KS 401 BW - Saw Güde - Free user manual and instructions

USER MANUAL KS 401 BW Güde

Translation of the original instructions - Chain saw

100 dB (A) Measured sound power level L

114 dB (A) Measured according to

WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and

may increase above the level given in this information sheet. The vibration emission level may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. An accurate estimate of the vibratory load shouldalso take into account the times when the tool isshut down or when it is running but not actually inuse. This may signicantly reduce the vibratoryload over the total working period. Identify additional safety measures to protect theoperator from the eects of vibration such as:maintain the tool and the accessories, keep thehands warm, organisation of work patterns.28 ENGLISH

Read and understand the operating instructions before using the appliance. Familiarise with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties. In case of any doubts about connection and operation refer please to our customer center delivered items

Chain oil top-up funnel

Saw bar Specied Conditions Of Use The chainsaw may only be used for cutting wood – across the bres, with regard to the technical speci- cations and safety instructions. Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages. Use the appliance only outside, never use it in conned and bad ventilated areas. Requirements for operating sta The operating sta must carefully read the Opera- tingInstructions before using the appliance. Qualication: Apart from the detailed instructions by aprofessional, no special qualication is necessary forappliance using. Minimum age: Persons over 18 years of age can only workon the appliance.An exception includes youngsters trained in order to reachknowledge under supervision of the trainer duringoccupational education. Training: Sawing and felling, as well as all related work may only be carried, who is doing very educated and trained. Those who have no experience with the chainsaw or denArbeitstechniken, should not perform this work. First-time users are advised to practice cutting round wood on a sawhorse. The operator is responsible for accidents or risks to third parties. Residual risks Danger of injury ! Contact with the saw chain can cause casualties. Never touch moving chain by hands. Danger of kickback ! Kickback can lead to casualties. Danger of burns ! Chain and guiding groove warm up in operation. Risk of poisoning! Toxic exhaust fumes and oil vapors can cause poisoning. Emergency procedure Conduct a rst-aid procedure adequate to the injury and summon qualied medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. For the sake of eventual accident, inaccordance with DIN13164, a workplace has to be ttedwith a rst-aid kit. It isessential to replace any usedmaterial in the rst-aid kitimmedia- tely after it has been used. If you seek help,state the following pieces ofinformation:

3. Number of injured persons

Symbols Warning/caution! Read the Operating Instructions Wear eye protective goggles ! Wear ear protectors! Wear protective helmet ! Wear protective gloves ! Wear safety cut through resistant shoes with safety sole and steel toe !29 ENGLISH

Wear protective clothing with cut through resistant ply ! Warning against dangerous kickback Keep distance of persons! Observe to keep out of dangerous zone Fire danger: Prohibited smoking and open re using. Switch o the engine before any work on it. CE marking Protect against humidity This side up Safety Instructions

WARNUNG Read all safety warnings and all instructions. Failu- re to follow the warningsand instructions may result in electric shock, re and/or serious injury. Save all warnings and instructions for future reference.

Keep all parts of your body in safe distance from the saw when running. Before starting the saw, make sure the saw chain does not touch anything. A moment of inattention when working with the chainsaw is able to cause the saw chain to catch your clothes or parts of your body.

• Use your right hand to hold the chainsaw by its rear handle and your left hand to hold it by its front handle. Holding the chainsaw the opposite way increases the risk of injury and you must not do that.

Wear protective glasses and ear protectors. Further, wearing head, hand and leg protection equipment is recommended. Suitable protective clothing minimises the risk of injury by thrown- away wood chips and possible contact with the saw chain.

• Do not work on trees with the chainsaw.There is a risk of injury when working on a tree.

• Provide safe posture at all times and use the chainsaw only when standing on a solid, safe and level surface. A slippery or unstable surface, such as ladder, may lead to loss of balance or loss of control over the chainsaw.

• When cutting a tense branch, be sure to know that the branch will bounce back. If tension in the wood bres gets released, the tense branch may hit the operator and/or cause a loss of control over the chainsaw.

• Be especially careful when cutting scrubs and saplings. Thin material may get caught in the chainsaw and hit you or you may lose your balance.

• Carry the chainsaw by the front handle in a switched-o condition and the saw chain must be deected from your body. Fit a protection cover on the chainsaw whenever it is transported or stored. Careful chainsaw treatment reduces the likelihood of an accidental contact with the running saw chain.

• Follow the lubrication, chain tension and accessory equipment replacement instructions. A chain that is not tightened or lubricated in a professional manner may crack or increase the risk of backlash.

• Keep the handles dry, clean and with no oil and fat. Handles dirty with fat or oil are slippery and lead to loss of control.

• Wood to be cut only. Do not use the chainsaw for works for which it has not been designed – example: do not use the chainsaw to cut plastic material, masonry or building materials not made of wood. Using the chainsaw for works that are in conict with the designation may lead to dangerous situations. Backlash causes and prevention: Backlash may take place when the saw bar point touches an item or when the wood bends and the saw chain gets stuck in the cutting. In many cases, a contact with the bar point may lead to a situation when the operator unexpectedly bends backward and the bar is ejected upward toward the operator as a result. Sticking of the saw chain on the upper edge of the bar may throw the bar intensely o toward the operator. Each such reaction may lead to losing control over the saw and you may get seriously injured. Do not fully rely on the safety equipment tted in the chain

saw. As the chainsaw user, you should take various measures to be able to work without any accident and injury. Back impact is a result of an improper or wrong use of power tools. This can be prevented by appropriate preventive measures, as described below:

• Hold the saw rmly with both hands; clamp the chainsaw handle with thumbs and ngers. Position your body and arms so that you could absorb the back impact. If appropriate measures are taken, the operator is able to control the back impact force. Never drop the chainsaw.

• Avoid abnormal body posture and do not cut above the shoulder level. This will prevent a contact with the bar point and the chainsaw will be controlled better in unexpected situations.30 ENGLISH

Apply environment-friendly oil to all moving parts. After each use, clean the saw and sword chain careful- ly. Wipe it with a cloth moistened in oil or apply metal trea tment spray on it. Blunt, bent or damaged chains and swords must be replaced. Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insucient mainte

nance and care can lead to unforeseen accidents and injuries

If necessary, a list of spare parts can be found at www. guede.com. Machine to be stored in a dry place. Disposal The disposal instructions are based on the icons placed on the appliance or its package. Any damaged or disposed devices must be delivered to appropriate collection centres. Transport packaging disposal The packaging protects the machine against damage during tr ansport. Packaging materials are usually chosen based on environment aspects and waste treatment principles and are therefore recyclable. Re- turning the packaging into material circulation saves raw materials and reduces waste production. Parts of packagings (e.g. foils, styropor®) can be dangerous for children. Risk of suocation! Keep parts of the packagings out of reach of children and dispose them as soon as possible. Dispose the w aste oil in an environment-friendly manner! Guarantee Warranty period of 12 months applies to commercial use and 24 months applies to private use and com- mences on the day of purchase of the device. The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be sub- mitted for any claim in the guarantee period. The guar antee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.

• Spare bars and saw chains specied by the manufacturer to be used at all times. Wrong spare bars and saw chains may lead to chain overloading and/or backlash.

• Follow the manufacturer instructions for chain- saw sharpening and maintenance. Too low depth limiters incr ease the tendency to back impact. Observe national regulations and instructions for chain saws operation. Take care to prevent from fuel and oil leakage during transport. BThe dust that arises when working with this tool can be detrimental to health and therefore not reach the body. Wear a suitable dust protection mask. Other safety instructions Provide adequate lighting or good lighting conditions when working with the machine. Be careful when going backwards – risk of tripping! Do not run! Immediately remove cut branches/ knots from the work area to prevent injuries. Watch out for falling branches! The ON/OFF switch and safety switch must not be locked. Before using, check the tightness and proper seating of all screwed and socket joints and protective equipment and if all moving parts are moving smoothly. It is strictly prohibited to demount, adjust and alienate the protective equipment on the machine or put other protective equipment on the machine. Do not use the appliance if damaged or the safety equipment is defective. Replace any worn and damaged parts. Maintenance Switch the engine o and remove the socket plug before any work on the engine. Repairs and works specied in these Instructions may only be performed by qualied authorised sta. Use only original accessories and original spare parts. Biodegradable oil for chains to be used only. Keep the device, in particular the air vents, clean at all times. Never spray water on the device body! Never clean the machine and its components with solvents, ammable or toxic liquids. Us only a damp cloth making.31 ENGLISH

Important information for the customer Please be sure to know that returning the product in or after the warranty period must be made in the original packaging. Service Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureau- cracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Please enter it here for future reference: Serial No.: Art. No: Year of production: Tel.: [phone] / 700-360 Fax: [phone] E-Mail: [e-mail] Inspection and maintenance plan Generally Complete saw Plastic body Saw chain Chain saw bar Chain saw wheel Chain break Clutch Regularly clean the outer part Let regularly checked by authorized workshop Check for cracks and ssures Let regularly sharpen. Clean regularly Clean regularly Regular functional test Regular functional test (Chain can not move in idle run). Before any start-up Saw chain Chain saw bar Chain lubrication Chain break Follow-up brake ON/OFF switch Oil tank cap Check for damages and sharpness Check the chain tension Functional test Functional test Functional test Functional test Check for tightness In case damage let repaired in authorized workshop After every take out of service Chain saw bar Bar xture Clean the oil top-up opening Clean above all guiding oil groove storage Chain oil tank Saw chain / Chain saw bar Gesamte Säge Drain Dismount, clean and lubricate slightly by oil Clean the saw guiding groove Cleaned chain saw store safely in dry room - out of children reach. Let the chain saw checked by authorized workshop after long term storage (remaining oil can be resinous and clog the oil pump valve)32 Defects searching Defect Cause Failure removal The motor does not start 1. Put the operational switch to OFF position

4. Sooted spark plug (carbon residues on

electrodes), electrodes distance too big

6. Damaged spark plug contact, faulty

1. Put the operational switch to ON

2. Top-up fully the fuel tank

3. Reduce throttle, start couple times, in

case of necessity dismantle spark plug, clean and dry it

4. Clean the spark plug, check the plug

thermal value, possibly change the plug, set the electrodes distance to 0.6-0.7 mm

5. VLet the carburettor cleansed, blow

through by air in authorized workshop

6. let changed in authorized workshop

7. Check the switch-o button, cable and

ignition module, poss. Let replaced in authorized workshop, let adjusted gap to 0.3-0.4 mm Idle speed too high 1. Cold engine 1. Heat up slowly, poss. Close slightly choke Engine does not give max. output

1. Sooted spark plug (carbon residues on

electrodes), electrodes distance too big

4. Exhaust, exhaust channel of cylinder

7. Bad fuel/oil mix (too much oil)

1. Clean the spark plug, check the plug

thermal value, possibly change the plug, set the electrodes distance to 0.6-0.7 mm

2. Let the carburettor cleansed, blow

through by air in authorized workshop

4. Let the exhaust dismantle and clean

in authorized workshop, let clean the carbon residues

5. Let replaced in authorized workshop

6. Let replaced cylinders, pistons and

piston rings in authorized workshop, let the cylinders ground with end lap and let installed oversize piston

7. Fill the fuel tank according to the

(0.3-0.4 mm) let adjusted in authorized workshop Motor can not be swit- ched o

1. Light-grey spark plug with traces of

burning (melting pearls)

2. residues of carbon in the combustion

2. Let cleaned the cylinder head, piston

top and cylinder channels in autho- rized workshop