORo TOHa.
n) He nCnoJb3yIte 3JIeKTpOHcTpymeHT B6JIN3N JERKOBOcPJIaMeHryUOxxCa MaTePnaIOB. NCKpbI MOrT Bbl3BaTb BOCPJIaMeHHeNe 3Tnx MaTePnaIOB.
p) He nCnoJb3yIte pa6OuNe HnHCTpyMeHTbl, KOToPbIe Tpe6yIOT HCNoJIb30BaHnI OXlaHaIOUeHnDHOCTN. IcNoJIb3OBaHne BOdBi INIINHO XOJaHdaIOUeHnDIOCTM MoKeT PnIBeCTN K IopaKeHHIO 3JeKTPnueeCKHM TOKOM.

4.2 OToJaHa n COOTBeTCTByIOuIe yHa3aHnA no TexHNKe 6e3oNaCHOCTn

OTdaa npedctabIeT c60B BHe3aHHyo peakuB pe3yIbTaTe 3aueJIeHnI nn 3aKlnHBaHnBpaauOJeRO pa6Oye O HcTpymEHTA, HApnpMep, a6pa3NBHO rKpyra, IINΦOBaIbHO TaPeJHK, KAPDOUeTK N T. D. 3aueJIeHne nn 3aKlnHBaHnBe BeET K BHe3aHNO OCTaHOBKe BpaauOJeRO pa6Oye O HcTpymEHTA. N3-3a npOTnbONIOJHO HAnpaBLeHn BpaSeHnPa6OeO IHCTpymEHTA MeCTe 6LOKINPOBKN IpONCXODNT HeKOHTPOIpuyEmoe DBNKeHne 3JIeKTPoINHcTpymEHTA.

EcIn, HAnpHmep, a6pa3nBHyI Kpyr cenIaTeTcR nIN 3aeJaET B 3aROTOBKe, KpOMKa Kpyra 3acTpeBaet, IN B pe3yIbTaTe 3TOrO Kpyr MoKeT o6lOMnTbcra IN N Bbl3BaTb OTdauy. BcJeCDTBne 3TOro a6pa3nBHyI Kpyr DnHexTcRA Ha onepaTopa INN B PnOTHBONIOJHOM HApRaBLeHN, B 3aBNCIMOCTH OT HnPaBLeHna BpaUeHnRA Kpyra B MeCTe 3aklnHbAHnRA. Ppi 3tOM a6pa3nBHyI Kpyr MoKeT pa3lOMnTbcra.

OTdauaYBnareTcCneCTBnEMHe npabNbHOHn HeymenO 3KcNpyaTaunn 3JeKTPoHnHCTpyMeHTa. Ee moHHo N36eKaTb pni co6IIODeHNn OINcaHHbIX HnKe Mep npeoctopOHocTN.

a) Hpenko depknte 3JeKtpOnHcTpyment B pykax n 3aHmnte TaHyIO No3nIIO, YTO6bl Bbl MORnn npOTNbOdeiCTBOBaTb CnIe OTdaH. PnHaJIuN BCerDa NcNoJb3yIte DOONHtEnbHyO pyKoRTy, YTO6bl MaHCmMaJIbHO KOHTPOJInpOBaTb CNly OTdaH. IN PeAKTHBbIIM MOMENT pRn 3aNycHe. PpN CO6JIHODeHm MEp IpeDOCTOpOXHOCTN Bbl CMOXHeTe ynpabJIaTb OTdauEIN PeaHTNBbIMN CnJIaMn.
6) HnHOrda He DepeKHe pyKy B6Jln3n BpaaUoXxCpa6OuNx HHCTpyMeHTOB. PpN OTDaue BO3MOKeH KOHTaKT pa6OeRo INHCTpyMeHTa C pyKoI.

B) He cToIte Ha npTH BO3MOHHOI OTdauN 3JIeKTPoINHCTpyMeHTa. HanpaBJIeHne DBNKeHnA 3JIeKTPoINHCTpyMeHTa npN OTdauYe IPOTNBOJIOJIOHH ODBNKeHnO a6pa3NBHO Kpyra B MeCTe 3aKJIiHNBaHnI.
r) Oc06eHNO octopOHHO pa6oTaIe B o6laCTn yTIOB, OCTpbIX KpOMOH N T. N. He donyckaIte OTChAHBaHHN HIN 3aHInHHBaHHN pa6OuHX HHCTpyMeHTOB B 3aROTobKe. BpaUaIoUsnCra pa6OuH INCTpyMeHT CkIoHeN K 3aKInHHBaHHIO npi pa6Ote B 0bIaCTn yTIOB, OCTpbIX KpOMOK NII npi OTChAKHBAHHN. 3TO BB13bIBaET NOTePIO KOHTPOJI NII OTDaCy.
d) He nCnoJb3yIte cenHoi nn 3y6aTbi nnBbHbIN dNCH. Ndo6HbIe pa6OHy e HnCTpyMeHTbI YaCTO Bbl3bIAOT OTaCy nn NOTepIO KOHTpOHaD 3JeKTPoHNCTpyMeHTOM.

4.3 Oc06bIe yka3aHnI NO TexHnHe 6e3OanachOCTn npu wlnΦOBaHn N a6pa3HBHO pe3He:

a) NcnoIb3yIte TOLbKO NOxOJaIIN DnBaWero 3JeHTpOHNCTpyMeHtA 6pa3HBiINHCTpyMeHr INpeHa3HaueHHbI INr Hero 3aunTHbI KOJHyX. A6pa3NBbIE INHCTpyMeHTbl, He npedHa3HaueHHbIe Dnla DaHHoro 3JeKTPoIHNCTpyMeHtA, He 3KpaHnpYIOTCB IDOCTaTOHOr CTeNEHn IN He YBIAOTcR 6e3OpacHbIMn.
6) Bbinyhblie a6pa3NBblte KpyrdoJHhbI 6bItb pa3MeueHbTaHIM o6pa3OM, yTO6bl Hx pa6oay noBepxHocTb HaxOuHlacb HnHe KpOMKn 3aunTHoro KOHyxa. HenpaBnIbHo pa3MeueHHbI a6pa3NBbl Kpyr, BbICTyauOuNn 3a KpOMky 3aunTHoro KOHyxa, He MoKet 6bItb 3kpaHnpOBaH DoJXHbIM o6pa3OM.
B) 3aunTHbI KOxH DoJIHeN 6bITb HaJeHHO 3aKpeJIeH Ha 3JeKTPoHnHCTpymEHTe N B CeJAX MaHCmMaHbHO 6e3OnacHOCTu OTpeYlnPOBaH TaHIM O6pa3OM, YTO6bl OTKpbIToH OCTaBaIacb IINb CaMaJ MaJaA qACTb a6pa3HBHO HnCTpymEHTa. 3aunTHbI KOxH ClyKHT DnA 3aUnTbI OpeaTopaOT OCKoIKOB H CnyauHOrO COpnKcOHeHnC a6pa3NBbIM HnCTpymEHTom, a TaKHe OT NcKp, OT KOTOpbIX MoKeT BOCnlaMeHnTbcra OdeKaDa.
r) A6pa3NBbIe HNCTpyMeHbI DOJIHHbI
HCNoJIb3OBaTbC8 CTpOro NO Ha3HaueHbIO.
HanpIMep: HNKOrDa He npOBoIte
UHnΦOBaHne 60HOBn IOBepXHOCTbIO
OTpe3HOrO Kpyra. OTpe3HbIe KpyrN
PpeDHa3NaYeHbI DnA CHrTHMaTePnaJa KaPOMKoH
Kpyra. BOKOBoe CINlOBoe BO3dEiCTBNe Ha
OTpe3HOJ Kpyr MoKeT pa3pyWHTb erO.
Д)Всердансплььзугелсправны Здимовфаланeц,ERO pa3мериФорma ДОЛЖнbl COOTBETCTBOBaTb Bbl6paHHomy a6pa3NBHomy Kpyr.Похдяше Фланцы претают сбов onopy ДЯ abpa3HBHORO Круги Tem CambIM CHINHAOT ONaCHOCTb eRO pa3lOMa.Фланцы ДЯ OTpe3HBIX Кру罗MOrTy OTлчатьсг OT Фланцeв ДЯpyгИx abpa3HBHbIX Кру罗.
e) He nCnoJb3yIte H3HOweHHbIe a6pa3NBbIe KpyrN OT 3JIeKTPoHnCTpyMeHTOB 6OJIbWeero

pa3mepa.6bpa3HBHbIe KpyrI dI
3JIeKTPoINHCTpyMeHTOB 60JIbIWeIro pa3Mepa He
pacCHTuHbI Ha NOBbIWeHHyU Yo AcTOTy BpaJeHN
3JIeKTPoINHCTpyMeHTOB MeHbIWeIro pa3Mepa I
MOry Pa3JOMITbcI.

4.4 DoonHnTeJbHbIe OcO6bIe yKa3aHnI NO TexHNHe 6e3OpacHOCTn npa6pa3HBHO pe3Ke:

a) N36eraIte 3aKJIHHBAHnO OTPe3HOro Kpyra IIN CInuHOM 60JbUoro DaBJeHnI npHXnMa. He BbINOJHnTe CInuHOM rIy6OHe pa3pe3bl. Ipeperpy3ka OTpe3HOrO Kpyra pNBOdIT K erO nepeHaPRAKeHNIO npekeOCam IIN 3aKJIHHBaHIO, YTO yBEJIuHBAET BepoTHOCTb OTdaUY INI NOLOMKn a6pa3NBHOr MaTepnaJa.
6) He cToIe B 30He nepeB bpaauoummcr OTpe3HbIM Kpyrom n 3a Hm. EcIn Bbl HaHyHeTe DBnraTb OTpe3HOJ Kpyr C 3aROTOBKOJ OT Ce68, TO B Clyuae OTdaun 3JIeHTpOHCTpyMeHT C BpaauoUMCk Kpyrom 6yDeT OTbpoWeH npRMO Ha Bac.
B) B clyuae 3aHnma OTpe3Horo Kpyra Hn npn nepepbBe B pa6ote OTHIOUHTe HNCTpymeHT nnoepHNte erO B pyHe Do NOHOn OCTaHOBN BpaauoJeroCg Kpyra. HnkOrda He NbTaIaTeCb N3BLey DBNHuyuNCr OTpe3HOH Kpyr H3 npONla, TaK KaH 3TO MOKeT Bbl3BaTb OTdauy. OnpeDeJIte n ycTaHnTe npuHy 3aKlnHHaHnY.
r) He BkIIOuAte 3JIeKTHPOINHCTpyMeHT, ecn OH HaxoNTcB 3aROTOBHe. Chauana daIte OTpe3HOMy Kpyry Ha6paTb NOHyU qAcTOTy BpaueHH, TOLbKO NocLe 3TOrO OCTOpOHNO npodolJaHte pe3ky. B npOTHBOM clyuae Kpyr MOKeT 3aeCTb, OTCKOHTb IN3 3aROTOBKn IINI Bbl3BaTb OTdauy.
A)ДЯ CHINHENNA PNCa OTdauN B pe3yIbTaTe 3aKInHHBaHHa OTpe3HOrO Kpyra npn 06pa6oTHe NHT H 3aROTOBOK 6oJbWoro pa3Mepa NOBeHTE NOH Nx ONopy. 3aROTOBka 6oJbWoro pa3Mepa MoryT nporHytbcr NOd DeiCTBHeM CO6CTBHeHORo BEca. Iod 3aROTOBHy CLEdyET NOdBecTHn ONOpblc DByX CTOpOH, a IMeHNo B6JIu3n pe3a N KpOMKn.
e)Будьт oc06eHNO octopoHHbI npn Bblpe3aHn HnB NmEIOuNXc CTehax nI IN dpyrnx He npocMaTpnaEBmx 3OHAx. Iorpykaembl OTe3HOJ Kpyr MOKeT Bbl3BaTb OTdauy npn pa3pe3aHn r3o- N BOOnpOBoOB 3JIeKTPnuEcNx PPOBOOB nIN hNbIX o6beKTOB.

4.5 Oco6bIe yHa3aHHn IO TexHnKe 6e3OpacHOCTn npu IINΦOBAHn HAnDaHOn 6yMaRo:

a) He nCnoJb3yIte ⅢnΦOBaIbHbIe JNCTbl CnshOM 6OJbUoro pa3Mepa, co6JIoJaIte yKa3aHHbIe npOn3BODHTeJIem pa3Mepbl.

IINΦOBaJIbHbIe JInCTbI, BbICTyNaIOUcne 3a KpaI INΦOBaJIbHbIX TapeJIOK, MOrYT CTaTB npuHON TpaBM, pa3OpBaTbcR, a TaKHe npNBecTu K 3aKlnHBaHHIO NnK OTdAue.

4.6 ToIbHO IaWEV 15-125 Quick HT, WEV 17-125 Quick Inox, WEV 17-125 Quick Inox

PYCCHNru

RT: Oco6bIe yka3aHnNo TExHHne 6e30nacHOCTn npn noHnpOBaHN: PpocJeNTe, YTO6bI He CBncaHn qactn NOIpOBaJIbHOro KOJIpaKa, OCO6eHNO erO WHyprN dJa KpeJIeHn. Y6epnte B CTOpOHy IIN o6peKbTe WHyprN. CBncaUoJne n BpaZauOuIeScr npn paBoTe KOHcBi UHypKOB MOryT HaMOTaTbcraHa NaIbCuI NII 3aROTOBky.

4.7 Oc06bIe yka3aHnI NO TexHHHe 6e3onacHOCTn npn o6pa6oTHe KapdoUeTHAm:

a)ПOMHHTe O TOM,чTOи3 Kapdoошten BbInadaOT KycOuKN npOBOLOKn Даже пу N obiyHOn 3xCnIyatauHN. He neperpyJaTe npOBOLOKy CINXKOM BBICOHN DAblEnHem npHHMa. OTJIeTAIOUne KycOuKN npOBOLOKN MOrY TJIeKTo PpOHNIKHHyTb ChBO3b TOHkyO OdeJdy N/IIIN KOHy.
6) EcIn peHOMeHDoBaHO npImeHHe 3aunTHoro KOHyxa, He donyckaIte COnpNKoCHOBeHHKoHyxa H KapdoUeTHN.

DnameTpapeJIbYaTbIX NuaIeUHbIX UeTOK MoKeT yBeJIuNBA TbCB NOB BO3DeIcTBHeM DaBJIeHnnpHHMa n ceHTPo6eHHbIX CnI.

4.8 DoonHHTeIbHbIe yHa3aHnI NO TexHnKe Ge3OnaCHOCTN:

PNEyPENHEHNE!Bcerda Hocnte 3aunTHbIe OCHN.

PNEyPENKDEHNE. JepKeTe 3JIeKTponHcTpymEt BcERda DByMa pyKaMn.

Pn Heo6xOdMocTn HcNoJIb3yIe 3JIaCTNHyBIE npokladkn,ecNI OHI NOCTaBJIOTc BMeCTe C INHCTpyMeHTOM.

Co6IIOdaIte yka3aHnI npOu3BOUITeJIe paOchN IHCTpyMeHTOB nI npHaJdJeKHOcTeI! BepeRITe KpyrN OT ydaPob N KOHTaKTa C JnpaMn I cMa3KaMn!

BepeKHO xpaHnTe n npMHeNrTe a6pa3HBbIe KpyrN B COOTBeTCTBnC ppeDnCaHnMn PpOn3BOdntela.

HnKOrda He nCnoB3yIe OTpE3HbIe KpyrI dJIa YepHOBO rO uNΦOBaHrI! OTpE3HbIe KpyrI HeJIb3r IoDBepratb 60KOBOMy daBHeHIO.

3arotobky HxHNO npOHO 3aKpeNtBn 3aΦHKcnpoBaTb OT cDnRa,HaNPmEp, C NOMOuIIO 3aKHMhIx nPncOcOBeHn. Kpynhie 3arotOBKn DOJIHHb IMeTb DOCTaTOHyO ONOpY.

Pn HcNoJIb3OBAHn pa6OuHX IHCTpyMeHTOB C pe3b60B0B BCTaBKOJ KOHeU WIIINHDeJI He DOJIKeH KacaTbC8 OCHOBAHNA OTBepCTNIAI HINCHTPyMeHTa.CJeIte 3a TEM, YTO6bl pe3b6a pa6OeRo IHCTpyMeHTa IMeJa DOCTaTOUYIO DLIHy DIA WIIINHDeJI. Pe3b6a pa6OeRo IHCTpyMeHTa DOJIHHa COBnaDaTb C pe3b60I WIIINHDeJI. DIInHa N pe3b6a WIIINHDeJI npIBeDEHbI Ha c.4-5 IN B rIabe 14. TexNHueckne XapaKTEpNCTNIH.

PekomeHdyeTcNcNoB3OBAbCTaCnHOApHyU yctahOBky dny ydaJIeHnIbII. Ipeed

HNCTPymENTOM Bcerda NOKluoyaTe aBTOMAT 3aunTbI OT ToKa yTeuKn (y3O) c MaHC. TOKOM OTKluoyehn 30 MA. B clyuae OTKluoyehn yTLOBOI WlnfMaunHbI aBtOMa T3aunTbI OT ToKa yTeuKn HNCTpymENT CJeDyET npOBepNTb N OunchTb.CM. rAbY 9.OncTka.

IpimHeHneIOBpeKdEHHbIX,DeΦOpMnpoBaHHbIX IIN Bn6pnpuyOuix INcTpyMeHTOB 3aIpeueHo.

He donyckaIte NOBpeKJeHn ra30- nIn BOIOnpoBOIOB, LINH NJIeKTPoNTaHnN Hecyuix CTen.

Ipepe npoBeHnem KaKx-Im6o HacTpoeK, IpeoeOHaueHnna nnpa60ntoTexobcnyKnBaHnIO n3BleKaInTe CteByu BnKy n3 pO3ETKn.

PpeOxpaHHTeJbHaMyfTa Metabo S-automatic. Pn cpa6aTbIBaHHn PpeOxpaHHTeJbHO MyfTbI He3aMeDINTeJbHO BbIKIOuayte HNCTpymEn!

IobpeKdHnHa HnNtpeckKaBwaJcR
DOnONHHTeJIbHa pyKOaTKa NODJeKHT 3aMeHe. He
HCNOJIb3yIte 3JIeKTPoINHCTpyMeH T C DeΦeKTHO
DONONHHTeJIbHOpyKOaTKoI.

NoBpeKDeHbI ININOTpeCKaBUnc3aUHTbI INOHyX NOJLeHNIT 3aMeHe. He nCnoJIb3yInTe INHCTpyMeHT C DeΦeKTHbIM 3aUHTbIM KOHXOM.

3aKpeIe He6oJIbUHe 3aROTOBKn, HApnMep, 3aHMaTe IN B TnCKax.

CHINHEHNE nbIeBOH Harpy3KN:

AuctncbI,obpa3yiouiece npn pa6oTe c DaHHbIM HNCTpyMeHTOM,MOrT COepeKHaTb BeuecTBa,KOTOpBIE CNOCO6CTBYOT pa3BHTHO paKa,POBLeHNO aJIePrnuecknx peakni, 3a6oJeBaHni DbIXaTeNbHbIX NyTei,BPOJDeHHbIX DeeEeTOB INpOuHX 3a6oJeBaHni PEPoDyKTNBHO CnCTeMbl.HeCKoJIbKO pnpMePoB NDo6hXBEueCTB:CBHeU (BCoepKaUeM CBHeU JIKI),MInHepaJIbNaI NbIb (IN3 CTPONTeHBOHO KInPnHu,6eToHa I.T.I)DO6aBKn DIAOBa60fKN dpeBeCnHbI (COIb XPOMOBOKNCLOTb,CpeDCTBA Dnla3aunTbI dpeBeCnHbI), HEKOTOpBle BNDbl dpeBeCnHbI (HaNPmEp,blb OT dyBa nII Byka),MeTaJIbI,ac6ecT.

BelenuHa pncKa 3abnCt OT npoJokHnteHocTn BO3deIcTBnA 3TNX BeueCTb Ha nolb3OBaTeJI HnHaxOJaXxCra B6n3N IIOJe. He onyckaIte nonadHna qactnO o6paBaIBaemOrMaTePnAJaB OprAHN3M.

IyMeHbWeHHBpeHNO BO3DeNCTBn 3TNX BeueCTB:ObecneYte XopoWyIO BEHTNIAuIO pa6oeryo MeCTa HocHTe NOxOJaUne CpeCDTba 3aunbl, HanpImep, pecnnpaTOpbI, KOToPbIE CNOC6HbI OTHbTpOBbIBaTB MHKPOCKONHeckNe Yaactnbl.

Co6IIOdaIte DnpeKTHBbl, pacnpocTpaHryUOuiecA Ha o6pa6aTbIbAembI MaTePnaI, nepcoHaI, BapnAHT npIMeHEnH I MeCTO npOBeDeHnPa6OT (HaNPmep, nIoJxHHeNc 6 oxpae Tpyda, yTuIN3aun).

Obecneyte ydaIeHne o6pa3yUOxxCraactu, He DonyckaTe o6pa3OBAHnO TIOXHeN B OKpyKaIOUeM npocTpaHCTBe.

Y)ДЯТOLCTbIX a6pa3HBHbIX KpyroB:

6yPTHKraHKCDByMTopeBbIMNOTBepCTnMR (13) 6bpaueH BnH3 JIA NaHeKHOI KCaUN raHKHa WnHDeJe.

Z) ToIbKo IJIa W 9-100:

6yptnK raHcN C DByM TOpueBbIMN OTBepCTnMaN
obpaueh BHN3, a POBHAR NOBepxHOCTb raHKn Habepx.

• 3aФнСиPyIe 7HdJIb. 3aTAHnTe rAky C DByMTopueBbIMN OTBepCTnAMy (13) c NOMOuIO DByXHTnΦTOBOr KJIoua (14) no Yacoboi CTpeJIke.

OTBnHcNbAHne raKn C DByMg TOPeEBIMN OTBepCTnA M:

-3aΦnKcHpyIe IINHdJIb (CM. rIaBy 7.1). OTBnHTIte raIky C DByMRA TOpCEBbIMN OTBepCTnIaMn (13) C NOMOuBIO DByXWTnΦTOBOrO KJIoua (14) npOTnB YacOBo CTpeJIHn.

8.Зкплуataцnia

8.1 Perylnpobka yactotbI BpaueHnB (3abncmoCTN OT KOMJIeKtaun)

Ha yctaHOBOyHOM KOleCnKe (8) yCTaHOBnte peKoMeHDoBaHHyU YoACTOTy BpaueHn. (He60JIbIoo YnCNo = Hn3Ka YactOTa BpaueHn; 60JIbIoo YnCNo = BbICOKa YactOTa BpaueHn)

OTpe3HbIe Kpyu, KpyrДЯ YepHOBOrO
UINΦOBAHNIA, UINΦOBaJIbHbIe YaWKn, aIma3HbIE
OTpe3HbIe Kpyr: BbICOKa YactOTA BpaueHnA
UETka: CpeHra Yactota BpaueHnA
UINΦOBaJIbHaNar TapeJkA: OT Hn3KoNdo
CpeHne YactOTbl BpaueHnA

Yka3aHHe: nI npOBeHnI NOInpOBaJIbHbIX pa6OTMbIpeKOMeHdyEm yrIOByIO NOInpOBaJIbHyIO MaunHy.

8.2 BkIIOueHHe/BbIKIOueHHe

HCTpyMeHT Heo6xOaMo BcerIa DepeKaTb oBeIMn pyKaMn.
I OOBODHTe HCTpymeH K 3aROTOBHe TOJbKO BO BKJIHOeHHOM COCTOAHIN.
He donyckaTe HnpeHaMepeHHoro 3anycka: Bcerda BBkIIOuAte INHCTpyMeHT, ecnBnka 6bila n3BLeueHa n3 po3eTKn nnecnn npon3oWeJ c60B B noDAye 3JeKTPo3Heprnn.
BpeKHe HnpepbIBHOJ 3KcNlyaTaUHnHCTpyMeHT npoDoJIkaeT pa6OtaTb,JaKeecn OH BbIPBeTcN3 pyKn. NToTOMy BcerdaKpEnKO depKHTe HnCTpyMeHT DByM pyKaMn 3apyKoAaTH, 3aIMnTe yCTOuHBOE NOLOKeHne INoHocTbIO cKOHueHTpnpyITecb BBINOJIHaREMpa6Ote.
He donyckaTe 3aBnXpeHnI INBcacbBaHnIHCTpyMeHTOM nbIIN CtpyKn. He KlaIndTe 3JeKTPoHnCTpyMeHT Do NOHOr OCTaHOBKn DBNrTaTeJI.

HctpymeHTbI c nepeKIOuateJeM:

BnHueHne: cBnHbTe nepeKlIOyateIb (5) BnpeI. Ira HnpepbBHO pa60tI HaKMITE nepeKJIIOyateIb BHN3 Do KCaun.

BbIKIOUeHHe:HaKMnTe Ha 3aHnKoHeu, nepeKlIOuAteJe (5), a 3aTeM OTnycTHTe erO.

HnctpymEnTbI C IeNecTHOBbIM nepeKIOUOaTeJeM (c yHNKeNe 6e3OnacHOCTN):

BkIoueHne: nepeBnHbTe 6IoKnpaTOp BkIoueHnra (10) Byka3aHHOM CTpeJIHO HAnpaBLeHn n HaKMnTe HaKMnHOI nepeKlOuataJIb (9).

BbIKIOUeHHe:OTNcyCTHTeHaKHMHOI nepeKIOuAtelb(9).

HnctpymEnbI c 6o03HaueHHeM W...RT: KpaTHOBpeMeHHoe BkJIIOUeHne (cФyHKnueN abTOCTOna)

BkIoueHne: nepeBnHbTe BnpePeHaJHMHO npeKIOUaTeIb (9), 3aTeM HaJHMHO HAKMTe BBepx nepeKIOUaTeIb (9).

OTKJIIOUeHHe:OTNcTHTe HaKIMHOI nepeKJIIOuHaTeIb (9).

Hnctpymehtbc 6o03haeHHem W...RT: HenpepbBbI peKIM pa6Otbl (3aBNCMOCTN OT KOMJIeHTaun)

BkIIOUeHHe: BkIOUHTe HNCTpymeHT, KaK OINcAHO Bblse. HaKIMHOJ nepeKIIIOuTaJIb (9) nepeDBnHbTe BnpeEd eue Ha ONDy N03NUHIO I OTNcyTITe B 3TOM NIOLOKeHN, YTO6bl 3aΦNKcnpoBaTb HaKIMHOJ nepeKIIIOuTaJIb (9) (HeNPepbIBHbI peKIM pa6Otbl).

OTHJIIOUeHHe:HaKIMHOIpeKeIIOuTeJIb(9) HaKMITE BBepx I OTNcyTHTe.

8.3 Pa6oynye yka3aHnna

CTaHdapTHoe ⅢJnΦOBaHne n ⅢJnΦOBaHne HaKdaUHO6ymarOi:

PnKMaTe HNCTpyMeHCTyMEpeHHbIM yCNIHEM nIepemaeaHTe ero no NOBepxHOCTn B3aN I BnepeiTO6bl NOBepxHOCTb 3arOTOBKn He neperpeBaJacb.

YepHOBoe WJINΦOBaHHe:ДЛЯ NOJUyeHnXopoIeRo pe3yIbTaTapa6oTaIteCycTaHOBOuHbIM yrIOM 30^ - 40^

A6pa3NBHOe OTe3aHHe:

Pn a6pa3NBOM OTpe3aHnB CcERda pa6oTaIe BO BCTpeHOM HappaBHeHH (CM. pucyHok). NHaue HHCTpyMeHT MOKeT HeOHNDaHHO BBICKoHTb n3 npOnnla.Pa6oTaIe C

yMepeHHoI NOaYe, COOTBeTCTByIOUeI O6paBaIBaEMOMy MaTePnAly. He DonyckaIte NepeKocA, He HaHIMaITe I He paKaunBaIte IHCTpymEHT.

06pa6oTka hapdouTehamn:

ymepeHHo npnKmMaIte HNCTpyMeHT.

8.4 Nobopot Kopnyca peyktopa

CM.pncyHOKDHa c.3.

-ИЗВЛЕКИТЕ сеТЕВУЮ ВИЛКУ.
- BbIKpyTnTE KpeIeKHHbI BnHT (a) pbIyara (15). YdaJIITe BNHT, CHIMITE pbIyar (BMeCTe C JINCTOBbIM 3JIEMEHTOM) N OTIOJHNTe B CTOpOHy.
- BbIKpyTnTe 4 BnHTa KOpnyca peDyKTopa (b). BHIMAHNE! He chHmaiTe KOpnyc peDyKTopa!
- NObepHnTe KOpnypeDyKTopa B HyXHoe NOJIOKeHHe, He CHImaERo.
-BkpyTnte 4 BnHTa KOpnyca peDyKTopa (b) B NMeOuNeecr pe3b6bl! MomeHr 3aTJHKN = 3,0 Hm +/-0,3HM.
- CmecHTe B cTOpOHy npyKHy, KOtOpa npnKImaeT pbIurB HUxHOM NOLOKeHHN, IN CHOBA yCTaHOBInTe pbIur (15) (BMeCTe C IINCTOBbIM 3JIeMeHTOM), 3aTAYHB KpeNeXHbIM BNHTOM (a). Moment 3aTAAKN = 5,0HM +/- 0,5 HM. PpOBepbTe pa6OTocNOc6HOCTB pbIurA: OH DOJKeH 6bITb NOD BO3DeHCTBHeM CNJIbl npyKHHbl.

9. OuInCTHa

Ipn pa6Ote BO3MOxHcKoJIeHne yAcTHU,
06pa6aTbIBaEMoMaTePnAJa BHyTpN
3JeKTPoHnHCTpyMeHTa. 3To yXyDwaET
OXlaJxHeHne 3JeKTPoHnHCTpyMeHTa.
TokopOBoDAuHne cKoJIeHnM OryT HApUHTb
3aunTHyIO nOJLauHIO 3JeKTPoHnHCTpyMeHTa, YTO
COnpJKeHHo C OnaCHOCTaM NBO3dEYCTBn TOHa.

Yepe3 He60JIbUHe paBHeIe npOMeKHTn BpEmHn TuaTeIbHO ydaJrTe 3aqr3HeHn H3 nepeDnX H 3aDHnx BeHTnlaOHHbIX 7eJe 3JIeKTPOHNCTpyMeHTa HIN pOdyBaIte Hx CyXm BO3dYxOM. Pepe3TtM OTCoEHNHTe 3JIeKTPOHNCTpyMeHT OT NCTOCHNka NITaHn I HocHTe PnI 3TOM 3aunTHbIe OcKN I pecnnpaTop.

10. YctpaHHe HeNCnPaBHOcteI

HCTpyMeHTbIC 3JIeKtpoHnKoY VTC n TC:

3NeKtpoHHbI CNrHaJIbHbI INHdNHaTOp (7) 3aropaetc, n yactota BpaueHn noi Harpy3kOyMeHbwaetc (He W...RT).

CnHkOM BbICOKa Harpy3Ka Ha IHCTpyMeHT! DaTe npa6oTaB hNCTpyMeHTy Ha XOIOCTOM XOy, NOKa 3JIeKTPoHHbI CNHaJIbHbI INHdIKaTOP He norachET.

3JIeHTpOHHCTpyMeHT He pa6OtaeT. 3JIeHTpoHHbI CNrHaJIbHbI INHdNHaTOP (7) (B 3aBnCHMocTH OT KOMnJIeKTaun)

Mnraet. Cpa6oTana 3aunTa OT NOBTOPO 3anycka.Ecn npn BkIIOeHOM INHCTpymEnte CeTeBa BNlka BCTaBnETCB PO3ETK,INN NOCNE c6oB BOCCTaHOBHe NaOdaa 3JeKTPoNTaHH, INHCTpymENT He 3anycKaeTc.BbIKIOuHTe n Choba BHIOUHTe INHCTpymENT.

11.Принодлжностn

IcnoJb3yInTe TObKo OpiHnHaJIbHbIe npHaJaJIeXHoCTN Metabo.Cm.c.6.

IcnoJb3yIe ToJIbKO Te npHaJdJeKHOCTN, KOTOpBIE OTBeuAOT Tpe6OBAHnM n NapaMeTpam, nepeuCJIeHHbIM B DaHHOM pyKOBOdCTBE NO 3KcNlyaTaun.

A 3aHIM 3aUHTHOKOHyXdIaOTpe3HOKpyra/3aUHTbI KOHyX dIa6pa3NBHOpe3HN

PpeHa3HaueH paoBtIC OTe3HbIMN Kpyramn, aIma3HbIMN OTe3HbIMN Kpyramn. Pnp YcTaHOBJIeHHOM 3aKHMe 3aUHTHOro KOxHyxa dIy OTpe3HOrO Kpyra INCHTpymeHT MOXHO NcNoJb3OBaTb DIA abpa3NBHOJ pe3KN.

B 3aunThbI KOHX dIy a6pa3NBHO pe3H

PpeHa3Hauhen Dnpe3Kn KameHHbIX NnIT aIma3HbIMN OTepe3HbIMN Kpyramn. C natpy6kom dIydaJIeHnKameHHoN PbIJN C NOMOIO COOTBeTCTByUoJero PbIeYdAJaHOJooJero annapata.

C 3aunTHbI KHXyxC BbITAHHOJ nIPOCHORO UINHOFOBAHNA

PpeHa3NaueH dIa IINIOBOAHN6BeToHa,CTJHKn, DpeBecnbl IN NOLIMePOBaJIMa3HbIMNuAWeuHbIMN Kpyramn nn PboBbIMN Kpyramn n NOxOJaUMN IINIOBOAbhblIMN TaPeJHKamn. C NaTpy6KOM dIy BItjKKn KaMeHHoN, DpeBecHO N NOLIMePHO NBILN C NOMUBo COOTBeTCTByIOUcero nbIJeYdaIauOcero aannapaTa. He NOxOaNT dIa BBITJAKKn NCKp nn dIa WInIOBAHNA MeTAnla.

D PtoTHBOBnblneBOHΦNlIbTp

MeIknOyueHcTbI ΦnIbTp npedeoTbpaaeta TnonadaHHe KpynHbIX YactN B Kopnyc DBrIraTeJIa. PeryIrpHo ChnMaIte N OunuAite FnIbTp.

E 3aunTHna cko6a

PpeHa3NaheHaIpa6oTcOnopHOnTapeJIko, WlnΦOBaIbHOJ TapeJIko,KapdoUeTKamn anMa3HbIMN KOJIbcEeBbIMNCBepIaMn IraIINrK.

3aunTHa nO6a Iy yCTaHOBKn IOI, 6OKOBYIO DOnoHNHeBHyIO pyKoTky.

FMHOrOno3nUHOHHa ChO6a IJN DOnOHHTeBHOpyKoATHN

06ecneuBaet pa3nHbIe noLoKeHHy pyKoTKn.

G CbemHaJdoNoJIHHTeJIbHaJ pyKoTHa co cko6oJ

Полны accopTmEHT npHaJdIeKHOCTe CM. HacaiTe www.metabo.com ИИВ KaTAlore.

12. PemoHT

KpeMOHTy 3JIeKTPoHnHCTpyMeHTa DONYCKAOTC TOnbKO KBaJIuΦNcIpuOBaHHbIe CneuaJIncTbI-3JIeKTPnK!

PnIOBpeKdEHH COeHNHTeHbI NpOBOD, POnJIeXHT 3aMeHe CneuaJIbHbIM NpOBODOM.

LpA = ypoBHeB 3ByKOBOrO daBJIeHnIa

LwA ypoBHeH 3ByKOBOH MOUHCOTN KpA, KwA KOaΦnueHT norpeuHOCTH

Bo BpemraaboTbI ypoBeHb Wyma MoXeT npBbIwTaB 80 d5(A).

HaedeBaIte 3aunTHbIe HayuHnKn!

EAC

HΦopmaζηДЯ nokynatela:

CepTnФнKaT COOTBeTCTBnA Nc EA3C RU C-DE.Γ509.B.00161/20, cpoK DeiCTBnA C 19.03.2020 no 18.03.2025 r., BbIaH opraHOM nO ceTpNФнKaUIn npOdyuKun O6uecTBO C orpaHueHHoN OTBeTCTBeHHocTbIO "He3aBncmam 3KcpeTpHa; MecTo haxOJdEHNr (aDpec kOpduNeCKOrO liua) n aDpec Mecta OcyuEcTBJIeHn DEJeTeJIbHOCTn: 115280, PocCn, ropoM MoChBa, yInuca JLeHHcKaJ CNo6Oda, dom 19, 3TaXk 2, KomHaTbI 21w8, 21w9, 21w10, 21w11; TeleΦoH: [phone]; AApcec 3JIeKTPOHHoN NOuTbI: [e-mail]; ATTecta

aKpeiTaun No POCC RU.0001.11F609 ot 09.09.2014 r.

ДeКлараця O COOTBETCTBn (RoHS): № EA3C N RUД-DE.ΓБ09.B.00361/20,spOK DeIcTBnA C 06.03.2020 no 26.02.2025 r.,ЗaperиctprpoBaHa opraHOM nO cepTnФнкaци npodyKuNs OSeCTBO COrpaHnueHHoN OTBETCTBEHHOCTbIO "He3aBnCmMaJ 3KcpeTpN3a";MeCTo HaxOJdeHnA (adpec IopnduYeCKoro LInca) n aDpec MeCTa ocUseCTBLeHnJaTeTebHoCTn:115280,PocSry, ropord MocRbya,yInua JelenHcka CIo6Oda,dom 19,3tAnk 2,KOMHaTbI 21W8,21W9,21W10,21W11; TelefoH:[phone];Adpec

3JIeKToHNoI NoTbI:[e-mail];ATTeCTaT aKKpeiNauN NpOCC RU.0001.11Γ609 ot 09.09.2014 r.

CtpaHa n3roTOBNeHn: TepMaHnIa

ПОНЗВОДИТЕЛБ: "Metabowerke GmbH", Metaboallee 1, D-72622 Nuertingen, Германя Имно对接 в Росси:

OOO "MeTa6o EBa3n"

Poccn,127273,MochBa

yI. BepezOBa aIJIe, I 5 a, cTp 7, oΦnc 106 TeI.: [phone]

IaTa IpoIN3BOIDCTBa yKa3aHa Ha IHΦOpMaQUHOHHoT Ta6JIuHKe INHCTpyMeHTa B φOpMaTe MM/rrr

Cpok cnyk6bl n3delencoCTabIeT 7 let. HpeKoMeHdyETcK 3KcnLyaTaUIN NO nCTeueHN 5 let XpaHeHH C DaTbI N3rOToBJIeHH 6e3 npedBaPHTelbHO npOBepKn

Oqnuqnpduuulqpflulufnngnyg

1. zuuuunuubuuginpiuuhuwwuqhp

Uunlhuunupnulkugunhl
uunnuuulwunulnpjudp, np uju wulnlhuihhi hlnnn
uwphpp, jnpufwchynih [hp uwnl] utpwhuuhwupn]
gumulwugwglw *1), hwwuwwuulwunuufu tghpuhwqgtph
*2) luapulph *3) gnnpduuuaqunulqupnlpilph:
Slvghluulwchununupplph huiup *4)-nlu 4:

2. 4pumnuf pfunquunfip

Uglmghh hlnnunnnn Metabo opqihlm hnmlnn
whph h ufulunupgph hbn cuhwqnudu wupuqunud
fwhunbunbs hnhun, hnpqpnd fuwwppduf
qwnucunug, stwnunwlf nquwnfgtpm dcaunng
ucwnumGfGtph hwnp, HsuTu gnwnuug sph lhpnnm
stununh, pannh, fuph h gwnunnug Gynptph npnnu
ucwnunGfGtph hnup:

WEV 15-125 Quick HT, WEV 17-125 Quick Inoxp, WEV 17-125 Quick Inox RT-gnugghgfunmukunu
h qunlbgufp hph uununufih huunp: qunlbguf
pupn uununufp nplpupudwn oqunnpdu
hmnp npn ngf unnnn mghn gnnn
umpf:

WEV..uuluiuucudup uupflppuunnnjglph wpuqnlpnip
lwnqunpnu nghuunfumnllhpwnntb6 uunmufnpnunut
uknnnunqhng hnquunlglpnnncmhugm mcnnnnm6f6pnn:
UJI qununulgl.pnl uulupuonqanodu unpnuuufn
uuwuyugud qunulph hudup quunuuluvunnlnpqnlp npnld
Pmgmmntn oqnneqn:

nupnnu np hnlhl1 lhg pfhpjugil n muf nuqnpju gngnuflpfnl kwnuplnpuun uunuhwpfip huufu u nlpjup qwupq1h pnhuwupd yngwnuflpp:

3. Uguunuqmpjug ughuimp gnuuufip

Qip uifumuqnpjuf h Qip qupohf h uupf hnlpjuf h uupwhnlpjuh huiup nwnpplpnjnf npapl f nngn jgnu uju fucunl fud huund uudgikphg:

99AbTu.3HU JnnuJud f unnuuun n quuip q uupquln, quukgfln huiup luupnugl f oquwnpduu nuIgnp:

94nhU.3Hf Yuppuugl.f uufilunufiqnnpjufpnnp Ionphnnpifkpi n gngnffilpp:

Ufwnuqnupgngnulbphghkunlhpwppn hwhqlgih kthnpwughwipwsh, hpntnh /pwn dwhp wpiuwlqufwuwefbph:

U.gufuqipjuppugn gumgufp m nkgm jguuhqmfki guh muququh hunup:

QpI,LTqunpuuq qnpohfL uwnugf uwnuupneph, mntgmyh hn uhu6:

nwnnpnnpnq npdpgl qnpdhgtph luupwpuqwhph
wpwnpnnghpgnimg6ph: Nucuqwhulunwnwhp
fupuug h pncng:

2nuiuuiunulitppwuhujutlloqwnqnolbhuufnl, uwnpnngnimgntphhunuwunuunu:

bppf zoquunqupdt hnpnn hnwlulmnnmlhgtp
hnqnwnucwud wcvwnuufghhp hwnup: 2h npxtl h npnp
hnwlulwumulgtpg pwphtl qnqjgh6cug:

Uunumunumunumufuunf uunmuugm h ummu unhmu ng uunumupufudh, ophuiu utanunutpoh qunpumip: Uk

P1 U,1m1m1w1h1g1m1 hq1pm1p1m

P2 = Spuun hqumpymf

m=Pm mnnfug ninfguf Lmp

Quihh h huaipnpuen EN 60745 nipf:

□ qnpohf mucunmuunpumu 1muh

ah,SG = Smmfimfipmpdf (Uhlpunfip hnqm)

ah,DS = SumunufinuifihmpdIf (2nulunuunuunl] h

ah,P =Smmmglgtpmptf (MjLtgml)

KhSG/DS/P Uglmymgpmg (mmmmnnffk) UnulA-umuhuuhduuupuuu.

LDA =U,lnunh1gucuufduuupul

LWA = Unulh h qnpnlpjuu duiu pnuul

K_pA, K_WA = S_mmm

Ucbununufpupugnfuiuunununhununununl qulpuquufgl 80nF (U):

nnpunu np ltpuucunuug uulugul

EAC

StnIqmuipm qinmu hunuip.

4.7 CbIM KblwaKaTapMeH XyMbic icTey Ke3iHderi Kayinci3ik TexHNkacbl 6oBbHwa apHaNbI HycKaynap:

a) CbIM Kblwak aedTteriDen naDanaHbIraH Ke3de De, OHbIH iwiHeh CbIM 6eJweKtepi Tycetih Ecepehi3. CbIMdapFa TBIM KOFapBi 6acy KbICbIMbl apKblbl apTbIK KYKTeme TycipMeHi. Ywna cbIM 6eJIweKtepi KyKa KNIM XHe/Hemec Tepi apKblbl Ohai Kipin Ketyi MymKiH.
e) KopraHbIi KaJnaKaTbI naJaIaHaHyFa KeHec 6epinCe, KopraHbIi KaJnaK neH cbIM KbIJwaKaTbIH KaHaCybHa JoI 6epMeHi3.

Tepenkeni Xhe Tabakwabbl KbluwaKapdbH DnAmetpi Bacy KbicbIMb MeH opTaHaH TeNkiu KUWTIH acepiHen YNFAHObl MymKH.

4.8 Kayinci3dk TexHnKac6b 60nbHwa KocbIMwa HycKaynap:

ECKEPTY - ΘραδηβIM KOPFAHbIe Ke3iπdipikTi TaFbIn JypiH3.

ECKEPTY -JneKtpnIK KypaJNbIe npaibIM eki KOJImMeH naJaHaHbIHbI3.

Ninriu TeceMeIepi axapnafbiu KypaImeH 6ipre XekTki3inreH XHe TaJan eTInreH KaFdaJa KOJaHaBbHb3.

Kypan MeH Kepek-Jkapak EHHipyWiciciHHyckaynapbIH opbHaHbI! DeHreJeKTePdi MaMeH COKKbIaH KOpFaHbI!

Akapnaftbiw dHreKeTepdi eHdipywiHHyckaynapbHa caikec YkblntbI caKTay XeHeKoJaHy KepeK.

Ewkaaah Keckiw DeHreIeKTePi ciIbpa axkapnay KymblCTapbi yuIN naiDanaHaBIs! Keckiw DeHreIeKTePre 6yInpNik KbICbIM KOJaHyFa TbInbIM caJIbHaBl.

AaBbIHdAmaHbI, MbICaNbI, KbICkBII KpyblfBnapDbH KeMeRimEn 6epik 6eKity XHe KByJXbIN KeTyDeH KopFay KepeK. YJKeH DaBbIHdAmanapDbI XeTKiNtI TypTe Tipen KOU KepeK.

BypaHdaJIb eHdIpMeci 6ap aMaJIb-caIMaJIb KypaIap naIdaIaNbIINFaH Ke3De, WnIHDeN bYwbl axapnaFbIu KypaI caHbIaNaybIHbIH TY6He Tmeyi Tnic. AImaJIb-caIMaJIb KypaI npeK OImacBIhIH Y3bIHbIFbl WnIHdeNb YwiH JeTKiIKTI eKeHdiRIHe Ke3 KeTki3iHi3. AImaJIb-caIMaJIb KypaIbIH npeK OImacbl WnIHdeNbDiH npeK OImacbl Ha Ceqke Kenyi Tnic. WnIHdeNb Y3bIHbIFbl MeH WnIHdeNb IpeK OImacbl H 4-5-6eTTeH XeHE «TexHnKaIbIK DepekTeP» aTbI 14.-6eJIIMHe KapaHbI3.

CtaqnoHapJIbIK copfbiW KypblfbiHbI naJaIaNHyFa KeHeC 6epinei. OpaaiBIM MaKC. XblbICTay Torbl 30 MA KypaTbIH FI aBTOMaTTbI axbipatKbIbIH (RCD) aIdbIH aIa KocbiHbI3. BypblTbIK

aXapnaFbIi FI aBTOMaTTbI aXbIpaTkbIu bApKbIbI eWipinrReH KaFaDaIa, acnantbI TeKcepy KHe Ta3anay Kepek. Ta3anay aTTbI 9.-6eImdi KapaHbI3.

3aKbIMdaJFaH, DeΦopMaζηFα γιδιρaFAH Hemece diipinndeɪntiH Kypaɪdapɒl naiDanaHyfA TbɪbIM caIbɪHaɒbl.

Fa3 Hemece cy K6bipnapbHbH, 3neKtpJIK XeJIineepiH XeHe KeTepriu Ka6bipfApadB(H (ctaTnka) 3akbIMdanybHa Konj 6epMeHi3.

KaHdai da 6ip peTey, KaTata ka6dbikay Hemece TexHNkaJIbIK KbI3MeT KepCeTy epeKeTIH opbIHdaMaC 6ypbIH KeJIiIK aHaHbI po3eTKaDaH sbIFapbIn aNbIHbI3.

Metabo S-automatic caKaTaNDbipFbIw MyfTacbl. CaKaTaNDbipFbIw MyfTa iCke KocblfAHaN XaFaDnDa, acnantbl Depey eUipiH3!

3aKbIMdaJFaH Hemece XapbIKwakTapbl 6ap KocbIMwa TYTkblTbI anMaCTbIpy KepeK. KocbIMwa TYTkblbI 6y3bnFaH acnNTbI naJaHaH6aHbI3.

3aKbIMdaJIFaH Hemece XapbIKwakTapbl 6ap KOpFaHbI W KaIINaKTbI aJImactbIpy KepeK. KopFaHbI W KaIINaFbI 6y3blfAH acnAnTbI naJaJaHa6bI3.

WafbIH daibHdamaJapdbI 6ektiHi3. Mbicanbl, onapdbI 6iJeK KbickbiHbHa KbcihbI3.

JahkykTeMeCin a3aIy:

ECKEPTY-EreyKmKaFa3bImeH axkapay, apanay, axkapay, 6ypfblay xhe baca da Kymblctapbl otki3reh Ke3de naJaDa 6oNaTbIH waHHbIH Ke6ip Typlepoi obIpdbI, Tya 6itKeH KEMictikTeppi Hemece Ke6eIo KyneCiHiH bace Da 3aKbIMdapbl TydblpaTbHbI 6enrini XmMnAIBK 3aTTapbl KaMTnbl. MyHdai XmMnAIBK 3aTTapblh 6ipHeWe Mbicanbl:

-KopFacbIH KAMTNTbIH 6oary iwiHderi KopFacbIH,
- Kpyblbc Kipniu, Cemnt neh 6aKa Kpiu Kanay 3aTteKepiHe naiDa 6oJaTBn MHepaJbI ShaH XeHe
-XIMINbIK KOJMeH eHdIeRc H CypeKTeri KUwana JHe XPOM.

Tayekel depexekci MyHdai KymbictapdbIH Tpyi KaHsaIbIKtbi KNI opbIHdIaNbIHdbIFbHa Taeyendi. MyHda xHMnIbIK 3aTTapdbIH ecepih a3aHTy ywiH: kETkiniKTI TypDe JeJIeTeIJRE H kaInapda Kymblc icTeHi3 XHe Kymblc bapbcIHda MInkpockonnIbIK 6eIweKTEpDi cy3rIney ywiH apHaibI a3ipJeHreH pecnnpaTOP cnaKtbi Xeke Kopfahlbic Ka6dbIFbIH KOJaDaHbIHbI3.

ByepekeBaMaTePnAnDapDaH,Mbicanbl, cyeKeTIn6enriniBipTypnepiHeH(EmeH Hemece WAMwATcyerHHaHb),MeTaIaNah,ac6ecTTeH naJa 6oJatbIHwaHaFa DaKaTbICTb6oJIbIN KeJeDi. BaCa6enrini CbIPKaTAPFaMbICanbl, anIepnraNbIK peakunnap XHe TbIHbIC any XoJapbIHbIH cbIPKaTAPbi KaTaIbI. WaHbIH deHere eHyIH 6oJdbIpMaHbI3.

MaTePnAJIbIbI3, Kbl3MeTKePJIep, XyMbIC XaFdaNbMeH XyMbIC OPhbl 6OBIHwa KOJdaHbIaTbIH DInpeKTINBaIapDbI XHe YJTTbIK HycKaMaIapDbI CaKtTaHbI3 (MbICAJIbI, eH6eRTi KOpFay epExeJIepi, KaDeRe Jkapaty).

KA3AKJWAKk

Painda 6oNaTbH 6eIikTepei dE con KepDe XnHaHb3, KopwaFaH opTaFa TycyIne Kon 6epMeHi3.

ApHaBj KymblcTap yuH japaMbI KepeKJapaKTapDbI naDanaHbIHbI3. OcbIaIwa KopwafAn optafa 6akblaycbI3 TycetIH 6eikTepeIN MeIwepi a3aIbIaNbI.

ApaHai bI waHcOpfbiUThb naHdaHaNbHiB3.

WahKyKtemecin a3aTu yuH:

• naJa 6oJaTBiH 6eJIkTePdi JxHe acnAnTbIH aya aFbIHbH e3iHi3re, aHaHaNbI3daFbl aamdapFa Hemece KaTkah WaHaFb 6aFblTTamaHb3,
• copFbI W KOHDbIpFbIHb XaHe/Hemece aya Ta3aJNaFbIUt bI KOJIaHaHbIHbI3,
• Kymbic OphbH JkaKcbIan KeIeTeIH3 Hemece copy apKbIbTa3a Kynde YcTaHbI3. KaIbIKtan KaTkaH WaHdbI CbINbIPbIHbI3 Hemece ypJen IblIFapbIHbI3.
  KopFaHbI KIMiJ KybIHbI3 HEmece WahbIc copbIHbI3. YpIeyre, KaFyfa HEmece KbJIwakneh Ta3aJayfa 60ImaMdbI.

5. Wony

2-6etti kapaHb3.

1 Quick Kbicna raikacbi*
2 TipeiyuФnaHeu
3 W n H d e Jb
4 ⅢnHdJIb 6ekiTkiHhiH TyuMeci
5 Kocy/ewipyre apHaJIFaH aybIcTbIpbIn-KocKbIiW
6 T Y T K bI W
7 3neKtpoHdbik cHrHaIdbik INHdkaTop
8 Aunany kuiirin peTeyre apHaIFaH peTteriW DeHReJek
9 BaTbIpMa aybIcTbIpbIN-KOCKblw*
10 Kocy Kynnb
11 KocbIMwa TyTKblw / dipiindi 6ackblw KOcblma TTKblw
12 Kopfahbii KaJnak
13 Eki caHbIaayIbraKa*
14 Eki caHbInayIbI kINT
15 KopfahbIi KaIINaKTbI 6eKiTyre apHaJIFaH iHTipeK

*Xa6bikTanyfaoaHnabHcTbI /KeTkiiIM XNbIHbTFbHa KipMeiDi

6. KolandaNbIcKa eHri3y

KoIaHbIcKa eHI3y aIbIHa dIa InpMaIbIK TaTaNwada KepeTINReH OMHaIbI KepHey MeHOMHaIbI JxNlIK TOK XeJIiHi3iIH DepeKeTpIe Caikec KeTeIHirHe K03 XeTKi3iHi3.
OpaaiMMAKc. KblbictayTorb30MA KypaHTbH FI aBTOMaTTbI aXbipaTKbiWBiH (RCD) aIbIH aJIa KocbiHbI3.

6.1 KocbIMwa TyTkbluTbl OPhaTy

OpHaTbIJFaH KocBIMwa TYTKblWneH (11) FaHa XyMbIC icTeHi3! KocBIMwa TYTKblWtBi acnantbIH cOn Hemece OH XaFbHa 6epiK 6ypan 6ekitih3.

6.2 Kopfahbiw kaJnaKTbI opHaTy

Kayinci3ik TypfbicihHaN TEK TnicTi a6pa3nBTi KypanFa apHAnFaH KopFaHbI W KaJnaKTbl naDanaHbHbIc! CoHdai-ak «KepeK-JapaKTap» atTb1 11.-6eImdi KapaHbIc!

Akapayra apHaIraH KopFaHbIw KaJnaK

Akapnaftbiu DeHreKeTepMeH, nameIbdi TipeyiuaXapnaftbiu Ta6aKwanapMeH, anMaCTbI KeckiudHreKeTepMeH Kymbic ICTeyre apHaNFaH.

3-6eTTeri C cypeTih kapaHbI3.

• NiIntipeKti (15) 6acbT typbHb3. KopFaHbIkaJnakTbI (12) Kepcetijirekynide opHaTbHb3.
• NiIntipekTi Xi6epin, on TipeInreHwe KOpFaHbiW KaJINaKTBbl 6ypaHbI3.
• NiHTipeKti 6acbIn, KopFaHbIi KaJINaKaTbI OHbIH Xa6bIK 6eJIri naiJaIaNHaNyWbIFra Kapan TypaTbIHdA etin bypaHbI3.
• Bepik opHaTbIINFaHbIH TeKcepiH3: niHTipeK 6ekTiin TpybIXeHe KopFaHbI W KaJnak aHaHmaybl Tnic.

KopfahbikannakTaH KEM
dereHe3,4 MM WamacbHa
WbIFbIN TpyaTbIH anMaIbICaMajbl KypanDapDbI
naJdaNaHbIHbI3.

(IIbIfapyopekeTTiHkepi petTinirimHeOpbIHdaJaBbl.)

7. Aхарларыш дэнгrelектiophату

KaTaa6bIKay 6oBihwa 6apbIK XyMbICTapdbH anDbIHda:KeiJIk aHaHbI po3eTKaHaC cybipHbI3. Acnan Kocblbn Tpybl XHe WnHdeJb Ko3FaIma Tpybl Tnic.
KeckiDAnHreKeTepMeH KyMbIC icTey yuH KAYinc3dk TpyfbicbHaH KeckiDAnHreKeKke apHaJFaH KopFaHbIkw KaJNaKaTbI («KepeK- kapaKap» aTb1 11.-6enimdi KapaHbI3) naJaHaHbIHbI3.

7.1 WnnndeIbdi 6ekityr

• UnnHdIb 6ekTIkiWHiH TyMeci (4) 6acbln, UnnHdIbdi (3) 6ekTIkw TyMeci Wepty DbIbICbIMeH TipeJIrReHwe KOJMeH 6paHbI3.

7.2 AkapnaftbIw dHreNekeTio opHaNactbIpy

2-6eTteri A cypeTih kapaHb3.

-Tipeyiw pfnaheu (2) wHnHeIbRe opHaTbIHb3.
PhaHeu WnHdEJIbe aHaJMaFaH XaFdaJa
dypbic opHaTbIHFaH den ecenTeJei.
Tek W 9-100: tipeiyu fnaHeu eki caHbIaybl
kTTtH KEMerimeh WaFBIn 6yblTbIFbl (DnaMeTp1
16 MM) KOfapbl kapan TypaTbIHDaan WnHDeJIbre
6ypan opHaTbIHb3.
- AxapnaftbiH deHreIeKti TipeyiH naneke (2) opHaJnactbipbIHbI3. AxapnaftbiH deHreIeK tipeyiH naneuH 6ipKeJI Kxahacybl Tnic.

7.3 Quick Kbcna raikacbH 6eKITy/6ocatY (ka6dbkTanyf aanhaictbl)

Quick kbcna raikacbH (1) 6ekity:

Quick Kbcna raikacbiH (1) TeK «Metabo Quick Kyyneci» 6ap acnantapfa opHaTbIb3. ByI acnantapbl «M-Quick» Jka36acbl 6ap Kbl3bl TycTI shnndelb 6ekitkiWiH IN TYmeci (4) apkblTaHyf a6oanaB

Erep Kbicy dHaana3OHBiHdaFbI aMaJIbI- canMaJIbI KypaIbIH KaJIbIHdbfBI 7,1 MM wAmacBHaH apTbIK 6oJca, Quick Kbicna raKacbIH naJaIaNyFa TbIbIM caJIbIHda! BynKaFdaJa eKi caHblayIb IraKaHbI (13) eKI caHblayIbI kInTneH (14) 6ipre naJaIaNbIHbI3.

• ⅢnHdienbdi6ektiH3(7.16eiminKapaH3).
• Quick Kbicna raikacbiH (1) 2 WbIFbIHKJI Jep UHHDeIbDiH 2 OnbIFbHa KipeTIHei UHHDeIbIe (3) opHaTbIHbI3. 2-6ETteri cpeTTI KapaHbI3.
• Quick Kbcna raikacbiH cafat tiinH 6afbItbImeH KOJMeH 6ypan tapTbIHbI3.
  -AxapnaFbiW DeHreNeKti caFaT TiniH 6aFbITbIMeH KUwTeN 6ypay apKbIbI Quick Kbicna raKacblh TapTbIHb3.

Quick kbicna raikacbH (1) 6ocaty:

Quick Kbcna raKacbl (1) opHaTbInBn TypFaHda fAna, WnnHdeIbdi Kbi3bn TycTi M- Quick bekitkiu TyMecimeh (4) TokTaTyfa pyKcat erineqi!

• Acnan eupinreHHe H KeiH nHepun 6oBbHwa Ko3fana 6pepi.
• AkapnaftbIeHreNEK ToJIbIK ToKTaMaC 6ypbln Kbl3bIn TycTI M-Quick uHHdEnb 6ekITkiuHIN Tymecin (4) 6acblb3. Quick kbicna raikacbl (1) 03 6etIHwe WAMAmEH 6ip Jkapblm aHaNbIMFa 6ocainda, OHbl KOcbIMwa Kyw Hemece apHaibl Kypan KondaH6aB 6ypan 7bIFapyfa 6onaDbI.

7.4 Eki caHbIJaIraKaHbI 6eKiTy/6ocaty (ka6dbIKTaJyFa 6aJNaHbICTbl)

Eki caHbIayIbI raIkaHbI (13) 6ekity:

Eki caHbIayIbI raKaHbIH 2 XaFbI 6ip-6ipHeH e3reweJeHedi. Eki caHbIayIbI raKaHbI WnHHdIbIe TEmHeDiE 6ypan opHaTbHbI3:

2-6etteri B cypeTin kapaHbI3.

-X)Kya aXapnaftbiW deHreIeKTep yuH: Eki caHbIaynbI raiKaHbIH (13) 6yblTbIFbl aXapnaftbiW dHreIeKTI MbIKtan Kbcy yuHJ Xofapbl Kapan Typ.

Y) KaIbIH axapNaIbIw DeHreIeKTeP ywiH: Eki caHbIayIbI raKaHbIH (13) 6yblTbIFbl eKi caHbIayIbI raKaHbI wnnHdeIbRe bepik 6eKiTy ywiH TeMeH Kapan Typ.
Z) Tek W 9-100 yllricHe:

Eki caHbIaynbI rAaKaHbI 6yblTbIfbTeMeH Kapan Typ Hemece Teric 6eti Xofapbl Kapan Typ.

• WnHdEnbdi 6ekTih3. Eki caHbIaynbI raKaHbI (13) eki caHbIaynbI kInTTiH (14) KEMeIImeH caFAT TiniH 6aftbIme H 6ypan TaptbHbI3.

Eki caHbIayIbI raKaHbI 6ocaty:

• IUnHdEnbdi 6ekTiHi3 (7.1 6eJIMiH kapaHbI3). Eki caHbIayNbI raKaHbI (13) eKi caHbIayNbI KJIITTIH (14) KeMeIImeH caFAT TiIHiH 6aFbITbHa KapcbI 6ypan WbIFapBiHbI3.

8. Пайдалану

8.1 Aunany xinirin peTey (xa6bikTaanyFa 6aunhaBicTB)

PetteriH deHreKeTe (8) ycbHbInFaH aHaNy xinirih petteHi3. (Kiwi caH = TeMeH aHaNy xiniriri; yNKeH caH = Kofapbl aHaNy xiniriri)

A6pa3nBt kecki, axapnaftbI W deHreNEk, axapnaftbI bactneK, anMaCTbI KeckiW DeHreNEK: Xofapbl aHany xiniri

KbIuwa: optawa aHany xiniri
Tipeiyu axapnafbu ta6akwa: TEmeH-optawa
aHany xiniri

Hyckay: Kblntbipaty Kymblctapbl yuhi 6i3in 6ypblTbk KblntbipaTkblTbl NaandaHaFKeHec 6epem3.

8.2 Kocyewipy

AcnantbI epaanbIM eKi KOJMeH YCTAn Tpyblh3.
AnMaIbI-caMaJIbI KypaJIbI daIbIHdAmFaTeK KocyJIbI KyIHHe anapbIHbI3.
KeHET icke KocbinybHa kon 6epMeHiz: Keiinik awa po3eTKaDaH cybipInFaH HeMece ToKneH Xa6DbkTay y3iJreH 6oNca, apdaiBIM acnantbl eWipiHiz.
Y3dkci3 JyMbICpeKMMiHde acnan KOnDaH TycipinreH JkaFdaIa da apbl Kapai JyMbIC icTei. CoHbIKTaH ePaIbIMacnAITbIeK KOImeh apHaBtTYTKbIHTapbIHah YcTaHb3, TypaKTbI KaNbINTa TypbIHb3 KHe 6ap Ha3apbIHb3DbI OPbIHdanaTbIH JyMbICKa aydpbIHb3.
Acnanka WaaH MeH KOHKaHbIH KyHBnaybIH Hemece TapTbIyBH 60JdbIPMaHb3. AcnantbI eWiprehHeKeIH K03FaNTkbIu TOnbIKTaI TOkTaFaHwa KOImaHbI3.

AybcTbipbn-Kockblwbl 6ap acnanTap:

Kocy: aybICTbIPbIN-KOCKblHTbl (5) aJFa XblJXblTbIHbI3. Y3diKci3 KymbicpeKmimi yuH aybICTbIPbIN-KOCKblHTbl TipelreHwe TEmeH KaibpblH3.

Θwipy:aybictbipbn-KOCKbluTbIH (5) apTKbl yuBih 6acbln xi6epiH3.

KA3AKJWAKk

《БектимейтihaxbipaTkbIbI》6ap acnantap (Kayinci3 ToKtaty yHKcnaCbImeH):

Kocy: Kocy KyIbnBn (10) KepeTki 6aftbImeH XblJXblTbIn, 6aTbIPMa aybICTbIPbIN KOckblWTbl (9) 6acblHb3.

Θwipy: 6aTbipMa aybICTbipIN-KOCKblWTbl (9) xi6epiH3.

W...RT 6enrici 6ap acnanTap: Kbicka Mep3imre kocy (Kayinci TOKtaty cyHKnraCbImeH)

Kocy: 6aTbIPMa aybICTbIPbIN-KOCKbIUtBt (9) anFa KapaJ XblJXkbITbIHb3 Da, CoDaH KeiH 6aTbIPMa aybICTbIPbIN-KOCKbIUtBt (9) Xofapbl KapaJ 6acblHb3.

Θwipy: 6aTbipMa aybICTbipIN-KOCKblWTbl (9) xi6epiHi3.

W...RT 6enrici 6ap acnanTap: Y3ikci3 xymbc pexnmi (ka6dktanyfa 6aHaNbIcTbI)

Kocy: acnantbI KofapbIa CnNaTTanFaHdai KocbHbI3. Ehdi 6aTbIPMa aybICTbIPbIN-KockblTbI (9) TaftbippeT anfa XblXbITbN XHe aIdbHfBj KaK KyIHne Xi6epin, 6aTbIPMa aybICTbIPbIN-KOCKblTbI (9) 6ekitiH3 (y3dikci3 Kymblc pekmi).

Θwipy: 6aTbIPMa aybICTbIPbIN-KOCKblWTbl (9) KOFapbl Kapai 6acbln xi6epihi3.

8.3 Kymbic 6oBbIHwa HycKaynap

AkapJay XaHe ereyKym KaFa3bIMeH aXkapJay:

Acnantb optawa KwHneh KbICbIN, DaNBHaMaHbIH 6eti KaTbKb36aunTBHda etin yCTiHi6et 6oBbIHwa aJfA-apTKa XblXkBiTbIHbI3.

Cnbypa akapnay: kakcbi Hetnxkere kon keTkizy yuH 30° - 40° opHaty 6ypbIbHda xymbc icTeHi3.

A6pa3nBti kecy:

A6pa3nBti kecy ke3iHne apdaibim
kapama-kapcbi 6aftbITneH (cypeTTI
kapaHb3) kymblc icTeH3. Kepi
kaFdaJa acnan keciKTeH KeHet
cekipin sbfby MymkiH. OptaHa,

eHdeIeTIh MaTePnAnFa JkapAmbl6epinicneH

Kymbc icTeHj3. KucainTyfa, 6acyfKaHe TeHCenTyre 6oImaMnDbI.

CbIM KbIIwAkapMeH Kymbic icTey: Acnantbl opTaWa Kywneh KbICbIHbl3.

8.4 PeDyKTop KopnycBn 6ypay

3-6eTteri D cypeTIH kapaHbI3.

-KyataaacbHTapTBINbIFapbHb3.
- NiHtipeKtiH (15) 6eKITkiu 6ypaHdacbH (a) 6ypan 7bIFapbIHb3. BypaHa MeH NiHTipeKti (Tabak 6eJirImeH bipre) 7bIFapbIn aIbIHb3 da, apbl KObIHb3.
- PeDyKTOp KOpnycbIHbIH 4 6ypaHdacbIH (b) 6ypan UblFapblHbI3. HA3AP AYdAPbIHbI3! PeDyKTOp KOpnycbIH cyblpbIn UblFapMaHbI3!
- PedykTop KoprnycbIH TapTy epekeTiHci3 KaKeTTi KyIre 6ypaHbI3.
- PeDyKTOp KOpnyCbIbIH 4 6ypaHdacbIH (b) 6ap npEk Oma XInTepiHe 6ypan kipri3iHi3! TapTy MOMeHTi = 3,0 Hm +/- 0,3 Hm.
- NiHTipeKti e3 opHbHa 6acBn TypaTbH cepiInneHi 6yinipRe XblNkblTbIn, NiHTipeKti (15) (Ta6ak 6oJIirMeH 6ipre) KaIta opHaTbHbI3 XKeHe 6eKlKiU 6ypanDAmen (a) 6ypan 6ekiriH3. TapTy MOMeHTi = 5,0 Hm +/- 0,5 Hm. NiHTipeKtiH dypbic KbI3MeT etIN TpyFaHbH TeKcepH3: on cepinne KepiNicIH actbHda 6onybl Tnic.

9. Ta3aJay

Kymbic 6apbicihda 3neKtpiik Kypandbih iihde Maepnai 6eIwueKtepi JINHanybi MymkiH. Byn 3neKtpiik KypanDbIH cyblbYbIH HaWapnaTadbl. Tok etkiiriwi eriHdi 3neKtpiik KypanDbIH KopfainTBH OKwaylaFbIWBH 6y3bIN, TOK COfy KayniH TydbipyMiMkiH.

3neKtpnik KypaIaFbI KipDi 6apNbIK aIbIHbIMeH apTKbl KeIeTy caHbInaynapbl apKbInbl KyIeNi Tpyde, JxJxHe MyKmT copbln Hemece Kypfak ayameh ypIen Ta3apTbIHbI3. ByI epeKeTTiH aIbIHda 3JeKtpnik KypaIbbl Kyat Ke3iHeH axkblpaTbIN, KopFaHbII K3iNdiPik neH pecnnpaTopdbI KIn aIbIHbI3.

10. AkayIbIKTapDbI XOHO

VTC JeHe TC 3JeKtpoHnKacbl 6ap acnanTap:

3NeKToHbIK CnHaIbIK HAnKaTOp (7) XaHbIN, KYKTeMe acTbIHdafta anHaY Xnijiri TEmeHneDi (W...RT yIrricInHe emec). Acnanika TYcKeH KYKTeMe TBIM KOfApbl! AcnantB 3NeKToHbIK CnHaIbIK HAnKaTOp cHReHwe 6oc Kypic KyiHne Kymbic ICTeTIHis.

Acnan Jxmbic icTemei Typ.3JeKtpoHdbik cnHaIdbIK HndkCaTop (7) (ka6dbIKTaIyfa 6aJNaHbictbl)

KobinbInkTaTaN. KaTt icke Kocblnydah
KopfaHbic icke Kocblndbl. AcnanTbH Kocybl
KyHHde XeJinik awa po3etkaFa caNbIHFaH HeMece
3NeKtp KyaTbIme HxabkTay y3iInReHHen KeHH
KaNNbHa KeIReH XaFdaJa, acnan icke
KocblMaNdb. AcnanTbI eWipin KaTt Kocblb3.

11.KepeK-kaPaKTap

Tek KaHa TynHycKa Metabo KepeK-KapaKaTapbIH KOJaHaHbIbI3.
6-6eTTi KapaHbI3.

Tek KaHa OcbI naHdanaHy BoHbIHwa HyckayIbIKTa KeTIpiINrRe H TaIaNTap MeH CnNaTTapFa cai KeJIeTIH KepeK-JkapAKTapDbI naDaIaNbHbIb3.

A Keckiw DeHreNeke apHaJIraH KopFaHbIi KaJINaKTbIH KbICKbIbI /a6pa3nBTi Kecyre apHaJIraH KopFaHbIi KaJINaK

KeckiW DeHreJekTepMeH, anMaCTbI KeckiW DeHreJekTepMeH XyMbIC icTeYrE apHaJIFaH. KeckiW DeHreJekKke apHaJIFaH KopFaHbI W KaIINaKTbIH KblCKbIbI opHaTbIJFaH KaFdAnDa, acNaNTbI abpa3nBti kecy ywiH naIdaIaHyf a6oJaBl.

B A6pa3nBTi kecyre apHaJraH aya TapTaTbIH KopfahbIsh KaIINaK

Anmactbkeckiw DeHreKeTepMeH TAC TaKtanapdbkcecyre apHaNFAH. Tnicti copfbiu KpybIbHbIH KEMeIMeH TAc WaHBIN Ketipyre apHaJIFaH KeNTe Ky6bIpbl 6ap.

C BeTrepdi axkapayra apHaIraH aya TapTaTbIH KOPFaHbI W KaNaK

BeToH, xancapcbiz eEHe, aFaW xHe CnHTeTnKaIbIK MaTePnaIapDbI aImac Ta6aKuAnbI axapNaFbIw DeHReJeKeTepMeH Hemece TaIbIKbI axapNaFbIw DeHReJeKeTepMeH xHe apHaBla axapNaFbIw Ta6aKuAnapMeH axapNayfa apHaJFaH. TniCTi copFbIw KpyblfBiHbIH KEMerimH Tac, aFaW xOHe PnactNK uHaBH KeTipyre apHaNraH KeNTe Ky6bIpblbap. YuKbIHbI copy Hemece MetanapDbI axapNay yuHxapaMaIdbI.

D卍HaHnKopFainbIn cy3ri

UafbH yraIb cy3ri KO3FaTkblu KOpnycbHbH iwiHe ipi 6eIweKTeprH kipyHe kon 6epMeiDi. Kyeni TypDe WbIfapBn Ta3anaHbI3.

E Kon KopraHbICbl

TipeyiTupeKemHe, Tipeiyu axapNaftiTa6aKaMaHe, CbIM KblNtApMeH KeHe KepaMnKaFa apHaIHaH anMaCTbI 6ypfBInay KopOHKaIapBIme XyMbIC icTeyre apHaNFaH.

KoI KopFaHbICbIH 6yIipNIk KocbIMwa TyTKbIHTbIH actbHa opHaTbIbI3.

F KocbIMwa TyTkbiwka apHaJIraH KeI NO3NURJbI KaNCbIPMa

Opypni TyTkbiu no3nua napbHa MymkiHdk bepeidi.

G KancbipMaHbIH KocbIMwa TyTKblwbl

Kepek-kaapakTapdbH ToJIbIK Ti3IMIH www.metabo.com caIbHa HeMece KaTaNOrTeH KapaHbI3.

12. XoHdey

3NeKtpnik KypaJaXeHDey KymbICTapbIH TeKaHa 3NeKtpsi MaMaH eTKi3y Tnic!

Bx3bnfAHKeJinikKa6enbTeK Metabo Kbi3MeT KepceTy opTaNbIbHda catbn anyFa 6oNaTbIH apHaBbl, TynHcycka Metabo KeJinik Ka6eJimeh aybictbipyFa pyKcat etinei.

MetaboФилпынha кендуdi кжET eTeTiH Metabo3ЛeКТрПИК КралДарБIMeH 6iPRe 6apbIbI3. Mekeнхайарь www.metabo.com caNTbIHda 6epinreH.

Kocajki6eJneKTePdiHti3ImepiH www.metabo.com caTbHaJxkyKeTn anyFa 6oJaBl.

13. Kopwafrn opTaHbI KoprFy

Akapnyan naJa 6oJaTbIH WaHda 3nHdbI 3aTTeKTepe 6oJybl MymKiH, COHDbIKTaH OHbl TnicHwe KeDere Xapaty Kepek.

PainanaHbIHaH acnTapbl, opaybiTapbl
XHe Kepek-kaPaKapdbI KOpwaFAn Opta YwIH
Kayinci3 Tpyde KeDere KaPaTy XeHe KaInTa eHDey
BoBHwa YTTbIK epExeJIepdi YCTahBIhB3.

TeK KaHa EO eJdepinHe: 3JeKtpnIK KypanDbI TyPmbictbIK KOkbicka TactamaHbI3! 3JeKtpnIK XaHe 3JeKtpoHdbI ecki Kypblfblnap XaHe YTTbIK 3aHfa TypneHdipy XeHiHderi 2012/19/EU eyponaBik DnpeKtNbacbHa cAnek, naDanaHbInFaH 3JeKtpnIK KypanDap 6eNeK XuHaBbIn, KopwaraH opTa yWih Kayinci3 KaTta eHdeyre Xibepinyi Tnic.

14. TexHnKaJIbIK DepeKTeP

$$ \varnothing = a n M a N b i - c a J M a J b i K y p a J d b i H M a K C. $$

$$ \begin{array}{l l} t _ {\max , 1} & = \text {e k i c a h b i n a y n b i r a n k a (1 3)} \ & \text {n a i n d a n a n h b i n f a n H K e 3 d e K b i c y} \ & \text {d i n a n a 3 0 H b i H d a F b i a J M a n b i - c a m a n b i} \ & \text {K y p a n d b i n M a k c . p y k c a t e t i n r e h} \ & \text {K a n b i H d b i F b i} \end{array} $$

$$ \begin{array}{l l} t _ {\max , 2} & = \text {Q u i c k k b i c n a r a i k a c b i (1)} \ & \text {n a i d a n a h b i n f a n H e 3 d e K b i c y} \ & \text {d i n a n a 3 0 H b i H d a f b i a J I M a N b i - c a I M a J b i} \ & \text {K y p a n d b i H M a k c . p y k c a T e t i n r e H} \ & \text {K a J b i H d b i F b i} \end{array} $$

$$ \begin{array}{r l} t _ {\max , 3} & = c \text {и b i p a} a x a k p a f b i w d e h r e n e k / k e c k i w \ & \text {d e h r e n e k :} \ & a \text {a m a n b i - c a n m a n b i K y p a n d b i H M a k c .} \ & \text {p y k c a t e t i n r e h K a n b i H d b i F b i} \end{array} $$

$$ M = \text {w n n H d e n b d i n} \text {H p e k o m a c b l} $$

$$ \mid = a x a p \Pi a f b i w \text {I I I N H d e n b d i n} \text {Y 3 b I H d b I F b i} $$

$$ n ^ {*} = 6 o c x y p i c k y i n H e r i a n H a n y k n i n i r i (m a k c. a n H a n y k n i n i r i) $$

$$ n _ {V} ^ {*} = \begin{array}{l} 6 o c \ \text {(p e t t e n e t i n)} \end{array} $$

$$ P _ {1} = \text {H O M I N H a N D b i T y T b i H b i J a T b i H K y a T} $$

$$ P _ {2} = \text {U b l F b l C k y a T} $$

$$ m = \text {x e n i j i k} \text {k a 6 e j b c i 3} \text {c a n M a f b i} $$

OJIuey MAnepi EN 60745 cTaHdapTbHa caIecenTeNeI.

II Kopfahbc KnacbHaFbI acnan

AINHbIMaJIbI TOK

• WE... 6enrici 6ap acnantap : 3heprnaTToIbI, Xofapbl xniinKiKeepriJep aHany xniiririH IyfbIn e3repictepiH tydbipyb MyMKH. Onap KeepriJep 6acblfah coH xokKa sbIFapblaBl.

KA3AKUAKk

BepinreH TexnkaJIbIK DepeKTepe yIxFapblHdbI ayblkynap 6Onybl MymkiH (JapaMdbI cTaHdApTTapFa caI).

3mncnnaibk kepcetkiwtep

AtanmbiW kepcTeKiWtep 3neKtpJik

KypaIapDbH 3MnCCnrcBih aHbIKtayFa JHe
eTppiI 3JIeKTPnIK KypaIapDbI caJIbICTbIPyFA
MymkiHdk 6peDi. PAnDaIahy XafDaIbHa KaPai,
3JIeKTPnIK KypaIapDbH Hemece anMaIbI-canMaIbI
KypaIdbH KyI 5bIHbI KYkTeMeHi KeTepyi
Hemece TMeHdTei MyMKIH. KMybICTaFbl
y3iNICTepdi KxHE qAzanapDbI aHbIKtay yWih
TMeHipeK KyKTeMeHi KamTaMaCbI3 eTIH3.
CaikeciHwe bemimdeJreH 6aFara cai
naJaIaNHybI yWIn KOpFaHbc IwapanapbIH,
MbCaIbI, YbIMdaCTbIPy WapanaPbIH aHbIKTaHbI3.

IipiniiH xajnnbI KepceTkiWi (yu 6afttbiBn BEKTopblIK KOcbIHDbicbl) - EN 60745 cTaHapTBHa caaahbiktalanaBl:

ah,SG =iipinH 3mncnnaK KepceTkiu (yctihri6eTTepdi aXapay)

ah,DS =ipinH mncnabIK KepceKiWi (ipeyiw axapnaftaTa6aKaMaMeH axapnay)

ah,P =ipinH 3mncnnaibKepceTkii (kblntbipaty)

Ks/GDS/P = anci3iik (ipin)

YJINJI A eIeMdi DbIbIC DeHreNi: LpA =Dbl6bIcTBkKbcBIM DeHreNi

LWA = DbIbICbIK KyaT DeHReiKA, KWA = dAnCi3dik

Kmbic6apbcbHda wbyin deHreii 80 dA) IamacbHaH acyI MmKiH.

Kopfahbiw Kyaakkan TaftbHb3!

EAC

Catbin anywblifa apHaJraH aknapaT:

Caikeciceptnuikatb:NeE30RU CDE.509.B.00161/20,koIaHbIy Mep3iMi 19.03.2020X.6actan 18.03.2025X.dein H,He3aBncmam 3Kcneptn3a>>xayanKepewniri Wekteyni cepiktectiri eHimdi ceptnuikkaTTay XeHHderi oprahblbepren;OphaIacAnxepi (3aHbI TyIaHbIH MekeHkaBbl) KHe NkI3MeT opHbIHm KeehkaBbl:115280,Pceen,Mckey KaIacbl,JeHHckar Cno6oDa KeWeci,19-yi,2- ka6at,21w8,21w9,21w10,21w11BeJmelepi; Tepeohbl:[phone];3NeKtpOndbIK nowTa MeekHkaBbl:[e-mail];AkkpeDITtey aTecTaB No POCC RU.0001.11F509, 09.09.2014X.

Caikecik TypabI DeKnapaun (RoHS):Ne E3O N RU I-DE.Γb09.B.00361/20, KondaHbIy Mep3iMi 06.03.2020 J. 6actan 26.02.2025 K. dein H, Hezabnma 3Kcpeptna> kayankepuiiri Weekteyni cepikTeCTiri eHimdi ceptnФnkattay XeHHderi opraHbI tipKeRHe; OphanackaH jepi (3aHdbI TYfAhn MeKeHxKaB) XeHne KbImET OPhbInh MeKeHxaBbl: 115280, Pceen, Maceky KaJacbl, JeHHcka CnofoDa KeWeci, 19-yu, 2-Ka6at, 21w8, 21w9, 21w10, 21w11 6eMenepi;

TeJefoHbI: [phone]; ΘneKtpoHdbIK noTAt MeKeHkaHbI: [e-mail]; AkKpeDHTey aTTecTaTbN POCC RU.0001.11ΓБ09, 09.09.2014 K.

EhnpwieJ:epmaHnna

Öhniþyù: "Metabowerke GmbH", Metaboallee 1, D-72622 Nuertingen, ΓερMaŋη

Peceire mnpTaybI:

KUKK «Metafo Ebpazna Pecen, 127273, Mckey

Bepesobaaannn Keweci, No 5 a, 7-KypbIbic, 106-KeHce
TeJ:[phone]

Hdiipinre HxblkypandbH aKnapaTbIK TaKaTaaCbIHda aa/xxK KIIiIMiHde KepcetJireh

ΘHIMHiH xapaMdbIbIK Mep3iMi 7 KbIaBb KypaIbI.

Hndipinren KyHHen Kein 5 KbIn caKtayda Tpyfah KaFdaIa, anDbIn ana TeKcePmecTeH naJaIaHaY YcbInbIMaIdbI

Пайдалануь сюнча hyckamаньн hykypacbl

1. Šañkeштигу Туypалу DeКларця

Typy JkaHa cepnIbIK HOMepn apKbIyy
6enrIneHren 6yn KblMaNoOuy MaunHa
TeMHKyIepRe JooN 6epepn H6n3 e3y6v3dYH JeKe
JooNKePcHINr6n3 MeHen XapBIAJn6bI3: *1),
DnpeKTbAHH 6apDbIK JxobOnopyHa *2) JkaHa
HopMaIapbHa *3).TexHnKaIbIK DOKymHTTepre *4)
-4-6ETtEn Kaparblna.

(cakTBIK KHONKacbl MeHeH):

Kny3yy: Kyry3yyHy 6eTTeIyTu (10) Xe6eHH 6aBbTi bOHOHa XblDbIPb?b3, aHdaH KInnH 6acBbU TpyHDeIy eUypn-KyIy3rYuTu (9) 6acbl?bl3.

Oурyy:Kotopryu (9)6aKbIyIh KoE bepnH3.

W...RT derehen 6eIrcn 6ap waimaHap: Kbicka Meehetke Kyry3yy (aBTOTOKTOTyy cyHKUcbl MeHeH):

Knyry3yy: KOTopryu 6aackbIyBH (9) aIbIra XblIbIpbIIN, KOTopryTu eIe Kapai (9) 6acblHbI3.

Ouyy:Kotopy (9) 6abckbH KoE bepnH3.

W...RT deren 6eJnnc 6ap shaMaHdap: TbIHbIMcbl3 nHTee peXmN (KOMnJIeKTaunra Jkapa)

Kyu3yy:waMaHdbI JxorOpya CypTeTReHDei Kyu3y?y3.BacbIy TpyHdery euypyn Kyu3ry4ty (9) 6np no3nura andbira Kbldbipbn, euypyn-Kyur3ry4ty (9) owoJ a6aJa da 6ekntyy yuyh, BacbIyTbI KOe 6epn?n3 (TbIHbIMcbI3 nWtEe pekmm).

Ouyy: bacbTupyHdery euypyn-KyHy3rty (9) eHDeHy Ke3deN 6acbIn, Kaipa KoE 6epn?u3.

8.3 Hh HyckamapbI

CTaHdapTTbIK XbIJMaJoo XaHa HaxJaK kara3bl MeHeH XbIJMaJIO:

CTaHOKTy opTo KUy MeHeH 6acbIn, daaPdJaMa MaTePnAnDbIn YcTsyKv 6eNpy 8e bCbIn Ketneu HyyH anDbira, apTKa XblnDipbHb3.

OdypakaJ KblMaJoo: KaKbI HaTbIJa anyy yUH 30^ -40?C 6ypu MeHe H NtTe Kepek.

XbIImmaNooy Terepek MeHeH Kecyy:

Kbimanooy Terepek MeHeH Kecn
KaTkaHa ap DaBIM NCKTNH
aHaNbIbIbHa KapbI (cypETy
KapaHb3) MHTe KepeK BoJbOco,
MaINHaHbH KecnIReH KepDeH

Ke3eMeJcY3 Tuyn KeTyy KOpKyHyy JapaJnat.
IwTeJIIN KaTKaH MaTePnaJra bIaNbIKTaIraH,
optOo Ky MeHen NtEE KepeK. OTe KbIwaIyyra,
aBbIKya KUY KeJItnpyyRe JHaHa MaWInHaHbI
yaukooro XoJ 6ep6eHn3.

3bIMdyu 贝Tkanap MeHeH NHTe:

MaunHahbI opTOO Kyy MeHen 6acbHb3.

8.4 PeDyKTOpdyN TylkycHyn aHnyccy

3-6eT, D cypeTyH kappaHb13.

-Po3eTkaaH BnJIkaHbI cyppyHy3.
- PbluargbH 6ekntyy 6ypamacbin (a) ybirapbn canbi?bl3 (15).BypamaHbI aIbn canbln, pbIardbI ybirapbn (KeI6npeK 3JeMeHTn MeHeh KOso),yETKe aIbn KOIO?y3.

• PeDyKTOpDyH TylkcyHyN 4 bypamacbIH (b) 6ypan yIrapb?bl3. KOHYI BUPYHy3! PeDyKTOpDyH Tylkcyu HyeNeHn3!
• PeDyKTOpDyH TylkycuH YeUneCTeH, KepeK TYy a6aIra bypa?bI3.
• PeDyKTopdYH TylkcyHyh 4 bypamacbIH (b) caBbHa 6bpan Kprn3n?n3! TapTbIN 6ypoo yUpy = 3,0 Nm +/- 0,3 Nm.
• PbyarDbI KepeKtyy a6aJda KaPmAn TyprAn npyXnHaHbI XblIbIbPbIN, 6eKnTyy 6ypMaCbI (a) MeHen TaPTTbIPbIN, KaipadaH (15) opHOTy?y3 (xejBnpek 3JeMeHTn MeHen KoWo). TapTBIn 6ypoo yUpy = 5,0 Nm +/- 0,5 Nm. PbyarDbIn nIHTeeCyn TekWeepn?n3: an npyXnHaHbIN Kuy anDbInDa 6onyu 3apbIn.

9. Ta3aJoo

IHTIN XaTKAHda MaUNHaHBi HcHHe KOOTOoY yAH OTpyn KaJIbIbI MyMKyH. ByJ 3NeKtp WaimaHbIH My3DaTyHy HaapNaTaT. Tok ETKepyyyu YAH 3NeKtp WaimaHbIH KOPROOy U30JraUcBbH 6y3yn, 3NeKtp COKkyCHy Anyy KOPKyHyUH XapA TbUbI MyMKyH.

Bnp bKtay 6aKaIT apaIbIbIHda aIDbIHkbI JkaHa apTKbI aba ainHtyyu Ke3eHKeTp apKbIpyy HdbTa3anAn Je KypraK aba MeHeY uJnTyn Typyy KepeK. An yUyH 3JeKtp WaimMaHBn 3JeKTp BynaBHaH axkIpaTbn, KoproOuy Ke3 aINHeK KaHa peCnnpatop KInyy 3apbl.

10. MyuIyTuKTepy OHoo

VTCKaHa TC 3JNeKtpoHnKacbI MeHeH Ka6DbIrlaH
WaimMaHdap:

3NeKtpoHdyk cnHraI nHdNkaTopy (7) Kyn, aHaHyy KbIITbIgbl KbICbIM acTbIHda a3aT (W...RT 3mec). WaimaHra

KeTnpiJrReH Kyu eTe QOH! WaiMaHdbI 3NeKToPOnDyK CnHaN INDnKaTOpY eUmEnyHue, Kpy KByrpyKTE NwTeTnN Tpy?y3.

3NeKtp WaimMaHbI NwTe6eJxataT. 3NeKtpoHdyK CnHaJnHdNkaTopy (7) (KOMnJIeKTAucncaBHa JapaWa)

6yn6ynden xata. KaTaN Knyry3yyHy 6eTTeeuy TsyMeK NwTeN KeTe. MaunHa Kyry3yIReHDe JKe KybaTbI eUypyIReHDoH KNINH Kaipa bepnIReHde UHPdyh BnPKacbl CaBbInbIn Typca, MaunHa Jypry3yIbEaNT. MaunHaHbI eUypn, Kaipa Kyry3yHy3.

11. Akceccyapnap

Metabo pmpMacbHaH yBikKaH TynHycka TaTnKTePepn RaHa KOnDoHyy CyHywTaJaT. 6-6eTTn Kaparbina.

Uyul6apakadaKeJtnpunreHtananTapraXaHa MyHe3dEmJIepTe TnNtYY akceccyapnapdbI rana KOnDoHryna.

A Kbinybitmanyy Koprooy kannak / Koprooy KaTama

Bypyyy kblmanooy MaunHaap, anMa3yy keyy mehen nIteere 6aibTTanraH Koprooy KaTamaHBn KbINbITMacbiOpHOTylnraHda,

KbIPrbl34Aky

Koproooy KaNKaK 6eNyyy 3JemeHT KaTapbI uHT.

B A6pa3nBdyy kecyy yuyh Koprooy kantama

Anma3yy Kecyyy TerepeKtep MeHeh Taaw
PnntaIapbH Kecyyre apHaIraH. TneWenyy
copDypyyy TY3Mek MeHeH Taaw YaHbH Ta3aNoOuy
TYTVrMeHeH.

C Kaannak KbIImaNooo NwTePnHe apHaIraH, copdypyyucy 6ap Koprooy kankak

Anma3 kanaTbIraH, ueyek cbImaJI Kne fIbpa
nckTeprn XaHa Tyypa KeJyyUy XbIMMaIOOuy
Ta6aKTapbl 6ap 6eTOHdy, CTXKaHb, XbIraTbI
XaHa NOJIMepJepeN XbIMMaIOOro apHaIraH.

Tneuenny y? copnyyy acnantbH xapdAmbI MeHen TaU, Xbira KHa NOpIMep y?dpbH copdyyn aIyyra 6aBbTTanrA H TYKcEcy MeHen.

YyKuHdapdbi copDpypn anyyra JMeMeTaIINbI KblMaNOOro Xapa6aNT.

D YaHra KapwblnBtp.

MaJa Ke3DyF qNJIbTp KbIMMbIaTkbIHTbIH TyNKcYHa np6eJyKqHeOpdyH Knpn KeTuWHeH CaKaTaN. FInbTpDi DaBIma yeuH, Ta3aAnan Typyy KepeK.

E Kondy Koprooy 3JemeHT

Tipeey Ta6ak, kblmnaooy Ta6ak, 3bIMdyy
IeTKanap KaHa KepamkaJIbIK NNITaJap YvH
aMa3dyy TeuKuTep MeHeN NWTeeRe
6arblTTaJIraH.

OnepaTopdyh Konyh Koprooy KapaxaTbI KaTaNdaRbI KOwymHa TyTkahbIH aJdbHa KOy KepeK.

F KoIyMa ca n yuH KeI no3nJyy cKo6a

CantbH a6aJIbIH ap Tpydyy aImaUItbIpyyHy KaMcbI3daNt.

G Cko6ac6b6ap YeuJme KoUymua can

AkeccyapnapbIH Tonyk KbiHaKTapbIH www.metabo.com caTbHaH JKe KaTaIOrDoH Kaparbla.

12. PeMoHT

3NeKtpnHCTpyMeHTTpeMOHTTOO aTaINaUbIraH TeIe yctakaHaJapbIHda

raha kypry3ynywyepek!

By3yIraH TapMaK Ka6eHH TynHycka Metabo Ka6eH MeHeH rHa aImaHTbipy Kepek. AhBi Metabo TeJnee 6Op6OpyHaH caTbIn anyyra 6oNt.

Metabo #nnpMaBcHbIH 3JIeKTp Jaa6DbIKTapbIH pEmoHTTOO yUyH Metabo EkyIuYJyIyHe KaipbIbHbI3. DapeKTePdN www.metabo.com caTbIHaH Ta6acbl3ap.

KamdbikTapdbIH Tn3MecnH www.metabo.com caTbHaH KyKTen anacbI3ap.

KpA, KWA = AHbIKcbI3dblk

IuTee y6aBbHda b3bIyUHyH DeHr3aNN 80 dA) YeHH KOrOpyaNT.

Koproooy Kynak 6eKnTknUtepnn kondohryna!

HnyrH KyHy MaMaHdbIH MaaNbIMaT TaKTabHa aa/xxkck opMaTbIHda KepcTeYrRe H Byomdyh KOndohy MeeHETy 7 kbI.

HnyyIReHnEHN KINH 5KbI caKTanca, anDbIH ana TeKwepn KePMeYHue, NWTeTyy cyHywTaI6aI

EAC

Anyyuy yuyMaJbImaT:

ShaKeTnK cepTnФkaTbI:Ne EA3C RU C-DE.ΓB09.B.00161/20, JapaKTyyJyK MoeHToY: 19.03.2020 - 18.03.2025-Ж., "Ke3 kaPahDbicb3 3Kcneptn3a" KooNKePunrNru YekTeJrReH KOOMy npOdyKuJHbI cepTnФkaUauNo oprAhI Tapa6bIHan bepInreH; KaIraUkAn Jepn (IopNiKaJIbIK TapaNTbIH daPeRi) JkaHa NsKePdIK Kypry3yJyUv dupeK: 115280, PocSna, MockBa 7aapbl, IeHHckA CnoBoDa KeYeCy, 19-yi, 2-Ka6at, 21w8, 21w9, 21w10, 21w11 BeMmEpy; TeJefoHy: [phone]; ΘneKtpoHdyK noTacbIHbIH daPeRi: [e-mail]; 09.09.2014-Ж. Ne POCC RU.0001.11ΓB09 aKKpeDntaUauNo aTTecTaTbI.

WaiKeTNIK DeKnapauncbl (RoHS): N2 EA3CN RU D-DE.Γ609.B.00361/20, KapaKTyynyk MoeHETy: 06.03.2020 - 26.02.2025-., "Ke3 KapaHdbicbI3 3KcpeTpN3a" KooNkepUInnRr YeKTeIReH KOOMY npOdyKcuaHbI ceTnΦnKauznNo OprAhI Tapa6bHaHn KaTTaIraH; KaIrauKan H Jepn (OpuDnKaJIbIK TapaNTbIH daPere) Jana NsKePdNK JyPrv3yVvUy DaPeK: 115280, PocCna, MockBa 7aapbI, JeHNHcka CnoBoda Keuecy, 19-yu, 2-KabT, 21w8, 21w9, 21w10, 21w11 6eImeLepy; Telefohy: [phone]; ΘneKtpOndYK nOHTacbHbIN daPere: [e-mail]; 09.09.2014-#. No POCC RU.0001.11Γ609 akKepeDnTaunqAunoo aTTecTaBl.

HdpyyIeH eIKe: TepMaHnIa
Hdpyyy: "Metabowerke GmbH", Metaboallee 1, D-72622 Nuertingen, TepMaHnIa
PocnJaIbI MMnopTTOOuy:
OOo "MeTa6o Ebpazra
Pocn, 127273, MockBa
BepezOBa aJIner KeU., 5 a, cTp 7, 106-KeHce
TeJ.: [phone]

OpnirhaIhcbIctpkci3ekpnyataii

f) He BnHOpNCToBvIe 3HoWeHI wIiIpyBaIbHi dNcN BiD eJeKtpoiHCTpymeHTIB 6IbWoO p03mipy. LNIiPyBaJIbHi DNcN, BnroTOBLeHi dIe JeKtpoiHCTpymeHTIB 6IbWoO p03mipy, He po3paXOBaHI Ha BnCOkY qAcTOTy oBeptAHHa MaIOra6apITnIX eJeKtpoiHCTpymeHTIB i TOMy MOJHyTb 3pyHbATnCra.

4.4 DoaTHOBI Bha3iBn 3 TexHInn 6e3neHH npu BiDpi3aHHi a6pa3NBHMn dNCHAMN:

a) YHHaTe 6JIOHyBaHHB BiDiPI3HOrO Kpyra Ta 3aHaTTO BnCOHO npNTnCKHO 3ycuJIa. He 144 BnKOHyIte 3aHaTTo rIb60i po3pi3n.

IpeBaHTaKeHHBidiPi3HOro Kpyra npNcKOpoe Ioro 3Hoc i 36iJIbUye cxINlbHicTb Do nepeKocy a60 6LOKyBaHHaIK HacLiIDOK-MOJINBicTb BiDaqi a6o pyHyBaHH.
b) YHnHaIte 3NaXoJHHeHH B 30Hi nepei BiDiPI3HM Kpyrom, IIO o6epTaCTbcra, I nO3aHy HbOr. Ppi 3MiueHHi BiDiPi3Horo Kpyra B O6pO6JIbOBAHii DeTalI B HAnpRMI BiD Ce6e eJeHTPOIHCTpyMeHT y BnPaIHy BiJaChi MOKe BiIDCKOHTN IIpRAHO Ha Bac pa3OM 3 DnCKOM, IIO o6epTaCTbcra.
c) Y pa3i 3aKlnHIOBaHH BIdpi3HOrO Kpyra a6o nepepNBaHH p06OTn BmKHiTb IHCTpymeHT i DOueKaIteC, NOH Kpyr NOBHCIO 3ynnHtbcR. HikoN He HamaraIteC BnTARHyTH BIdpi3Hn Kpyr, 0o O6epTaCTbcR, 3 po3pi3y - MoJInBa BiDdaua. BCTaHOBI Tb i ycHybTe npuHny 3aKlnHIOBaHH.
d) He BmHaIe IHCTpMEnT 3HOBy, RaHcO BiH BCE ue 3NaXoDnTBcB O6pO6JIbOaHIn DeTaJI. Ipeed npOoBHeHHm p60TH DooeHaIteCn, nOKn IHCTpMEnT DOcRHe PO6Ooi YactOTN o6eTahHr. IHaKwe MoHInBe 3aJaHnKpyra, INoTo BnCKaKbVaHHr 3 O6pO6JIbObaHOi DeTaJI a6o INoBa BiDaqi.
e)Пдпраite ПИNTи a60 3aROTOBн ВELHORO
po3mipy，u6 3HN3nTn pN3nK y BnnaKy
3aIDAHNBiDpi3Horo Kpyra. BeNiKI 3aROTOBKn
MOKytb nporHaTncr NiD BLaCHO BaroIO.
O6pO6JIoBAHy DeTaIb cIiD niDnnpaTH 3 DBOX
CTOpIH: 6In3bKO MICr BnKOHaHHr po3pi3y Ta
y3doBk II KpOMKn.
f)БудьTe OcO6LNo BO 06epeHHi npn BnKohHHi 3aRn6Hnx po3pi3iB CtiHax Ta iHxN X 3Ohax, 9o He nporlaIaOTbcra. Pnp 3aRn6JIeHHI DnCKa NiD yac pi3aHHa MOJINbN KOHTaKT 3 ra30-i BOdONpOBoDAmN, eJeKtpuHNO pPoBODKOIO Ta iHsMM No'kTaMn, 9o BnKlnHae BiDaay.

4.5 Oco6nBi Bka3iBn 3 TeXhIn 6e3neKn npu wliiphiBaHHI HauJaHm nanepom:

a) He BnHOpNCToBMyTe NaJdauHn nanip 3aHaTTO BeINKOro po3mipy, DOTpMnyTeCb IHcTpynciB Bnp6HnHa nanepy 0do Noro po3mipib. HaxdauHn nanip, 0o BVnCTynae 3a MeKi TapiluactoI OJIiFyBaJIbHO r Kpyra, MoKe CTaN pInuHIO TpaBM, 6LOkyBaHHr, PO3PNBy HaJdauHOrO nanepy Ta BiDaqui.

4.6 Tlbyn Ira MoJeIe WEV 15-125 Quick HT, WEV 17-125 Quick Inox, WEV 17-125 Quick Inox RT Quick Inox: oc06JIuBi Bka3iBn 3 TexHInn 6e3neKn npn noJipyBaHHI:

He donychaTe 3BncaHnHaCTNH noIpyBaIbHOro Kpyra, 30Kpema KpinNlBnHex shypiB. B6npaTe a6o ckopooyte KpinNlBHi shypu. HezakpinIeHi shypu, 1O o6epTaIOTBcra pa3OM 3 Kpyrom, MoKyTb 3aueHNTn BaWi naIbci a6o 3actprTn y cepeni Hi 3arOTOBn.

4.7 Oco6nBi Bk3iBn 3 TexHIn 6e3neHn npn BHKoHaHHi p6it 3 dpOToHHMn 1tKamn:

a) PpIMtB Do yBaru, 10 doptaHl 1iTHN BtpaHaOTb 1MaTOUHN dpOty TaOH npn 3BnuahHomy BnKOpncTaHH. He npnKnaJaTe 3aHaTTO BnCOHe pNTnCHNe 3ycnJIJI.
Bidiitaioui 1 matoounk npoTy moKyTb IerKo npoxOHTN cKpi3b TOHky TkaHHy OJrpy Ta/a60 npOHnKaTN B wKipy.
b)ПиВИКОРИСТАнHI 3axNCHORO KOKyXa He DONYCSHte NOrO KOHTAHTy 3ДрOTAHIOU ⅢITKOHO.TapIyactiI yawKOBi uiTKn nID DiEYO npNTHcHOrO 3ucIIJIa I BiDuceHTPOBnx CnI MOHyTb 36IbSByBatn CBi DIaMeTp.

4.8 DoaTHOBI Bha3iBHN 3 TexHIN 6e3neHn:

NONEPENHEHNAHnHaJraTe 3axnci OKyIepn.

NONEPEDHEHHI！IiD qacpo6OTn 3aBKnTpMaTe eJeKtpoiHCTpyMeHT o6oma pykam.

BnKOpNCtOByIte eJaCTNHi BklaIKn, RaKIO BOHn BXoJrTb IIO KOMJIeKTy a6pa3NHBHX IHCTpyMeHTiB i BnPo6HnK HanoJIrae Ha ix BNKOpNCtAHHI.

IOTpMMyTecb peKOMeHdaui Bnpo6HnKa IHCTpyMeHTy Ta npilaJa! 3axuatae DnCKn BiD NOTpanJHnMaCTnla Ta ydapib!

36epiraIte uIyBaIbHi DNCKn Ta NOBObTec3 HIMN BiIDNoBIDHO DO BkA3IBOK Bnpo6HnKa.

Hikoln He BnKOpncToByTe BiDiPi3Hi DiCKn DnIg 06DnPnHex pO6iT! Tpe6a yHNKaTH 6iHOro TnCKy Ha BiDiPI3Hn DNCK.

3arotobka noBHHa haIHy npIyraTn do
noBepxHi Ta 6yTu 3akpInJeHa BiD 3iCKOB3yBaHHa,
HAnpNKlaA, 3a DonOMoIO 3aTHcKNHX pNCTpoIB.
Jr BELHKnx 3arotobok Tpe6a nepe6aHTN
DOCTaTHIO ONOpY.

PnBHKOpNCtAHHi IHCTpyMeHTaJIbHnx HacaIOK 3
pi3b6oBOIO BCTaBKOIO KHeUb IINHDeIeI He
NOBHNrTOPKaTnca NepΦopOBaHOi OCHOBN
a6pa3NtBHOrO IHCTpyMeHTy. NepeKHaTecR, IO
pi3b6a IHCTpyMeHTaJIbHOI HacaIKM MaE DOCTAHTIO
DOBXHHy DnI KpInIeHnI Do IINHDeIe. Pi3b6a
IHCTpyMeHTaJIbHOI HacaIKN NOBHNHa CnIBNaTaTI 3
pi3b6oO IINHDeIe. DaHI UdoIO DOBHHN Ta
pi3b6n IINHDeIe IINB. Ha CTOp. 4-5 Ta Bpo3dIi 14.
TexhiHx xapaTepcntKN.

PeKOMeHdyEbCS BnKOpNCToBvBaTHn CtaioHapHy BNTJxHny yCTaHOBky. 3aBXKn iNkLIOuaynte npncptpi 3axnCHoro BiKIOUeHHn (Pi3B) 3 MaKcImaJIbHmC TpyMOM BtOKy 30 mA. NicIra BiKIOUeHHn KytOBoI WlIΦMaunHn npncTPOEM 3axnCHoro BiKIOUeHHn Tpe6a nepeBipHTn Ta NOuchTITN MaunHy. DInB. pO3dIn 9. YUnceHHn.

He BnKOpNCToBnyTe NOxKOdKeHi, EKcEHTpNHyTa Bi6pyOci IHCTpyMeHTaJIbHI HacaKn.

YHnKaIte NOxKOJHeHHra3OBHX Ta BODOpOBiDnHex Tpy6, eJeKTPuHoi npoBidHi Ta Hecyux CTIN (CTaTnKa).

Ipeed npoBeHnM pObit 3 HalaTByaHHn, nepeoChaueHHn a60 o6cLyroByBaHHn BNTrHiTb BnKy 3 pO3eTKn.

3anobixha MyfTa Metabo S-automatic. B pa3i cnpa2bOByBaHHra 3anobixHHOI MyfTH BiDpa3y BmMKHiTb MaunHy!

NoKoJKeHy a6o noTpPickaHy DoaTKOBy pyKoTky cIid 3amInHt. He ekCnIyataYte MaunHy 3 NoKoDKeHcOpy KoTkoIO.

PoiKoJKeHn a6o notpickaHn 3axnCHn KOxycnI3amHHTn. He eKcnLyatayTe MaunHy 3 PoiKoJKeHm 3axnCHm KOxYXOM.

3aKpInIIOHe MaJI 3aROTOBKn. BnKOpNCToByNe, HAnpNknaI, neuata.

3HHHeHHBnNBy nIy:

Пил,юуTBOPHOETbC npnpo60ti3цio MaunHOIO,MOKeMiCTHTpeOBOHN,YKI BnKlnKaOTb paK,aneprHni peakii, 3axBOPOBAHHHДnxaJIbHINX WJIAXIB,BPOdHexi DepeHTn Ta iHsi yWkoDHeHHpePpOdyKTNBHO CnCTeMNI.ДeRi3ZHXpeOBN:CbHHeCb (yΦap6i 3i BMICTOM CBNHIO),MInepaIbHNI pNl (3 6yDiBeJIbHOI cERII,6eTOHy Ta iH.),DomiUKN pN o6pOci DepeBHN (cIb xpOMoBOI KICLOTN, 3acO6N 3axNCtY DepeBHN),DeRi BNn DepeBa (depeBHNHNI IN dy6a Ta 6yka),MeTALn,a36ecT. CtynIb pn3Nky 3aJeHNr BiD TORO,RA DOBro KOpNCtByauch a60 iHsi IIOu N 3i3HaOTb WkIDINBOr OBnHBV.

YHnKaIte notpanJHnHnny ycepeDnHy tna.
JIa 3HNKeHHBnINBy WkIDINBnx peOBNH:
3a6e3neTte eEeKTHBHy BeHTnlaqIO pOboYO
MICua Ta KopNCtUInTEcR BiNOBiHNM 3acObAMn
3axNCTy, TaKIMn Jk Pecnipatop, 0o 3daTHi
BiDfJIbTpOByBaTN MiKpOckOniHi YaCTKn.

DToPmMyTecb npaBn Ta npnnciB CTOCOBHO BaWoRo MaTepiAly, nepcoHaLy, cfepn Ta Micza BnKOpNCtAHN (HapnKlaI, nOLOKeHH npo OxopoHy npaci, yTuNl3aCiIO TOnO).

3a6e3neuYte yIOBIOBaHHaNly B Micci YTbOpEHn, He dOnyckaTe NOro BiKnaDeHHa NaOBepxHax.

BnKOpncToByIe Ira cneuHx pO6it BiINOBiDHe npnaIaI (INB. po3di1 11.) - ce 3MeHwye HeKOHTpOJIbOBAHe NOTpanIaHHa WkIDInBnx peoBnH y DOBknIy.

BnKOpncToByIe BiIDNoBIiHi 3acO6N yIOBJIIOBAHNA nnly.

J3MeHHeHHBnNBy NnIy:

• He HaprablaIte Notik NobITpy, 10 BNXOHTb 3 MaunHn, Ha ce6e, IIOdei, RKi 3NaXoJrTbcN NOBNI3y, Ta Ha ChkynpeHHN NIIy;
• BHKOPNCTOByTe BNTJXHHI npnCTpi Ta/a60 OUYBaH NOBITp;
  -do6pe npoBITpOHTe po6Oye MicTe Ta 3a6e3neuYTe YnCTOTy 3a DOnOMOrOIO NnLOCOca. PIMiTahHra Ta BnDyBaHHra NiIIMae NnI y NOBITpR.
  -3axnchno OJr Tpe6a nnlococntu a6o npaTu. He moKHa noIro npOdyBaTu, Bn6NBaTu a6o YnCTHTU 1tKOIO.

5.Orna

ДиВ.стор. 2.

1 Wbndko3aTnckHa raKa Quick
2OnopHnIΦlaHeu
3 Unnndelb
4 Khonka fikcaui shnHdela
5Перемпау
6PyKoTHa
7 EneKtpoHHn CnHaJIbHn iHnKaTOp*
8 KoiilauTko IyBCTaHOBLeHHKiIbKoCTi o6epti
9 HaTnCKHn nepemHKauch

10Блokipatop ybIMKHeHHH

11 OdaTHKOBa pyKOaTka /doaTHOba BiOpONOrnHaIOUpa pyKoRTKa
123axnchnnKoKnyx
13 Raikka 3 DbOMa OTBopamn*
14 KJIIOU nID DBA OTBOPN*
15 BaikilkipinlenHa3axnCHoroKoHyxa

*3aJIeKHO BiD KOMnJIeKTAci/He BXoIHTb y KOMnJIeK T NOCTaHaHH

6. BBeDeHnB eKcnLyataciIO

Ipeed noaTkom po60n nepeKoHaTeC8, 10 Bka3aHi Ha TexHcHt TaBnUc npHlaNy

Ha npyra Ta YacToTa B Mepexi CnibnaIaIOb 3 DaHIMBaWoI eJeKtpomepexi.

3aBKnPiKIOuayTe npncTpii 3axCHOrO BiKNIOUeHn (N3B) 3 MaKcImMaJIbHM

CTPYMOM BHTOKy 30 mA.

6.1 BcTaHOBLeHHaDoatHOBoi pyKoTTH

PnBnKoHaHHI 6yDb-RAHxPo6iT3aBKnMae 6yTN BCTaHOBLeHaDoTaKOBa pyKOaTKa (11)!

OdaTKoBA pyKoTka KpinntbC3 IIBoro a60 npaBOrO 60ky MaunHn.

6.2 BctaHOBJIeHH3axnCHoro KOHyxa

3 MeTOIO 6e3neKN BnKOpNCToBnyTe 3axnCHN KOxUx, pnp3HaueHn dJa

BIDNOBIiHnX a6pa3nBnX iHcTpymeHTiB! NVB. TaKoX po3di 11. PpnilaIra!

3axnchnoKohxDna WliyBaHHa

PnH3NaeHn Ipno6ToN 3 O6DnprHmN DnCKaMn,
IamelbHmN WlifyBaJbHmN KpyramN,
aIMa3HmN BiDiPI3HmN DnCKaMn.

INB.CTOp.2,MaI.C

• HaTnCHiB BaKijb (15) i yTpmyTe Noro. BCTaHOBiTb 3axnChn KOKyX (12) Na Bka3aHe Micce.
  -BiDnyCITb BaHJIb Ta NOBepTaIte KOHX,DOHN BaHJIb He 3aΦIKCYETbcra.
• Hatnchitb Baikijb i nobephitb Koxyx 3aKpntoCTopoHOIO Do KopnctyBaaya.
• Ipepebipte HaDiHicThb NoCaIb: BaKJIb NOBHeH 3aΦiKcYBaTnC, 3axnCHn KOxH He NOBHeH o6eptatncr.

BnKOpncToByTe IHCTpymeHTaJIbHi HacaIKN, Iki 3axnCHN KOxYX nepeKpnBaC He MeHwe, HIX Ha 3,4 MM.

7. BctaHOBLeHnHaIiΦyBaJIbHOrO dNcKa

Ipe6ydb-RAHIMnpo6oTaMn3 nepeoChaueHHaBKnBNTraTe BnIKy 3 po3eKn.MaunHa nobHHa 6yTN BmKHeHa, nnHdJIb NOBHeH 3ynHHTncr.
Ipnpo6oTi3Bip3HMMDnCKaMn3MeTOIO 6e3neKnKopncTyntecra3axNCHM KOxYOM IINBip3aHHna6pa3NBHMnDnCKaMn (DNB. po3di11.PpnilaA

7.1ΦiKcaJia wHnHdeJra

• HatnchItb KhoNky fikcaqii uHHdela (4) Ta nobepHiTb uHHdela (3) pyko,doHKnHONKa He 3aphiKcytbcra.

7.2 BctaHOBJIeHHIJIyBaJIbHOrO nIcHa

INB.CTOp.2,MaI.A.

• BctaHOBIb onOpHn fIaHeCb (2) Ha IINHdeJIb. ΦlaHeCb BCTaHOBJeHn npaBnIbHO, RaIIO BiH He o6epTaETbcra Ha IINHdeJI.

TilbKn IJW 9-100/WP 9-100:HaKpyTiTb ONOpHnI ΦlaHeueK KIOUcH NiI DBA OTBOPN Ha WIIHHDeJIb TaK, Uo6 HeBeIINKb 6yptNK (DiaMeTpOM 16 MM) 6yb ObepeHn Doropn.

IJIpyBaJIbHn DNCK NOBHeH pIBHomipHO npIraTn Do PhaHc.

7.3 3aTgHeHHBbIckpyBaHHbWbNIO3aTnCKHOIraHbN (3aJIeXHO BIDKOMnJIeHTaii)

3aTARHeHHI WBnDKo3aTnCKHOI raHNI (1):

Ubnko3aTnckHaraKa(1)BCTaHOBIOeTbcTaIbKn Ha MaunHn 3 CnCTemo Metabo

Quick. Taki MaunnMaHOTb YepBOHy KHOHy fikcauiu HndJeia (4) 3 Hanncom M-Quick

IHKIO IHCTpyMeHTaIbHa HacaIka B Mlci 3aTnCKy MaE TOBUnHy 6,8 MM

3aTnCKHy raHky Quick BnKOpNCTOByBaTu He MoXHa! B uCybMy BnnaAdKy KOpNCTyItecraRHO 3 DbOMa OTBopamn (13) Ta BiDnOBiHm KInOyem NiD Dba OTBopn (14).

-3aφikcyIe wnnHdJIb (nVB. po3di7.1).
- BCTaHOBIb 5WbNIDKO3aTNCKHy raHy (1) Ha WnHnDeJIb (3) TaK, 0o6 0bNDbA BVCTynn NOnaJIb B Na3I. DnB. MaJ. Ha CTOp. 2.
-3aTnHtB WbNkO3aTNCKHy ray Ky pyKamN 3a RoHHNKOBIO CTPIKOO.
-NotyHKHM NOBOPOTOM JIyBaJbHOrO DnCKa 3a RoHHNKOBIO CTpiIKoIO 3aTARHITb WBNDKO3aTNCKHy raKy.

BidkpyuBaHHaBnKo3aTncHoIraHn(1):

Tilbkn BCTaHOBJIeHa WBNIDKO3aTNCKHa raiKa (1)do3BOJnE φIKCyBaTH uINHdJIb cheBoHOIO KhoNkoM-Quick (4)!

-Пись BiДКЛоуЕнЯ Maшини ДИСК OБЕТаETбся 3a iHepciEIO.
- HoJn WJIiFyBaIbHn IINCK MaJKe 3yNHHBcR, HaTNCHTb YepBOHy KHOJKy FIKCaqii 5HNHeJIa M-Quick (4). WBiNko3aTnCkHa rAIka (1) BiKpyUeTBcR cAMoCTiHNo pN6JIu3HO Ha NIBO6ePTn, nicra yoro MoKe 6yTu BIDKpyueHa 6e3 DoDAtKOBnx 3ycInb Ta 6e3 IHCTpymeHTiB.

7.4 3aTgHeHH/ BiKpyUyBaHHraHn 3 DBOMa OTBOpAMN (3aJIeHNO BID KOMnIeHTauii)

3aTaeHHraHn 3 DbOMa OTBopamn (13):

RanKa 3 DBOMA OTBOPAMM MaE DBi pi3Hi CTOpOHN. HaKpyTtB raiKy 3 DBOMa OTBOPAMn Ha WnHdJIb, Rk NOKa3aHO Ha MaIOHKnY:

ДИВ.стор. 2, мал. B.

-X)ДЯTOHнxшлфуBaIbHnxДИСКИB:

BypTNK raiKN 3 DbOMa OTBopAMN (13) NOBepHyTNI DOrOpN, 0o 3a6e3neUye HaDiHn 3aTNC TOHKX DNCKIB.
Y)ДЯTOBCTnxшлфуВальнхДиСИВ:
Буртугайки 3 Дбома OTВорами (13) NOВернтугий дОнИЗУ, со забeзпeчe надій He pO3TaшУВаHHЯгки HaшпнДeЛ.
Z) TiiBkn dna W 9-100/WP 9-100:
BypTN RaHn 3 DbOMa OTBopAMn NOBepHyTn DOHN3y, a pIBHa NOBepXHr -DOROpN.
- 3aφikcyi Te uHHnHdJIb. 3aTgHiTb raKy 3DbOMa OTBopAMn (13) BiIDNoBiDnHM KJIIOyem (14) 3a rOdiHHNKOBOIO CTpiIKKOIO.

BidkpyuBaHHraHKN3DbOMaOTbopamn:

-3aφikcyte winnHdJIb (nVB. po3diJ 7.1). BiKpyTITb raHky 3 DBOMa OTBopAMN (13) BiNoBIDHM KIOUcH (14) npOTn rOAnHHNKoBOi CTpiKN.

8. EKcnpnyataciia

8.1 BcTaHOBHeHHa KInbHocTi o6epTIB (3aJIeXHo BiKOMnIeHTauii)

BctaHOBiTb notpi6Hy kiIbKicTb o6epTIB 3a DonOMorOIO KOIIuataKa (8). (HeBeJIneKe YnCNo = Hn3bKa yactota o6eTpAHn; BeJIne Ke YnCNo = BnCoka yactota o6eTpAHn)

Kpyr nIa 6pa3nBHO BipiaHH, 06dnpHnx pObi, WlifyBaJIbHi YauKNI, aIma3Hi BiDpi3Hi KpyrN: BnCOHa yactota o6eptaHH

Uitka:cepeHnHaCTota 06epTaHHa

UJIiIyBaJIbHa TaipIIKa: BID Hn3bKOI Do cepeHbOJ YactOTN O6epTaHH

Bka3iBa: nIy noIpyBaJIbHnx po6IT MPeKOMeHdyEMO HaSy KyTOBy noIpyBaJIbHy MaunHy.

8.2 yBIMKHeHH/BMVKHeHH

IhctpymEnT 3aBKn Tpe6a TpImMaTH O6oma pyKaMn.

IiBbTe Do 3aROtOBKn TiIbKn yBIMKHeHn IHCTpyMeHT.
He donyckaIte HeymncHOro 3anycky: 3aBKnBmNkaIte iHCTpyMeHT, RaIO BnJa Ka 6yNa BVTRAHyTa 3 po3eTK a60 RaIcO CTaBCr 36iB nodaqi eJeKtpoeHepri.
Y peKnmi 6e3nepepBHOi pO60Tu IHCTpyMeHT npoDBKye npaIOBaTN, HABiTb RAIO BIN BnPBtbc3 pyK. Tomy 3aBKnDi MIcHo TpIMaTe IHCTpyMeHT DbOMa pyKaAM 3a pyKOaTKy, 3aIMiTb CTiKe IIOJXeHHI i NobHicTIO CKOHcHTpyNTecHa BnKohyBaHi ni po60ti.
He donyckaTe 3abnXpeHna a6o BCMOKTyBaHHI HCTpyMeHTOM NIIy I TnpCn. He klaTb BmKHeHneI eJIeKtpoiHCTpyMeHT Do NOBHOI 3ynHKn DBNrHa.

IHCtpymEnTu 3 nepemHaayem:

YbIMKHeHHa: nepecyhTe nepemHKauch (5) ynepeid. Ira po6oTu 6e3nepepBHomy peHimi nepecyhTe nepemHKauch Haazd do fikcauii.

BmKHeHHaTNCiTbHa3aHi KHeu nepemkaa (5) i BiPyctiTb.

IhctpymEn3 KnaBieo-BMnKaYeem (3yHHciEO abTomatNuHOi 3ynHHN)

YBIMKHeHHa: nepecyHbTe 6IokipaTop yBIMKHeHHa (10) y Hanpymky CtpiKn i HaTnCHiTb HAtnCKHni nepemHKau (9).

BIMKHeHHa: BiDnyCtITb HaTnCKHn nepemHKay (9).

Maunn 3 maphyBaHHm W...RT: Hopotkouachn peKm po60tn (3 yHkuieo abTomatnuHOi 3ynnnn)

YBIMKHeHHa:HaTnCKHn nepemHKauch (9) nepecyHbTe BnepeDi HaTnCHiThb nepemHKauch (9)yropy.

BIMKHeHn: BiDnyCtITb HaTnCKHn nepemHKay (9).

YKPAIHCbKAuk

Maunn3 maphybaHHm W...RT:

Be3nepepBHH pexHm po60n (3aJIeHHo BID KOMnJIeHTaui)

YBIMKHeHHa:YBMKHITb IHCTpyMeHT,RAO nHcHo Bnue.HaTnCKHn nepemKaay (9) ue pa3 nepeCyHBte BNpePei BiDnyCTtby nepeHbOMy noLOXeHHi DnA φikcaqii HaTnCKHOro nepemKaaya (9) (6e3nepePBn peJHM po60Tu).

BmKHeHHaTncHITb nepemHKaay (9) yropy i BiIpyctiB noRo.

8.3 Po6oqi Bka3iBHN

CTaHdapTHe wIiΦyBaHHia I wIiΦyBaHHa HauHaHm panepom:

PnTnckyIte iHCTpymeHT 3 NOMIPHM 3ycnllm I nepemiiuyTe NOro no nobepxHi Ha3aI bpeed, 0o6 nobepxHraarotobKn He neperpiBalaacr.

O6dnpHi p060Tu:ДЯ OTPMaHnДo6pOrpe3yIbTaTy npaCIOHe 3 KytOM HaxIny 30^ - 40^

Bidi3aHH a6pa3NBHMn dNcAmn:

Pn BiDiPI3aHHi a6pa3NbHmM INCKaMn 3aBKnI npauOHTe B 3yCTpiHOMy HAnpRmi (INB.

MaHIOHOK).IHaKWe iHCTpymeHT MoKe HecNoDiBaHO BnCKOHTN 3 npOnnly.

PpauoHTe 3 nomipHOIO nOdaueIO, BiINOBiDHO oObo6bIIOBaHOro MaTepiAly. He IOnyckaIte nepeKocy, He HATnCKaIte i He po3roIyIte IHCTpyMeHT.

06p06Ha npOraHmN 1tKamn:

NOMIPHO npNTnCKyIte iHCTpyMeHT.

8.4 NOBOPOT KOpNcCy peDyHTopa

INB. cTOp. 3, Man. D.

• BntaHnItb MepeKeBy BuNkU.
• BnKpyTITb KpinNtBnHT (a) BaKeIa (15). 3HIMITb TBnHT, BaKJIb (pa3OM 3JInCTOBm eJeMeHToM) i BiKnlaIbY6iK.
  -BnKpyTiB 4 rBNHTN KOpnycpeDyKTopa (b). YBArA! He 3HimaTe KOpnyc peDyKTopa!
• NObepHItb Kopnyc peDyKTopa B NoTpi6He NOJIOKeHHra, He 3HIMaOuN HOrO.
  -BkpyiTb 4 rBnHTn KOpnycpeyKtopa (b) B HnABHy pi36y! MomeHr 3aTyrBaHHra = 3,0 Hm +/ -0,3 Hm.
• 3MictiB y6ik npyHny, rka yTpmyc BaKilb B NOTpi6Homy noLoXeHHi, i 3HOBy BCTaHOBIb BaKilb (15) (pa3OM 3 JnCTOBm eJeMeHTom) Ta 3aTARHITb KpINHbHM TBnHTom (a). Moment 3aTAYBaHHra = 5,0 Hm +/- 0,5 Hm. IpepeBipTe npaue3daTHicTB BaKeJr: BiH MaE 6byt niD HaTAROM npyHnHi.

9. OyuüeHHa

Pnpo6oTi MoKJIInBe ChyUeHHaCTOK
Obo6bIOBaHOro MaTePiAly ycepeDiHi
eKeKtpoiHcTpymEtY. Ce noripWyE oxoJIoKeHHa
eKeKtpoiHcTpymEtY.CTpymOpBoiHi cKpyeHHa
MOKyTb NoripuHTn 3axNCHy i3oJIauIO
eKeKtpoiHcTpymEtY, uO BnKlnKae pN3NK
ypaxeHHa eKeKtpuHm CTpyMOM.

Yepe3 HeBeliKipibHIpomixnucy peTeIbHo OunuYne nepedhi 3aHi BeHTnlauiHi uINHH eEeKTPoIHcTpymEnTy a60 npOdyBaIte ix cyxIM NOBITpM. PepeDzHM BiID'EDHaNTE eEeKTPoIHcTpymEnT BID dKepeLa KInBleHnHaINbTe 3axNCi OKyIapri I pecnipatop.

10. YcyHeHHa HeCnpaBHOCTeH

IHCtpymeHTn 3 eJeKtpoHikO VTC Ta TC:

Topntb eJeKtpoHHn cnHaJIbHn iHnKaTOp (7), i 3MeHwcyTbcraYactota o6eptaHHn iD HabaHTaXHeHHm (He nIa

W...RT).3aHaITo BnCOKe HabaHTaKeHHa Ha iHCTpymeHT!XaIHCTpymeHT nonpaQHe Ha XOIOCTOMy XoDi, IOKN eJIeKTpOHHN CnHbHN iHdNKaTOP He 3rache.

IHCtpymeHT He npaioec. EJeKtpoHHn cnHahbHn iHdHaTOp (7) (3aJIeHHO BID KOMnIeKtauii) 6nMaEc. CnpaIOBaB

3axnCT BiD NOBTOPHoro 3anyChy. RaKuo npnyBIMKHeHomy IHCTpyMeHti BnIka Ka6eIIOHNBLeHHB CbTaBnEETBCa B po3eTKy, a6o NiCnRA360IO BiHDOBLeHO NODaCy ENEKtpOKNBLeHHN, IHCTpyMeHT He 3anyCaetbcR. BmKnHtbi 3HOByYBMKHITb IHCTpyMeHt.

11.Приладя

BnKOpncToByTe TiiBKn opnirHaJIbHe npnlaJaMetabo.

ДиВ. cTOp. 6.

BnKOpNCTOByIe TIlbKn Te npHJaDra, JKe BiINOBiDaE BnMOrAm i napaMeTpam ciie iHcTpyKcii 3 ekCnLyatauii.

A 3aTnch 3axnCHoro KOHxya IJI BIDpi3aHHa / 3axnCHn KOHyx IJI a6pa3NBHO BIDpi3aHHa

Pn3HaueHn Dn p60Tu 3 BiDpi3HmN Kpyramn, aIma3HmN BiDpi3HmN Kpyramn. 3i BCTaHOBLeHm 3aTtCKOM 3axNCHO KOxHyxa DnB iDiPI3AHH NHTMOnKHa BVKnOPNCTOByBaTN DnA6pa3NBHO R BiDpi3AHH.

B 3axnchnn KOxyn dIa6pa3HBHoro BiDpi3aHH

Pn3HaueHnn dI pyi3aHHKaM'HNX nIHT aIma3HmN BiDpi3HmN DnCKamN. 3 naTp6kom dIy BndaJIeHHKam'HHO NIIy 3a DOnomorOo BiIOBIDHO BNTJHKHO npNCtPOO.

C 3axnchHNOHYX3BHTAHHOIOIJI nlaCHOWlioyBaHH

Pn3HaueHnn IyIiHyBaHH6eToHy,CTXKNIiIIOr, DepeBHN i NOImepiB aIma3HmUuawKObIMN kpyramn a6o 6ipOBIMN kpyramn i

BIDNOIBHMMIJIiFyBaJIbHMMI TApIKaMn.3
NATpy6kom IJRA BITrAByBaHHaKAM'HOro,
DEpeBHoro i NOImepHOMy NIIy 3a DOnOMoROU
BIDNOIBHO RITJXHO rnpCTPOU.He nIXxOAnTb
DJIra BITrAByBaHHI CKOp Ta IJIiFyBaHHaMeTaNy.

DПило3axncnhiIbtp

Dpi6HONOpnCTnΦiNbTp 3anO6irae nonaDaHHIO BELINKHX YACTOK B KOpNc DBNrHya. PeryIpaHO 3HimaTe N OCHuYte FJIbTp.

E3axnctpyk

Pn3HaeyHnn Dny po6it 3 onopHO TapIKIO, WlifyBaIbHOIO TApIKIO, DpOTAHMn UITKAMN aIIma3HMn KInbueBmN CBepdAmN dIe PIIHTKn.

3axnchn eIemEny yCTaHOBIOeTbcra nD 6iHy DOaTKOBy pyKoRTky.

F Baratoon03nuiHa cKo6a B JHoCTi doaTHOBOI pyKoATHN

BctaHOBnHOeTbcB p3Hnx nOIOXeHHx.

GdoaTHOBA pyKoTHa-CKo6a

IobHn acOpTmEHT npHaJdNb. Ha caTi www.metabo.com a6o B KaTal03i.

12. PemoHT

Pemont eJeKtpoiHCTpymeHTy NOBHeH 3diIChIOBaTnCra TlBKn KBaIiΦIKOBaHmN BcA M- eJeKtpnKaMn!

Pn noKoJKeHHi 3'EnHyBaIbHOrO Ka6JIIO CIId 3amIHIT NOrO CneuaJIbHm Ka6eJIem.

CnHcN 3aNaChNX YaCTNH MOxHa 3aBaHTaXHTN Ha caTti www.metabo.com.

13. 3axnct doBknla

Пил, lo yTbOIOeTbcN npn IJIpyBaHHi, MoKe MicHTn shiDJIbI peOBOHN, TOMy NOrO cIid yTNI3yBaTHn HaleKHM YINOM.

DToPmMyTeCeHaioHaIbHnx npaBn 6e3neHoYtIi3aui i nepepo6Kn BkOpncTaHxIHCTpyMeHTIB, nKaYBaIbHnx MaTepiJIb InpilaJa.

Tilbkn dIy kpaIH EC: He yTuNl3yIte eIeKToPiHCTpyMeHTn pa3OM 3 NObyTOBmN BiXoDAMN! 3rIiHO 3 DnpeKTHBOHO EC 2002/

96/EG npo BnKopncTaHHi eJeKtpnHi eJeKtpOHn HnpCTpoi Ta BiIDNoBIDHMn HaizioHaJIbHMn HopMaMn BiIDpaCboBaHi eJeKtpoiHcTpymeHTN niJaRaHObPo3diJIbHi yTNIla3aui 3 MeTOIO IX noJaIbWoI ekOJorIHy Bo3neuHOI nepepo6Kn.

14. Texhichi xapaKtepncnkn

IorcheHHaDaHx,HaBeDeHHx Ha CTOp.4. 3aIIuMaEMO 3a cO6o npaBO Ha TexHiHi 3miHN.

0 = MaKc. iAmetp iHCTpyMeHTaJIbHOI HacaIKN

t_,1 = MaHC.ДОПЕТИМАТОВЦИН iHCTpyMeHTaIbHOI Hacadn B O6laCTi

3aTnCKy npn BnKOpncTaHHi raHKn 3 DbOMa OTBopamN (13)

t_max,2 = MaKc. DOnyCTnMa TOBUnHa iHCTpyMeHTaJIbHOI HacAdKn B O6laCTi 3aTnCKy npN BnKOpNCtAHHi WBnDKo3aTnCKHOI raKn Quick (1)

t_max,3 = 06dHnHn/BiDpi3Hn DnCK: MaKc. DOnyCTnMa TOBUnHa IHCTpyMeHTaJIbHOI HacaKn

M = pi3b6a winnHdela

IOBHHaIiYBaJIbHOro IINHeJIA

n* = yactota o6epTaHnHa XoIOCTOMy XOdi (MaKcHmAlbHa)

n_V^ = yactota o6epTaHHHa XoIOCTOMy xodi (pepyIbObaHa)

P1 = HOMHaIbHa cNoXnBaHa nOlyHHiCTb

P2 =BIDaBaHa nOtYHKHicTb

m = Bara 6e3 Ka6eIIO

Pe3yIbTaTn BmMIPBOBaHb OTPMaHi 3riJHO 3i CTaHdapTom EN 60745.

IHCtpymeHT Klnacy 3axnctTy II

\~ nepemHHn ctpym

* iHCTpyMeHTn 3 No3HaQKOIO WE... : NotyKHi BNCOKOaCTOTHI nepeShKOJN MOxyTb BNKLNaTH KOLINBaHHaCTOTNI O6epTaHH. PpN 3aracAHII nepeSHKOJ KOLINBaHH NpInNHIAOTbcR.

Ha Bka3aHi TexHiX hapaKTepcntKn IooHpiOIObCdOnyckn,pepe6aueHi diouHmN cTaHdapTaMn.

3haueHH emicii wymy

L3NaueHnI Do3BoJIOb OciHOBaTI i
NOPIBHOBaTN emiciO uMy pi3Hnx
eJeKTPoIHCTpymeTIB.3aJeKHO BiD yMOB
EKCnlyatauii, CTAny eJeKTPoIHCTpymeHTy a60
po6OuHX IHCTpyMeHITB fakTnUHe HaBaHTaKeHHa
MOHe 6Tu Bnue abo HnKHe. DnA OcIHKn
3pa3KOBOro pIBHa EMicII BpaxOByIte nepePBn B
po6Ot i Pa3n Po6ToN 3i 3HnKeHM (WymOBm)
HabaHTaKeHNM. Bu3Naute nepelik
opraH3auiHnX 3axOdi UoDo 3axNCTy
KOpncTyBaUa 3ypaxyBaHHaM Tnx a60 IHxN
3NaueHb emiciI uMy.

CymapHe 3HaueHnB i6pauii (BeKTopHa cyMa Tpbox HanpMIB) po3paxOByeTbc8y BiIDNOBIDHOCTi 3i cTaHdapTom EN 60745:

ah,SG 3HaueHnB i6paii (WJIiFyBaHHN NOBepxOHb)

ah,DS 3HaueHnB Bi6paui (WniIyBaHHn WnIiYBaNbHOIO TapinKOIO)

ah,P =3HaueHHBipapii (noipyBaHH)

K_h,SG/DS/P = K_oe i i eH T Noxnb（Bippaia）PBeHb3BykoBOrO TnCKy 3a TnnomA:

LpA =piBeH3ByKOBOToTnCKy

LWA =piBeHb3ByKOBoINotyKHOCTi

KpA, KwA = HoepiuiEHT noxnbH

LWA = helivoimsuse tase

I = slipeesan varpstas garums

n^ = apgriezenu skaits tuksgaita (maksimalais apgriezenu skaits) n_V^ = apgriezenu skaits tuksgaita (iestatams)

.(WEV 17-125 Quick Inox RT

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

aillll 1111111111111111111111111111111111111111

:3i 4.5

aaii 45 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

WEV 15-125 Quick HT - biaa 4.6

WEV 17-125 WEV 15-125 Quick Inox Jauu:Quick Inox RT

:all jlll plilily joll aolz oL 4.7

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

（）

:adul 4.8

a jil o jll lai jy la

4.8

1

aall 1ie g aikls o jao cks lai ay aai bai yai iai
ale!gaoill gaoall agaii all as jialll ciaai alej yale
!alall gaaai jn sa jayla
asall ciaai jg w s rnae gaiiaai gaii

gall gaoaill a glgll gglg 10gill 10g 10g 10g 10g 10g 10g 10g

i 1

Jai lssg. aalil Jaeu ayuaia yauaia cia oaii

auiio jie hai ay

jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll jll

aai jie 1

glgall aegy jgsjgsbbsjgsps

iill laiill Jdi jolalbi ale bllg 1jlaill jso gaiy

1 1

aie aji .5

a212.

a^x = 12 + 23 + ·s + + 1

2ac 占 4a 个

3.2

j j 4

5

6

7

* jjgl 8

*soli j cia 9

J 10

11

12

* jia 13

• jinian zhi 14

15

oJgall jzill jua / jzill kj

aaii aai i 1 jlll aill lai jai

W...RT aally s jalll (Dead Man's Switch

(9)

(9) jaij jil:

:W...RT aodally juaal cluSL

（jg2ill） jaiuall

1j j 0xie gao gao Ls aill Jy 1

（）(9）j（9）

Jaei 8.3

:

y j 1 y j 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

a 40-30

:abai

jai) jiaol ol yj 1 jao jao bll sic
jai jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jao jae iy Jgaiy Jgaiy Jgaiy Jgaiy Jgaiy

X 7.1 Jn Kaa Jss Jyol 1s 1

.(14) jiaell 13

$$ \begin{array}{l} j \text {j i} _ {\text {i}} \text {i} _ {\text {i}} \text {i} _ {\text {i}} \text {i} _ {\text {i}} \text {i} _ {\text {i}} \text {i} _ {\text {i}} = \ (\text {c b a l y}) \end{array} \quad a _ {h, S G} $$

$$ \begin{array}{l} (\dot {z} _ {\text {l a l l}} \text {j a w a p l i n e w l y} \dot {z} _ {\text {l a l l}}) = j l j _ {\text {i n t}} \dot {p} _ {\text {i n t}} \dot {q} _ {\text {i n t}} \ = j _ {1} j _ {2} j _ {3} \dots j _ {n} j _ {n + 1} \dots j _ {n + 1} \ \end{array} $$

$$ (j a. \omega) $$

$$ \begin{array}{l} (j \text {j i} _ {\Delta}) \text {i n} \text {j i} _ {\Delta} = K _ {h, S G / D S / P} \ \because \square \mathrm {a l l} (\square \mathrm {g a i l}) \sim \mathrm {g a i l} (\mathrm {s g i n a l}) \ \text {c o n s t a n t} \quad \text {b i e w i s e} \quad \text {s i g m a} = \quad L _ {\mathrm {D A}} \ \text {山} \quad \text {山} \quad \text {山} \quad \text {山} \quad \text {山} \quad \text {山} \quad \text {山} \quad \text {山} \quad \text {山} \quad \text {山} \quad \text {山} \quad \text {山} \quad \text {山} \quad \text {山} \quad \text {山} \quad \text {\Delta} = \quad L _ {W A} \ = \text {二} _ {\text {A}} ^ {\text {出}} \text {P A} \cdot K _ {\mathrm {p A}} \ \end{array} $$

(i) 80

1