IAN 345188 - Wristwatch AURIOL - Free user manual and instructions

Brand	Auriol
Model	IAN 345188
Product Type	Weather Station with Outdoor Sensor
Display Dimensions (HxWxD)	150 x 100 x 30 mm
Display Weight	200 g
Power Supply Display	2x AAA batteries (not included)
Power Supply Outdoor Sensor	2x AAA batteries (not included)
Outdoor Sensor Range	up to 100 m (open field)
Indoor Temperature Range	0°C to +50°C
Outdoor Temperature Range	-40°C to +60°C
Humidity Range	20% to 95%
Radio Controlled Time	DCF-77 (Germany) / MSF-60 (UK)
Alarm Function	Yes, with snooze
Date Display	Day, month, date
Temperature Trend Arrow	Rising, steady, falling
Memory Records	Min/Max temperature and humidity
Backlight	Yes, manual or automatic
Maintenance	Clean with a soft, dry cloth; no solvents
Safety Warnings	Keep away from water and direct sunlight; not for children under 3 years
Spare Parts	Batteries only; sensor not sold separately
Reparability	No user-serviceable parts; contact service center
Language of Manual	English, German, Finnish, Latvian, Polish, Swedish, Estonian

Frequently Asked Questions - IAN 345188 AURIOL

How do I set up the weather station?

Insert 2x AAA batteries into the display unit and 2x AAA batteries into the outdoor sensor. The units will synchronize automatically within a few minutes. Place the outdoor sensor in a shaded, dry location within 100 m of the display.

My display shows no outdoor temperature. What should I do?

Check that the outdoor sensor has fresh batteries and is within range. Press and hold the CHANNEL button to resynchronize. If the problem persists, try resetting both units by removing batteries for 10 seconds.

How do I set the time manually?

Press and hold the SET button for 3 seconds. Use the UP or DOWN buttons to adjust hour, minute, year, month, date. Press SET to confirm each step. The radio control will override manual settings if reception is available.

Why is the time not synchronizing?

Ensure the display unit is placed away from electronic interference (e.g., TV, computer). The radio signal (DCF/MSF) is strongest at night. You can manually start a sync by pressing and holding the REC button for 2 seconds.

How do I set the alarm?

Press the ALARM button once to view current alarm time. Press and hold ALARM until the hour flashes, then use UP/DOWN to adjust. Press ALARM again to set minutes. The alarm icon appears when active.

How do I switch between Celsius and Fahrenheit?

Press the °C/°F button on the back of the display unit to toggle between Celsius and Fahrenheit.

What does the battery indicator mean?

A battery icon on the display indicates low battery in the display unit. If the outdoor sensor batteries are low, the outdoor temperature area will show a blinking battery symbol. Replace batteries promptly.

How do I view the min/max records?

Press the MEM button to cycle through: current indoor/outdoor, min indoor/outdoor, max indoor/outdoor. Press and hold MEM for 5 seconds to clear all records.

The backlight is not working. How to fix?

The backlight is usually activated by pressing the LIGHT button on top of the unit. If it still doesn't work, check batteries. Some models have an auto backlight mode; refer to manual settings.

Can I use the outdoor sensor inside?

Yes, the outdoor sensor can be used indoors, but it is designed for outdoor use. It will still measure temperature and humidity. However, it may not perform as accurately in direct sunlight or extreme conditions.

USER MANUAL IAN 345188 AURIOL

WATCH AND JEWELLERY SET

GB

WATCH AND JEWELLERY SET

Operation and Safety Notes

FI

RANNEKELLO- JA KORUSETTI

Operation and Safety Notes Page 5

FI

E HG08172B

Introduction Page 6

Preparations for use Page 6

Changing the battery.... Page 6

Display.... Page 7

Technical Data Page 8

Scope of delivery Page 8

Setting the time.... Page 9

Watertightness Page 9

Shortening the watch strap

Model No. HG08172B Page 10

Removing Segments (Fig. C) Page 10

How to exchange the pin inside

the slider (Fig. D, E, F) Page 11

Shortening the watch strap (HG08172C) (Fig. G)... Page 11

Cleaning and maintenance Page 11

Disposal Page 12

Warranty and service.... Page 13

Warranty Page 13

Warranty claim procedure.... Page 15

Service Page 15

WATCH AND JEWELLERY SET

Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Preparations for use

Changing the battery

Note: Have batteries changed in a specialist shop.

Display

1 Minute hand 2 Crown 3 Second hand 4 Hour hand 5 1st position 6 Segment (for model HG08172B, C)

7 Repair set (for model HG08172B) 8 Slider (for model HG08172B) 9 Spare pin (for model HG08172B) 10 Bottom cover (for model HG08172B) 11 Fastener (for Model HG08172C only)

Technical Data

Battery: 1 x 1.5 V = Button cell (Type SR626SW)

Model number:

HG08172A: Gold, Grey strap

HG08172B: Silver, Silver band

HG08172C: Gold, Gold band

HG08172D: Rose gold, Black strap

HG08172E: Silver, silver strap

- Scope of delivery

Immediately after unpacking, please check the package contents for completeness and ensure that the product and all parts are in good condition.

1 Watch

1 Battery (pre-installed)

1 Set of instructions for use

2 Spare changeable links (HG08172B/C)

1 Repair set (HG08172B)

- Setting the time

1. To set the time, pull the crown 2 out to the 1st position 5.
2. Turn the crown 2 to set the hour and minute hands 4, 1.
3. When the crown 2 is pushed back to the normal position, the second hand 3 begins to run.

●Watertightness

This watch is watertight to 3 bar (HG08172D) and 5 bar (HG08172A/B/C/E) in accordance with DIN 8310. Figure B shows the permissible areas of use. Please note that watertightness is not a permanent feature. It should be checked annually and particularly before subjecting it to special conditions, as the function of the inbuilt sealing elements diminishes with daily use.

●Shortening the watch strap Model No. HG08172B

Note: The watch strap can be shortened by removing segments 6 (2 spare units are included). To this purpose you should use the repair set 7 supplied.

● Removing Segments (Fig. C)

Note: The segments which can be removed are marked with an arrow (see Fig. C). They are connected together with pins. These can be pushed out in the direction of the arrow with the repair set 7. Use a pair of tweezers if necessary in order to remove the pins.

Place the watch with the dial facing downwards in the repair set 7. ■ Remove the pins of the segment that you wish to remove (as described above) and take out the segment 6.

Note: If you would like to take out more than one consecutive segment 6, it is sufficient to remove the two outer pins.

■ Connect the watch strap together again by joining the loose segments 6 with a pin. Press this pin against the direction of the arrow into the adjacent segments 6.

● How to exchange the pin inside the slider (Fig. D, E, F)

Take out the slide open the bottom cover 10 with the spare pin 9 inside.

- You will need pliers to carefully remove the old pin from the slider.

- Insert the spare pin carefully into the slider by again using the pliers. The new pin is installed.

● Shortening the watch strap (HG08172C) (Fig. G)

■ To shorten the watch strap, 2 removable segments are included. - Open the fastener of the watch strap and fastener 11 of the removable segment.

■ Remove 1 or segments and re-close the fastener of the watch strap.

● Cleaning and maintenance

- Clean the product on the outside only with a soft, dry cloth.

●Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1 – 7: plastics / 20 – 22: paper and fibreboard / 80 – 98: composite materials

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

Faulty or used batteries / rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and its amendments. Please return the batteries / rechargeable batteries and / or the product to the available collection points.

Environmental damage through incorrect disposal of the batteries / rechargeable batteries!

Batteries / rechargeable batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used batteries / rechargeable batteries at a local collection point.

●Warranty and service

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase.

Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

The warranty further excludes a reduction in water tightness. The state of water tightness is not a permanent property and should therefore be regularly maintained. Please note, opening and repairs performed by unauthorized individuals will void any warranty.

●Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

Please have the till receipt and the item number (e.g. IAN 123456_7890) available as proof of purchase.

You will find the item number on the rating plate, an engraving, on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.

You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

CE

Introduction.... Page 17

E-mail address: [e-mail]

Introduction.... Page 62