User manual SEVERIN Milk frother : 14 free PDF user manuals

Q: Can the SEVERIN SM 3584 frother heat and froth milk at the same time?

Yes, the SEVERIN SM 3584 can heat and froth milk simultaneously. This device is specifically designed to perform this operation in one step. The device has 4 operating modes : More froth - maximizes froth with less milk (up to 100 ml) Less froth - produces froth with more milk (up to 100 ml) Hot milk only - heats milk without frothing (up to 200 ml) Cold froth - creates froth from cold milk To achieve hot and frothy milk, select the "More froth" or "Less froth" mode using the FUNCTION button, then press ON/OFF. The device will automatically heat and froth in one cycle. Note: The first two modes (More/Less froth) always combine heating and frothing simultaneously. The maximum capacity for these modes is 100 ml. The "Hot milk only" mode allows heating up to 200 ml without froth.

Q: What is the mixing nozzle (blandningsmunstycke) of the SM 3585 and what is it used for?

The mixing nozzle (blandningsmunstycke) is the essential element located inside the milk reservoir of the SEVERIN SM 3585 frother. It is the part that actually generates the foam and the circulation of the milk when the device is in operation. The three types of nozzles included Smooth nozzle - For frothing milk and creating light foam Notched nozzle - For heating milk or preparing hot chocolate / cocoa Notched nozzle with cover - Protected variant of the notched nozzle How to install it Place the nozzle in the milk reservoir and push it down. It should click properly onto the lower surface of the protruding part of the reservoir. Maintenance All nozzles are dishwasher safe. You can also clean them manually with hot water. For the notched nozzle, it can be disassembled and cleaned with a suitable brush if necessary. In case of a problem If the milk does not froth and the indicator light flashes blue and red, check that the mixing nozzle is properly installed on the protruding part of the reservoir.

Q: Why doesn't the milk froth in the SM 3585?

The issue of milk not frothing is generally due to the incorrect installation of the mixing nozzle (blandningsmunstycke). Here’s how to resolve this issue: Check the mixing nozzle Ensure that the smooth nozzle (used for frothing) is properly installed on the protruding surface of the tank The nozzle must be securely attached and fully pushed in If the indicator light flashes both blue and red , it signals that the nozzle is missing or not properly installed - reinstall it Use the right type of milk Use high-protein milk for better froth The milk should be directly out of the refrigerator (cold) - this is essential for good frothing Select the right function Make sure you have selected the frothing function (cold froth or hot froth) before starting If the motor seems blocked Remove the tank, check for any obstruction inside, then restart the device If you have checked all these points and the milk still does not froth properly, there may be a technical issue with the device.

Q: How do I remove the spiral whisk for cleaning?

The spiral whisk of the SEVERIN SM 3584 can be easily removed for cleaning. Here’s how: Hold the device with one hand and pull the spiral whisk straight up to remove it from the stirrer (the central axis). Once removed, clean the whisk with a brush to eliminate any foam or milk residues. Tip: If the spiral whisk is stuck or seems jammed, check that the inner ring is not misaligned. If it is, you can slightly spread the ends of the inner ring and bring them closer together so that it fits properly in the stirrer.

Q: How to use the whisk without the spiral accessory?

Yes, you can use the emulsifying whisk without the spiral accessory. According to the SM 3584 manual, this allows you to heat the milk without frothing it . Using without the spiral accessory: Remove the lid from the reservoir Pour 75 to 200 ml of milk according to your needs Close the lid Plug in the device Place the reservoir on the base Press the FUNCTION button 3 times to select the "hot milk only" mode Press ON/OFF to start the cycle The device will automatically stop at the end To froth the milk, reinstall the spiral accessory on the whisk.