SRHK 1600 A1 - Uncategorized SILVERCREST - Free user manual and instructions

USER MANUAL SRHK 1600 A1 SILVERCREST

WENN SIE DIESES PRODUKT

Hertz (supply freqency) CAUTION! This symbol with the signal word “Caution” indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.

Watt Protection classII (double insulation) NOTE: This symbol with the signal word “Note” provides additional useful information. Do not use this product near bathtubs, showers, basins or other vessels containing water. Use the product in dry indoor spaces only. CE mark indicates conformity with relevant EU directives applicable for this product. Safety information Instructions for use TRAVEL HAIRDRYER Short manual This document is a shorter printed version of the complete instruction manual. Scanning the QRcode takes you straight to the Lidl service website (www.lidl-service.com) where you can view and download the complete instruction manual by entering the article number (IAN)444847_2307. The short guide forms an integral part of this product. Prior to using the product, familiarize yourself with all operation and safety notes. Store the short guide in a safe place, and if you give the product to third parties, all documentation should be passed on to them as well. Intended use This product is designed to dry and style human hair. The product must not be used on artificial or animal hair. Do not use the product for any other purpose. The product is only intended for use in private households and while traveling. The product is not suitable for commercial purposes. The manufacturer accepts no liability for damages caused by improper use. Scope of delivery 1 Travel hairdryer 1 Concentrator nozzle 1 Short manual15GB/IE Parts description [1] Air outlet[2] Concentrator nozzle[3] button (cooling mode)[4] Handle [5] 0/I/II switch (on/off, air flow and heat control) [6] Mains cord and mains plug[7] Hanging loop[8] Dual voltage selector[9] Foldable joint[] Air inlet Technical data Input voltage: 120/230V∼, 50/60Hz Power consumption: 1200/1600W Protection class: II/ Safety instructions

YOURSELF WITH ALL OF

THE SAFETY INFORMATION

AND INSTRUCTIONS FOR

USE! WHEN PASSING THIS

PRODUCT ON TO OTHERS,

ALSO INCLUDE ALL THE

DOCUMENTS! In the case of damage resulting from non-compliance with these operating instructions the warranty claim becomes invalid! No liability is accepted for consequential damage! In the case of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions, no liability is accepted!

OF LIFE OR ACCIDENT TO

INFANTS AND CHILDREN! Never leave children unsupervised with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers. Always keep children away from the packaging material. This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be made by children without supervision.16 GB/IE

WARNING! Misuse may lead to injury. Use this product solely in accordance with these instructions. Do not attempt to modify the product in any way.

DANGER! Risk of electric shock! Never attempt to repair the product yourself. In case of malfunction, repairs are to be conducted by qualified personnel only.

WARNING! Risk of electric shock! Do not immerse the product in water or other liquids. Never hold the product under running water. Do not drop the product to avoid damage to the product. To prevent the product from overheating, never block the air inlet and air outlet during use.

WARNING! Risk of electric shock! Never use a damaged product. Disconnect the product from the power supply and contact your retailer if it is damaged. Before connecting the product to the power supply, check that the voltage and current rating corresponds with the power supply details shown on the product’s rating label. Regularly check the mains plug and the mains cord for damages. If the mains cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Protect the mains cord against damages. Do not let it hang over sharp edges, do not squeeze or bend it. Keep the mains cord away from hot surfaces and open flames. For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.17GB/IE The use of extension cords is not recommended. If the use of an extension cord is necessary, it must be designed for a current flow of at least 10 A. Lay cords in such a way that they may not be tripped over or otherwise damaged.

WARNING! Risk of electric shock! Do not use this product near bathtubs, showers, basins or other vessels containing water. The product must not be left unattended while it is connected to the supply mains. Do not operate the product with wet hands or while standing on a wet floor. Do not touch the mains plug with wet hands. Do not pull the mains plug out of the electrical outlet by the mains cord. Do not wrap the mains cord around the product. Protect the product, its mains cord and mains plug against dust, direct sunlight, dripping and splashing water. Switch off the product before –changing attachments, –cleaning, –disconnecting the product from the power supply. When the product is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the product is switched off. No action is needed from users to shift the product between 50 and 60 Hz. The product adapts itself for both 50 and 60 Hz. Incorrect setting of the dual voltage selector will damage the product. Do not use any attachment which is not provided by the manufacturer. Before first use NOTE: The product may give off some odour during first use. These are production or transport residue that will quickly subside. o Remove the packaging. Check if all parts are complete. Operation Unfolding the handle (Fig. E) NOTE: Do not switch on the product if the handle[4] is still in position a or b. o Unfold the handle [4] until the foldable joint [9] engages in position c.18 GB/IE Setting the voltage (Fig. B, C) NOTE: Required tool for setting the voltage: Flat-head screwdriver Dual voltage selector[8] Voltage Turn clockwise 120V∼ Turn counter-clockwise 230 V

Drying hair (Fig. D)

1. Before connecting the product to the mains supply: Set the

dual voltage selector[8] to the voltage suitable for your current location.

2. Connect the mains plug [6] to a suitable mains outlet.

5. Disconnect the mains plug [6] from the mains outlet.

6. Let the product cool down completely.

NOTE: In the event of overheating, the product switches off automatically. In this case, slide the 0/I/II switch[5] to position0 and disconnect the mains plug [6] from the mains outlet. Styling hair (Fig. F) Using the concentrator nozzle

CAUTION! Risk of burns! Do not touch the air outlet[1] when the product is switched on and the air outlet is still hot. Do not touch or remove the concentrator nozzle[2] when it is still hot. NOTE: We recommend to use gentle air flow and low heat level when styling hair.

1. Attach the concentrator nozzle [2] to the air outlet [1].

Rotate the concentrator nozzle to adjust its orientation, if necessary.

2. Switch on the product. Use the concentrator nozzle [2] to

direct the air flow onto a specific section of the hair.

3. Removing the concentrator nozzle[2] from the air

outlet[1]: Pull the concentrator nozzle off with a downward motion. Using the cooling mode NOTES: After styling the hair: Use the cooling mode to make the hairstyle last longer. The cooling mode can only be selected when the product is switched on. o Use the button[3] to switch the cooling mode on or off: button[3] Cooling mode Press and hold o Switched on o The product emits a cool air flow. Release o Switched off o The cool air flow stops. Ionisation function Ions are continuously applied to the hair. This reduces the static loading of the hair and improves its stylability. The hair becomes soft, smooth, glossy, and easier to style. NOTE: We recommend the use without attachments for the optimum activity of the ions. Cleaning and care

WARNING! Risk of electric shock! Always switch off the product and disconnect the mains plug [6] from the mains outlet before cleaning the product. Do not immerse the product’s electrical components in water or other liquids. Never hold the product under running water.

ALS U DIT PRODUCT AAN

OBSLUHE! KEĎ BUDETE TENTO

TRANSFIERE ESTE PRODUCTO,