Question 1

What does the flashing green light on the charging station of the EINHELL FREELEXO+ robotic mower mean?

Accepted Answer

The flashing green light on the charging station of your EINHELL FREELEXO+ robotic mower generally indicates that the robot is in charging mode. Here’s what it means and the actions to check:

Meaning of the flashing green light

A flashing green light indicates that the station is charging the battery of the robotic mower.

What to do if the light is flashing?

Check the position of the robot: Make sure the robot is correctly positioned on the charging station, with the charging contacts properly aligned.
Check the power supply: Ensure that the station is plugged in and that the power cable is not damaged.
Be patient: The flashing may last during charging. If the charging takes a long time, this may be normal.
Monitor the battery: If the green light continues to flash for an extended period without the battery seeming to charge, there may be an issue with the battery or the charging station.

In summary, a flashing green light is a normal charging indicator, but you should ensure everything is properly connected and that the robot is correctly positioned. If the problem persists, it may be necessary to check the condition of the battery or the charging system.

Question 2

What buttons are present on the control panel of the EINHELL FREELEXO 500 LCD BT+ robotic mower and what do they do?

Accepted Answer

The control panel of the EINHELL FREELEXO 500 LCD BT+ robotic mower is equipped with an LCD screen and 7 main buttons that allow you to fully control and configure the device.

The LCD screen (50) displays the navigation menu, the status of the robot, and all important information such as battery level, the status of the current program, and any error messages.

The buttons on the control panel are:

SET button (51): This settings button allows you to access the fundamental parameters of the robot. It provides access to the mowing schedule configuration, cutting height (from 25 to 60 mm), mowing times, security PIN management, date and time, language selection, and software version.
MODE button (52): This mowing program button allows you to select and start the various available mowing programs. You can choose between the main area and the secondary area according to your configuration, or select the “Return to charging station” option.
START button (53): This start button launches the selected mowing program. Once the program is chosen via MODE, press START for the robot to begin the mowing cycle.
BACK button (54): This back button allows you to exit a menu or settings page and return to the previous screen. It interrupts navigation without validating changes.
Navigation buttons (55): These directional buttons allow you to navigate through the menus on the LCD screen to access different sections and modify settings. You will use them to select options and adjust values (cutting height, times, etc.).
OK button (56): This confirmation button validates your choices and the modifications made to the settings. Once your adjustments are made, press OK to save them.

Red STOP button (3): This emergency stop button located at the top of the robot allows you to immediately stop the mowing cycle and unlock the protective cover of the LCD screen. After pressing STOP, the robot stops and waits for your instructions. A window then appears on the screen to confirm the lifting of the STOP status.

These controls facilitate the complete management and customization of your FREELEXO 500 LCD BT+ robotic mower for optimal use according to your needs.

Question 3

How to start the EINHELL FREELEXO 500 LCD BT+ lawn mower robot step by step?

Accepted Answer

To start your EINHELL FREELEXO 500 LCD BT+ lawn mower robot correctly, follow these detailed steps:

1. Preparing the robot

Place the robot in a dry and clean area.
Ensure that the charging station is properly installed on a flat surface and is plugged into a power source.

2. Battery check and charging

If possible, remove the battery to check that it is not damaged.
Fully charge the battery before first use or after a prolonged period of inactivity.
Replace the battery in the robot if it has been removed.

3. Cleaning and inspection

Clean the blades and the underside of the robot with a soft brush to remove grass and dirt residues.
Ensure that the wheels are free and not blocked by debris.
Check the condition of the blades and replace them if they are worn or damaged.

4. Adjusting the cutting height

Adjust the cutting height according to your preferences using the knob or button provided for this purpose on the robot.

5. Software update

Check if firmware updates are available via the mobile app or the manufacturer's website and install them if necessary.

6. Powering on and programming

Turn on the robot by pressing the power button.
Use the mobile app or control panel to schedule mowing times according to your needs.

7. Starting the mowing

You can start mowing manually or let the robot operate automatically according to the defined schedule.

By following these steps, your EINHELL FREELEXO 500 LCD BT+ lawn mower robot will be ready to operate efficiently to maintain your lawn.

Question 4

How to reactivate the EINHELL FREELEXO 500 LCD BT+ robotic mower after the winter period?

Accepted Answer

To reactivate your EINHELL FREELEXO 500 LCD BT+ robotic mower after winter, follow these essential steps:

1. Battery check and charge

Ensure that the battery is fully charged. After a prolonged period of inactivity, it is important to fully recharge it to ensure optimal performance.

2. Cleaning the mower

Carefully clean the mower by removing grass clippings, dirt, and debris accumulated under the machine and around the blades. This helps prevent blockages and ensures smooth operation.

3. Blade inspection

Inspect the blades to ensure they are not dull or damaged. Replace them if necessary to achieve a clean and efficient cut.

4. Cutting height adjustment

Adjust the cutting height according to the season and the growth of your lawn for optimal results.

5. Software update

Check if firmware or application updates are available and install them to benefit from the latest improvements and fixes.

6. Functionality test

Run the robot in a limited area to observe its behavior and ensure everything is working correctly before allowing it to mow the entire lawn.

By following these steps, your robotic mower will be ready to efficiently resume its work for the new season.

User manual EINHELL Robotic mower : user manuals and guides in PDF

Models EINHELL Robotic mower most viewed

Other categories EINHELL

Recent questions about Robotic mower EINHELL