IAN 311269 - Alarm Clock AURIOL - Free user manual and instructions

Product Type	Alarm clock radio
Brand	Auriol
Model	IAN 311269
Power Supply	AC mains adapter (included) or 3 x AAA batteries (not included)
Radio Bands	FM (87.5-108 MHz) and AM (522-1620 kHz)
Display Type	LED digital display with adjustable brightness
Alarm Features	Dual alarms with wake-up to radio or buzzer, snooze function (9 minutes)
Dimensions (approx.)	18 x 12 x 7 cm (W x D x H)
Weight (approx.)	350 g (without batteries)
Backup Memory	Preserves time and alarm settings during power outage
Sleep Timer	Set radio to play for 15, 30, 60, or 90 minutes
Volume Control	Rotary dial for separate radio and alarm volume
Headphone Jack	3.5 mm stereo output for private listening
SNOOZE Button	Large top button for easy access
Cleaning	Wipe with soft, dry cloth; do not use liquids or abrasives
Safety	Do not expose to water, extreme temperatures, or direct sunlight
Spare Parts	Contact Auriol customer service for replacement adapters or batteries
Manual Languages	Available in multiple languages including English, German, French
Guarantee	3-year manufacturer's warranty against defects

Frequently Asked Questions - IAN 311269 AURIOL

How do I set the alarm?

Press the ALARM SET button until the alarm icon flashes. Use the HOUR and MIN buttons to set the desired time. Press ALARM SET again to confirm. Ensure the alarm selector is set to either radio or buzzer.

Why is the radio not receiving stations?

Check that the antenna is fully extended. For FM, the antenna is built-in; reposition the unit for better reception. For AM, the internal ferrite bar is directional; rotate the whole unit. Also, try scanning manually or automatically.

How do I change the time?

Press and hold the TIME SET button for about 3 seconds until the hour digits flash. Press HOUR or MIN to adjust. Press TIME SET again to save.

What type of batteries does the backup use?

The clock uses 3 x AAA batteries (alkaline recommended) for memory backup. They are not included. Insert them in the compartment on the bottom of the unit.

How do I activate the snooze function?

When the alarm sounds, press the SNOOZE button (top of the unit). The alarm will stop and sound again after 9 minutes. You can snooze multiple times.

Can I use the alarm without batteries?

The clock requires AC power to operate. Batteries only preserve time and alarm settings during a power outage; they do not power the radio or alarm sound.

How do I adjust the display brightness?

Press the DIMMER button repeatedly to cycle through brightness levels (usually high, medium, low, off). The setting is stored.

What should I do if the buttons are unresponsive?

First, try unplugging the AC adapter and removing batteries for 30 seconds to reset the unit. If that fails, check for blockage or contact customer support.

Is there a sleep timer?

Yes, press the SLEEP button repeatedly to set 15, 30, 60, or 90 minutes. The radio will turn off automatically after the selected time.

How do I clean the radio clock?

Unplug the unit and wipe the exterior with a soft, dry cloth. Do not use any liquid cleaners, abrasive materials, or spray directly onto the device.

USER MANUAL IAN 311269 AURIOL

Usage and safety instructions

SMART ALARM CLOCK LCD

GB Usage and safety instructions - 1 -

Usage and safety instructions

Table of contents

Table of contents....- 1 -

Preliminary note....-2-

Intended use -2-

Scope of delivery....-2-

Technical specifications.... - 2 -

Important safety information important safety information.... - 2 -

Important safety information for users....-2-

Important safety information for the batteries....-2-

Set up the alarm clock safely....-3-

Display and controls....-3

Setup -3

Time zone adjustment.... - 4

Restart....-4

Activating/ deactivating radio signal reception ....- 4

Reception problems.... - 4

Light -4

Temperature display....-5

Speed setting....-5

Basic settings.... - 5

Alarm....-5

Activating and deactivating the alarms - 5

Snooze....-5

Cleaning instructions....-5

Simplified EU declaration of conformity - 6

Disposal of the electronic appliance

Disposal of the batteries

Recycling

Cardboard

Waste disposal

digi-tech gmbh warranty

Warranty conditions

Warranty period and defects liability

Scope of the warranty

Warranty claim procedure

Service

Supplier

LCD ALARM CLOCK

Preliminary note

Congratulations on the purchase of your new alarm clock. You have chosen a high quality appliance. The manual is part of the appliance. It contains important safety, usage and disposal information. Please read all usage and safety instructions before using the appliance. Please only use the appliance as described and for the described uses. If you sell or give this alarm clock to someone else it is very important to also include this manual. Please keep the packaging and the instruction manual for future reference.

Intended use

This electronic device is intended for time display and the described additional features. Any other use or modification of the electronic device does not comply with the intended uses. The manufacturer is not liable for damages caused by improper use or misuse. The device is not intended for commercial use.

Scope of delivery

Please note: Check the scope of delivery after purchase. Please ensure that all parts are included and undamaged.

• 1 x Alarm clock
• 1 x Battery 1,5 V AA R6/LR6 • 1 x Instruction manual

Technical specifications

• Quartz movement • Measuring range (inside): -10°C -50°C
• Operates with 1,5 V AA R6/LR6 battery
• Symbol for direct current

Important safety information

Important safety information for users

WARNING! RISK OF INJURY!

This device may be used by persons (including children over 8 years of age) with reduced physical, sensory or mental abilities or lack of experience and knowledge, if they are supervised or instructed regarding the safe use of the device and understand the dangers that may arise. Children may not play with the device. Cleaning and user maintenance of the device may not be performed by children without supervision. Keep packaging films out of the hands of children. There is a danger of suffocation.

Important safety information for the batteries

WARNING!

HEALTH HAZARD!

RISK OF EXPLOSION!

Keep batteries out of reach of small children. If a battery is swallowed, you must seek medical attention immediately. Batteries/rechargeable batteries must always be inserted in the correct polarity. If necessary, clean the battery and device contacts. Never attempt to recharge non-rechargeable batteries. Never short-circuit or attempt to open batteries. Never throw batteries into fire as they may explode.

If the device will not be used for an extended time period, remove the battery and store the device in a dry and dust-free area. Improper use of the battery can lead to explosion or leakage.

If the battery leaks, avoid contact with skin, eyes and mucous membranes. Use gloves. If you are exposed to battery acid, rinse the affected areas with plenty of clean water and immediately seek medical attention. Remove discharged batteries from the device as they present an increased risk of leakage.

Set up the alarm clock safely

The alarm clock is not intended for use in rooms with high humidity (example: bath room). Make sure that:

• the device isn't placed on a thick carpet or bed during operation;
• no direct heat sources (i.e. radiators) influence the device;
• no direct sunlight reaches the device;
• Contact with splashing or dripping water must be avoided (do not place any items filled with liquids, such as vases, onto or next to the device);
• The device should not be placed near magnetic fields (e.g., speakers);
• Candles and other open flames must be kept away from this product at all times to prevent the spread of fire.
• No foreign objects should penetrate the housing.

Display and controls

1	Display	14	SET / °C / °F
2	SNOOZE / LIGHT	15	ALARM / SET
3	Time	16	RCC / RESET
4	Seconds	17	▲/ ALARM ON / OFF
5	Radio tower indicator / DST	18	▼/ RCC OFF
6	Temperature indicator	19	Battery compartment
7	Day of the week indicator	20
8	Date indicator, D=day, M=month
9	Alarm 2 (6 - 7)
10	Alarm 1 (1 - 5)
11	Alarm time
12	Snooze indicator
13	12/24 hour time format

Setup

Remove the protective film from the display of the alarm clock. Open the battery compartment 19 on the backside of the device and insert a 1.5 V AA R6/LR6 battery in the correct polarity. Close the battery compartment 19.

Radio time signal reception starts automatically after inserting the battery, and the alarm clock will beep once. The radio tower indicator 5 will blink on the display. This process can take 3-10 minutes.

Note: Please do not move the alarm clock during the reception process.

The alarm clock synchronizes the internal clock every day from 01:00 to 04:00 on each full hour. If reception is unsuccessful, the clock will reattempt reception at 05:00 and 06:00. Please set the time manually if reception fails (see "Basic settings").

If reception is successful, the radio tower indicator ✦ 5 appears permanently on the display, and the time, date, and day of the week are set automatically. During daylight saving time, DST appears on the display next to the radio tower indicator.

Time zone adjustment

If you are in a country where the current time is incorrect even though the DCF77 signal was received, please use the time zone adjustment to adjust the time zone to a different setting than the standard setting (UTC+1 = Central European Time). Set the difference in hours (for example -0.1) to the required time zone.

Press and hold SET / °C / °F 14 for 3 seconds in normal time display mode. The language of the day of the week will blink. Press SET / °C / °F 14 8 times. Now the time zone will blink (00) and can be set using ▲ ALARM ON / OFF 17 or

▼ / RCC OFF 18.

Confirm your setting by pressing SET / °C / °F 14.

Now perform a restart. The clock will continue to receive the DCF-77 radio control signal but will show the changed time (for example, 1 hour less).

Restart

Radio reception can be manually restarted by pressing RCC / RESET 16 on the backside of the clock for 4 seconds. The radio tower ✦ 5 will blink on the display. This process can take from 3 to 10 minutes.

If radio reception fails, the time must be set manually (see basic settings).

Activating/ deactivating radio signal reception

Radio signal reception can be deactivated manually by pressing ▼ / RCC OFF 18 on the backside of the clock for 4 seconds. The radio

tower 🚗 will disappear from the display. Press for 2 seconds

▼ / RCC OFF 18 again. The radio waves will disappear from the display. The clock will now no longer receive the radio signal. Set the time manually as described in basic settings.

Radio signal reception can be restarted by pressing RCC / RESET 16 on the backside of the clock for 4 seconds. The radio tower ✦5 will blink on the display. This process can take from 3 to 10 minutes.

If radio reception fails, the time must be set manually (see basic settings).

Reception problems

The DCF77 radio signal is transmitted from a location near Frankfurt am Main and can be received within a radius of approximately 1500 km around Frankfurt am Main. However, there are some obstacles and sources of interference, which may substantially hinder reception. If your alarm clock does not correctly receive the DCF77 radio signal, please hang or place the alarm clock a different location at your site. Please note that devices such as computers, telephones, radios and televisions may cause electromagnetic radiation which can interfere with the DCF77 signal reception. Other possible detriments to reception are: strong building insulation (metal building materials), nearby mountains or atmospheric interference. It may also be necessary to replace the batteries.

Light

Press SNOOZE / LIGHT 2 on the top of the clock to briefly activate the light.

Temperature display

Press SET / °C / °F 14 to select the temperature unit Celsius (°C) or Fahrenheit (°F).

Speed setting

When setting numerical settings, press and hold the relevant button to use the speed setting feature.

Basic settings

The following settings are possible: Language of the day of the week, 12/24 hour time format, year, date format (M=month, D=day), month, day, hours, minutes and time zone. Press and hold SET / °C / °F 14 in normal time display mode for 3 seconds. The language of the day of the week will blink on the display and can be set using

▲/ ALARM ON / OFF 17 or ▼ RCC OFF 18. The following languages are available: GE=German, EN=English, IT=Italian, FR=French, DU=Dutch, SP=Spanish, HU=Hungarian, SL=Slovenian. Press SET / °C / °F 14 to confirm your setting. Set the 12/24 hour time format, the year, the date format (M=month, D=day), the month, the day, the hours, the minutes and the time zone in the same way.

Alarm

2 different and separate alarm times are available for setting.

Alarm 1 (1 - 5) for the days Monday to Friday.

Alarm 2 (6 - 7) for Saturday and Sunday.

Press and hold ALARM / SET 15 to enter alarm time setting mode. The hours of alarm 1 (1 - 5) will blink on the display. Press ▲/ ALARM ON / OFF 17 ▼/ RCC OFF 18 to adjust the setting and press ALARM / SET 15 to confirm your setting. Set the minutes and the alarm time of the second alarm (6 - 7) in the same way.

Activating and deactivating the alarms

Press ▲ ALARM ON / OFF 17 in normal time display mode

1 time to activate Alarm 1 (1-5) 10 and

2 times to activate Alarm 2 (6-7) 9,

3 times to activate both alarms.

Press ALARM / SET 15 to switch between the alarm time displays of Alarm 1 (1-5) and 2 (6-7).

4 times to deactivate both alarms.

When the alarm is activated, the bell symbol will appear. The alarm will sound at the set time and will increase in frequency 3 times every 10 seconds. If the alarm is not switched off, it will switch off automatically after 3 minutes.

Snooze

Press SNOOZE / LIGHT 2 on the top of the case when the alarm sounds. The light will briefly turn on and Z 12 and the bell symbol blink on the display. The alarm will be turned off temporarily and will sound again after around 8 minutes.

Cleaning instructions

Clean the alarm clock with a soft, dry and lint-free cloth. A glasses cleaning cloth is ideal.

Simplified EU declaration of conformity

Hereby, digi-tech gmbh declares that the radio equipment type 4-LD5079 is in compliance with Directive RED 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.digi-tech-gmbh.com/ce/311269_WE.pdf

Disposal of the electronic appliance

This alarm clock may not be disposed of with normal household waste. Dispose of the alarm clock at an approved disposal facility or at your local recycling centre. Please observe the current rules and regulations when disposing of the appliance. Contact the disposal system if in doubt.

Disposal of the batteries

Please dispose of your batteries properly in containers especially set up at retailers. Batteries do not belong in household waste. Dispose of the batteries at an approved disposal facility or at your local recycling centre. Contact the disposal system if in doubt.

Recycling

The product packaging consists of recyclable materials. Dispose of the packaging in an environmentally sound manner using the proper collection systems.

Cardboard

The packaging is made from cardboard.

Waste disposal

Dispose of the packaging in an environmentally sound manner.

digi-tech gmbh warranty

This alarm clock includes a 3 year warranty starting on the day of purchase. In case of defects of this alarm clock you have, by law, certain rights regarding the vendor of the alarm clock. These rights are not changed by the warranty which is described in the following paragraphs.

Warranty conditions

The warranty duration starts on the date of purchase. Please keep the original receipt in a safe place. The receipt is needed as a proof of purchase. If a defect occurs in the alarm clock within 3 years, the alarm clock will be repaired or replaced (according to our choice) free of charge. This warranty requires that, within the 3 year warranty period, the alarm clock and the receipt can be made available to us along with a short written description of the defect and when it occurred. If the defect is covered by the warranty, you will receive the repaired alarm clock or a new alarm clock. Repair or replacement does not cause the warranty period to restart.

Warranty period and defects liability

The warranty period is not increased by the defect liability. This also applies to repaired or replaced parts. If defects are noticed at the time of purchase they must be reported immediately upon unpacking the item. Paid repair may be available after the end of the warranty period.

Scope of the warranty

The alarm clock was manufactured according to strict quality guidelines and was carefully inspected before delivery. The warranty does not include parts that experience normal wear and tear and can thus be seen as wear parts or fragile parts that are damaged. Examples include switches, batteries, or parts made of glass. This warranty becomes void if the alarm clock is damaged, is not used in the recommended way, or is improperly repaired. For proper use of the alarm clock, all instructions in this manual must be adhered to exactly. Use of the alarm clock in a way that is discouraged in the manual

must be avoided. The alarm clock is not intended for commercial use. Abusive or improper use, excessive force, and changes that are made by non-authorized repair centers will void the warranty.

Warranty claim procedure

To ensure that your call is processed in a fast and efficient manner, please note the following directions:

• Have your receipt (as proof of purchase) and the article number (IAN 311269) handy.
• The article number can be found on the type label, an engraving, the front page of the manual (bottom left), or a sticker on the backside or bottom side of the case.
• In case defects occur, please first contact the service centre (see below) by phone or email.

Visit www.lidl-service.com to download this and many other manuals, product videos, and software.

Service

Please note that the following address is not a service address.

Please first contact the service address (see above).

Name: digi-tech gmbh

Street: Valterweg 27A

Town: DE-65817 Eppstein

Country: GERMANY