KMF 240 - Milk frother Koenic - Free user manual and instructions

USER MANUAL KMF 240 Koenic

Safety instructions ΠRead this manual before first use thoroughly. It contains important information for your safety as well as for the use and maintenance of the equipment. ΠKeep this manual for future reference and pass it on with the product. ΠPay particular attention to the warnings on the product and in this manual. ΠUse the product only for its intended purpose. Improper use may lead to hazards. ΠIn the event of improper use or wrong operation, we do not accept any liability for resulting damages. ΠThe use of accessories and components not expressly recommended by the manufacturer may result in injuries or damages and voids the warranty. ΠNever leave the product unsupervised while it is switched on. ΠDo not place heavy objects on top of the product. ΠNever immerse electrical parts of the product in water during cleaning or operation. Never hold the product under running water. ΠDo not under any circumstances attempt to repair the product yourself. For servicing and repairs, please consult an authorised service agent. ΠThis product is not intended to be used by persons (including children) with reduced physical, sensory or mental abilities or lack of experience and / or lack of knowledge unless they are supervised by a person responsible for their safety or have received instructions on how to use the product. ΠChildren should be supervised to ensure that they do not play with the product. ΠThe mains voltage must match the information on the rating label of the product. ΠThe power plug is used as the disconnect device. Please be sure that the power plug is in operable condition. ΠOnly unplug from the power socket can separate the product completely from the mains. ΠAvoid damages to the power cord that may be caused by kinks or contact with sharp corners. ΠKeep this product including power cord and power plug away from all heat sources like for example, ovens, hot plates and other heat-producing products/objects. ΠOnly unplug from the power socket by the plug itself. Do not pull on the cord. ΠUnplug the product ... - when the product is not being used, - in case of malfunctions, - before attaching / detaching accessories and - before cleaning the product. ΠIf the power cord or the casing of the product is damaged or if the product is dropped, the product may not be used before it is examined by an authorised service agent. ΠA damaged power cord may only be replaced by the authorised service agent in order to avoid hazards. ΠCaution! In order to prevent hazards from unintentional resetting of the protective temperature limiter, this product must not be powered by an external switching device such as a timer, or connected to a circuit which is regularly switched on and o by a device. KMF240_A5_130322.indb 15 22/3/13 3:16 PMEnglish

ΠUse this product in dry indoor areas only and never outdoors. ΠPlace the product on a flat, sturdy and slip-resistant surface. ΠProtect this product from extreme heat and cold as well as from direct sunlight and dust. ΠIn order to reduce the risk of fire and electric shock, do not expose the product to fire (fireplace, grill, candles, cigarettes and so on) or water (water drops, water splashes, vases, tubs, ponds and so on). ΠWarning! Do not use this product near water or heavy moisture; e.g. in a damp basement or beside a swimming pool or bathtub. ΠThis product is not intended for commercial use. ΠIt is designed for household use and similar applications only, such as for example: - in employee cafeterias, in stores, oces and other commercial areas; - by customers in hotels, motels and other residential facilities; - in Bed and Breakfast establishments; - in farm houses. ΠDo not fill with milk past the maximum filling capacity. Hot milk may spray out. ΠWarning! Never open the lid during the frothing or heating process. ΠWarning! Never open the lid during use. ΠUse the product only with the base provided. ΠRisk of burns! Avoid contact with hot surfaces and escaping steam. Hold the product only by the handle. ΠKeep a sucient safety clearance around the product. Hot milk can cause severe scalding. ΠDo not move or transport the product during use or while there is hot milk in the thermos can. Spraying hot milk poses a risk of burning. ΠOperate the product only when it is filled with milk. ΠClose the lid when frothing or heating. ΠParts of the product become very hot. Unplug the product and let it cool down suciently ... - when the product is not in use, - in case of malfunctions, - before attaching / detaching accessories and - before cleaning the product. ΠSwitch o the product and disconnect from supply before changing accessories or approaching parts that move in use. ΠClean the product and all other accessories after each use. ΠFollow the instructions in the chapter Cleaning and care. KMF240_A5_130322.indb 16 22/3/13 3:16 PM17 English Content 1 x Base 1 x Lid 1 x Frothing attachment 1 x Stirring attachment 1 x User manual Technical Data Rated voltage: 220-240 V~ Rated input power: 500 W Rated frequency: 50/60 Hz Control elements

MAX level mark with stirring attachment MAX level mark with frothing attachment MIN level mark for both attachments

Switch button (operate with heater ON)

Switch button (operate with heater OFF)

Power cord with plug

Handle Congratulations! Thanks for your purchase of KOENIC product. Please read this manual carefully and keep it for future reference. Intended use This product is suitable for heating and frothing milk only. Any other use may result in damage to product or injuries. Before first time use Remove the product and accessories carefully from the original packaging. It is recommended to keep the original packaging for storage. If you wish to dispose of the original packaging, please observe applicable legal provisions. Should you have any questions regarding proper disposal, contact your local waste management center. Inspect the delivery contents for completeness and damages. Should the delivery contents be incomplete or damaged, contact your sales outlet immediately. After unpacking, please refer to chapter Cleaning and care. KMF240_A5_130322.indb 17 22/3/13 3:16 PM18 English

The milk frother must be correctly positioned on the base before operating. Frothing milk

1. Connect the power plug to a suitable

2. Open the lid and attach the frothing

attachment onto the rotating shaft.

3. Fill it with milk. The milk level must be

between the upper (MAX ) and lower marking (MIN).

4. Put the lid on firmly by pushing it down

5. Align the milk frother to the positioning

Frothing with heater ON: Press the button. The button lights up red. Frothing with heater OFF: Press the button. The button lights up blue.

7. The product will turns o automatically

when the milk is heated up or if you think froth is ready, you could also press switch button to turn o the product, then unplug the power plug from the power outlet.

8. Remove the milk frother from the base and

open the lid Note You can pour or spoon the milk from the milk frother. Caution Never open the lid during frothing. Do not remove the milk frother from the base during frothing. KMF240_A5_130322.indb 18 22/3/13 3:16 PM19 English

Caution Exercise caution if you have prepared hot milk froth, as it is hot and could scald you. Heating milk

1. Connect the power plug to a suitable

2. Open the lid and attach the stirring

attachment onto the rotating shaft.

3. Fill it with milk. The milk level must be

between the upper (MAX ) and lower marking (MIN).

4. Put the lid on firmly by pushing it down

5. Align the milk frother to the positioning

7. When the hot milk is ready, the product

turns o automatically. Unplug the power plug from the power outlet.

8. Remove the milk frother from the base and

open the lid Note If you wish to prepare more hot milk froth or more hot milk, let the milk frother cool down for a few minutes before further use. As long as the milk frother is hot, the thermostat prevents its being used. You can rinse the inside of the milk frother with cold water to accelerate cooling. Caution Take care that the hot milk can cause severe scalding. Caution Before exchanging accessory parts, the milk frother must be turned o and removed from its base. KMF240_A5_130322.indb 19 22/3/13 3:16 PM20 English Place frothing or stirring attachment to the lid fixture while the other to the rotating shaft. Cleaning and care

1. Warning! Unplug the product and let it cool

down completely before cleaning. Never immerse electrical parts of the product in water during cleaning or operation. Never hold the product under running water.

2. Warning! When cleaning, never use

solvents or abrasive materials, hard brushes, metallic or sharp objects. Solvents are harmful to human health and can attack plastic parts, while abrasive cleaning mechanisms and tools may scratch the surface(s).

3. Clean the product’s exterior surfaces with

a slightly damp cloth and then dry them thoroughly.

4. Make sure that no water enters the product

interior (for example, through the switch) or the base.

5. Clean the lid and the milk frother with hot

water and a little dishwashing detergent immediately after use. Do not clean in the dishwasher. Caution Not suitable for cleaning in the dishwasher. Do not dispose of this product as unsorted municipal waste. Return it to a designated collection point for the recycling of WEEE. By doing so, you will help to conserve resources and protect the environment. Contact your retailer or local authorities for more information. KMF240_A5_130322.indb 20 22/3/13 3:16 PMEspañol