HOMP150W - Hand blender HIGH ONE - Free user manual and instructions

Product type	Immersion blender
Brand	High One
Model	HOMP150W (988634)
Power supply	220-240 V, 50-60 Hz
Power consumption	300 W
Standby power consumption	0.16 W
Protection class	Class II
Maximum usage time	30 seconds per cycle
Recommended cooling time	3 minutes between cycles
Main functions	On/Off, Turbo (maximum speed)
Blade material	Stainless steel (not specified, realistic estimate)
Removable blending shaft	Yes, screw fixing
Maintenance of the blending shaft	Clean under running water without abrasive detergent
Motor unit maintenance	Damp cloth, do not immerse
Safety	Very sharp blades, keep out of reach of children
Warranty	2 years against manufacturing defects (upon presentation of receipt)
Storage	Cool, dry, dust-free place
Country of manufacture	China (realistic estimate)
Cable length	Approximately 1 m (estimate)

Frequently Asked Questions - HOMP150W HIGH ONE

How to attach the blending shaft to the motor unit?

Turn the blending shaft counterclockwise until it is tightly fastened. To remove, turn in the opposite direction.

What is the maximum continuous usage time?

The maximum usage time is 30 seconds per cycle. Let the appliance cool down for 3 minutes between cycles.

How to use the Turbo function?

Press and hold the Turbo button to use maximum speed. Release it to stop.

Can I clean the motor unit under water?

No, never immerse the motor unit in water. Clean it only with a damp cloth.

How to clean the blending shaft?

Wash the removable blending shaft under running water without abrasive detergent. Place it upright to drain any water that may have entered.

What to do if the appliance does not work?

Check that the blending shaft is properly attached and that the appliance is plugged in. If the problem persists, contact customer service.

Can I mix honey with this appliance?

Yes, to mix honey, add 150 g honey and 10 g maltose in a container, then blend for 5 seconds.

What is the warranty of this product?

The product is guaranteed 2 years against manufacturing or material defects, upon presentation of the receipt.

How to store the appliance?

Always unplug the appliance before storage. Store it in a cool, dry, and dust-free place, out of reach of children.

Are the blades removable and sharp?

The blades are very sharp and are integrated into the blending shaft. Handle the shaft with care when cleaning.

USER MANUAL HOMP150W HIGH ONE

Thank you for choosing this HIGHONE product. HIGHONE products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won't let you down.

We're confident your new device will be a pleasure to use every day!

Welcome to ELECTRO DEPOT.

Table of Contents

Product overview

Parts

Specifications

Product usage

Using your blender

Cleaning and maintenance

Cleaning and maintenance

Storage

Parts

A Switch button
B Turbo button
C Motor unit
Blend rod D Turn it anti-clockwise to lock with motor unit. To unlock, turn it in adverse direction.
E Blade (not shown)

Specifications

Model: 988634 - HO-MP150W

Operating voltage: 220-240V\~, 50-60Hz

Electric power: 300W

Off mode power consumption: 0.16 W

The period after which the equipment goes into off mode:

0 minutes

Protection class: Class II

Using your blender

Max operation duration per time should be less than 30 seconds, and 3 minutes rest time must be maintained at two consecutive cycles.

1. To assemble the blending rod with the motor unit, turn the blending rod anti-clockwise direction until it is tightened. To disassemble, just turn in the adverse direction.
2. Connect the hand blender with power outlet.
3. Lower the hand blender into food, and then press and hold the Switch button to start operating. To make the hand blender stop running, release the Switch button.
4. If you want to operate the hand blender under the high speed, press and hold the Turbo button. To make the hand blender stop running, release the Turbo button.
5. When stirring honey, add 150g honey and 10g maltose to container and stir. Work for 5 seconds.

Cleaning and maintenance

1. Unplug the appliance and remove the detachable blending rod.

NOTE: Do not immerse the detachable blending rod of the blender in water because overtime the lubrication on the bearings may be washed away.

1. Wash the detachable blending rod under running water, without the use of abrasive cleaner or detergents. After finishing cleaning the detachable blending rod, place it upright so that any water which may have got in, can drain out.
2. Wipe the motor unit with a damp cloth. Never immerse it in water for cleaning as an electric shock may occur.
3. Dry thoroughly.

CAUTION: Blades are very sharp, handle with care.

Quick cleaning

Between processing tasks, hold the hand blender in a cup half filled with water and turn on the appliance to make it run for a few seconds.

Storage

• Always unplug the unit before storing it.
- Store the unit in a fresh, dry and dust-free place, out of the reach of children and pets.
- Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.

Merci !

Bedankt!

¡Muchas gracias!

WARRANTY CONDITIONS

EN

This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase.* This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.

*proof of purchase required.

CONDITION DE GARANTIE

FR