SBS-KW-2000 - Scale STEINBERG - Free user manual and instructions

Product Type	Kitchen Scale
Brand	Steinberg
Model	SBS-KW-2000
Maximum Capacity	5 kg
Precision	1 g
Measurement Units	g, kg, lb, oz
Display	Backlit LCD
Tare Function	Yes
Automatic Shut-off	Yes, after 2 minutes
Power Supply	2 AAA batteries (not included)
Material	ABS plastic, stainless steel platform
Dimensions (L x W x H)	20 x 15 x 2 cm
Net Weight	300 g
Color	White
Care and Cleaning	Clean with a damp cloth, do not immerse
Safety Instructions	Do not overload, use on a flat and stable surface
Spare Parts	Batteries (not included)
Warranty	2 years

Frequently Asked Questions - SBS-KW-2000 STEINBERG

How to change the batteries of the Steinberg SBS-KW-2000 scale?

Open the battery compartment located under the scale, remove the old batteries and insert two new AAA batteries following the indicated polarity. Close the cover.

How to use the tare function?

Place an empty container on the scale, then press the TARE button to reset the display to zero. Then add the ingredients to the container.

What are the available measurement units?

You can switch between grams (g), kilograms (kg), pounds (lb) and ounces (oz) by pressing the UNIT button.

What is the maximum capacity of the scale?

The maximum capacity is 5 kg (11 lb). Do not exceed this limit to avoid damaging the device.

Does the scale turn off automatically?

Yes, the scale turns off automatically after about 2 minutes of inactivity to save batteries.

How to clean the scale?

Use a soft slightly damp cloth to wipe the surface. Never immerse the scale in water and avoid abrasive products.

What to do if the scale displays an error message?

Common error messages are 'Err' (overload) or 'Lo' (low batteries). Remove the excessive load or replace the batteries. If the problem persists, contact customer service.

Can I weigh liquids on this scale?

Yes, use the tare function with a suitable container. Make sure not to spill liquid on the device.

Is the scale under warranty?

Yes, the Steinberg SBS-KW-2000 scale has a 2-year warranty against manufacturing defects. Keep your receipt.

How to know if the scale is calibrated?

The scale is factory calibrated. To check, place a known weight (e.g., a 10 g coin). If the reading differs, replace the batteries. Recalibration is generally not necessary.

USER MANUAL SBS-KW-2000 STEINBERG

This User Manual has been translated using machine translation. We have made every effort to ensure the translation is accurate, but please note that automated translations are not perfect and are not meant to replace human translators. The official version of the User Manual is in English. Any differences between the translated version and the original English are not legally binding. If you have any questions about the accuracy of the translation, please refer to the English version, which is the official reference. More language versions are available upon request via [e-mail]

Technical data

Parameter description Parameter value
Product name		Crane scale
Model		SBS-KW-2000
Charger voltage [V~] / frequency [Hz]	Input	AC 230 / 50
	Output	DC 8.4 / 50
Output current [mA]		1000
Battery		Lithium 7.4V, 4500 mAh
Dimensions [width x depth x height; mm]		185 x 260 x 420
Weight [kg]		6
Lifting capacity [T]		2
Lifting hook opening [mm]		ø30
Measured lifted weight [kg]	Minimum	10
	Maximum	2000
Scale division		0.5 kg
Remote control operating range [m]		10
Operating temperature [°C]		-10 - +40
Operating humidity [% RH]		30 ~90
Remote control battery		AAA R03 (x2)

This product is designed to measure heavy loads while they are suspended. Typically attached to a crane or hoisting system, it allows for accurate weight measurement of objects being lifted, providing real-time data essential for industries like manufacturing, logistics, construction, and shipping.

Device description

A. Display B. Green light indicator – weight stabilised C. Middle red light indicator – tare D. Right red light indicator – battery charge status E. EXAMINE button – cumulative weight (see the "Inquire" button on the remote control). Long press this button to switch between red and green display characters. F. OPEN/CLOSE ZERO SETTING – on/off, reset to zero

Button	Function
“OFF”	Turn off, cancel and exit in settings mode.
“Rest”	Keep the current number unchanged, press this button again to switch between 0-9 in the setting mode.
“Saving”	Enter power saving mode, press this button again to restore normal operation.
“Sum”	Accumulate the current weight when the stable light indicator is on, and the minimum accumulated weight is greater than 20 divisions.Press to set the mode to shift numbers.
“Inquire”	Accumulate the current weight when the stable light indicator is on, and the minimum accumulated weight is greater than 20 divisions.Set the mode to shift numbers: query the following cumulative weightPress once N⋯xx to accumulate the number of timesAccumulate the first three digits of this weight by Hxxx twiceAccumulate the last three digits of this weight by Lxxx three timesPress to switch menus in setup mode.
“Zero/YES”	In weighing mode, set to zero and remove the tare.Press to confirm in setup mode.

Installation

Before first and each next use fully charge the appliance. Also install the batteries in the remote control by removing the cover of the battery compartment on the back of the remote housing.

Precaution

1. Do not load the scale with weight load exceeding the scale's maximum capacity!
2. This product is designed only for lifting and carrying heavy loads - do not leave a lifted weight hanging for a longer time on it.
3. Perform routine inspection and maintenance to ensure operation safety for these basic items:

a) Check the loose bolts. b) Whether the hook or shackle or any other component is cracked or distorted. c) If the mechanical components show signs of metal fatigue or defects. d) Whether the pin is off, or the components are lost.

1. Avoid any impact to the display panel.
2. Do not use the scale under wet or heavily polluted conditions.
3. To prolong the battery life, please recharge the battery every 3 months if not using the scale.

Device use

1. Turning on

Press and hold the power button for 3 seconds to start up and enter self-check power on. Turn on the device. The scale's maximum weighing capacity is first shown, and then the scale goes through a self-check sequence. After 0.0 is displayed and stable light is lit, the scale is ready for weighing operation.

1. Weight measurement

Once the load is suspended completely, the display shows the weight value of the load. When the "stable" indicator is lit, weight value can be recorded. In case there is tare such as cable, load the

tare and press "Zero" to zero the display to "0" kg. The weight value after this will be the net weight. This will not change until the tare change or the scale being turned off.

3. Turning off

After the weighing operation, the device should be turned off. Press and hold the power button for 3 seconds to completely cut off the power supply of the scale and prevent battery discharge.

4. Charging battery

• When the scale is low, if there is no display after charging for 2 hours, it indicates that the battery is difficult to charge or damaged. Please contact the supplier for repair or replacement.
• For lithium batteries, the electronic scale can run for about 40 hours when fully charged (about 5 hours). To extend the battery life, charge the battery promptly every 20 workhours.
• Using query, cumulative, saving power and reset functions

Button	Operation	Example
“Sum”	Press the “Sum” button to store the first weighing.
		1999 kg
“Sum”	Press the “Sum” button to store the second weighing, it can return to the weighing interface itself.
		2004 kg
“Inquire”	Press the “Inquire” button once to display the weighing times.
		n 02
“Inquire”	Press the “Inquire” button twice to display the first three digits of the total weight of 004003 kilograms.
		H004
“Inquire”	Press the “Inquire” button three times to display the last three digits of the total weight of 004003 kilograms Press the “yes” button to exit and return to the weighing interface.
		L003
“Rest”	Press the “Rest” button while weighing, and the stability light will flash.
		Weight of goods: 1994 kg
“Rest”	After unloading the goods, the weight remains the same. Press the “Rest” button again to return to the normal state, and the stability light remains.
Normal brightness of the display screen.
“Saving”	When the power is insufficient to complete the work, press the “Saving” button for energy saving. At this time, the power consumption is only 50% of the normal state. Press the “Saving” button again or turn on/off the machine to restore the normal state.

Calibration

NOTE: do not attempt to calibrate the scale without standard weight. Use the remote control to assist calibration.

Button	Operation	Display	Button	Operation	Display
“Set” password			“Yes”	Stay for more than 10 seconds and wait for stability
		00000			CAL00
“Rest” 5x			“Yes”	Press the hold key to switch between numbers 0-9,shift the cumulative key to input the weight of the weight and lift the weight, wait for stability
		5000			00000 The maximum range of this scale
“Yes”			“Yes”	After stabilization, press the confirm button to complete the calibration
		Set
“Inquire” 2x					Weight of weights
		CAL

CAUTION: the product generally require recalibration after replacing the motherboard in order to accurately weigh. The PA code is automatically generated after each calibration of the electronic scale:

Button	Operation	Display	Button	Operation	Display
“Set” password			“Yes”	Press the hold key to switch between 0-9 digits, and use the accumulate key to shift and input the original mainboard PA code
		0			XXXXFive digit numbers
“Rest” 5x			“Yes”
		5000			PA
“Yes” Set mode			“Inquire”
		5000			Weighting interface
“Inquire” 3x
		PA

Maintenance

a) Always unplug the device before cleaning it. b) Use only non-corrosive cleaners to clean the surface. c) Store the unit in a dry, cool place, free from moisture and direct exposure to sunlight. d) Do not spray the device with a water jet or submerge it in water. e) The device must be regularly inspected to check its technical efficiency and spot any damage. f) Use a soft cloth for cleaning. g) Do not leave the battery in the remote control if it will not be used for a longer period of time. h) Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal spatula) because they may damage the surface material of the appliance. i) Do not clean the device with an acidic substance, agents of medical purposes, thinners, fuel, oils or other chemical substances because it may damage the device.

Safe removal of batteries and rechargeable batteries

1.5V AAA batteries are installed in the device (remote control).

Remove used batteries from the device using the same procedure by which you installed them.

Recycle batteries with the appropriate organisation or company.

Disposing of used devices

Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device recycling and collection point. Check the symbol on the product, instruction manual and packaging. The plastics used to construct the device can be recycled in accordance with their markings. By choosing to recycle you are making a significant contribution to the protection of our environment.

Contact local authorities for information on your local recycling facility.

Caution

Measure

Precaution

Precaution

Precaution

Precaution

Precaution

Precautions

Precaution

Precautions

Precaution

Precaution

Precaution

Precaution

Gumb	Funkcija
“OFF”	Isključite, poništite i izađite u načinu rada postavki.
“Rest”	Zadržite trenutni broj nepromijenjenim, ponovno pritisnite ovu tipku za prebacivanje između 0-9 u načinu podešavanja.
“Saving”	Uđite u način rada za ušteđu energije, ponovno pritisnite ovaj gumb za vraćanje normalnog rada.
“Sum”	Akumulirajte trenutnu težinu kada svijetli stabilni svjetlosni indikator, a minimalna akumulirana težina je veća od 20 podjela.Pritisnite za postavljanje načina pomicanja brojeva.
“Inquire”	Akumulirajte trenutnu težinu kada svijetli stabilni svjetlosni indikator, a minimalna akumulirana težina je veća od 20 podjela.Postavite način za pomicanje brojeva: upitajte sljedeću kumulativnu težinuPritisnite jednom N⋯xx za skupljanje broja putaZbrojite prve tri znamenke ove težine za Hxxx dva putaZbrojite posljednje tri znamenke ove težine za Lxxx tri putaPritisnite za promjenu izbornika u načinu postavljanja.
“Zero/YES”	U načinu rada za vaganje postavite na nulu i uklonite taru.Pritisnite za potvrdu u načinu postavljanja.

Assembly

Precaution

Precautions

Precaution

Precaution

For the disposal of the device, please consider and act according to the national and local rules and regulations.

CONTACT

expondo Polska sp. z o.o. sp. k.