Question 1

How do I record a video with my OLYMPUS mju 300 Digital camera?

Accepted Answer

To record a video with your OLYMPUS mju 300 Digital, fully open the lens protection cover. Press the Mode button to display the virtual mode selection dial. Select the video icon (MOVIE symbol) and press OK to activate video recording mode. The video symbol and the total available recording time will then be displayed on the LCD screen.

To start recording, frame your subject on the LCD screen. Press the shutter button halfway to lock the focus and white balance. Then fully press the shutter button to start recording. The orange light to the right of the viewfinder will turn on and the video symbol will turn red, displaying the remaining recording time. To stop recording, press the shutter button again. The orange light will blink while the video is being recorded on the memory card.

Available recording modes: The OLYMPUS mju 300 Digital offers two video modes. The HQ mode records at 320x240 pixels at 15 frames per second (maximum duration: about 16 seconds on a 16 MB card). The SQ mode offers a resolution of 160x120 pixels at 15 frames per second (maximum duration: about 70 seconds on a 16 MB card). The actual duration depends on the available space on your xD-Picture Card memory card.

Important limitations: The 3x optical zoom cannot be adjusted during video recording and remains locked in wide-angle position. Set your zoom before starting or enable digital zoom in the CAMERA menu if necessary. The flash is disabled in video mode and audio recording is not supported. Recording videos takes longer than taking photos. When the memory card capacity is reached, recording stops automatically. Do not remove the battery or card during recording or while the video is being stored on the card.

Question 2

What SD card capacity is compatible with the Olympus Μ-7030 camera?

Accepted Answer

The Olympus Μ-7030 digital camera is compatible with several types of SD memory cards, each with specific capacities:

Standard SD cards: up to 2 GB
SDHC cards: from 4 GB to 32 GB
SDXC cards: 32 GB and above

To ensure optimal performance, it is recommended to use SD cards of class 4 or higher. This guarantees sufficient writing speed for capturing and recording photos and videos.

Question 3

Does the Olympus E-PM1 have a built-in viewfinder?

Accepted Answer

No, the Olympus E-PM1 does not have a built-in viewfinder. This model uses only an LCD screen for composing and viewing images.

Here are some additional details:

Image composition: You compose your photos by looking at the LCD screen located at the back of the camera.
Optional accessories: It is possible to add a compatible external viewfinder, sold separately, which attaches to the camera's hot shoe.
Advantages: The absence of a built-in viewfinder makes the camera more compact and lightweight.

In summary, to frame your photos with the Olympus E-PM1, you will need to use the LCD screen or an external viewfinder if you prefer this shooting mode.

Question 4

How can I tell if the image stabilization (IS) is activated and working on the Olympus E-PM1?

Accepted Answer

To check if the image stabilization (IS) is activated and functioning correctly on your Olympus E-PM1, follow these steps:

1. Check the stabilization indicator

When you turn on the camera, look at the LCD screen or in the viewfinder. An icon or message indicating that stabilization is activated may appear. On some models, a hand or stabilizer symbol is displayed.

2. Check the settings in the menu

Access the camera menu, then look for the Image Stabilization or IS option. If this option is set to "On" or "Enabled", stabilization is indeed activated.

3. Observe the image behavior

In live view mode, gently move the camera. If stabilization is working, you should see the image on the screen stabilize and less shaking appear.

4. Perform a shooting test

Take a photo while holding the camera handheld. If stabilization is active and effective, the image will be sharp and free of motion blur. Compare it with a photo taken without stabilization activated to notice the difference.

By following these steps, you can confirm whether the IS function of your Olympus E-PM1 is activated and operational.

Question 5

How to activate image stabilization on the Olympus E-PM1?

Accepted Answer

On the Olympus E-PM1, image stabilization is activated via the Live Control (live control panel). Here are the precise steps:

Press the INFO button or the control icon to display the Live Control on the screen
Use the directional arrows to navigate to the Image Stabilizer option
Press the confirmation button (right arrow) to access the options
Select one of the three available options:
- IS Off: stabilization disabled
- Auto: stabilization automatically activated in all directions (recommended option for normal use)
- Vertical IS: vertical stabilization only (to be used during horizontal panning)
- Horizontal IS: horizontal stabilization only (to be used during panning with the camera in portrait mode)
Confirm your selection by pressing the confirmation button again

Important points: If your lens has a built-in image stabilization function, disable the body stabilization to avoid conflicts. When using a tripod, set the stabilization to IS Off to save battery and avoid unnecessary vibrations. Image stabilization produces a slight operational noise or vibrations: this is normal. At shutter speeds longer than 2 seconds, stabilization does not activate automatically.

Question 6

Is the Olympus C-460 Zoom camera compatible with SDXC memory cards?

Accepted Answer

The Olympus C-460 Zoom model is not compatible with SDXC memory cards. This device only supports SD and SDHC cards, which have a maximum capacity of 32 GB.

SDXC cards, which start from 64 GB and can go up to several hundred GB, will not work with this device. To ensure optimal performance, it is recommended to use SD or SDHC cards that comply with the device's specifications.

Question 7

How to activate and use manual focus on the Olympus C-765 Ultra Zoom camera?

Accepted Answer

To activate and use manual focus on the Olympus C-765 Ultra Zoom digital camera, follow these steps:

Steps to access manual focus

Turn on the camera and make sure it is in shooting mode.
Press the MENU button located on the back of the camera to open the main menu.
Use the directional arrows to navigate to the Focus or Manual Focus option.
Select this option by pressing the OK or SET button.
Choose the MF (manual focus) mode from the available options.
Confirm your choice by pressing OK or SET again.

How to manually adjust the focus

Once in manual focus mode, use the adjustment dial or the directional arrows to focus on your subject.
Observe the screen or viewfinder to check the sharpness of the image.
When the focus is correct, press the shutter halfway to lock the focus, then take the photo.

This method allows you to precisely control the sharpness of your photos, particularly useful in situations where autofocus may be difficult, such as in macro or low light conditions.

Question 8

What are the characteristics and type of the USB cable provided with the Olympus µ 740 camera?

Accepted Answer

The USB cable provided with the Olympus µ 740 digital camera is a USB 2.0 mini-USB type cable, which allows you to connect the device to a computer for transferring photos and videos.

Main characteristics of the USB cable:

Connector type on the device side: Mini-USB (often referred to as USB Mini-B)
Connector type on the computer side: Standard USB Type-A
Functions: Data transfer (photos, videos) between the device and a computer
Power supply: The cable is not used to charge the device's battery, which is charged via a dedicated external charger

To use this cable, plug the mini-USB connector into the dedicated port of the camera, then connect the other standard USB end to a computer. Turn on the device to enable file transfer. This cable is essential for backing up your images and videos to your computer or for using certain image management software provided by Olympus.

Question 9

How to turn on and operate the Olympus C-460 Zoom digital camera?

Accepted Answer

To turn on and operate your Olympus C-460 Zoom digital camera, follow these simple steps:

1. Insert the batteries

Open the battery compartment located at the back of the device.
Insert two AA batteries, respecting the indicated polarity (+ and -).

2. Insert a memory card

Open the memory card compartment, usually near the battery compartment.
Insert a compatible memory card (such as an xD-Picture card) in the correct orientation.

3. Turn on the device

Locate the power button, often found on the top of the device.
Press this button to turn on the device. The LCD screen or a light indicator should turn on.

4. Set the initial settings

If necessary, set the date and time through the device menus so that your photos are correctly timestamped.

5. Take a photo

Frame your subject through the viewfinder or the LCD screen.
Press halfway down on the shutter button to focus.
Press fully down on this button to capture the photo.

These steps will help you get started quickly with your Olympus C-460 Zoom. If you need help with a specific step, feel free to ask a more detailed question.

User manual OLYMPUS Digital Camera : user manuals and guides in PDF

Models OLYMPUS Digital Camera most viewed

Other categories OLYMPUS

Recent questions about Digital Camera OLYMPUS