KOOS - JANE - Free user manual and instructions

USER MANUAL KOOS JANE

Parts of the KOOS Platform

General Instructions Choosing where to install the platform 1. Installing the platform in the vehicle 2. Installing the KOOS baby carrier on the platform 3. Detaching the KOOS baby carrier from the platform Warnings Recommendations Maintenance Information about the guarantee

KOOS PLATFORM Parts of the KOOS Platform

2_ 3_ 4_ 5_ 6_ 7_ 8_ 9_ 10_ 11_

Anti-rotation leg ISOfix fasteners ISOfix release button ISOfix length adjustment handle Leg height adjuster button Instruction compartment Instructions Pro-Fix fastener KOOS fastening guard Leg to vehicle floor contact indicator

Your new KOOS Platform from JANÉ is an accessory that has been designed to make installing the KOOS baby carrier easier in the car.

The platform is fastened to the car with ISOfix anchors so there is no need to fit the seat belts over the KOOS baby carrier. The KOOS Platform has passed the strict safety tests of European Standard ECE R44/04. This is a Semi-Universal ISOfix platform, in other words, it is compatible with most vehicle seats. The approved vehicles list shows which are completely compatible. An updated list can be seen on our website. It is very important that you read these instructions carefully before using the KOOS platform for the first time. Make sure that everyone who is ever going to use the platform also knows how to install it and use it correctly. It has been discovered that a significant percentage of car seat users do not install their seats correctly, understanding the instruction manual and following it correctly is as important for safety as the actual seat. Keep the instructions in the compartment on the platform and consult them if in any doubt. You can find on our web page: www.jane.es pictures that show how to install and use all the JANÉ safety products. You can also find a copy of these instructions in digital format.

GENERAL INSTRUCTIONS The KOOS Platform can be installed on the front seat, if there is no airbag, or on the back seat. It is advisable to install it on the back seat. If you install it on the front seat of the car, the seat must not have an airbag, or it must be disconnected.

The KOOS platform can only be installed using ISOfix fasteners. It has a leg as an anti-swivel mechanism, adjust it correctly so that it is supported by the floor of the vehicle.

Regularly check that the ISOfix fasteners and the antiswivel leg are correctly connected and/or adjusted.

This platform has been designed for use in the car, therefore, it should not be used out of the car.

In order to protect the baby correctly and guarantee his comfort and safety in the car, it is necessary to follow the instructions below:

It is very important NOT to use second-hand products, since JANÉ can only guarantee the complete safety of articles used by the original buyer.

JANÉ recommends that the KOOS platform should be replaced by a new one when it has been subjected to severe strain in the event of an accident.

KOOS PLATFORM Choosing where to install the platform

Not all systems are the same, so we advise you to check this in the vehicle in which the platform is going to be installed. To install the platform, read the instruction manual for your car, as this will indicate which seats are compatible with the platform. The KOOS platform is compatible with the ISOfix categories: Classes C, D and E. The anti-rotation leg (2) is very important for safety, adjust it properly so that it is supported by the floor of the vehicle. If the supporting surface for the leg is not the actual vehicle chassis (a storage compartment for example) do not install the platform on this seat.

1. Installing the platform in the vehicle

1a - Place the platform on the vehicle seat with the antirotation leg (2) and the KOOS fastening guard (10) unfolded. 1b - Take the ISOfix fasteners out (3) turning the button (5) on the front of the base. 1c - Guide both fasteners (3) towards the ISOfix axles of your vehicle and press until both sides are locked into place. Two green signals will appear on the release buttons (4) indicating that they are correctly fastened. If one or both indicators are red, try it again. 1d - Adjust the height of the leg (2) so that it is supported by the floor of the vehicle, the indicator on the base of the leg (11) will turn green. Removing the platform 1e - Loosen the platform by turning the handle on the front of the platform (5). 1f - Release the ISOfix fasteners by pulling the buttons (4), the button indicator will turn red. 1g - Remove the platform.

2a - Drop the baby carrier so it locks into place with the ProFix fasteners (9).

2b - Check that both sides are fastened into place, the indicator should be green. 2c - Set the KOOS handle to the auto position, the car symbol should be complete. 2d - Turn the handle (5) so that the whole ensemble is secure against the backrest of the vehicle

3. Detaching the KOOS baby carrier from the platform

WARNING Never leave the child alone.

Any alteration or addition to the device without due authorisation from JANÉ may seriously alter the safety of the retention system. Read these instructions carefully before use and keep them for future reference. Your child’s safety may be affected if you do not follow these instructions. This safety device must not be used without its upholstery, or with different upholstery that is not the original one, as it forms part of the safety characteristics of the system. Check that the seat has been installed correctly.

2. Installing the KOOS baby carrier on the platform

3a - Pull the buttons on both sides of the handle of the baby carrier to release the Pro-fix anchors and lift the baby carrier off the base.

RECOMMENDATIONS KOOS PLATFORM Keep this instruction manual for future reference.

Always keep it in the compartment on the frame (7). Make sure that any luggage or other objects inside the car that could cause harm in the event of an accident are properly secured or stored away. The platform should be secured with the ISOfix fasteners, even when not in use, as in the event of an accident it could move and injure the other occupants of the vehicle. Remember not to use the Platform in cars fitted with a frontal airbag, unless this can first be disconnected or deactivated, if in doubt consult the vehicle manufacturer or dealership.

MAINTENANCE Wash the plastic parts with soap and warm water, then dry all the parts properly.

For your safety and the good conservation of this product, it is important to bring it to one of our official workshops for regular inspections.

INFORMATION ABOUT THE GUARANTEE This article comes with a guarantee in accordance with the provisions of law 23 / 2003 of 10th July. Keep your receipt as proof of purchase, it is essential to present the receipt in the shop where you bought the product to confirm validity of the guarantee in the event of any problems.

This guarantee excludes any defects or breakages caused by inappropriate use of the article or inobservance of the safety and maintenance rules listed in the instruction pages and on the care labels, as well as faults caused by wear and tear through normal use and daily handling. The label displaying the chassis number of the model should never be taken off, it contains important information. Notice: For the maximum safety and care of your new JANÉ product, it is very important that you complete the registration card found on the web page www.jane.es This registration means we can inform you, if necessary, of the evolution and maintenance of your product. Additionally, if you would like, we can also inform you about new models or news that we think may be useful for you.

23_ 24_ 24_ 25_ 25_ 25_ 26_ 26_ 26_

1g - Retirez la base.

2_ 3_ 4_ 5_ 6_ 7_ 8_ 9_ 10_ 11_

www.jane.pl jane@euro-trade.pl

UK RUSSIA FOR OTHER COUNTRIES please contact our export department export@jane.es