HO-MP300W - Hand blender HIGH ONE - Free user manual and instructions
Find the device manual for free HO-MP300W HIGH ONE in PDF.
User questions about HO-MP300W HIGH ONE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Hand blender in PDF format for free! Find your manual HO-MP300W - HIGH ONE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HO-MP300W by HIGH ONE.
USER MANUAL HO-MP300W HIGH ONE
Thank you for choosing this HIGHONE product. HIGHONE products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won't let you down.
We're confident your new device will be a pleasure to use every day!
Welcome to ELECTRO DEPOT.
Table of Contents

Product overview
Parts
Specifications

Product usage
Using your blender

Cleaning and maintenance
Cleaning and maintenance
Storage
Parts
A Switch button
B Turbo button
C Motor unit
Blend rod
D Turn it anti-clockwise to lock with motor unit. To unlock, turn it in adverse direction.
E Blade (not shown)
Specifications
Model: 988634 - HO-MP150W
Operating voltage: 220-240V\~, 50-60Hz
Electric power: 300W
Off mode power consumption: 0.16 W
The period after which the equipment goes into off mode:
0 minutes
Protection class: Class II
Using your blender
Max operation duration per time should be less than 30 seconds, and 3 minutes rest time must be maintained at two consecutive cycles.
- To assemble the blending rod with the motor unit, turn the blending rod anti-clockwise direction until it is tightened. To disassemble, just turn in the adverse direction.
- Connect the hand blender with power outlet.
- Lower the hand blender into food, and then press and hold the Switch button to start operating. To make the hand blender stop running, release the Switch button.
- If you want to operate the hand blender under the high speed, press and hold the Turbo button. To make the hand blender stop running, release the Turbo button.
- When stirring honey, add 150g honey and 10g maltose to container and stir. Work for 5 seconds.
Cleaning and maintenance
- Unplug the appliance and remove the detachable blending rod.

NOTE: Do not immerse the detachable blending rod of the blender in water because overtime the lubrication on the bearings may be washed away.
- Wash the detachable blending rod under running water, without the use of abrasive cleaner or detergents. After finishing cleaning the detachable blending rod, place it upright so that any water which may have got in, can drain out.
- Wipe the motor unit with a damp cloth. Never immerse it in water for cleaning as an electric shock may occur.
- Dry thoroughly.

CAUTION: Blades are very sharp, handle with care.
Quick cleaning
Between processing tasks, hold the hand blender in a cup half filled with water and turn on the appliance to make it run for a few seconds.
Storage
• Always unplug the unit before storing it.
- Store the unit in a fresh, dry and dust-free place, out of the reach of children and pets.
- Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.

natural_image
Solid gray rounded rectangle shape with no text or symbolsMerci !
natural_image
Solid gray rounded rectangle shape with no text or symbolsBedankt!
natural_image
Solid gray rounded rectangle shape with no text or symbols¡Muchas gracias!
natural_image
Solid gray rounded rectangle shape with no text or symbolsWARRANTY CONDITIONS
EN
This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase.* This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.
*proof of purchase required.