HS 70 - Hair Straightener BEURER - Free user manual and instructions
Find the device manual for free HS 70 BEURER in PDF.
User questions about HS 70 BEURER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Hair Straightener in PDF format for free! Find your manual HS 70 - BEURER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HS 70 by BEURER.
USER MANUAL HS 70 BEURER
natural_image
Exterior view of a Benjorie hair curling iron (no text or symbols visible)EN Hair straightener Instructions for use......11
natural_image
Illustration of an open book with a geometric arrow pointing to the front page (no text or symbols present)EN Unfold page 3 before reading the instructions for use.
Read these instructions for use carefully. Follow the warnings and safety notes. Keep these instructions for use for future reference. Make the instructions for use accessible to other users. If the product is passed on, provide the instructions for use to the next user as well.
WARNING
- The product is only intended for domestic/private use, not for commercial use.
- This product can be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or people lacking experience or knowledge, provided that they are supervised or have been instructed on how to use the product safely and are aware of the consequent risks of use.
• Children must not play with the product. - Danger of suffocation! Keep packaging materials away from children.
- Cleaning and user maintenance must not be performed by children unless supervised.
-
Under no circumstances should you open or repair the product yourself. If you do so, it may no longer function correctly. Failure to comply will invalidate the guarantee.
-
When using the product in the bathroom, unplug the plug after use as water in the vicinity constitutes a danger, even when the product is switched off.
- As an additional safety measure, we recommend the installation of a residual-current device (RCD) with a rated operational current not exceeding 30 mA in the bathroom circuit. Your local electrical specialist can provide you with the relevant information.
CONTENTS
- Included in delivery 12
- Signs and symbols.... 12
- Warnings and safety notes......13
- Product description....14
-
Usage 14
-
Cleaning and maintenance.....15
- Disposal....16
- Technical specifications .... 16
- Guarantee....16
1. INCLUDED IN DELIVERY
Check that the exterior of the cardboard delivery packaging is intact and make sure that all contents are included in the delivery. Before use, ensure that there is no visible damage to the product and supplied components, and that all packaging material has been removed. If you have any doubts, do not use the product and contact your retailer or the specified Customer Services address.
• 1 Hair straightener
• 1 heat-resistant storage bag
• 1 set of these instructions for use
2. SIGNS AND SYMBOLS
The following symbols are used on the product, in these instructions for use, on
the packaging and on the type plate for the product:

DANG
Indicates an imminent danger. If it is not avoided, it will result in death or serious injury.

WARNING
Indicates a potentially impending danger. If it is not avoided, there is a risk of death or serious injury.

CAUTION
Indicates a potentially impending danger. If it is not avoided, slight or minor injuries may result.
NOTICE
Indicates a potentially harmful situation. If it is not avoided, the system or something in its vicinity may be damaged.

Product information Note on important information

Read the instructions

The electronic device must not be disposed of with household waste

Manufacturer

CE labelling
This product satisfies the requirements of the applicable European and national directives.

Marking to identify the packaging material. A = material abbreviation, B = material number: 1-7 = plastics, 20-22 = paper and cardboard

Separate the product and packaging elements and dispose of them in accordance with local regulations.

Protection class II device

The products demonstrably meet the requirements of the Technical Regulations of the EAEU

Conformity assessed marking for the United Kingdom

Importer


Danger
This device must not be used near water or in water (e.g. in a wash basin, or in the shower or bath) – risk of electric shock!

Do not wind the cable around the device!
3. WARNINGS AND SAFETY NOTES
The product is only intended for the purpose described in these instructions for use. The manufacturer is not liable for damage resulting from improper or careless use. Failure to observe the following information may result in personal injury or material damage.
Intended purpose

WARNING
- The device must be used for the purpose for which it was designed and in the manner specified in these instructions for use. Any form of improper use can be dangerous.
- This device may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or a lack of experience or knowledge, provided that they are supervised or have been instructed on how to use the device safely, and are fully aware of the consequent risks of use.
• Children must not play with the device. - Danger of suffocation! Keep packaging materials away from children.
- Cleaning and user maintenance must not be performed by children unless supervised.
-
Do not use this device near bathtubs, shower trays or other containers which have water in them.
-
Risk of electric shock! Never submerge the device in water or other liquids. If the device falls into water, do not reach into the water! First switch off the fuse at the fuse box and then pull the mains plug out of the socket.
- When using the device in the bathroom, unplug the plug after use as water in the vicinity constitutes a danger, even when the device is switched off.
- As an additional safety measure, the installation in the bathroom circuit of a residual current device (FI/RCD) with a rated tripping current not exceeding 30 mA is recommended. Ask your installer for advice.
- If the mains connection cable of this device is damaged, it must be replaced by the manufacturer, its customer service department or a similarly qualified person to avoid any risk. Do not use the device if it is damaged or not functioning correctly.
- This device is not designed for use in commercial areas.
- Do not pull, twist or bend the mains cable 11 ! Untangle the mains cable 11 if it is twisted. Do not wind the mains cable 11 around the device!
- Under no circumstances should you open or repair the device yourself, as correct functioning of the device can no longer be guaranteed should you do so. Failure to observe this will invalidate the warranty.
- The Hair straightener must only be used for private use to straighten and style your own hair.
4. PRODUCT DESCRIPTION
The related illustrations are on page 3.
1 Coated hot plates
2 lon outlet
3 LED display
4 Button for increasing the temperature (+)
5 Button for decreasing the temperature (-)
6 ON/OFF button
7 Keylock
8 Plate locking
9 360° swivel joint with antikink protection
10 Hanging loop
11 Mains cable
5. USAGE
WARNING
Risk of burns and fire!
The device becomes very hot. When the device is switched on, it must only be held using the handle. Do not touch the coated hot plates 1. Do not clamp objects between the coated hot plates 1.
- Position yourself on a dry, non-conductive surface. Make sure that your hands are dry!
- Hair should be clean and free from styling products. The exception to this is special products designed to help straighten hair.
-
Comb your hair with a large-toothed comb to get rid of any tangles.
-
Open the device using the plate locking system 8.
- Briefly hold down the ON/OFF button 6 to switch on the device.
- Use the temperature switch 4 and 5 to set your desired temperature. The current set temperature setting is shown in the LED display 3. You can use the temperature switch 4 and 5 to increase or decrease the temperature in steps of 20. We recommend the following temperature settings:
| 100 °C to 140 °C | for fine, brittle, coloured or bleached hair |
| 160 °C to 180 °C | for normal hair |
| 200 °C to 220 °C | for thick and resist-ant hair |
- The LED display 3 flashes during the heat-up phase. The LED display 3 lights up continuously as soon as the device has heated up. The device is now ready for use.
- Part the hair into individual sections of approximately 3 to 4 cm.
- Place the individual sections between the coated hot plates 1 close to the root.
- Slowly move the device from the roots to the tips in a fluid motion. Never hold the device in one place for more than two seconds. This will achieve the best results without subjecting your hair to excess stress or damage.
- To shape the tips, turn the device out wards or inwards before moving it over the tips.
-
Press the ON/OFF button ^4 to switch off the device. Place the device on a non-flammable surface.
-
After each use, pull the mains plug out of the socket. Leave the device to completely cool down.
- Store the device in a dry place out of the reach of children. The fully cooled device can be stored and transported in the heat-resistant storage box.
NOTICE
The device has an automatic switch-off function and switches off automatically after 30 minutes for safety reasons.
NOTICE
The device has a button lock so that the device does not switch off if you press the ON/OFF button 6 unintentionally during use.
- To activate the button lock, press the ON/OFF button 6 twice. The LED display 3 shows 🔒
- To deactivate the button lock, press the ON/OFF button 6 twice again. The LED display 3 no longer shows 🔒
6. CLEANING AND MAINTENANCE
- Risk of electric shock! Always pull the mains plug out of the socket before cleaning the device. Make sure that the device has cooled down completely.
- Only clean the housing of the device and the coated hot plates 1 with a soft cloth dampened with warm water. Ensure that no water gets inside the device.
- Protect the device from dust, dirt and humidity.
- Risk of fire! Do not clean the device with highly flammable liquids.
- Do not clean the device in the dishwasher. Do not use any aggressive, caustic, abrasive or corrosive cleaning products or hard brushes.
7. DISPOSAL
For environmental reasons, do not dispose of the device in household waste at the end of its service life. Dispose of the device at a suitable local collection or recycling point in your country. Observe the local regulations for material disposal. Dispose of the device in accordance with EC Directive Waste Electrical and Electronic Equipment (WEEE). If you have any questions, please contact the local authorities responsible for waste disposal. You can obtain the location of collection points for old devices from the local or municipal authorities, local waste disposal companies or your retailer, for example.
8. TECHNICAL SPECIFICATIONS
| Weight: approx. 400 g |
| Voltage supply: 220-240 V~,50-60 Hz |
| Power consumption: 43 W |
| Temperature range: 100 - 220 °C |
| Protection class: II |
| Ambient conditions: Only approvedfor indoor use |
| Permissible tempera-ture range: -10 to +40 °C |
Subject to technical changes.
9. GUARANTEE
Further information on the guarantee and guarantee conditions can be found in the guarantee leaflet supplied.

FRANÇAIS

3. WAARSCHUWINGENEN VEILIGHEIDSRICHTLIJ- NEN
4. PRODUCTBESCHRIJVING
UK: BEURER UK Ltd., Suite 16, Stonecross Place, Stonecross Lane North, WA3 2SH, Lowton, United Kingdom
