Q: How to fully fold the ABC DESIGN Mint stroller when the upper part remains stuck?

Folding the Mint requires a specific step on the seat release handle , which must be activated before folding the upper part. Correct procedure: Pull the seat release handle upwards firmly until it clicks into place Once the handle is fully released, you can then fold the chassis and the upper part of the stroller If the upper part still remains stuck after this operation: Check that the safety harness is not caught on one side Ensure that the removable canopy is not obstructing the folding Make sure that the footrest is in the initial position (not stuck) Try gently rocking the stroller back and forth before fully folding it, this may release a tension point If the problem persists despite these checks, it may be that a part of the chassis is slightly misaligned and requires a physical inspection of the frame.

Question 1

The stroller is stuck in the driving position and refuses to fold

Accepted Answer

If your ABC Design Mint stroller refuses to fold, several locks must be released before folding. Here is the complete procedure to unlock the mechanism:

Essential unlocking steps:

Check that the 5-point harness is fully open by pressing the two buttons located on the sides and spread all anchor points to completely free the child
Ensure that the backrest is not locked in the reclined position - to straighten or adjust it, push the buttons on both sides of the adjustment mechanism inward and pull the backrest towards you
Check that the footrest is fully retracted - if it is in the low position, press the buttons on both sides, bring it up, then release to click it into place
Make sure that the front wheels are not locked - push the front wheel lever to the left to allow them to swivel

Unlocking and folding the mechanism:

Locate the seat unlock handle (usually located on the right side of the chassis)
Pull this handle upwards until you feel the click of the folding mechanism unlocking
Once unlocked, you can then fold the stroller by bringing it together for the compact position

Additional checks: The parking brakes must be loosened (lever up) to facilitate folding. Also check that no object is stuck between the chassis and the seat. If after these steps the stroller still resists, an element may be physically stuck or a folding mechanism damaged - contact ABC Design service for assistance.

Question 2

How to fully fold the ABC DESIGN Mint stroller when the upper part remains stuck?

Accepted Answer

Folding the Mint requires a specific step on the seat release handle, which must be activated before folding the upper part.

Correct procedure:

Pull the seat release handle upwards firmly until it clicks into place
Once the handle is fully released, you can then fold the chassis and the upper part of the stroller

If the upper part still remains stuck after this operation:

Check that the safety harness is not caught on one side
Ensure that the removable canopy is not obstructing the folding
Make sure that the footrest is in the initial position (not stuck)
Try gently rocking the stroller back and forth before fully folding it, this may release a tension point

If the problem persists despite these checks, it may be that a part of the chassis is slightly misaligned and requires a physical inspection of the frame.

Question 3

Can the chassis of the ABC DESIGN SALSA 4 AIR stroller be washed directly under water?

Accepted Answer

It is not recommended to wash the chassis directly under a water jet. According to the manufacturer's recommendations from ABC DESIGN, you should use gentle means to preserve the internal mechanisms and varnished parts.

Recommended method for cleaning the chassis:

Use a sponge, soft brush, or cloth dampened with warm water
Apply the damp cloth directly to the surfaces to be cleaned rather than rinsing under water
If necessary, add a very mild detergent or non-aggressive soap
Wipe carefully with a dry cloth after cleaning

The moving and mechanical parts (wheels, brakes, handle adjustment mechanism) should be cleaned regularly with the same gentle means (sponges, soft brushes, warm water). After cleaning, they can be oiled with a silicone-free oil to maintain their proper functioning.

Regarding the varnished parts of the chassis, regular maintenance is crucial for their durability. In case of stains or significant dirt, clean the varnished surface immediately.

For the fabric covers: they are washable by hand or machine on a cold wash program with a detergent for delicate fabrics. Be sure to dry the fabrics well after washing to avoid mold formation.

By avoiding direct water jets and favoring regular maintenance with gentle means, you will preserve the structure, mechanisms, and appearance of your SALSA 4 AIR.

Question 4

Why do the front wheels of the ABC DESIGN SALSA 4 AIR stroller get stuck?

Accepted Answer

The ABC Design Salsa 4 Air stroller is equipped with swivel and lockable front wheels. These wheels can be intentionally locked (thanks to a locking mechanism) to improve stability on uneven terrain, but unintentional locking can occur. Here are the main causes and how to resolve them.

Airless wheels: regular maintenance is essential — The wheels of the Salsa 4 Air are airless with an integrated ball suspension. Although durable, they require regular cleaning and lubrication to prevent seizing. The manual recommends cleaning and oiling the moving and mechanical parts (wheels, brakes, handle adjustment mechanism) at regular intervals.

Swivel wheel locking mechanism — The Salsa 4 Air has a system that allows for the intentional locking of the front wheels. This locking can be activated (fixed wheels) or deactivated (free and swivel wheels). If you find that the wheels are not turning, first check if this mechanism is accidentally locked.

Causes of unintentional locking — If the wheels get stuck despite a supposedly unlocked mechanism, there can be multiple reasons: accumulation of debris (dust, pebbles, leaves) around the rotation axis, lack of lubrication causing seizing, or deterioration of parts due to impacts or heavy wear.

Cleaning and lubrication procedure — Regularly clean the wheels using gentle means (sponges, soft brushes, warm water), focusing on the rotation axis and the joints of the locking mechanism. For lubrication, use only silicone-free oils (as indicated in the manual). Apply lightly to the rotation axes and rotate the wheels several times to evenly distribute the lubricant.

Mechanical inspection — Visually inspect the wheels for cracks, deformations, or broken parts that could hinder rotation. Also, ensure that the wheel mounting is correct and that the ball suspension system is undamaged.

Regular maintenance significantly contributes to the safety and longevity of your stroller. If the locking persists after cleaning and lubrication, it is recommended to contact your retailer, as it may be a mechanical defect requiring part replacement.

Question 5

Where is the lever or button to adjust the backrest on the ABC DESIGN SALSA 4 AIR stroller?

Accepted Answer

On the ABC DESIGN SALSA 4 AIR stroller, the lever or button to adjust or fold down the backrest is generally located at the back of the seat, near the top or sides.

Here’s how to locate it:

Look at the back of the seat, at the level of the backrest, often near the child's head.
The mechanism may be a small button to press or a small lever to pull.
It is designed to be easily accessible to safely adjust the angle of the backrest.

If you have difficulty, carefully inspect the sides and back of the seat, as the lever may be discreet but still visible. This position allows for quick and convenient adjustment during the use of the stroller.

User manual ABC DESIGN : user manuals and guides in PDF

Models ABC DESIGN most viewed

Browse manuals ABC DESIGN by appliance type

Recent questions about devices ABC DESIGN