IAN 270628 - Weather Station AURIOL - Free user manual and instructions

Product Type	Wireless Weather Station with Outdoor Sensor
Model Number	IAN 270628
Brand	Auriol
Indoor Unit Dimensions	Approx. 150 x 80 x 20 mm
Outdoor Sensor Dimensions	Approx. 60 x 40 x 20 mm
Weight	Approx. 200 g (indoor unit)
Power Supply Indoor Unit	2 x AAA batteries (not included)
Power Supply Outdoor Sensor	2 x AAA batteries (not included)
Radio-Controlled Clock	DCF-77 signal (reception range up to 1500 km)
Indoor Temperature Range	0°C to +50°C
Outdoor Temperature Range	-20°C to +50°C
Humidity Measurement	20% to 99% relative humidity
Barometric Pressure	Displayed with trend indicator
Weather Forecast	Icon-based (sunny, partly cloudy, rainy, etc.)
Wireless Transmission Frequency	433 MHz
Maximum Range	Up to 100 meters (open field)
Alarm Function	Daily alarm with snooze
Backlight	Yes (activate via button)
Display	LCD with time, date, indoor/outdoor temp, humidity, pressure, forecast
Maintenance & Cleaning	Clean with a soft, dry cloth. Do not use solvents or abrasive cleaners.
Safety Instructions	Keep away from moisture and extreme heat. Batteries should be removed if unused for long periods. Keep out of reach of children.
Spare Parts & Repairability	Batteries (standard AAA). Outdoor sensor available as spare part. Do not attempt to repair yourself; contact service center.
General Information	Model: IAN 270628. Brand: Auriol. Use only indoors. Dispose of batteries properly.

Frequently Asked Questions - IAN 270628 AURIOL

How do I set the time manually if the radio signal is weak?

Press and hold the SET button for 3 seconds. Use the UP and DOWN buttons to adjust the hour, minute, year, month, and day. Press SET to confirm each step.

What should I do if the outdoor sensor is not connecting?

Ensure both the indoor unit and outdoor sensor have fresh batteries. Place the sensor within 30 meters of the indoor unit. Press the CH button on the indoor unit to force a resync. Avoid metal obstacles.

How do I switch between Celsius and Fahrenheit?

Press and hold the °C/°F button for 2 seconds. The display will toggle between Celsius and Fahrenheit.

Why is the weather forecast not accurate?

The forecast is based on barometric pressure trends. Allow the station to run for at least 12 hours after setup for calibration. Rapid pressure changes may cause temporary inaccuracies.

How do I replace the batteries?

Open the battery compartment on the back of each unit. Insert 2 new AAA batteries observing polarity. Close the compartment. The display will update automatically.

Can I use rechargeable batteries?

Yes, but note that rechargeable batteries typically have a lower voltage (1.2V) which may reduce performance and battery life. Standard alkaline batteries are recommended.

What does the 'snooze' function do?

When the alarm sounds, press the SNOOZE/LIGHT button to silence it for 5 minutes. The alarm will repeat unless turned off by pressing the ALARM button.

How do I reset the weather station to factory defaults?

Remove all batteries from both the indoor unit and outdoor sensor. Wait 30 seconds. Reinsert batteries into the sensor first, then the indoor unit. Press the RESET button on the indoor unit with a pin.

What is the maximum outdoor temperature it can measure?

The outdoor sensor measures from -20°C to +50°C (-4°F to +122°F). Exposing it to temperatures outside this range may damage the sensor.

How do I clean the weather station?

Use a soft, dry cloth to gently wipe the display and housing. Do not use any liquids, cleaning agents, or abrasive materials.

USER MANUAL IAN 270628 AURIOL

RADIO-CONTROLLED WEATHER STATION · 11/2015 · Art.-Nr.: 4-LD4126

RADIO-CONTROLLED WEATHER STATION

Usage and safety instructions

RADIO-CONTROLLED WEATHER STATION

GB Usage and safety instructions

Table of contents

Table of contents .... - 1 -

Introduction - 2 -

Intended use .... 2 -

Scope of delivery 2 -

Specifications .... - 2 -

Weather station 2 -

Outdoor sensor .... 2 -

Important safety information important safety information 2 -

Set up the device safely .... 2 -

User 2

Batteries....2-

Display....-3-

Control panel....3-

Outdoor sensor....-4-

Setup....5-

Reception problems....-5-

Restarting radio signal reception....5-

Light....5-

12/24-hour time format....-5-

Temperature unit....5-

Speed setting 5-

Basic settings....5-

Location table -6-

Sunrise, sunset, moonrise and moonset times....-6-

Moon phase....-6-

Alarm....7-

Snooze....-7-

Weather forecast....-7-

Barometer....-7-

12-hour air pressure history....7.

Outdoor sensor/channel setting....-8-

Outdoor temperature tendency 8-

Indoor humidity....8-

Maximum and minimum values 8-

Battery level indicator 8-

Restart (RESET)....8-

Cleaning instructions....-8-

Declaration of conformity....8-

Disposal of the electronic appliance....-8-

Disposal of the batteries....9-

digi-tech gmbh warranty 9 -

Warranty conditions ....- 9 -

Warranty period and defects liability....9 -

Scope of the warranty....9-

Warranty claim procedure....-9 -

Service - 10 -

Supplier - 10 -

RADIO-CONTROLLED WEATHER STATION

Introduction

Congratulations on the purchase of your new weather station. You have chosen a high quality product. The instruction manual is part of the product- it contains important information about safety, use and disposal. Read the manual with all usage and safety notes before using the watch. Only use the watch in the intended way and for the intended applications.

If the weather station is given to someone else, include all documentation with the heart rate watch with chest belt.

Intended use

This electronic appliance is intended for time display and the described additional features. Any other use or modification of the electronic appliance does not comply with the intended uses. The manufacturer is not liable for damages caused by improper use or misuse. The device is not intended for commercial use.

Scope of delivery

Please note: Check the scope of delivery after purchase. Please ensure that all parts are included and undamaged.

• Weather station • 3 x battery 1.5 V AA R6/LR6
• Outdoor sensor • 2 x battery 1.5 V AA R6/LR6
• Instruction manual

Specifications

Weather station

• Operating temperature 0-50°C • Battery: 3 x 1.5 V AA R6 / LR6 • Temperature display: +/- 1 °C

Outdoor sensor

• Operating Temperature -20 - 50°C • Battery: 2 x 1.5 V AA R6 / LR6 • Temperature display: +/- 1 °C
• Range: max. 100 m

Important safety information

Set up the device safely

The weather station with outdoor sensor is not designed for operation in rooms with high humidity (i.e. bathroom). Make sure that:

• sufficient ventilation is always guaranteed (don't place the device on shelves or where curtains or furniture block the ventilation holes, and ensure that there are at least 10 cm of space on all sides);
• the device isn't placed on a thick carpet or bed during operation;
• No direct heat sources (i.e. radiators) influence the device;
• No direct sunlight reaches the device;
• Contact with splashing or dripping water must be avoided (don't place any items filled with liquids, i.e. vases, onto or next to the device);
• The device doesn't stand near magnetic fields (i.e. speakers); candles and other open flames must be kept away from this product at all times to prevent the spread of fire.

User

This device may be used by persons (including children over 8 years of age) with reduced physical, sensory or mental abilities or lack of experience and knowledge, if they are supervised or instructed regarding the safe use of the device and understand the dangers that may arise. Children may not play with the device. Cleaning and user maintenance of the device may not be performed by children without supervision. Keep packaging films out of the hands of children. There is a danger of suffocation.

Batteries

Keep batteries out of reach of small children. If a battery is swallowed, you must seek medical attention immediately. Batteries/rechargeable batteries must always be inserted in the correct polarity. If necessary, clean the battery and device contacts. Never attempt to recharge non-rechargeable batteries. Never short-circuit or attempt to open batteries. Never throw batteries into fire as they may explode.

If the device will not be used for an extended time period, remove the battery and store the device in a dry and dust-free area. Improper use of the battery can lead to explosion or leakage. If the battery leaks, avoid contact with skin, eyes and mucous membranes. Use gloves. If you are exposed to battery acid, rinse the affected areas with plenty of clean water and immediately seek medical attention. Remove discharged batteries from the device as they present an increased risk of leakage.

Display

Control panel

Outdoor sensor

1 Weather icon 22 Selected channel
2 Air pressure bar	23 Battery indicator
3 Indoor temperature	24 Outdoor temperature
4 Comfort icon	25 Air pressure tendency
5 Indoor humidity 26 CHANNEL-button
6 Moon phase 27 HISTORY/WEATHER-button
7 Moonrise and Moonset 28 °C/°F + button
8 Location 29 MAX/MIN - -button
9 Sunrise and sunset 30 RELATIVE/ABSOLUTE-air pressure-button
10 ALARM-button 31 SUN/MOON-button
11 -/▲-button	32 Hole for wall mounting
12 SNOOZE/LIGHT-button 33 RESET-button
13 Alarm symbol 34 Battery compartment
14 +/12/24-button 35 Stand
15 MODE-button 36 LED indicator
16 Date (month, day, day of the week)	37 Outdoor temperature / channel
17 Time display	38 Hole for wall mounting
18 Radio control indicator	39 Channel selection switch
19 Air pressure for previous hours	40 Battery compartment
20 Relative / absolute air pressure	41 °C/°F-button
21 Outdoor temperature tendency	42 TX-button

Setup

Insert batteries into the outdoor sensor first and then insert batteries into the weather station.

Remove the protective film from the weather station and the outdoor sensor. Open the battery compartment of the outdoor sensor and insert the included batteries in the correct polarity. The LED indicator will briefly light up and the display will show the temperature. Close the battery compartment. Open the battery compartment of the weather station and insert the included batteries in the correct polarity. Close the battery compartment. The weather station will now receive the signal from the outdoor sensor. This process may take several minutes to complete. If reception is successful, the selected channel 22 and the current outdoor temperature 24 will appear. After successful reception of the signal for the outdoor sensor, the reception of the DCF77 time signal will begin and the radio control indicator 18 will blink on the display next to the time. All buttons except the SNOOZE / LIGHT button 12 are disabled during the reception process. If reception fails after 10 minutes, please set the time manually. The weather station will reattempt reception at 04:00 and 05:00 and, if reception is successful, will correct the set time.

Note: Please do not move the weather station or the sensor during the reception process.

If the reception attempt is successful, the radio control indicator 18 will appear permanently on the display and the correct time, date, day of the week and the times of sunrise, sunset, moonrise and moonset will be set automatically. DST will appear on the display next to the radio control indicator 18 during daylight saving time.

Reception problems

The DCF77 radio signal is transmitted from a location near Frankfurt am Main and can be received within a radius of approximately 1500 km around Frankfurt am Main. However, there are some obstacles and sources of interference, which may substantially hinder reception. If your weather station does not correctly receive the DCF77 radio signal, please hang or place the weather station in a different location at your site. Please note that devices such as computers, telephones, radios and televisions may cause electromagnetic radiation with can interfere with the DCF77 signal reception. Other possible detriments to reception are: strong building insulation (metal building materials), nearby mountains or atmospheric interference. It may also be necessary to replace the batteries.

Restarting radio signal reception

Manually restart the radio signal reception by pressing and holding the -/▲-button 11 for 3 seconds.

Light

Briefly activate the backlight by pressing the SNOOZE/LIGHT-button 12.

12/24-hour time format

Select the 12- or 24 hour time format by pressing the + / 12 / 24 -button 14. AM will appear on the display in the morning, PM in the afternoon if the 12-hour time format is selected.

Temperature unit

Select the temperature unit Celsius (°C) or Fahrenheit (°F) by pressing the °C/°F+ -button 28.

Speed setting

Press and hold buttons to use the speed setting feature when setting numerical values.

Basic settings

The following values can be set: time zone, time, date, language of the day of the week display, and location. Press and hold the MODE button 15 for 3 seconds while in normal time display mode. The time zone will blink and can be set by pressing the -/▲ button 11 or the +/12/24 button 14. Press the MODE button 15 to confirm your setting. Set the hours, minutes, seconds, year, month, day, language of the day of the week display (GE=German, FR=French, ES=Spanish, IT=Italian, NE=Dutch, DA=Danish, RU=Russian, EN=English), your country, and your city (see location table) in the same way. After changing the location, it will take some time for the weather station to update the times for sunrise, sunset, moonrise, and moonset.

Location table

Germany	GER	Ibiza	IBI	Glasgow	GLA	Eindhoven	EIN	Charleroi	CHA
Aachen	AAC	A Coruña	LAC	London	LON	Enschede	ENS	Liège	LIE
Berlin	BER	Leon	LEO	Manchester	MAN	Groningen	GRO	Switzerland/SWI
Düsseldorf	DUS	Las Palmas	LPA	Plymouth	PLY	The Hague	DHA	Liechtenstein
Dresden	DRE	Madrid	MAD	Hungary	HUN	Rotterdam	ROT	Basel	BAS
Erfurt	ERF	Malaga	MAL	Budapest	BUD	Portugal	POR	Bern	BER
Frankfurt	FRA	Palma de	PDM	Croatia	CRO	Evora	EVO	Chur	CHU
Flensburg	FLE	Mallorca		Zagreb	ZAG	Coimbra	COI	Geneva	GEN
Freiburg	FRE	Salamanca	SAL	Italy	ITA	Faro	FAR	Locarno	LOC
Hanover	HAN	Seville	SEV	Ancona	ANC	Leiria	LEI	Lucerne	LUC
Bremen	BRE	Valencia	VAL	Bari	BAI	Lisbon	LIS	St. Moritz	MOR
Hamburg	HAM	Zaragoza	ZAR	Bologna	BOL	Porto	POR	St. Gallen	GAL
Rostock	ROS	France	FRA	Cagliari	CAG	Poland	POL	Sion	SIO
Stralsund	STR	Besancon	BES	Catania	CAT	Gdańsk	GDA	Vaduz	VAD
Cologne	KOE	Biarritz	BIA	Florence	FIR	Kraków	KRA	Zürich	ZUE
Kiel	KIE	Bordeaux	BOR	Foggia	FOG	Poznań	POZ	Czech Republic	CZR
Kassel	KAS	Brest	BRE	Genoa	GEN	Szczecin	SZC
Leipzig	LEI	Cherbourg	CHE	Lecce	LEC	Warsaw	WAR	Prague	PRA
Munich	MUE	Lyon	LYO	Messina	MES	Russia	RUS	Greece	GR
Magdeburg	MAG	Marseille	MAR	Milan	MIL	St. Petersburg	PET	Athens	AT
Nuremberg	NUE	Monaco	MON	Naples	NAP	Sweden	SWE	Cyprus	CY
Regensburg	REG	Metz	MET	Palermo	PAL	Gothenburg	GOT	Nicosia	NI
Stuttgart	STU	Nantes	NAN	Parma	PAR	Stockholm	STO	Romania	RO
Saarbrücken	SAA	Nice	NIC	Perugia	PER	Slovakia	SLK	Bucharest	BU
Schwerin	SCH	Orléans	ORL	Rome	ROM	Bratislava	BRA	Bulgaria	BG
Denmark	DAN	Pairs	PAR	Turin	TOR	Slovenia	SLO	Sofia	SO
Albørg	ALB	Perpignan	PER	Trieste	TRI	Ljubljana	LUU
Arhus	ARH	Lille	LIL	Venice	VEN	Serbia	SRB
Copenhagen	COP	Rouen	ROU	Verona	VER	Belgrade	BER
Odense	ODE	Strasbourg	STR	Ventimiglia	VTG	Austria	AUS
Spain/Andorra	ESP	Toulouse	TOU	Ireland	IRL	Graz	GRA
		Finland	FIN	Dublin	DUB	Innsbruck	INN
Alicante	ALI	Helsinki	HEL	Luxemburg	LUX	Linz	LIN
Andorra	AND	Great Britain	GB	Norway	NOR	Salzburg	SAL
Badajoz	BAD	Aberdeen	ABD	Bergen	BER	Vienna	VIE
Barcelona	BAR	Belfast	BEL	Oslo	OSL	Belgium	BEL
Bilbao	BIL	Birmingham	BIR	Stavanger	STA	Antwerp	ANT
Cádiz	CAD	Bristol	BRI	Netherlands	NET	Bruges	BRU
Cordoba	COR	Edinburgh	EDI	Amsterdam	AMS	Brussels	BRL

Sunrise, sunset, moonrise, and moonset times

After setting your country and city, the weather station will calculate the approximate times for sunrise, sunset, moonrise, and moonset.

Note: The calculated times are approximate. Differences can also result from your local terrain and weather.

Briefly display the approximate number of hours of sunlight for the current day by pressing the SUN/MOON button 31. To view the information for a different location or date, press and hold the SUN/MOON button 31 for 3 seconds. The country will blink and can be selected by pressing the -/▲ button 11 or the +/12/24 button 14. Confirm your setting by pressing the SUN/MOON button 31. Set the city, year, month, and day in the same way and confirm your setting by pressing the SUN/MOON button 31.

Moon phase

Your weather station is equipped with a moon phase display. The 8 phases of the moon are:

New Moon

Waxing Crescent

First Quarter

Waxing Gibbous

Full Moon

Waning Gibbous

Third Quarter

Waning Crescent

Alarm

The weather station has 2 alarms, which can be set separately. Press the MODE button 15 to select alarm 1 or alarm 2. The corresponding alarm symbols will appear. When displaying alarm 1 or alarm 2, press and hold the MODE button 15 to enter setting mode. The hours will blink on the display. Set the hours by pressing the -/▲ button 11 or the +/12/24 button 14 and confirm your setting by pressing the MODE button 15. Set the minutes in the same way. Press the AL/ON/OFF button while displaying the alarm you wish to activate. Press the AL/ON/OFF button 10 to activate (on) or deactivate (oF) the alarm. If alarm 1 is activated, the symbol √ will appear. If alarm 2 is activated, the symbol √ will appear. If no button is pressed within 5 seconds, the weather station will return to normal time display mode.

Snooze

Press the SNOOZE/LIGHT button 12 to temporarily deactivate the alarm. The bell symbol will blink on the display. After 5 minutes, the alarm will sound again. Press the AL ON/OFF button 10 to shut off the alarm.

Weather forecast

The weather icons show a weather tendency for the next hours and not the current weather. Should the forecast of your weather station be incorrect, you can adjust the display by pressing and holding the HISTORY/WEATHER button 27 for 3 seconds. The weather icon will blink. You can now select the correct weather icon by pressing the °C/°F + button 28 or the MAX/MIN - button 29. Confirm your selection by pressing the HISTORY/WEATHER button 27.

Note: The weather station will start the forecast approximately 6 hours after the current weather was entered.

Sunny

Slightly cloudy

Cloudy

Downpour

Rain

Barometer

Your weather station can show the air pressure tendency 25.

Air pressure rising

Air pressure constant

Air pressure falling

You can also select absolute or relative air pressure by pressing the Relative/Absolute-button 30. Rel. or Abs. will appear on the display.

Note: The weather station measures the absolute air pressure. Your local weather service can supply you with the relative air pressure for your location, which you can input into the weather station.

To change the relative air pressure, press and hold the Relative/Absolute-button 30 for 3 seconds. The air pressure value will blink on the display and can be set by pressing the °C/°F + -button 28 or MAX/MIN-button 29. Confirm your setting by pressing the Relative/Absolute-button 30.

12-hour air pressure history

Press the HISTORY/WEATHER-button 27 to view the air pressure history for the last 12 hours.

0 - HR = current air pressure

- 1 HR = air pressure 1 hour ago

-2 HR = air pressure 2 hours ago... and so on

Outdoor sensor/channel setting

You can use the weather station with up to 3 outdoor sensors at the same time. Open the battery compartment of the outdoor sensor and select a channel (1-3) by using the channel switch 39. Press and hold the CHANNEL-button 26 for 3 seconds or until an audible signal sounds. The weather station will now attempt to receive the signal. Now press the TX-button 42 to manually transmit the temperature from the outdoor sensor to the weather station. Close the battery compartment. Press the °C/°F-button 41 to select °C-Celsius or °F-Fahrenheit.

Note: The outdoor sensor must be within a maximum distance of 100 m of the weather station with no obstructions.

If you are using multiple outdoor sensors: Press the CHANNEL-button 26 to select the reception channel. The rotation symbol \(\mathbf{U}\) on the display at 22 indicates that the weather station is rotating through channels 1-3. Only active outdoor sensors are displayed. Press and hold the CHANNEL-button 26 to remove unused channels. When adding an additional outdoor sensor, the weather station will detect it automatically. You can also manually transmit the signal by pressing the TX-button 42.

Outdoor temperature tendency

The temperature trend 21 is displayed upon successful reception from the outdoor sensor.

Outdoor temperature rising

Outdoor temperature constant

Outdoor temperature falling

Indoor humidity

The current indoor humidity is shown on the display at 5. The comfort icon 4 can show 3 levels of comfort:

DRY

Humidity 5; < 45 %

COMFORT

Humidity 5; 45 – 75 %; Indoor temperature 3; 24 – 27,9 °C

HUMID

Humidity 5; >75 %

Maximum and minimum values

The maximum and minimum temperature and humidity are stored as soon as the batteries are inserted. Briefly press the MAX/MIN button 29 to display the maximum MAX, minimum MIN, and current indoor temperature 3, outdoor temperature 24, and humidity 5 on the display. To delete the maximum and minimum values, press and hold the MAX/MIN button 29 for 3 seconds. An audible signal will sound and the stored values will be deleted. The weather station will immediately restart recording of the values.

Battery level indicator

If the batteries run too low to power the weather station, the outdoor sensor, and signal transmission, the battery level indicator 23 will appear on the display. Replace the batteries in all devices as soon as possible. Restart the weather station.

Restart (RESET)

Press the RESET button 33 within the battery compartment to reset the weather station.

Cleaning instructions

Clean the product with a soft, dry, and lint-free cloth. A glasses cleaning cloth is ideal.

Declaration of conformity

If used as intended, this product conforms to the basic standards of § 3 and the other relevant provisions of the FTEG (Section 3 of the R&TTE directive).

The declaration of conformity can be requested here: [e-mail]

Disposal of the electronic appliance

This weather station may not be disposed of with normal household waste. Dispose of the unit at an approved disposal facility or at your local recycling centre. Please observe the current rules and regulations when disposing of the appliance. Contact the disposal system if in doubt.

GB

Disposal of the batteries

Please dispose of your batteries properly in containers especially set up at retailers. Batteries do not belong in household waste. Dispose of the batteries at an approved disposal facility or at your local recycling centre. Contact the disposal system if in doubt.

digi-tech gmbh warranty

This weather station includes a 3 year warranty starting on the day of purchase. In case of defects of this weather station you have, by law, certain rights regarding the vendor of the weather station. These rights are not changed by the warranty which is described in the following paragraphs.

Warranty conditions

The warranty duration starts on the date of purchase. Please keep the receipt in a safe place. The receipt is needed as a proof of purchase. If a defect occurs in the weather station within 3 years, the weather station will be repaired or replaced (according to our choice) free of charge. This warranty requires that, within the 3 year warranty period, the weather station and the receipt can be made available to us along with a short written description of the defect and when it occurred. If the defect is covered by the warranty, you will receive the repaired weather station or a new weather station. Repair or replacement does not cause the warranty period to restart.

Warranty period and defects liability

The warranty period is not increased by the defect liability. This also applies to repaired or replaced parts. If defects are noticed at the time of purchase they must be reported immediately upon unpacking the item. Paid repair may be available after the end of the warranty period.

Scope of the warranty

The weather station was manufactured according to strict quality guidelines and was carefully inspected before delivery. The warranty does not include parts that experience normal wear and tear and can thus be seen as wear parts or fragile parts that are damaged. Examples include Switches, Batteries or parts made of glass.

This warranty becomes void if the weather station is damaged, is not used in the recommended way or is improperly repaired.

For proper use of the weather station all instructions in this manual must be adhered to exactly. Use of the weather station in a way that is discouraged in the manual must be avoided.

The weather station not intended for commercial use. Abusive or improper use, excessive force and changes that are made by non-authorized repair centers will void the warranty.

Warranty claim procedure

To ensure that your call is processed in a fast and efficient manner, please note the following directions:

- Have your receipt (as proof of purchase) and the article number (270628) handy.

- The article number can be found on the type label, an engraving, the front page of the manual (bottom left), or a sticker on the back side or bottom side of the case.

- In case defects occur, please first contact the service center (see below) by phone or email.

Visit www.lidl-service.com to download this and many other manuals, product videos, and software.

Service

Please note that the following address is not a service address.

Please first contact the service address (see above).

Name: digi-tech gmbh

Street: Valterweg 27A

Town: Eppstein 65817

Country: Germany