Q: What are the types of audio connectors on the HIGH ONE HI3224HD-VE television?

The HIGH ONE HI3224HD-VE television has three types of audio connectors : SPDIF Output (digital coaxial) - Side connector for high-quality digital audio output, compatible with modern amplifiers and audio systems Headphone Jack - Side connector allowing you to plug in headphones or an external amplifier. Important: you can switch between headphone mode and line mode (for amplifiers) as needed Composite AV Audio Output - Integrated into the composite RCA connector, with left and right channels The audio power of this model is 2 x 6W (RMS, 10% THD) with a NICAM compatible stereo system. Before connecting headphones or an amplifier to the headphone jack, check the output mode (headphone or line) to avoid damaging your hearing or your devices.

Q: What is steam washing on the HIGH ONE 510 C W566C washing machine and how do I use it?

Steam washing on your HIGH ONE 510 C W566C washing machine is a specialized program for disinfection and odor removal . The steam penetrates deeply into the fabric fibers to effectively eliminate germs and bacteria , preventing the formation of unwanted odors and protecting your health. This program is particularly suitable for items that require gentle disinfection. Program features: Duration: 1 hour 48 minutes Maximum load: 2.5 kg of laundry Washing temperature: 40°C Spin speed: 1,000 rpm How to use the program: Load a maximum of 2.5 kg of laundry - do not exceed this limit to ensure the effectiveness of the steam treatment Close the door Select the “Steam Washing” program You can add detergent or activate pre-wash if your clothes are very dirty Press “Start/Pause” to begin the program Available customizable options: You can customize your wash by adding a pre-wash (if the laundry is very dirty), an extra rinse (to reduce detergent residues), or disable the final spin by selecting the “No Spin” option if you prefer to air dry. Important: Strictly adhere to the maximum load of 2.5 kg to ensure the effectiveness of disinfection and proper functioning of the program. The program does not accept additional items once started. Do not add clothes during the cycle.

Q: What does the 3h light with the flashing padlock mean on my HIGH ONE DC 7 B W566C dryer?

The flashing padlock + 3h light indicates that the Child Safety function is activated on your dryer. When this protection is active, only the On/Off button works - all other buttons are locked to prevent a child from accidentally starting a cycle. The visible 3h may correspond to a delay that was programmed before the lock was activated. To deactivate this protection: Press the Anti-Crease and Delayed Start buttons simultaneously Hold them down for more than 3 seconds The light should then turn off and you will regain normal access to all buttons.

Question 1

Why does my HIGH ONE 10S49 D WAD929C dishwasher beep and go into error mode?

Accepted Answer

A beeping sound accompanied by switching to error mode generally indicates a problem detected by the appliance. Here are the most common causes and how to identify them:

Possible Causes and Diagnostics

1. Too long filling time ("Rapid" indicator blinks)

The dishwasher is not receiving enough water or too slowly.
Solutions:
- Check that the water supply tap is fully open
- Check that the water inlet hose is not kinked or blocked
- Check the water pressure of your installation (insufficient on some networks)

2. Temperature not reached ("Rapid" + "90 min" indicators blink)

The heating element is not functioning properly.
Solution: This fault requires intervention from a service technician.

3. Overflow/Leak detected ("ECO" indicator blinks)

An overflow sensor has detected a leak.
Emergency solution: Immediately close the water supply tap and contact a repair service.

4. Communication error ("ECO" + "Glasses" + "Rapid" indicators blink)

Problem with the electronic circuit or internal connections.
Solution: Request service intervention.

First Steps to Take

Observe which indicators are blinking (Rapid, ECO, Glasses, etc.) - this is crucial
Check that the water tap is fully open
Inspect the water inlet hose for kinks or blockages
Clean the filters and drainage area

If after these checks the problem persists or if indicators other than "Rapid" are blinking, it is recommended to contact an authorized technical service.

Question 2

What are the types of audio connectors on the HIGH ONE HI3224HD-VE television?

Accepted Answer

The HIGH ONE HI3224HD-VE television has three types of audio connectors:

SPDIF Output (digital coaxial) - Side connector for high-quality digital audio output, compatible with modern amplifiers and audio systems
Headphone Jack - Side connector allowing you to plug in headphones or an external amplifier. Important: you can switch between headphone mode and line mode (for amplifiers) as needed
Composite AV Audio Output - Integrated into the composite RCA connector, with left and right channels

The audio power of this model is 2 x 6W (RMS, 10% THD) with a NICAM compatible stereo system. Before connecting headphones or an amplifier to the headphone jack, check the output mode (headphone or line) to avoid damaging your hearing or your devices.

Question 3

What is the condenser on my HIGH ONE DC 7 B W566C dryer?

Accepted Answer

The thermal condenser is a key component of your HIGH ONE DC 7 B W566C dryer that transforms the water vapor generated during drying into liquid water through cooling. This condensation process captures moisture in the form of droplets that then flow into the removable tank located at the bottom of the appliance.

On your model, the condenser is located inside the appliance and can be accessed through the maintenance grille at the front (marked [9] in your documentation) after unlocking this hatch. It is accompanied by seals and locking levers that keep the system airtight.

Regular maintenance of the condenser: To maintain the efficiency of your dryer, the condenser should be cleaned approximately every 2 to 3 months if you use the appliance frequently. In case of less intensive use, you can space out these interventions.

Simple cleaning procedure (monthly): Remove lint from the thermal condenser with a sponge or a soft brush. This operation takes a few minutes and maintains good air circulation.
Complete cleaning (every 2-3 months): Allow the dryer to cool down, unscrew the maintenance hatch by unscrewing the two levers, pull the condenser towards you, clean it thoroughly with water only, let it drain, clean the seals, and then reinsert it in place.

A condenser clogged with lint significantly reduces the drainage of condensed water and causes longer drying cycles, increased energy consumption, and may stop the program if the water tank fills up. During complete cleaning, it is normal for residual water to flow out: place an absorbent cloth under the maintenance hatch.

Important points: Clean the condenser only with water, without using sharp-edged objects that could damage it. Never operate the appliance without its condenser in place. During drying cycles, it is normal for water to accumulate between the glass and the condenser seal; this does not affect the operation of your appliance.

Question 4

Why is my HIGH ONE DC 7 B W566C dryer not draining water anymore and how can I fix it?

Accepted Answer

If your HIGH ONE DC 7 B W566C dryer is not draining water anymore, several elements of the condensation circuit may be at fault. Here’s how to diagnose and resolve the issue:

Initial Checks

Check the tank: If it is full, it blocks the drainage of water to the pipes. Completely empty the removable tank located at the bottom of the appliance after each cycle.
Clean the condenser: A dirty condenser clogged with lint significantly reduces water drainage. Access the maintenance grille at the front (part [9]), unplug the appliance, then clean the condenser with a sponge or a soft brush after it has cooled down. This maintenance should be performed approximately every 3 months.
Clean the filter: The lint filter must be cleaned after each use to maintain good air circulation and proper drainage.

Checking the Drain Hose

Completely unplug the appliance.
Access the transparent (or semi-transparent) drain hose through the maintenance grille [9] at the front.
Check that the hose is not twisted, blocked by lint, or damaged (visible cracks).
Check the two connection points of the hose: at the outlet of the condenser and at the tank/external drainage.

If after these checks the water still does not drain normally, technical assistance may be necessary.

Question 5

How do I completely drain my HIGH ONE 510 C W566C washing machine?

Accepted Answer

To drain your HIGH ONE 510 C W566C washing machine, follow these steps:

Draining Procedure

Stop the cycle and wait for the machine to be empty and the cycle to be completed
Turn off and unplug the machine from the electrical outlet
Access the drain filter located at the bottom of the front panel of the machine
Open the lower cover by gently pulling it
Turn the filter clockwise to open it
Check that the water drains completely and remove any residue or foreign object blocking the flow
Close the filter tightly once draining is complete

⚠ Warning: The water may be hot - let it cool down before handling to avoid burns. Never handle without turning off and unplugging the machine.

Maintenance Tip: Regularly clean the drain filter every 3 months to ensure optimal operation and prevent water leaks or debris buildup.

If the water drains slowly or not at all, check that the drain hose is not blocked or kinked.

Question 6

What is steam washing on the HIGH ONE 510 C W566C washing machine and how do I use it?

Accepted Answer

Steam washing on your HIGH ONE 510 C W566C washing machine is a specialized program for disinfection and odor removal. The steam penetrates deeply into the fabric fibers to effectively eliminate germs and bacteria, preventing the formation of unwanted odors and protecting your health. This program is particularly suitable for items that require gentle disinfection.

Program features:

Duration: 1 hour 48 minutes
Maximum load: 2.5 kg of laundry
Washing temperature: 40°C
Spin speed: 1,000 rpm

How to use the program:

Load a maximum of 2.5 kg of laundry - do not exceed this limit to ensure the effectiveness of the steam treatment
Close the door
Select the “Steam Washing” program
You can add detergent or activate pre-wash if your clothes are very dirty
Press “Start/Pause” to begin the program

Available customizable options: You can customize your wash by adding a pre-wash (if the laundry is very dirty), an extra rinse (to reduce detergent residues), or disable the final spin by selecting the “No Spin” option if you prefer to air dry.

Important: Strictly adhere to the maximum load of 2.5 kg to ensure the effectiveness of disinfection and proper functioning of the program. The program does not accept additional items once started. Do not add clothes during the cycle.

Question 7

What are the durations of the different washing programs of the HIGH ONE 510 C W566C?

Accepted Answer

Here are the durations of the washing programs available on your HIGH ONE 510 C W566C washing machine:

Quick wash 15 min: 15 minutes
Quick wash 30 min: 30 minutes
Quick wash 45 min: 45 minutes
Cold wash: 1 minute
Delicate: 48 seconds
Delicate 30°C: 50 seconds
Synthetic: 3 h 18 min
Synthetic 40°C: 3 h 18 min
Cotton 30°C: 3 h 39 min
Cotton 40°C: 3 h 39 min
Cotton 60°C: 3 h 44 min
Cotton 90°C: 3 h 49 min
Intensive cotton 40°C: 4 h 22 min
Intensive cotton 60°C: 4 h 29 min
ECO 40-60: 3 h 08 min
Steam wash: 1 h 48 min
Drum cleaning: 1 h 18 min
Rinse and Spin: 20 seconds
Spin only: 12 seconds

Important: these durations are those displayed on the control panel. The actual duration may vary slightly depending on the load of laundry and the settings chosen, as your washing machine has an automatic load detection that adjusts the program accordingly.

Question 8

Which program should I use for a quick wash at 40°C on the HIGH ONE 510 C W566C?

Accepted Answer

The HIGH ONE 510 C W566C does not have a specific quick program that operates at 40°C. The three available quick cycles (15, 30, and 45 minutes) run at cold temperature or 20°C by default to optimize energy consumption.

If you absolutely want to wash at 40°C, you have two options:

Manually adjust the temperature on a standard program: Select one of the normal programs (Cotton, Synthetic, Wool depending on your laundry), then set the temperature to 40°C using the temperature control button. This approach allows you to choose the duration that suits you.
Use one of the quick cycles: If cold temperature or 20°C works for you, prefer the 45-minute quick cycle, which offers a good compromise for a small number of lightly soiled items (maximum load 2 kg).

Check the program table on your device or in the manual to verify the default temperature of each cycle and adjust your choice to your laundry needs.

Question 9

How to program channels on the HIGH ONE HI2422HD-MM television?

Accepted Answer

To program channels on the HIGH ONE HI2422HD-MM television, several methods are available depending on your needs and type of reception.

During the first power-on, the television will guide you through an automatic setup. You will first need to choose the menu language, then select your country/region (for France, you must enter the access code 1111). Next, indicate your type of antenna: Terrestrial antenna (Air) or Cable. Finally, start the automatic search by selecting the All option (all channels), ATV (analog channels only), or TNT (digital terrestrial channels). The television will automatically detect and store all available channels corresponding to your selection.

Subsequent automatic search: Access the main menu by pressing MENU, select Channel using the left/right arrows, then press OK. Choose Automatic Search and select the desired search type again (All, ATV, or TNT). This function will reindex all available channels.

Manual search: If you prefer to add channels individually, use the Manual TNT Search or Manual ATV Search options from the Channel menu. This approach allows you to configure each channel manually and precisely.

Channel organization: Once your channels are programmed, use the Channel menu to access management functions. You can change the order of channels via Modify Channels, manage your favorites via Favorites List, and activate the LCN function to sort and group your programs logically according to your region's standards.

Quick channel selection: Once programmed, use the numeric keys on the remote control to directly select a channel by its number, or press CH+ and CH- to navigate between successive channels. The FAV button gives you access to your list of favorite channels.

Question 10

What does the 3h light with the flashing padlock mean on my HIGH ONE DC 7 B W566C dryer?

Accepted Answer

The flashing padlock + 3h light indicates that the Child Safety function is activated on your dryer.

When this protection is active, only the On/Off button works - all other buttons are locked to prevent a child from accidentally starting a cycle. The visible 3h may correspond to a delay that was programmed before the lock was activated.

To deactivate this protection:

Press the Anti-Crease and Delayed Start buttons simultaneously
Hold them down for more than 3 seconds

The light should then turn off and you will regain normal access to all buttons.

User manual HIGH ONE : user manuals and guides in PDF

Models HIGH ONE most viewed

Browse manuals HIGH ONE by appliance type

Recent questions about devices HIGH ONE