MXS101W - Blender PANASONIC - Free user manual and instructions

Brand	Panasonic
Model	MXS101W
Product type	Blender (hand blender)
Power supply	230-240 V ~ 50 Hz
Power consumption	120-125 W
Dimensions (Motor block + accessories)	6,5 x 7,4 x 42,3 cm (W x D x H)
Weight (Motor block + accessories)	0,80 kg
Beaker capacity	Approximately 700 mL (min. 100 mL)
Rated continuous operation time	1 minute
Power cord length	Approximately 1,3 m
Acoustic noise	58,3 dB(A) re 1 pW
Safety devices	Child lock, motor overload and overheat protection
Beaker material	Resin (plastic)
Included accessories	Blending attachment, beaker, anti-slip lid/mat, brush-spatula
Spare parts available	Beaker (ref. AND02E142)
Care and cleaning	Cleaning with soapy water, wiping the motor block with a damp cloth, dishwasher safe for some parts (except motor block)
Intended use	Household use only
Maximum ingredient temperature	60 °C

Frequently Asked Questions - MXS101W PANASONIC

How to assemble the blending attachment onto the motor block?

Align the ▲ symbol on the motor block with the ▲ symbol on the mixer socket, then turn clockwise until it locks. To disassemble, reverse the operation.

What is the maximum capacity of the beaker?

The beaker has a capacity of approximately 700 mL. Do not exceed the indicated level and do not fill beyond the height of the mixer handle.

Can I blend hot ingredients?

Yes, but the temperature must not exceed 60 °C. Pour hot liquid carefully as it may be ejected by steam.

How to clean the blender blades?

Use the provided brush-spatula to remove residues. Do not touch the blades with bare hands. You can also run the blender with soapy water for 15 seconds.

The unlock button does not work, what should I do?

Check that the child lock is deactivated (sliding button in unlocked position). The unlock button must be pressed before pressing the on/off switch.

What is the maximum continuous usage time?

The rated time is a maximum of 1 minute. After use, let the appliance rest for at least 10 minutes to avoid overheating.

What to do if the motor stops suddenly?

This may be due to overload or overheating. Unplug the appliance, remove some of the ingredients, and let it cool for about 30 minutes before reusing.

Which ingredients are not allowed?

Avoid very hard ingredients (coffee beans, ice cubes), frozen foods, fibrous meats, boiled tubers without water, and low-moisture ingredients (like dried beans).

Can I use the blender in a metal pot?

Yes, you can use metal or plastic containers. Avoid glass (even heat-resistant) as it may break.

How to store the appliance?

After cleaning and drying, attach the protective guard to the blending attachment, wrap the cable loosely around the motor block, and place it out of reach of children.

USER MANUAL MXS101W PANASONIC

Representative in EU:

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsberging 15, 22525 Hamburg, Germany

Panasonic Taiwan Co., Ltd.

http://www.panasonic.com

© Panasonic Taiwan Co., Ltd. 2017

1

MZ50G144
MX0617E0

Printed in China

Panasonic

Operating Instructions

Bedienungsanleitung

Mode d'emploi

Gebruiksaanwijzng

Thank you for purchasing the Panasonic product.

• Please read these instructions carefully to use the product correctly and safely.
• Before using this product please give your special attention to "Safety Precautions" and "Important Information" (Page GB3-GB6).
  This product is intended for household use only.
• Please keep this Operating Instructions for future use.
• Panasonic will not accept any liability if the appliance is subject to improper use, or in the event of failure to comply with these instructions.

Contents

Safety Precautions. .GB3
Important Information. .GB6
Part Names and Instructions.. .GB7
Preparation. .GB8
Handling Precautions.. .GB9
Prohibited Ingredients & Conditions.. .GB9
How to Use - Blender attachment. GB10
Cleaning & Care. GB12
Troubleshooting. GB13
Replacement Parts.. .GB15
Specifications . GB15

This symbol on the product indicates "Make sure you read the Operating Instructions carefully before using".

Disposal of old equipment

Only for European Union and countries with recycling systems

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products must not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment.
For more information about collection and recycling, please contact your local municipality.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

GB2 GB3

Safety Precautions

Please make sure to follow these instructions.

To reduce the risk of personal injury, electric shock or fire, please observe the following:
The following signals indicate the degree of harm and damage when the product is misused.

WARNING:Indicates potential hazard that could result in serious injury or death.
CAUTION: Indicates potential hazard that could result in minor injury or property damage.

The symbols are classified and explained as follows.

This symbol indicates prohibition.
This symbol indicates requirement that must be followed.

WARNING

To avoid risk of electric shock, fire due to short circuit, smoke, burn or injury.

Do not allow infants and children to play with packaging. (It may cause suffocation.)
- Do not disassemble, repair or modify this appliance. Consult the place of purchase or Panasonic service centre.
- Do not damage the mains lead or mains plug. Following actions are strictly prohibited: Mains lead Modifying, touching on or placing near heating elements or hot surfaces, Mains plug bending, twisting, pulling, pulled over sharp edges, putting heavy objects on top, bundling the mains lead or carrying the appliance by the mains lead.
- Do not use the appliance if the mains lead or mains plug is damaged or the mains plug is loosely connected to the household mains socket.
If the mains lead is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.

Safety Precautions

Please make sure to follow these instructions.

WARNING WARNING

• Do not plug or unplug the mains plug with wet hands.
• Do not immerse the motor housing in water, or splash it with water and/or any liquid.
• Do not put your face close to the beaker during use.

• This appliance shall not be used by children. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its mains lead out of reach of children.

• Make sure the voltage indicated on the label of the appliance is the same as your local supply. Also avoid plugging other devices into the same household mains socket to prevent electrical overheating. However, if you are connecting a number of mains plugs make sure the total wattage does not exceed the rated wattage of the household mains socket.

• Discontinue using the appliance immediately and unplug in the unlikely event that this appliance stops working properly.

e.g. for abnormal occurrences or breaking down
The mains plug and the mains lead become abnormally hot.
The mains lead is damaged or the appliance power fails.
The motor housing is deformed, has visible damage or is abnormally hot.
- There is crack on the beaker or other parts.
There is an unpleasant smell.
The blade units get stuck.
- There is abnormal turning noise while in use.
There is another abnormality or failure.
Contact Panasonic service centre for inspection or repair

• Insert the mains plug firmly.
• Dust off the mains plug regularly.
  Unplug the mains plug, and wipe with a dry cloth.
• Be careful if hot liquid is poured into the beaker as it can be ejected out of the appliance due to a sudden steaming.

CAUTION

To avoid risk of electric leakage, electric shock, fire due to short circuit, burn, injury or property damage.

• Do not use the appliance on the following places.

• On uneven surfaces, on carpets or tablecloths etc.

• Place where it may be splashed with water or near a heat source.

• Near any open water such as bathtubs, sinks, or other containers.

• Near a wall or furniture.
  Place the appliance on a firm, dry, clean flat worktop.

• Do not insert any object in the gaps.

• Do not replace any parts of the appliance with the spare parts other than this appliance genuine parts.

• Do not put your fingers, spoon or fork close to the blade while the appliance is operating.
• Do not blend or place over 60^ C ingredients into the beaker.
• Do not use the blender when the saucepan is on the heat source. Hot liquid may spurt out and touch on your hand.

Safety Precautions

Please make sure to follow these instructions.

CAUTION

• Make sure to hold the mains plug when unplugging it. Never pull on the mains lead.
• Beware not to be tripped over or get caught in the mains lead while in use.
  Care shall be taken when handling the blender blade, emptying beaker and during cleaning. Do not clean the blades by bare hand. Use the spatula brush provided.
  Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling, moving or cleaning.
• Switch off the appliance and disconnect from supply before changing attachments or approaching parts that move in use.

Important Information

• Do not use the appliance outdoors.
• Do not use the appliance for commercial purpose.
• Do not place the beaker on any heat sources or in a microwave.
• Do not drop the appliance to avoid damaging it.
• Do not wrap the mains lead around the motor housing.
  Make sure the attachments are set firmly.
• Do not use the appliance beyond the rated time.
• Do not operate the appliance without ingredients.

Part Names and Instructions

Motor housing
Control panel

Unlock button (section) Press the section.
Lock is released while the button is pressed. (When the trigger switch is pressed and rotation begins, the lock will not engage even if your finger is removed.)
Cannot be pressed when child lock is locked

Motor housing back
Trigger switch

Press the trigger switch while holding down the unlock button to start the machine. (P: G311)
The power will be "On" only while holding this switch.

Child lock

Be sure to lock in the following instances;
- taking a break from blending.
* carrying.
not in use.
attaching or removing attachments.
- The unlock button cannot be pressed while the child lock is locked.

Blender attachment
Blender housing

Protective holder

Use for placing or storing the blender temporarily.
For safety, it is attached to the blender at the time of purchase

Part Names and Instructions (continue)

Accessories

Beaker

Maximum volume: Approx. 700~mL 16 oz/2 cups

Minimun volume:

Approx. 100 mL, 4 oz/0.5 cup

Spatula brush

Brush

Clean the blades.

Lid/slip-proof mat

Can be used as a lid. (Clean it before using.)

-Spatula

For removing food

• Removes the food stuck to the blades.

Preparations

Before using, wash parts except the motor housing. (P. GB12)

• Make sure to handle according to the following Instructions. (Cleaning & Care see P.GB12-13)

Assembly and disassembly of attachments

Assembly of blender attachment

①Align the on the motor housing with the on the blender housing.

Twist the motor housing clockwise to align and to lock until it cannot be rotated.

Reverse the steps to disassemble blender attachment.

GB8 GB9

Handling Precautions

• Be sure to follow the rated time of each attachment. (P. GB15)
• For continued use, unplug and rest machine for at least 10 minutes until motor housing returns to a normal temperature. (Cause of smoke, odour or malfunction due to motor overheating.)

If the motor becomes hot from high load, repeated long use, insufficient rest time, or other factors, even if it is used within the rated time, the motor overheating protection function may be activated and the motor stops. (P.GB13-14)

Prohibited Ingredients & Conditions

Blending prohibited ingredients can cause damage to each attachment, beaker, and motor housing malfunction.

Blender attachment

■ Strong sticky ingredients

(Cause of malfunction)
- Boiled tubers*1
Potatoes, pumpkins, etc.)
- Okra
Chilled cream cheese*
Dough (bread, pasta, etc.)

Ingredients with rich fibers or

muscles (Cause of malfunction by trapping fibers or muscles around the blender blade.)
Meats (Includes chopped meat)
Fishes

Hard ingredients

(Cause of blade damages)
Coffee beans
Dry bread
- Frozen food
Ice cubes
Dried soybeans
- Turmeric

Low moisture content ingredients (Cause of malfunction)

• Boiled tubers*
  Boiled beans
  (Kidney beans, butter beans, etc.)

1 Can be used by adding the same amount of water as ingredients.
2 Can be used when the ingredients are in room temperature (approx. 25°C).

How to Use -Blender attachment

Preparations

Cut soft ingredients into 2-3 cm cubes.

Citrus

[Peel and] separate.]

Apple

Remove core and peel skin if desired.

• Remove pit from peaches, plums and other stone fruits.

Cut hard

Ingredients Into 1 cm cubes.

一、募集资金基本情况

(Cool)

If pieces are too big, they cannot be mixed well.

■ Wash

etables well and cut into 2-3 cm width pieces.

• Remove the stem endroot, then wash well before use. (Spinach, etc.)

Remove large stems from ka

Notes

a container or a pan that can be used with the blender. Hold the container firmly while in use.

Can use Cannot use

Beaker

Metal or plastic

containers or pan.

Do not make contact

with the rim or the bottom of container to avoid damaging it.

Glasscontainers

(Including fees)

resistant and

strengthened glass.)

Ceramicand

earthenware containers and pots

that are easy to break.

Liquid level

mark

• Do not use continuously for longer than 1 minute. (Cause of malfunction: P. GB9)

Follow the quantities that can be made in 1 batch.

Blend shaft
- Do not add ingredients that exceed the height
of the blender shaft.
- When adding liquid, follow the chart to the right.
Depending on the type and quantity of ingredient, mixture may spill from the be reduce the quantity.
Do not insert or remove the blender from the beaker, etc. while trigger
switch is pressed. (It may cause injury and/or burn.)
Attach blender attachments firmly. (P, GB8)

Preparation:

① Attach blender attachments to motor housing. (P. GB8)
② Insert mains plug into mains socket.
③ Unlock child lock.

Unlock child

1

Insert blender into container.

2 Press trigger switch while holding down unlock button to start.

• Mix while pushing blender blade into the ingredients. (Do not push hard.)
  Hold beaker firmly so it does not lift up.
  Insert blender directly downwards when using beaker.
• When ingredients stick to the container and is difficult to move, release trigger switch and reapply to ingredients. Then, restart again.
• Do not lift blender blade above the surface of liquid ingredients while in use. (Risk of splattering.)
• When handling in a pot or bowl, swirl the liquid at a slanted 5 - 10mm without removing blender blade from the liquid. This will mix ingredients more smoothly.
  If device stops during use, see P. GB14.

3 When finished, release trigger switch and放手，child leaves.

Confirm that rotation has stopped, then remove blender from container.

The blender can be placed on the protective holder temporarily.

Lock child

lock

After Use

Unplug the mains plug.
- Remove blender attachments and clean them. (P. GB12-13)

Cleaning & Care

Unplug before cleaning.
Clean the machine after every use.

Notes for Cleaning

• Be careful not to directly touch blades with your hands.
• Do not use benzine thinner, bleach, nylon face of sponge, metal brush,
  polishing powder, etc. (Otherwise, the parts surface will be damaged.)
• Do not use chlorine type detergents. (Cause of rust and breakdown.)
• Be sure to dry well after washing. (Risk of rust)
  Dry blender blades with blades pointing downwards.
• Do not clean the machine and attachments with a metal pointed object.

Notes for Storage

• Keep the machine out of
  reach of children.
  (Avoid personal injury.)
• Attach protective holder to the blender.

About Resin Parts Discolouration

Resin parts' may become discoloured through contact by the staining compounds in carrots and other vegetables. This discolouration cannot be fully removed with a sponge, but it poses no problem to use. Early cleaning after use can reduce discolouration.

* Blender housing, beaker, protective holder

Blender attachment

① Pour approx. 200-300 mL of water into the beaker.
② Run the blender for approx. 15 seconds. (P. GB11)

Do not move up and down,

otherwise, water may spill
③ Replace water and repeat several times.
After removing leavings, wash with the spatula brush.

Blender housing

• Remove ingredients trapped between metal parts with the spatula brush. If cannot clearly clean, try to use a non-melallic pointed object (made of wood is recommended). (Do not touch rubber portion.)

Motor housing Other Pa

Wipe with a well-wrung cloth.

Water entering the inside of the machine can cause malfunction.

Motor housing

Wash with diluted dish detergent

(neutral).

Use a soft sponge to clean lid/slip-proof
mat.

Lid/slip-proof mat

Wash it after removing from

beaker

Use of Dishwasher and Dish Dryer

SafeUnsafe

×

Motor housing Blender attachment Beaker
X	√	√	√	X

• Use a detergent intended for use with a dishwasher machine. (Use after thoroughly referring to the user manual accompanying your dishwasher.)
• The beaker may become fragile. Distance these items from the healing element, and set temperature to low if using a model with heat control.

Troubleshooting

Please check following points before calling or arranging for repair.

Problem C

Button cannot be pressed.

and Action

Child lock does not unlock. (P. GB7)
Did not hold down the unlock button beforehand. (P, GB7)

Does not operate even when button is pressed.

1
The mains plug is disconnected with the socket. Securely insert it.
- Motor overheats, activating the motor overheating protection function.

Unplug and rest the machine for approx. 30 minutes or more (until motor housing returns to a normal temperature) to release overhealing protection before using again. If the machine still does not operate, consult the store of purchase or Panasonic service centre.

Large vibrations

Did not follow the indicated Ingredient portion for 1 batch. (P.GB10)

• Did not prepare the ingredients to the indicated sizes.
  (P.GB10)
• Ingredients are hard.
  Remove the hard ingredients.

The blade gets stuck.

Unplug and remove ingredients trapped between metal parts with the spatula brush. If cannot clearly clean, try to use a non-metallic pointed object (made of wood is recommended). (Do not touch rubber portion.)

Troubleshooting (continue)

Please check following points before calling or arranging for repair.

Problem Ca

There is abnormal noise.

Motor housing becomes hot.

Operation stops abruptly.

and Action

Ingredients are hard.
Remove the hard ingredients.

Use beyond rated time.

Use within rated time (P, GB15). For continued use, unplug and rest machine for at least 10 minutes until motor housing returns to a normal temperature. (Motor overheating causes malfunction.)

Motor overloading protection is activated due to overload.

If blender is pressed strongly against ingredients, release trigger switch and unlock button, unplug the machine, then reinsert to operate again. (P. GB11)
Do not press blender forcefully into ingredients.
For circumstances other than the above, perform the following steps while the blender is stopped.

Release trigger switch and unlock button, then remove motor housing from the container.

(2)Unplug the mains plug
Remove half of the ingredients or add water.

• If prohibited ingredients were added, remove them.
  ④ Repeat preparation and operation (P. GB11)
  Do not press blender forcefully into ingredients. (If machine still does not operate after performing the above.) motor overheating protection has been activated. See below Motor overheating protection function activated from motor overheating during or after use.
• Unplig and rest the machine for approx. 30 minutes or more (until motor housing returns to a normal temperature) to release overheating protection before using again. (If machine still does not operate, consult the store of purchase or Panasonic service centre.)

Release

Problem Ca

Ingredients do not mix well.

Poor finished product.

and Action

Did not follow the indicated ingredient portion for 1 batch. (P.GB10)
Did not prepare the ingredients to the indicated sizes. (P.GB10)
Ingredients are hard.
Remove the hard ingredients.
- Operating time is short
Lengthen operating time, but not exceed the rated time of
continuous operation

The blade is damaged.
Stop using and contact the store of purchase or Panasonic service centre.

Replacement Parts

Replacement parts are available at your dealer or Panasonic service centre.

Part Name Part Number

Beaker(exclude lid/slip-proof mat)AMD02E142

Specifications

Power Supply 230 - 240 V	~ 50 Hz
Power Consumption 120 - 125 W
Rated Time (continuous operation) 1 minute
Safety Device	Motor overloading protectionMotor overheating protection
Length of Mains Lead (approx.) 1.3 m
Dimensions (approx.)Motor housing + Attachments (W × D × H)	6.5 × 7.4 × 42.3 cm
Mass. (approx.)Motor housing + Attachments	0.80 kg
Airborne Acoustical Noise	58.3 [dB(A) ref 1 pW]

m = 311

Netzstecker

m = 311

Deverrouillez ver

rovillace infants

Specifications.. .NL15

WAARSCHUWING WAARSCHUWING

m = 311 ;

Kan won

1

Metaal of plastic bak of pan.

Geen contact makes me of rand of it.

Motorbehaving word to heet

Operatiestoptoplotseling.

ak en Actie.

m = 311

m : x = 1 或 3x + 4y + 1 = 0

1 + 21 - 21 + 1 - 21 - 21

法

图

（）

特此公告。

m - 1 0 ;

Problem O

N
m = 311 ;
m = 311
m = 311

Sam for at reogore apparate

after hvr brg

Fejlfinding (fortsat)

Kontroller falgende punkter, inden du ringer aller arrangerer for reparation.

Problem Ar

Der er unnormal stoj.

Morkabinett bilver varmt.

Operation standser pludeight.

6g handling

Ingreidiense er harde.

Lock/halksaker matta

Lock/halksaker matta