User manual EINHELL Hedge Trimmers : 49 free PDF user manuals

Q: The motor works but the blades do not turn

If the motor of your EINHELL GEEH 6560 works but the blades do not turn, here are the steps to check: Main checks Press both control handles simultaneously - For the device to operate, you need to press both the button on the front handle (Position A) and the one on the rear handle (Position B). If you release either of these two pressures, the blades will stop immediately for safety reasons. Completely clean the blades - Residues of vegetation, dirt, or debris can block the blade mechanism. Use a brush to clean both counter-rotating blades and check that no material is stuck between them. Check the power cord - Ensure that the cable is not damaged (tears, cracks) and that it is properly plugged in. Also, check that the cable's tension release system is properly secured. Before any intervention - Always unplug the power plug before inspecting or cleaning the device. If after these checks the blades still do not turn despite the motor working, the internal transmission chain may be damaged and will require intervention by a service center.

Q: Which batteries (accumulators) are compatible with the GCLC 1815 T hedge trimmer?

The EINHELL GCLC 1815 T hedge trimmer works with the lithium-ion accumulator GC-LC 1815 T with a voltage of 18V DC and a capacity of 1.5 Ah . This accumulator is a model specifically designed by Einhell for this device. It charges with the charger NG-GC-LC 1815 T in about 1 hour . The battery is completely waterproof and maintenance-free . Important: avoid completely discharging it, as this would damage it. For long-term storage, remove it from the device and store it in a cool, dry place between 5 and 30°C.

Models EINHELL Hedge Trimmers most viewed

User manual EINHELL Hedge Trimmers : user manuals and guides in PDF

Models EINHELL Hedge Trimmers most viewed

Other categories EINHELL

Recent questions about Hedge Trimmers EINHELL