Q: How to deactivate or stop the alarm on an AURIOL Z31915 weather station

To stop the alarm that is currently sounding: Press any key except SNOOZE/LIGHT The alarm will stop immediately It will automatically reactivate at the programmed time without manual intervention To postpone the alarm: Press the SNOOZE/LIGHT button The alarm will sound again after about 5 minutes Important: The alarm signal lasts about 2 minutes before stopping automatically.

Q: How to modify or change the weather forecast symbols on the AURIOL IAN 296289 station?

The weather forecast symbols cannot be modified or changed - they are automatically generated by the station based on atmospheric pressure analysis. The station displays symbols that indicate weather variations for the next eight hours and not the current weather . These symbols include: Sun: good weather Cloud with rain: rain Cloud with snow: snow Combination of rain and snow The symbols change automatically based on atmospheric pressure variations detected by the sensor. There is no user setting to customize or manually choose the displayed symbols. To improve the accuracy of the forecasts, you can check the pressure history of the last 12 hours via the HISTORY ABS/REL [38] button, which allows you to verify the barometric trend (upward arrow = increase, horizontal arrow = constant, downward arrow = decrease). You can also select your location via the CITY [39] button for a more precise localized forecast.

Q: How to adjust the brightness of the LCD display?

The AURIOL IAN 270302 weather station does not have brightness control for its LCD screen. The display is equipped with a fixed backlight that cannot be adjusted manually. If you are having trouble reading the display, here’s what you can do: Position the station in a location with adequate ambient lighting Adjust the angle of the device to minimize glare and achieve the best contrast Check the manual to ensure that the batteries are not low (a weak battery can affect the brightness of the backlight) Make sure the screen is clean and free of dust

Q: What type of weather station is the AURIOL HX075-0500600-AG-001 model?

The AURIOL HX075-0500600-AG-001 model is a radio-controlled weather station with a wireless outdoor sensor . It is a complete station designed for monitoring indoor and outdoor weather conditions. Its main features include: DCF77 radio reception - receives the atomic clock signal (range up to 2,000 km) Dual display - simultaneously shows indoor and outdoor temperature and humidity on an LCD screen Wireless outdoor sensor - transmits data up to 100 m away Weather forecast - displays symbols (sun, clouds, rain, snow) Two independently programmable alarms Automatic lunar phase and comfort symbols Min/Max recording - keeps track of temperature and humidity extremes The device operates on 2 AA batteries (or a 5V power adapter) and displays the time in 12/24 hour format. The outdoor sensor operates on 2 AAA batteries and can cover a temperature range of -20 to +50 °C.

Question 1

How to deactivate or stop the alarm on an AURIOL Z31915 weather station

Accepted Answer

To stop the alarm that is currently sounding:

Press any key except SNOOZE/LIGHT
The alarm will stop immediately
It will automatically reactivate at the programmed time without manual intervention

To postpone the alarm:

Press the SNOOZE/LIGHT button
The alarm will sound again after about 5 minutes

Important: The alarm signal lasts about 2 minutes before stopping automatically.

Question 2

How do I set the time zone on the AURIOL IAN 296289 weather station? The sunset time is displayed incorrectly.

Accepted Answer

Here’s how to set the time zone on your AURIOL IAN 296289 weather station:

Press and hold the MODE button for about 3 seconds until the screen displays "12 Hr" or "24 Hr" flashing.
Press MODE several times to navigate through the settings (time format, temperature unit, pressure unit) until you reach the time zone display.
Use the + and - buttons to set your time zone. The available range is -2 to +2 (offset from Central European Time - CET).
Press MODE to confirm your selection.

Example: If your time zone is one hour ahead of CET, set the value to +01. If you are one hour behind, set it to -01.

Why the sunset time was incorrect: Your station receives the time via the DCF radio signal, but the set time zone must match your location. An incorrect time zone setting causes a shift in all time calculations, including the sunset time.

Question 3

How to modify or change the weather forecast symbols on the AURIOL IAN 296289 station?

Accepted Answer

The weather forecast symbols cannot be modified or changed - they are automatically generated by the station based on atmospheric pressure analysis.

The station displays symbols that indicate weather variations for the next eight hours and not the current weather. These symbols include:

Sun: good weather
Cloud with rain: rain
Cloud with snow: snow
Combination of rain and snow

The symbols change automatically based on atmospheric pressure variations detected by the sensor. There is no user setting to customize or manually choose the displayed symbols.

To improve the accuracy of the forecasts, you can check the pressure history of the last 12 hours via the HISTORY ABS/REL [38] button, which allows you to verify the barometric trend (upward arrow = increase, horizontal arrow = constant, downward arrow = decrease). You can also select your location via the CITY [39] button for a more precise localized forecast.

Question 4

How do I install and set my AURIOL HG00870A alarm clock?

Accepted Answer

Here’s how to install and set your AURIOL HG00870A alarm clock:

Initial Installation

Insert 2 LR03 (AAA, 1.5 V) batteries into the battery compartment
The LCD display will light up with backlighting for 5 seconds

Setting the Time and Date

Press the MODE button to access the setup menu
Use the + and - buttons to increase or decrease values
Confirm each setting with MODE
You can set the 12h or 24h format, the date, the day of the week, and the time zone (from -12 to +12 hours)

Setting the Alarm

Press the ALARM button to access the alarm settings
Set the hour and minutes using the + and - buttons
Validate with MODE
The alarm will sound progressively in 4 stages and last for 2 minutes
To stop the alarm, press any button or wait for it to finish
The snooze function lasts 10 minutes - press SNOOZE/LIGHT

Synchronization with Atomic Time

This alarm clock receives the DCF 77.5 kHz signal for automatic synchronization
To force a manual synchronization, press the +/RCC button

Using the Backlight

Press SNOOZE/LIGHT to activate the backlight for 5 seconds

Question 5

How to set the location on the AURIOL IAN 277484 weather station?

Accepted Answer

The location setting on the AURIOL IAN 277484 weather station is done via the configuration menu of the base. Here are the steps:

Enter setup mode: Press and hold the MODE button for 3 seconds.
Access location settings: Use the -/ (minus) and +/12/24 (plus) buttons to navigate to the time zone and location setting.
Set your time zone: Select your time zone according to your region. It is from this menu that the station determines your position for weather information and sunrise/sunset times.
Confirm: Press MODE again to validate your settings.

Note: The station automatically receives DCF77 radio signals for precise time synchronization once the time zone is set. Make sure the base is placed near a window for better signal reception.

Question 6

The station clock is fast and displays an incorrect time

Accepted Answer

The Auriol IAN 275195 station displays an incorrect time generally for three main reasons: a time zone offset, a disrupted DCF synchronization, or an automatic recovery of the radio signal after a manual setting.

Check and correct the time zone: the station has an adjustable time zone setting from -12 to +12 hours. To check the current time zone, press the CLOCK button once: the time zone will appear on the screen. An incorrect offset is often the main cause of an incorrectly displayed time. You can correct it during the manual setting described below.

Manually set the time and time zone: press the CLOCK button for about 3 seconds. Press SET/RESET to select the time format (12h or 24h), confirm with CLOCK, then continue by selecting the language and time zone. At this stage, set the desired time zone from -12 to +12 hours using SET/RESET. Continue by setting the hours, minutes, and seconds. To speed up the process, hold down the SET/RESET button. Confirm each step by pressing CLOCK.

Be aware of the DCF signal taking control: after a manual setting, the device automatically receives the DCF synchronization signal (German atomic clock). If this signal is well received, it may automatically take control of the time and adjust the display again. If you are outside the DCF area (more than 1,500 km from Frankfurt, Germany), or if the reception is poor, prefer the manual setting.

Improve DCF signal reception: if the station displays an unstable or fast time, the reception of the DCF signal may be disrupted. Place the station near a window and keep it away from obstacles like thick concrete walls. Also avoid proximity to electrical devices (mobile phones, microwave ovens, radio devices, remote controls) that create radio interference.

Restart the station if necessary: remove the 2 AA batteries from the station for a few seconds, then replace them to force a complete restart. Also check that the outdoor sensor has new batteries, as a weak battery can affect the radio transmission between the two devices.

Question 7

How to adjust the brightness of the LCD display?

Accepted Answer

The AURIOL IAN 270302 weather station does not have brightness control for its LCD screen. The display is equipped with a fixed backlight that cannot be adjusted manually.

If you are having trouble reading the display, here’s what you can do:

Position the station in a location with adequate ambient lighting
Adjust the angle of the device to minimize glare and achieve the best contrast
Check the manual to ensure that the batteries are not low (a weak battery can affect the brightness of the backlight)
Make sure the screen is clean and free of dust

Question 8

What type of weather station is the AURIOL HX075-0500600-AG-001 model?

Accepted Answer

The AURIOL HX075-0500600-AG-001 model is a radio-controlled weather station with a wireless outdoor sensor. It is a complete station designed for monitoring indoor and outdoor weather conditions.

Its main features include:

DCF77 radio reception - receives the atomic clock signal (range up to 2,000 km)
Dual display - simultaneously shows indoor and outdoor temperature and humidity on an LCD screen
Wireless outdoor sensor - transmits data up to 100 m away
Weather forecast - displays symbols (sun, clouds, rain, snow)
Two independently programmable alarms
Automatic lunar phase and comfort symbols
Min/Max recording - keeps track of temperature and humidity extremes

The device operates on 2 AA batteries (or a 5V power adapter) and displays the time in 12/24 hour format. The outdoor sensor operates on 2 AAA batteries and can cover a temperature range of -20 to +50 °C.

Question 9

How to change the battery of the AURIOL IAN 101506 watch?

Accepted Answer

To change the battery of your AURIOL model IAN 101506 watch, follow these simple steps:

Open the back of the watch: Use a small flat screwdriver or a coin to gently lift the back cover. Be careful not to damage the case.
Remove the old battery: Once the back is open, locate the battery. It may be held in place by a small clip or holder. Carefully remove it.
Install the new battery: Insert a new battery of the same type, ensuring the correct polarity (+ and -). Make sure it is securely in place.
Close the back: Replace the back cover and press firmly to secure it.
Check the operation: Turn on the watch and check that the display is working correctly.

Regularly changing the battery helps ensure the proper functioning of your AURIOL watch.

User manual AURIOL : user manuals and guides in PDF

Models AURIOL most viewed

Browse manuals AURIOL by appliance type

Recent questions about devices AURIOL