MultiTalent 3 MCM3101B - Food Processor BOSCH - Free user manual and instructions

Product Type	Compact Food Processor
Brand	Bosch
Model	MultiTalent 3 MCM3101B
Dimensions (approx.)	20 × 20 × 30 cm
Weight (approx.)	3.5 kg
Power Supply	220-240 V, 50/60 Hz
Main Functions	Mixing, kneading, whisking, chopping, grating, blending, grinding, milling
Included Accessories	Universal blade with sheath, dough hook, whisk disc, reversible slicing/shredding discs (thick/thin slicing, coarse/fine shredding, slicing/shredding), blender, universal grinder with blade holder accessories (blender/grinder and mill), mixing bowl, lid, pusher
Mixing Bowl Capacity	1.0 L (max. liquid), 0.4 L (hot/foaming liquid)
Universal Grinder Capacity	Max. 200 g (depending on ingredient)
Speeds	2 speeds (1: slow, 2: fast) + pulse button (M)
Smart Tool Detection	Automatic accessory detection with color coding (gray for low speed, red for high speed)
Care and Cleaning	Base: wipe with a damp cloth. Bowl, lid, discs and accessories (except blade holder): dishwasher safe. Blades: clean with a brush, do not touch with bare hands. Blade holder: rinse under water, do not soak.
Safety	Lid lock: appliance only starts when bowl and lid are correctly assembled. Automatic shutdown in case of overload? Not mentioned. Splash protection? Lid with lock. Warnings: do not put fingers in the bowl during operation, use pusher.
Spare Parts and Repairability	Bosch after-sales service for repairs and spare parts. Universal grinder reference: 12005833. Additional accessories available.
Intended Use	Household use only, for common food preparation. Do not use for other substances.
Warranty	According to manufacturer's conditions (see after-sales service)

Frequently Asked Questions - MultiTalent 3 MCM3101B BOSCH

How do I change the speed during operation?

Turn the rotary switch to the desired position (1 for slow, 2 for fast, M for pulse). It is recommended to stop the appliance before changing accessories.

Can I use the food processor to blend hot liquids?

Yes, but with caution: do not pour more than 0.4 liters of very hot or foaming liquid into the blender. Steam may escape through the funnel in the lid.

How do I safely clean the sharp blades?

Never touch the blades with bare hands. Use a brush to clean them. Store the universal blade in its sheath when not in use. Grasp the shredding discs by the central plastic part.

The appliance does not start, what should I do?

Check that the mixing bowl, lid, and accessory are correctly placed and turned fully to the stop. If the problem persists, contact Bosch after-sales service.

Which accessories are dishwasher safe?

The mixing bowl, lid, pusher, shredding discs, dough hook, whisk disc, blender bowl (without blade holder), blender lid and funnel are dishwasher safe. The blade holder and universal blade must be hand washed with a brush.

Can I chop frozen foods in the blender?

No, it may damage the blender. Only ice cubes can be blended. Thaw other frozen foods first.

How do I use the universal grinder to grind coffee?

Use the grinding blade holder accessory. Only introduce roasted coffee beans. Do not exceed the maximum quantity indicated on the jug (MAX mark). Turn the switch to the desired position until you obtain the desired grind.

The plastic bowl has become discolored after grating carrots, is that normal?

Yes, this is normal. You can remove the discoloration by rubbing with a few drops of cooking oil.

What is the maximum capacity of the mixing bowl?

For liquids, the maximum capacity is 1.0 liter (0.4 liters for hot or foaming liquids). For solid foods, the optimal quantity is about 80 grams.

Can I use the appliance without the lid?

No, the lid is a safety feature. The appliance will not operate if the lid is not correctly locked. Additionally, it protects against splashes and contact with rotating blades.

USER MANUAL MultiTalent 3 MCM3101B BOSCH

MultiTalent 3 / 3Plus Compact food processor

MCM3...

MCM3P...

[en] Instruction manual Compact food processor 20

graph TD
    A["Step 1: Handwashing"] --> B["Step 2: Stacking with a cup, no text or symbols"]
    B --> C["Step 3: Stopping with a blender, adding food into bowl"]
    C --> D["Step 4: Stopping with a spoon, adding food into bowl"]
    D --> E["Step 5: Stopping with a spoon, adding food into bowl"]
    E --> F["Step 6: Stopping with a handwashing bag, adding food into bowl"]
    F --> G["Step 7: Stopping with a handwashing bag, adding food into bowl"]
    G --> H["Step 8: Stopping with a handwashing bag, adding food into bowl"]
    H --> I["Step 9: Stopping with a handwashing bag, adding food into bowl"]
    I --> J["Step 10: Stopping with a handwashing bag, adding food into bowl"]

graph TD
    A["Step 1: Stacking a blender with a brush and plastic cup"] --> B["Step 2: Stacking a cup with a spoon and plastic bottle"]
    B --> C["Step 3: Stacking a cup with a spoon and plastic bottle"]
    C --> D["Step 4: Stacking a bowl with a spoon and plastic bottle"]
    D --> E["Step 5: Stacking a bowl with a spoon and plastic bottle"]
    E --> F["Step 6: Stacking a cup with a spoon and plastic bottle"]
    F --> G["Step 7: Stacking a cup with a spoon and plastic bottle"]
    G --> H["Step 8: Stacking a cup with a spoon and plastic bottle"]
    H --> I["Step 9: Stacking a cup with a spoon and plastic bottle"]
    I --> J["Step 10: Stacking a cup with a spoon and plastic bottle"]
    J --> K["Click to mark the step 7"]

graph TD
    A["1. Cover with food"] --> B["2. Stirrer with liquid"]
    B --> C["3. Make a blender with a glass, click!"]
    C --> D["4. Stacking into bowl with cream"]
    D --> E["5. Stacking into cup with dipping sauce"]
    E --> F["6. Cutting into a plate with cookie"]
    F --> G["7. Cover with brush, add cookie"]
    G --> H["8. Paste with chocolate chip"]

E

graph TD
    A["Step 1: Stacking food into basket"] --> B["Step 2: Stacking food into blender"]
    B --> C["Step 3: Stopping a kitchen pot"]
    C --> D["Step 4: Stopping a blender with a brush"]
    D --> E["Step 5: Stopping a monitor with a fan"]
    E --> F["Step 6: Stopping a blender with a spoon"]
    F --> G["Click Button: click!"]

    subgraph Initial
        A --> B --> C --> D --> E --> F
    end
    style Initial fill:#f9f,stroke:#333
    style Final fill:#bbf,stroke:#333

F

		X	120 g	15 s	2
		X	100 g	5-15 s	2
		X	50 g	(1-3) x 1 s	M
		X	15 x	(2-5) x 1 s	M
		X	10 g	(2-5) x 1 s	M
		X	50 g	(4-10) x 1 s	M
	X		60 g	40-60 s	2
	X		100 g	40-60 s	2
	X		50 g	40-60 s	2

graph TD
    A["Kitchen Dish"] --> B["Beaker with cloth"]
    B --> C["Shrimpnet with mesh"]
    C --> D["Shutterfly lifting a net"]
    D --> E["Shutterfly cleaning in a bowl"]
    E --> F["Shutterfly holding a bottle"]
    F --> G["Shutterfly cleaning in a tray"]
    G --> H["Shutterfly cleaning in a basket with plastic bag"]
    H --> I["Shutterfly cleaning in a rack with plastic bag"]
    I --> J["Shutterfly cleaning in a storage cabinet with plastic bag"]

graph TD
    A["Raw Material"] --> B["Step 1: Rotation"]
    B --> C["Step 2: Rotation to Top Box"]
    C --> D["Step 3: Rotation to Top Box with Tip"]
    D --> E["Step 4: Rotation to Top Box with Cutout"]
    E --> F["Step 5: Rotation to Top Box with Blade"]
    F --> G["Step 6: Rotation to Top Box with Radial Cutout"]
    G --> H["Step 7: Rotation to Top Box with Cover"]
    H --> I["Final Product"]

This appliance is intended for domestic use and the household environment only. Use the appliance only for processing normal amounts of food and for normal amounts of time in domestic use. The appliance is suitable for mixing, kneading, beating, cutting and shredding food. The appliance must not be used for processing other substances or objects. Additional applications are possible if other accessories approved by the manufacturer are used. Only use the appliance with approved genuine parts and accessories. Never use the accessory parts for other appliances.

Only use the appliance indoors at room temperature and up to 2000 m above sea level.

Important safety notices

Read and follow the instruction manual carefully and keep for later reference! Enclose these instructions when you give the appliance to someone else. If the instructions for correct use of the appliance are not observed, the manufacturer's liability for any resulting damage will be excluded.

This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge if they are given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Keep children away from the appliance and connecting cable and do not allow them to use the appliance. Do not let children play with the appliance. Cleaning and user maintenance must not be performed by children.

Connect and operate the appliance only in accordance with the specifications on the rating plate. Do not use the appliance if the power cord and/or appliance are damaged.

Before replacing accessories or additional parts, which move during operation, switch off the appliance and disconnect from the power supply. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.

Do not place the power cord over sharp edges or hot surfaces.

To prevent injury, a damaged power cord must be replaced by the manufacturer or his customer service or a similarly qualified person.

Only our customer service may repair the appliance.

Safety instructions for this appliance

Risk of injury
Risk of electric shock

If the power is interrupted, the appliance remains switched on and restarts when the power is restored.

Never immerse the base unit in liquids or place under running water and do not clean in the dishwasher.

Before rectifying a fault, pull out the mains plug.

⚠️ Risk of injury from the rotating tools!

While the appliance is operating, never place fingers in the mixing bowl. Always use the pusher for adding ingredients.

After switching off, the drive continues running for a short time.

Change tools only when the drive is at a standstill.

⚠️ Risk of injury from sharp blades/rotating drive!

Never reach into the attached blender jug!

Do not remove/attach the blender jug until the drive has stopped. Do not remove/attach the universal cutter jug until the drive has stopped.

⚠️ Risk of injury from sharp blades!

Do not touch blades of the universal blade with bare hands. When not in use, always store the universal blade in the blade guard. Clean them with a brush.

Do not grip the sharp blades or edges of the cutting discs. Grip the discs by the plastic part in the centre only!

Do not place fingers in the feed tube. Only use the pusher when adding more ingredients. Do not touch blades of the blade insert with bare hands. Clean them with a brush.

Risk of scalding!

If processing hot liquids, steam escapes through the funnel in the lid. Add a max. 0,4 litres of hot or frothing liquid.

Risk of injury!

Never assemble accessories on the base unit.

⚠️ Important!

It is essential to clean the appliance thoroughly after each use or after it has not been used for an extended period. "Cleaning and servicing" see page 26

Explanation of the symbols on the appliance or accessory

Caution! Rotating tools.

Do not place fingers in the feed tube.

Lock blade insert in the blender or universal cutter jug.

Remove blade insert from the blender or universal cutter jug.

Blade insert with blender/cutting blade

Blade insert with grinding blade

Congratulations on the purchase of your new Bosch appliance. You can find further information about our products on our website.

Contents

Intended use 20

Important safety notices....20

Overview 22

Operation 22

Cleaning and servicing....26

Troubleshooting 26

Storage....26

Disposal....27

Customer Service 27

Recipes / Ingredients / Processing ..... 27

Overview

Fig. A

Base unit

1 Rotary switch

0/off = Stop

M = Instantaneous switching at maximum speed, hold switch for required blending duration.

Settings 1–2, Operating speed:

1 = low speed - slow,

2 = high speed - fast.

2 Drive

3 Cord store

4 Bowl

5 Tool holder

6 Tools\*

a Universal blade with blade guard
b Kneading hook
c Beating disc

7 Cutting discs*

a Slicing reversible disc – thick/thin
b Shredding reversible disc – coarse/fine
c Reversible slicing/shredding disc

8 Lid

a Filler opening
b Pusher

Accessories*

9 Blade insert with blender/cutting blade and seal

10 Blade insert with grinding blade and seal
11 Universal cutter jug
12 Blender jug
13 Lid for blender

a Filler opening
b Funnel-shaped stopper

* for some models

If the universal cutter is not included, it can be ordered from customer service (order no. 12005833).

Operation

Before operating the appliance and accessories for the first time, clean thoroughly; see “Cleaning and servicing”.

Smart tool detection (MCM3P...)

Every speed setting is identified with a different colour (grey and red). This colour coding system can also be found on the accessories. The accessories are automatically connected to the right speed setting.

Low speed, grey

with drive shaft

For using tools and cutting discs.

High speed, red

without drive shaft

For using the blender and universal cutter.

Preparation

■ Place the base unit on a smooth, clean surface.
■ Pull cable out of the base unit to the required length.

Important information

• Use only the rotary switch to switch the appliance on or off.
• Never switch the appliance off by rotating the bowl, the blender or a tool.
• Do not switch the appliance on unless tools or accessories have been completely attached.

Bowl with accessories/tools

Risk of injury from the rotating tools!

While the appliance is operating, never place fingers in the mixing bowl. Always use the pusher for adding ingredients. After switching off, the drive continues running for a short time. Change tools only when the drive is at a standstill.

Warning!

When working with the bowl, the appliance cannot be switched on until the bowl has been attached and the lid has been attached and screwed on tight.

Universal blade

for cutting, mincing, mixing.

Risk of injury from sharp blades!

Do not touch blades of the universal blade with bare hands. When not in use, always store the universal blade in the blade guard. Grip the universal blade by the edge of the plastic handle only.

Kneading hook

for kneading dough and mixing-in ingredients that ought not be cut (e.g. raisins and chocolate chips).

Beating disc

for cream, egg white and mayonnaise.

Fig. B

■ Attach the bowl (arrow on bowl on dot on the appliance ▼) and rotate as far as possible in a clockwise direction (▼).
■ Insert tool holder into the bowl.
■ Insert universal blade, whisking disc or kneading hook into the tool holder and release.

Note position of the tools when inserting them! Press tools all the way down.

Warning!

Do not add ingredients until the tools have been inserted.

■ Add ingredients.
■ Attach lid with pusher (match arrow on lid on dot on bowl ▼) and rotate in a clockwise direction (▼). Lid lug must be located fully in the slot in the bowl handle.
■ Insert the mains plug.
■ Set the rotary switch to the desired setting.
■ To add more ingredients, set the rotary switch to 0/off.
■ Remove the pusher and add ingredients through the feed tube. Pusher can be used as a measuring cup.

Cutting discs

Risk of injury from sharp blades!

Do not grip the sharp blades or edges of the cutting discs. Grip the discs by the plastic part in the centre only! Do not place fingers in the feed tube. Only use the pusher when adding more ingredients.

Slicing reversible disc – thick/thin

for slicing fruit and vegetables.

Process at setting 1.

Identification on the reversible slicing disc:

“grob” for the thick cutting side,

"fein" for the thin cutting side

Warning!

The reversible slicing disc is not suitable for slicing hard cheese, bread, rolls or chocolate. Slice boiled, waxy potatoes only when they are cold.

Shredding reversible disc – coarse/fine

for shredding vegetables, fruit and cheese, except for hard cheese (e.g. Parmesan).

Process at setting 1.

Designation on the reversible shredding disc: "2" for the coarse shredding side "4" for the fine shredding side

Warning!

The reversible shredding disc is not suitable for shredding nuts. Shred soft cheese with the coarse side only at setting 2.

Reversible slicing/shredding disc

for slicing and shredding fruit, vegetables and cheese.

Process at setting 2.

Note: Do not process any hard foods using the slicing/grating reversible disc as this may blunt the blade. Use the slicing reversible disc (thick/thin) for this purpose.

Fig. C

■ Attach the bowl (arrow on bowl on dot on the appliance ▼) and rotate as far as possible in a clockwise direction (▼).

■ Insert tool holder into the bowl.

Depending on the required use:

■ Place cutting disc on tool holder. Turn required slicing/shredding side face up. Place disc on the disc holder so that the drivers on the tool holder grip the opening in the discs.

■ Attach lid with pusher (match arrow on lid on dot on bowl ▼) and rotate in a clockwise direction (▼). Lid lug must be located fully in the slot in the bowl handle.

■ Insert the mains plug.
■ Set the rotary switch to the desired setting.
■ Fill with contents which are to be sliced or shredded.

■ When adding contents which are to be sliced or shredded, apply only light pressure to the pusher. Remove the pusher and add ingredients through the feed tube.

Warning!

Empty the bowl before it becomes so full that the cutting or grating contents reach the carrier disc.

After using the appliance

■ Set the rotary switch to 0/off.

■ Remove mains plug.
■ Rotate the lid in an anti-clockwise direction and remove.
■ Remove tool:

Take tool holder together with universal blade, whisking disc or kneading hook out of the bowl. Remove the tools from the tool holder.

■ Take out the cutting discs by the plastic stud in the centre. Take tool holder out of the bowl.

■ Rotate bowl anti-clockwise and remove.

■ Clean all parts, see “Cleaning and servicing”.

Blender

Blade insert with blender/cutting blade for mixing liquid or semi-solid food, for cutting/chopping raw fruit and vegetables, for puréeing food.

Warning!

Blender may be damaged. Do not process deep-frozen ingredients (except ice cubes). Do not operate blender when empty.

⚠️ Risk of injury from sharp blades / rotating drive!

Never place fingers in the attached blender! Do not remove/attach the blender until the drive is at a standstill. Do not touch blades of the blade insert with bare hands. Clean them with a brush.

Risk of scalding!

If processing hot liquids, steam escapes through the funnel in the lid. Add a max. 0,4 litres of hot or frothing liquid.

Fig. D

■ Place seal on the blade insert. Ensure that the seal is positioned correctly.

Important information

If the seal is damaged or not correctly positioned, liquid may run out.

■ Insert blade insert with blender/cutting blade 🍴 into the blender jug and lock anti-clockwise (💡). Rotate the blade insert at least until the arrow matches up with the marking on the blender jug.
■ Turn blender jug over (blade insert face down).
■ Attach the blender jug (match arrow on the jug to the dot on the appliance ▼) and rotate as far as possible in a clockwise direction (▼).
■ Add ingredients.

Maximum capacity, liquid = 1.0 litres (frothing or hot liquids max. 0.4 litres).

Optimal processing capacity – solids = 80 g.

■ Attach lid and press firmly. Hold lid while working.
■ Insert the mains plug.
■ Set the rotary switch to the desired setting.
■ To add more ingredients, set the rotary switch to 0/off.
■ Remove the lid and add ingredients

or

■ remove the funnel and gradually add solid ingredients through the refill opening
or
■ pour liquid ingredients through the funnel.

After using the appliance

■ Set the rotary switch to 0/off.
■ Remove mains plug.
■ Rotate the blender in an anti-clockwise direction and remove.
■ Remove lid.
■ Loosen blade insert clockwise ( ) and remove from the blender jug.
■ Clean all parts, see “Cleaning and servicing”.

Universal cutter

Use (depending on model):

• With the blade insert with blender/cutting blade 🍼 for cutting and chopping meat, hard cheese, onions, herbs, garlic, fruit, vegetables.
• With the blade insert with grinding blade 00 for grinding and cutting fairly small quantities of spices (e.g. pepper, cumin, juniper, cinnamon, dried anise, saffron), grain (e.g. wheat, millet, linseeds), coffee and sugar. It is not intended for grinding very dry, solid foods larger than coffee beans such as nutmeg, dry ginger ....

Caution!

Only fill the appliance with roasted coffee or espresso beans.

Risk of injury from sharp blades / Rating drive!

Do not remove/attach the universal cutter until the drive has stopped.

Do not touch blades of the blade insert with bare hands. Clean them with a brush.

Fig. F shows guide values for the maximum quantities and processing times when working with the universal cutter.

Fig. E

■ Put down universal cutter jug with the opening face up.
■ Add food, which is to be cut, in the jug. Note MAX mark on the jug!
■ Place seal on the blade insert. Ensure that the seal is positioned correctly.

Important information

If the seal is damaged or not correctly positioned, liquid may run out.

■ Insert blade insert (☐/☐) into the universal cutter jug and lock anti-clockwise (☐). Rotate the blade insert at least until the arrow matches up with the marking on the universal cutter jug.

■ Turn universal cutter over (blade insert face down).
■ Attach the universal cutter (arrow on jug on dot on the appliance ) and rotate all the way clockwise ( ).
■ Insert the mains plug.
■ Set the rotary switch to the desired setting.

Note: The longer the appliance remains switched on, the finer the ingredients are cut. Recommendations on using the accessories can be found in the section “Recipes/Ingredients/Processing”.

After using the appliance

■ Set the rotary switch to 0/off.
■ Remove mains plug.
■ Rotate universal cutter anti-clockwise and remove.
■ Turn universal cutter over (blade insert face up).
■ Loosen blade insert clockwise ( ) and remove from the universal cutter jug.
■ Empty jug.
■ Clean all parts, see “Cleaning and servicing”.

Cleaning and servicing

The appliance requires no maintenance. Thorough cleaning protects the appliance from damage and keeps it functional. An overview of cleaning the individual parts can be found in Fig. C.

⚠️ Risk of electric shock

Never immerse the base unit in water or place under running water.

Warning!

Surfaces may be damaged. Do not use abrasive cleaning agents.

Note: If processing e.g. carrots and red cabbage, the plastic parts will become discoloured by a red film which can be removed with a few drops of cooking oil.

Cleaning the base unit

■ Remove mains plug.
■ Wipe the base unit with a damp cloth.
If required, use a little detergent.
■ Then dry the base unit.

Cleaning the bowl and accessories

⚠️ Risk of injury from sharp blades!

Do not touch blades of the universal blade with bare hands. When not in use, always store the universal blade in the blade guard. Clean them with a brush. Do not grip the sharp blades or edges of the cutting discs.

Grip the discs by the plastic part in the centre only!

All parts are dishwasher-proof. Do not wedge plastic parts in the dishwasher as they could warp.

Cleaning the blender / universal cutter

⚠️ Risk of injury from sharp blades!

Do not touch blades of the blade insert with bare hands. Clean them with a brush.

The blender jug (without blade insert), lid and funnel are dishwasher-proof.

Do not clean the blade insert in the dishwasher, but under running water (do not soak in water). Remove seal for cleaning.

Troubleshooting

Risk of injury!

Before rectifying a fault, pull out the mains plug.

Fault:

Appliance does not start or appliance switches off during operation.

Possible cause:

Bowl or lid or the accessory has not been attached correctly or has become detached.

Remedial action:

■ Set the rotary switch to 0/off.
■ Correctly attach bowl/lid or accessory and screw on all the way.
■ Switch the appliance on again.

Important information

If the fault cannot be eliminated, please contact customer service (see customer service addresses at the end of this booklet).

Storage

Fig. H

The tools can be stored in the bowl to save space.

Disposal

Dispose of packaging in an environmentally-friendly manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU. Please ask your specialist retailer about current disposal facilities.

Customer Service

Detailed information on the warranty period and terms of warranty in your country is available from our after-sales service, your retailer or on our website.

The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.

Recipes / Ingredients / Processing

Tool Speed Time Recipes / Ingredients / Processing
or	low approx.1-2 min	Yeast dough– Max. 500 g flour– 25 g yeast or 1 packet of dried yeast– 220 ml milk (room temperature)– 1 egg– 1 pinch of salt– 80 g sugar– 60 g butter– Graded rind of half a lemon■ Add all ingredients (except the milk) to the bowl.■ Set rotary switch to a low speed for 10 seconds.■ Add milk and stir at low speed for about 112 minutes.Ingredients should be at the same temperature. When the dough has a smooth appearance, place in a warm location.
	M Onions, garlic	– from 1 onion, quartered, up to 300 g– from 1 clove of garlic up to 300 g■ Process until it has been chopped to the required size.
	high Hard cheese (e.g. parmesan)	– 10 g to 200 g■ Cut the cheese into cubes.■ Process until it has been chopped to the required size.
	high Chocolate	– 50 g to 200 g■ Cut or break the chocolate into pieces.■ Process until it has been chopped to the required size.
	high Parsley	– 10 g to 50 g■ Process until it has been chopped to the required size.
	high Meat, liver (for mince, steak tartare, etc.)- 50 g to 500 g■ Remove bones, gristle and sinews. Dice the meat.Making sausage meat, stuffing and pâté:■ Put meat (beef, pork, veal, poultry, or even fish, etc.) together with other ingredients and spices into the bowl and mix into a dough.
	high approx.1.5-2min	Strawberry sorbet- 250 g frozen strawberries- 100 g icing sugar- 180 ml cream■ Put all ingredients in the bowl. Switch on immediately, otherwise the mixture will go lumpy. Mix until a creamy sorbet forms.
	low Beaten egg white- 2 to 6 egg whites■ Beat at a low speed.
	high Whipped cream- 200 g to 400 g■ Whisk at high speed.
	low/high	Mayonnaise- 1 egg- 1 tsp. mustard- 150-200 ml oil- 1 tbs. lemon juice or vinegar- 1 pinch of salt- 1 pinch of sugarIngredients should be at the same temperature.■ Mix all ingredients (except oil) for several seconds at setting 1.■ Switch appliance to setting 2, slowly pour oil through the feed tube and mix until the mixture emulsifies.Eat the mayonnaise immediately, do not store.
	high/M Nuts, almonds- 50 g to 200 g■ Remove shells completely, otherwise the blender blade will be blunted.■ Process until it has been chopped to the required size.
	high/M Puréeing fruit or vegetables- Apple sauce, spinach, carrot and tomato purée; raw or cooked■ Put ingredients and spices into the blender and purée.
	high Chocolate-milk- 80 g-100 g cooled chocolate- approx. 400 ml hot milk■ Chop up the chocolate in the blender, add the hot milk and mix briefly.

Tool Speed Time Recipes / Ingredients / Processing

M Honey and hazel nut spread (CNCM12C)

• 20 g hazelnuts
• 80 g blossom honey (room temperature)

- Put the nuts in the universal cutter jug and cut with the blender/cutting blade for 5 seconds on setting M.

■ Remove the universal cutter jug, turn it over and take out the blade insert.
■ Add the honey. Close the universal cutter jug again with the blade and put on the base unit.
■ Wait until all the honey has run down over the blade. Then mix everything for 5 seconds on setting M.

Fig. F shows guide values for the maximum quantities and processing times when working with the universal cutter jug and the blade inserts.

⚠️ Fare for skoldning!

⚠️ Fare for skolding!

QR code image containing encoded data, no visible human-readable text

(waste electrical and electronic equipment – WEEE).

Smart tool detection

(MCM3P...)

Thank you for buying a Bosch Home Appliance!

Register your new device on MyBosch now and profit directly from:

• Expert tips & tricks for your appliance
  • Warranty extension options
  • Discounts for accessories & spare-parts
  • Digital manual and all appliance data at hand
• Easy access to Bosch Home Appliances Service

Free and easy registration – also on mobile phones:

www.bosch-home.com/welcome

BOSCH HOME APPLIANCES SERVICE

Looking for help? You'll find it here.

Expert advice for your Bosch home appliances, need help with problems or a repair from Bosch experts.

Find out everything about the many ways Bosch can support you:

www.bosch-home.com/service

Contact data of all countries are listed in the attached service directory.

Valid within Great Britain:
Imported to Great Britain by BSH Home Appliances Ltd.
Grand Union House
Old Wolverton Road
Wolverton, Milton Keynes
MK12 5PT
United Kingdom