What pressure in bars and what water flow for the BT-HP 1435?

Question

Accepted Answer

The Einhell BT-HP 1435 is a compact high-pressure cleaner designed for domestic tasks. Its pressure and flow characteristics are as follows:

Nominal measurement pressure: 95 bar (9.5 MPa) - this is the standard operating pressure of the device
Maximum permissible pressure: 140 bar (14 MPa) - the absolute maximum pressure that the device can reach in short-term operation
Water flow: 6 l/min, or 360 liters/hour - this flow allows for good cleaning efficiency with controlled water consumption

To operate correctly, the cleaner requires a maximum water supply pressure of 6 bar (0.6 MPa). The device is powered at 230V with a power of 2000W and operates only with cold or lukewarm water, at a maximum temperature of 40°C to avoid damaging the pump.

These characteristics make it suitable for cleaning domestic surfaces such as cars, patios, gardening tools, and facades. Lukewarm water slightly improves cleaning efficiency, but always respect the 40°C limit to preserve the integrity of the device's pump.

User manual EINHELL Pressure washer : user manuals and guides in PDF

Models EINHELL Pressure washer most viewed

Other categories EINHELL

Recent questions about Pressure washer EINHELL