Why does the image on my JVC XV-N210B DVD player appear completely green when playing a movie?

Question

Accepted Answer

A completely green image on your JVC XV-N210B DVD player is usually caused by an incorrect setting of the video output selector or a faulty connection. Here’s how to resolve this issue specifically for your model.

Check and adjust the video selector

The XV-N210B has a COMPOSITE - Y/C - RGB/COMPOSITE selector on the back panel. An incorrect setting of this selector is the most common cause of a green image. Depending on the type of connection to your television:

If your television has only a composite video input (yellow RCA jack), set the selector to COMPOSITE
If your television accepts Y/C signals (better quality), set the selector to Y/C
If you are using a SCART cable and your television accepts RGB, set the selector to RGB/COMPOSITE
If your television accepts both RGB and Y/C with a SCART, always set it to RGB/COMPOSITE - this is the setting recommended by the manufacturer

Check the physical connections

Make sure the video cable is properly connected. If you are using a SCART connector, check that the cable is fully inserted. If you are using RCA cables (yellow jack), ensure that the yellow cable is properly connected to both the XV-N210B DVD player and the video input of your television.

Test with other components

Try using a different video cable to rule out a cable defect. Also, test with another video port on your television to see if the problem persists. Finally, try playing another DVD to determine if the green image appears with all discs or only certain ones.

If after these checks the image remains green, it may indicate an internal defect in the DVD player at the video output circuit level. In this case, contact an authorized JVC repair service.

User manual JVC DVD player : user manuals and guides in PDF

Models JVC DVD player most viewed

Other categories JVC

Recent questions about DVD player JVC