Q: How to fully fold the ABC DESIGN Mint stroller when the upper part remains stuck?

Folding the Mint requires a specific step on the seat release handle , which must be activated before folding the upper part. Correct procedure: Pull the seat release handle upwards firmly until it clicks into place Once the handle is fully released, you can then fold the chassis and the upper part of the stroller If the upper part still remains stuck after this operation: Check that the safety harness is not caught on one side Ensure that the removable canopy is not obstructing the folding Make sure that the footrest is in the initial position (not stuck) Try gently rocking the stroller back and forth before fully folding it, this may release a tension point If the problem persists despite these checks, it may be that a part of the chassis is slightly misaligned and requires a physical inspection of the frame.

Question 1

The stroller is stuck in the driving position and refuses to fold

Accepted Answer

If your ABC Design Mint stroller refuses to fold, several locks must be released before folding. Here is the complete procedure to unlock the mechanism:

Essential unlocking steps:

Check that the 5-point harness is fully open by pressing the two buttons located on the sides and spread all anchor points to completely free the child
Ensure that the backrest is not locked in the reclined position - to straighten or adjust it, push the buttons on both sides of the adjustment mechanism inward and pull the backrest towards you
Check that the footrest is fully retracted - if it is in the low position, press the buttons on both sides, bring it up, then release to click it into place
Make sure that the front wheels are not locked - push the front wheel lever to the left to allow them to swivel

Unlocking and folding the mechanism:

Locate the seat unlock handle (usually located on the right side of the chassis)
Pull this handle upwards until you feel the click of the folding mechanism unlocking
Once unlocked, you can then fold the stroller by bringing it together for the compact position

Additional checks: The parking brakes must be loosened (lever up) to facilitate folding. Also check that no object is stuck between the chassis and the seat. If after these steps the stroller still resists, an element may be physically stuck or a folding mechanism damaged - contact ABC Design service for assistance.

Question 2

How to fully fold the ABC DESIGN Mint stroller when the upper part remains stuck?

Accepted Answer

Folding the Mint requires a specific step on the seat release handle, which must be activated before folding the upper part.

Correct procedure:

Pull the seat release handle upwards firmly until it clicks into place
Once the handle is fully released, you can then fold the chassis and the upper part of the stroller

If the upper part still remains stuck after this operation:

Check that the safety harness is not caught on one side
Ensure that the removable canopy is not obstructing the folding
Make sure that the footrest is in the initial position (not stuck)
Try gently rocking the stroller back and forth before fully folding it, this may release a tension point

If the problem persists despite these checks, it may be that a part of the chassis is slightly misaligned and requires a physical inspection of the frame.

User manual ABC DESIGN Stroller : user manuals and guides in PDF

Models ABC DESIGN Stroller most viewed

Other categories ABC DESIGN

Recent questions about Stroller ABC DESIGN