AquaRite Flo Advanced NG - Water pump HAYWARD - Free user manual and instructions

USER MANUAL AquaRite Flo Advanced NG HAYWARD

Cellule de crocylose
Connecteur de la cellule
Support de cellulose
Detector ou detigaz (interné)
1. Is there a rule to do the same and do it 15000 times?
2. Is there a rule to do the same and do it 1500 times?
3. Do you know how many rules are in the book?

Product Concentration maximum g CIm
AGR-FLO-AD38NG 65W 8
AGR-FLO-AD16NG 120W 16
AGR-FLO-AD22NG 130W 22
AGR-FLO-AD33NG 150W 33
AGR-FLO-AD50NG 180W 50
ADR-FLO-AD90L SNG 80W	Equr 5
AGR-FLO-AD1LSNG	120W	Equr 15
AGR-FLO-AD2LSNG	150W	Equr 30
AGR-FLO-AD3LSNG	150W	Equr 45

FLO Advanced NG

3b. Installation murale

Electrolyte / Hydrolysis
Hydrolysis of electrolytes / hydrolysis

Nivaasa: Production of nitro (a) is suitable for blocky electrolyte solutions. Nivaasa is suitable for hydrolysis

Choo:
Fludio: koree jordan
Kor: koree jordan
Insege: koree jordan
a: koree jordan
programme: Fandis et al.
Pendings: Kjeldsen
Roos: Laetex objective

paae aae paaee ae eae aae

c0000000000000000000000000000000000000000000000000000000000

Mode Projeetur LED:

purni are coning news are frequencies , cuntheme . 2018 in 2 , 2018 , 2018 , 2018 ,

2017年1月1日

wic (mssesrgs uarg) sals (alms the fonnnnneepoie fibres (chuee ie in fibres)

Mot do passse

1970s in 36 paxen 2004 1970s in 36 paxen 2004

info temps

aayaae aae aee eae

RENSSPRESIS 1500000000000000000000000000000000000000000000000000

Info System:

nannnnn nnnnnn nnne nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnn

nereasat a conuorodce is cornebrion. WiliD

Ecalonnage Rr
Ebnnana de a sorda Rocce: recormane fo 2 mas pondant la saoe d'olion de la pina.
Tompson
Findings: Inference within languages can be limited to the language of 250Kb . However, it is possible to use a computer to perform the task. However, linguistic consequences are unknown.
Result 1. Result of a Rosal Calo effect on the Strobomans effect: probabilitaion:

Manuscript:

Santo sent her on de' fato, auseo, zao: la doce thebocu pesus. And she said, "I am a good man and I am a good man." She said, "I am a good man and I am a good man."

I not possible to decide on the date of publication in the temperature of the human body, as does the description of a 2°C temperature. I have to refer to the times of my article at the 1st June 2003. I do not plan to make any changes.

Network
Line is a form WIFI Connection, which solves the problem. Line is a new, Configurable, (no) field table approach.

After some configuration of applet's up on OS

Abe chen huanme Sardn at appner sur CK

Is this the case? Contactor vors Inaktifzahlt

A. A. A. A. B. C. D. E. F. G. H. I. J. K. L. M. N. O. P. Q. R. S. T. U. V. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W. W.

Chickie is doing some clappys on Chuknow.

Histology culture: A. histolytica, a subsp. histolytica, is a Gram stain positive and is also a virus-specific.

HAYWARD

10. CONDITIONS DE GARANTIE ET EXCLUSIONS POUR LES PAYS DE L'UNION EUROPEENNE

KEEP THIS GUIDE FOR FUTURE REFERENCE

HAYWARD

WARNING: Electrical hazard

Failure to comply with these instructions can result in serious injuries or death.

THE EQUIPMENT IS INTENDED TO BE USED ONLY IN SWIMMING POOLS

WARNING - Carefully read the instructions that appear in this manual and on the device. Failure to comply with the instructions can cause injuries. This document must be given to every pool user, who should keep it in a safe place.
WARNING - Disconnect the equipment from the mains supply before any intervention.
WARNING - All electrical connections must be carried out by a qualified approved electrician in accordance with the standards currently in force in the country of installation or, failing this, in accordance with the international standard IEC 60334-7-702.
WARNING - Check that the device is plugged into a power outlet that is protected against short-circuits. The device must also be powered via an isolating transformer or a residual current device (RCD) with a nominal operating residual current not exceeding 30mA .
WARNING - Ensure that children cannot play with the device. Keep your hands and any foreign object away from openings and moving parts.
WARNING - Check that the supply voltage required by the product corresponds to the voltage of the distribution network and that the power supply cables are suitable for the product power supply.
WARNING - Chemicals can cause internal and external burns. To avoid death, serious injury and/or damage to equipment, wear personal protective equipment (gloves, goggles, mask, etc.) when servicing or maintaining this device. This device must be installed in an adequately ventilated place.
WARNING - The unit must not be operated when there is no water flow in the cell.
WARNING - The cell must be located in a well ventilated environment so hazardous accumulation of hydrogen gas does not occur.
WARNING - To reduce the risk of electric shock, do not use an extension cable to connect the device to the mains. Use a wall socket.
WARNING - Use, cleaning or maintenance of the device by children over 8 years of age or by people with impaired physical, sensory or mental capacities, or a lack of experience or expertise, should only take place once they have received appropriate instruction and under adequate supervision of an adult who is responsible for them, to ensure the device is handled safely and avoid all risk of danger. This device must be kept out of reach of children.
WARNING - Use only original Hayward® parts.
WARNING - If the power supply cable is damaged, it must be replaced by the manufacturer, the after-sales service or similarly qualified persons to avoid danger.
WARNING - The device must not be used if the power cord is damaged. An electric shock could occur. A damaged power cord must be replaced by the after-sales service or similarly qualified persons to avoid danger.

FLO Advanced NG AquaRage 2 on 20 Page 3 on 20AquaRite

Only use spare parts supplied by Heyward brand

HAYWARD

INDEX

1.Description of the device
2. Pack contents
3. Installing the device

3a. General view of installation and electricity use
3b. Installation on a wall
3c. Connecting the electronic circuit board
3d. Cabling the box
3e. Installing the cell and the mechanical flow switch

1. Operation of the device

4a. View and description of the home screen
4b. Electrolysis / hydrolysis menu
4c. Filtration control
4d. Control and power supply for lighting
4e. Configuring the box

1. Connecting and configuring the options

5a. Installation and start-up of the pH option
5b. Installation and start-up of the Rx option
5c. Installation and start-up of the temperature option
5d. Installation and start-up of WiFi module

6.Description of messages / alarms

1. Chemical equilibrium of the water
2. Troubleshooting guide

9.Appendices

9a. Configuring the cell safety feature
9b. Connecting and configuring a variable-speed pump

1. Warranty conditions and exclusions for European Union countries
2. Environmental information

FLO Advanced NG

Only use spare parts supplied by Hayward brand

HAYWARD

1.DESCRIPTION OF THE DEVICE

The Aquarile' Flo Advanced NG device is a water treatment system combined with a pool equipment control device.

Control system:

The salt chlorinator AquaRite Flo Advanced (LS included) centralises disinfection and management of key pool equipment by optimising their interactions. It is a chemical water treatment system, water disinfection system, and automatic pH regulator. This device also controls the single-speed pumps, variable speed pumps, lighting up to 50W, and the water temperature. Remote management is possible using the WiFi or Ethernet options.

Water treatment

AquarRite Flo Advanced: Chlorine is produced by electrolysis of water at a low salt concentration. The electrolysis cell produces sodium hypochlorite (liquid chlorine) starting at 3g of salt per litre. The chlorine combats and eliminates the bacteria, viruses and pathogenic agents, and oxidises the organic matter present in the water. The sodium hypochlorite used recombines into salt after a few hours.

AquaRite Flo Advanced Low Salinity: It is an effective water treatment method for your pool that uses electrolysis and hydrolysis of salt water. To operate, the salt chlorinator requires a very low concentration of salt (1.5 g salt per litre) in the pool water. The cell produces sodium hypochlorite (liquid chlorine) and free radicals with more powerful disinfection capabilities than sodium hypochlorite. The chlorine and the free radicals combat and eliminate the bacteria, viruses and pathogenic agents, and oxidises the organic matter present in the water. The sodium hypochlorite used recombines into salt after a few hours.

Power supply 220-230V 50-80Hz
Cell connection
- Options connections - pH and Rx probes connections

Electrolysis gel

Calcony
Cal
Eooonnnnne nner (nttnr)
10
The value of the call is 10,056 h under optimal conditions of case See fire chapter on chemical water balance

2. PACK CONTENTS

Box

Electrolysis cell

3/4 inch flow switch

4 anchors.

4 wall mounting screws.

4 keyhole hangers.

4.

Drilling template

Cable gland
（x2）

Owner's Manual accessible via QR code

FLO Advanced NG AquaRage 4 on 20 Page 5 on 20AquaRite

Only use spare parts supplied by Hayward brande

HAYWARD

3. INSTALLING THE DEVICE

3a. General view of installation and electricity use

Maximum consumption and generation

Use of a 16 A time-delay circuit breaker is recommended for the box.

Product Maximum consumption g Cth
AGR-FLO-AD38NG 65 W 8
AGR-FLO-AD16NG 120 W 16
AGR-FLO-AD22NG 130 W 22
AGR-FLO-AD33NG 150 W 33
AGR-FLO-AD50NG 180 W 50
ADR-FLO-ADXL5NG 80 W Equiv 5
AGR-FLO-AD1LSNG 120 W	Equiv 15
AGR-FLO-AD2LSNG 150 W	Equiv 30
AGR-FLO-AD3LSNG 190 W	Equiv 45

FLO Advanced NG

Only use spare parts supplied by Hayward brand

HAYWARD

3b. Installation on a wall

Without opening the lid, screw the 4 keyhole hangers to the back of the box.
- Locate the position of the 4 keyhole hangers using the drilling template. - Drill 4 holes in the wall and insert the 4 anchors into them.
Screw the 4 mounting screws to the wall and hang the device vertically with the cell connector positioned at the bottom.

The box must be installed in the plant room (dry, temperate conditions, ventilated). Take care, acidic vapour can irreversibly damage your device. Take this into account in the positioning of the treatment product storage containers. Unplug the pool filter pump before you begin the installation. The installation must be performed in compliance with the regulations in effect in the country of installation. The box must be installed at a minimum horizontal distance of 3.5 metres (or more, if local legislation requires it) from the pool, at less than 1 metre from a protected socket, and at less than 4.5 metres from the planned position of the cell. The box must be installed vertically, on a flat surface, with the cables orientated downwards. Given that the box is also used for evacuating heat (heat dissipation from the internal components), it is important for space to be left around the four sides of the box. Don't mount the box behind a panel or in a closed environment. Before you fix the control box in place in the planned position, check that the power supply cord reaches the protected socket and that the cell cable reaches the planned cell installation position. All metal pool components can be connected to the same earth in accordance with local regulations.

3c. Connecting the electronic circuit board

Connect the sensors with great care.

A bad connection may irreparably damage the device.

HAYWARD

Connection of inputs:

Board Label Description Terminals Input / output type
Main "C" tempera	stare probe A-B	Rec. yellow, black
Main	COVER/ AUX	Closed shutter defector	D-F	Dry contact
Main	H1/Y/LOW SWITCH	Mechanical flow switch	E-F	Unplanned dry contact
Main	SLAVE	Terminal for master or slave unit	G-F	Dry contact
Main	PH	Particulate or electromagnetoal closing pump	H-I	Output voltage 230 VAC 5 A max
Main	FILTER PUMP	Filtration pump control	J-K	Dry contact
Main	LIGHT 50W	Control end power supply for lighting	L-M	Output voltage 12 VAC 50 W max
Main	VARIABLE SPEED PUMP	Control of variable speed pump	N-O-P-O	Dry contact V1~V2~V3~Common
Main SCREEN	Remote screen (option)		R	Modbus RS465 Port plug to bottom left/ right/paper/green/black
Main	WHI	WHI or Ethernet module (as an option)	S	Modbus RS465 Port plug to bottom left/ right/paper/green/black
Main	EXTERN	Standard communication connector	T	Modbus RS465 Port plug to bottom left/ right/paper/green/black
Main	PH	pH chip connection, annotation and LED on the left	U	S VDC
Main	RX	TX chip (optional) connection, annotation and LED on the left	V	S VDC

3d. Cabling the box

FLO Advanced NG AquaRage 6 on 20 Page 7 on 20AquaRite

Only use spare parts supplied by Hayward brande

FLO Advanced NG

Only use spare parts supplied by Heyward brand.

HAYWARD

3e. Installing the cell and the mechanical flow switch

A

The installation has 2 safety features: the mechanical flow switch and the gas detector in the cell.

#

If the device is being installed with 50mm diameter pipework, please consult the spare parts sheet for the gluable adaptor fittings.

Installing and connecting the cell (see diagram):

• Install the cell mount vertically (if it is installed horizontally, please read the technical information sheet appendices to correctly adapt the box programming).
  Install the cell in a bypass.
• Connect the power supply cable underneath the box using the 4-pin socket, and the gas detector to the RCA socket.

Installing and connecting the mechanical flow switch:

Install the flow switch mount before the cell and on the bypass.
- Screw the flow switch onto the 1 / 4 male thread.
- Connect the red and black cables to the electronic circuit board terminals and

HAYWARD

The device is designed to be permanently plugged in to a protected socket. The AquaRite Flo Advanced must not be unplugged except to carry out pool equipment maintenance or if the pool must be closed (wintering).

When the water parameters are within the recommended ranges, you can start up the device.

4a. View and description of the home screen

4b. Electrolysis / hydrolysis menu

Tfiehioe moed woud be uorinir for the stechtonso to hou on

Electrolysis / Hydrolysis: Phase 1. Hydrolysis of 7-hydroxy-2-cyclohexane.

Laval Production of erlotinib (ph) dose for docetaxel, cyclophosphamide (ph) dose for hydralazine

Shock treatment:
Continuous fixation for 24 hours at maximum intensity.
Recovery of the patient's blood pressure.
During the shock treatment, RitecX cannot be used.

Cover: Rucidianin chitinone production under the cover of the article. When the cover is closed, it is not necessary for the electrolytes to operate in the presence of the reaction on chitinone production.

HAYWARD

4c. Filtration control

Connection of the filtration pump

Toornnnd and crigfes vavlth speed pany, plonr used the appendix to the htnrind information shad

Thermal circuit-breaker? Switch

Filtration: Configuration of central filters. To configure it, select Filtration and confirm by the current configuration can be selected on the Mode box using the paste button.

Manual Mode: Enables the Strobe to be operated manually or off manually without time control. The Strobe is operated manually. Strobe parameters are tuned on See Note for Filter cleaning

Automatic (or temporised) mode In this mode, the filtration runs according to the programmed time frames, which allow the filtration to be performed in a single time. The time frame must be defined within one day. Configuration of the start and stop times can be used to select the appropriate time for the first and last time when you wish to modify (1-3) using the update keys. Use the plausibility buffers to increase the start/stop time field of the selected time frame. Configure this time field to be either "start" or "stop". Use this plausibility buffer to increase the matrix field and configure it using the plausibility buttons. To confirm press OK, and to detect press out, the results are processed in the same way for configuration of the end time.
The time frames must not overlap.

Filter cleaning (and pool cleaning by suction) made from this metal (available from any filtration media).
1. Remove the filter paper from the mesh and the sand fiber.
2. When you activate this mesh, the electrodes cells decomposed. I follow these instructions carefully.
3. Apply pressure DFT using the 'platinum' button.
4. Set the filtration pump valve to the backwashing mode.
Set the filtration pump to ON. You can monitor the time elapsed for the best washing using the watch on the screen. More time than the filter washing is performed correctly and in full.
Hilar psoas and return value 24 to 25 Hilar sacroiliac. If you want, you can enter portion a million in the form of a dollar.
Proocd is the same way as for necbawhng, the time
Exit the File Clearing mode using the back button. The system then returns to the programmed mode.

HAYWARD

4d. Control and power supply for lighting

Output 12 VAC (50 W max.). Direct connection of the LED spotlights. No need to use an Independent transformer.

When the light is activated the color production is reduced by 103.

Lighting:
Manual Mode: The limits frames must be defined within one step.
Automate Mode: turn on according to the time frame, which allow the kicking start and以免 the need to be adjusted. The time frame can be configured with a functionality that is calvery, every other day, every week, every 3 days, every 5 days, weekly, every 2 weeks, every 3 weeks, 4 weeks.

Led Spotlight Mode:
The time frames must be chosen within one day.
The time frames must be chosen to allow for each block to the lighting start and end times to be adjusted. The time frames can be configured with a frequency that is 60, every other day, every 2 days, every 3 days, weekly, every 2 weeks, every 3 months, a week.

4e. Configuring the box

Language: setting of the preferred language.
Date time: setting of the day and time.
Screen: setting of screen lighting intensity (0-100%) and programming of on/off times.

Sound: programming of the sound crosster system for the
sound production, general stereo, average (target messages) also (specialist material, stereo (staf. filtration).
Sound access to the user menu can be protected with a password Key in a combination of 5 binary and the system will remember them. If you forget your password, the system will send the "new-passport" from your银行卡 to your supplier.

Time info:
the system registers the squared hours of operation of the card and displays this value on this screen. The system also tracks components to the number of counter records.
System info:
information about the available software version of the system and the power module. The module required for configuration of the system WIR connection is also indicated.

HAYWARD

5. CONNECTING AND CONFIGURING THE OPTIONS

5a. Installation and start-up of the pH option

Open the lid, and connect the pH CHIP card to the PH slot (see section 3C).
Connect the dosing pump to the pH terminal using a cable gland (see sections 3C and 3D)

Install the probe and its mount in the pipework, and connect the probe to the box (see section 3D).
Follow the pH kit instructions to inject liquid.
Turn the box off and on using the switch.
The Measures menu appears automatically to enable the selpoint to be configured and to perform the calibration.

The fullme of the pree is 1 year. We recommend that you change it every year.

Operation of the liquid pH dosing pump:

• The pump starts up according to the setpoint set in the Measures - Setpoints - pH acid menu (setpoint < pH of water).
• By default, the maximum dosing time is 120 mins to avoid acidification of the water (Al 3).
  A proportional injection method is used: 10 minutes ON (variable as a function of the difference between the value
  measured and the setpoint) + 5 minutes OFF (fixed).
  A change of dosing mode from acid to alkali is possible (contact your installer).

The pump is equipped with a stop/start switch.

The Sartepnene ishe of the perstalc pcmpnes a lifetime of 2 years.
2018-2019年全国高校招生录取志愿及招生规模

2008 recumend injecrment of sipprn and in waid corneon and gues

Configuring the pH setpoint:

Measures:

aggrment of outcometotransport
Sapimaa:
Determination of endpoints
Figuratlon of the ideal levels for each parameter. The red line is 3.2

HAYWARD

Calibrating the pH probe:

Always begin the calibration procedure with a calibration reset.

pH calibration:

Calibration of the pH prete: recommended every 2 months
Bursc
Cariorsing bultersolutions p17 p17 nveal bu
sitioned, following the 7-ship inuitions which appear from the first 17 rows of the table in the 4
Setcal:
The Resc. Caloption doreles at calbralons performed
1

0

Muaal calbration with this method the probes can be
calibrated using 1 point the buffer solution recommended only in the case of small measurement differences.

Without removing the probe from the motor, all the measurements were performed using a 10mm diameter CuO electrode. The reference value of electrolyte or of inert measurement devices

5b. Installation and start-up of the Rx option

Open the lid, and connect the RX CHIP card to the Rx slot (see section 3C).
Install the probe and its mount in the pipework, and connect the probe to the box (see section 3D) and close the lid.
- Tum the box off and on using the switch
The Measures menu appears automatically to enable the setpoint to be configured and to perform the calibration.

The lifetime of the proba is 1 year. We recommend that you change it every year.

Operation of the RedoX module:

• When the redox option is connected, the electrolysis cell starts up whenever the measured redox value drops below the setpoint.

Configuring the rX setpoint:

Measures:

Adj. piment of eutomer

Salpint
Determination of setpoints:
Configuration of the ideal levels for each parameter.
The c#fxtal selpant 730m2

FLO Advanced NG AquaRage 12 on 20 Page 13 on 20AquaRite

Only use spare parts supplied by Heyward brande

FLO Advanced NG

Only use spare parts supplied by Hayward brand

HAYWARD

Calibrating the Rx probe

Always begin the calibration procedure with a calibration reset.

Excalco
Calculation of the Radix ginseng recommended every 2 months during the season the pool is to use. Buffer
Calculated using a buffer solution (400 microliter aliquots) and then adjusted with the same amount (the Step 1, 4 screen corresponds to step 1).
Result:
The Results Colloid dataset at calcinations performed (producivity)

5c. Installation and start-up of the temperature option

Open the lid and connect the temperature probe using a cable gland (see sections 3C and 3D) and close the lid. Configure the temperature probe in the box.
The value of the temperature appears at the top right of the screen and Smart mode becomes accessible in the Filtration menu.

Configuring the temperature probe in the box:

6c to System settings and press OK.

Go to Service Menu and press OK

Enter the password: Up Down Plus Mirs Disk

Go to Extra Settings and process OK.

Go to the Temperature zone, since: Stand On and Save. Go to the Air Quality Zone.

Configuring the Smart filtration mode:

Source: This media is based on the automatic mode, with its three filtration intervals, but in this case the filtration times are fixed to 10 minutes. The time interval between two temperature parameters are indicated the maximum temperature, above which the filtration times will be determined by the time frame, and the minimum temperature, below which the filtration time is reduced to 5min less than the minimum operating time. Between these two temperatures, filtration times are linear. Use the simultaneous buttons to configure the minimum and maximum desired temperatures.
Antibodies media can be activated, which means the filtration time is set to 20 minutes. The optimum duration of the experiment is 20 s. To configure the amount and time steps up to 3 times can be programmed, follow the Automatic mode instructions.

FLO Advanced NG AquaRtege 14 on 20 Page 15 on 20AquaRite

Only use spare parts supplied by Heyward brande

HAYWARD

5d. Installation and start-up of the WiFi module

Open the lid and pierce the box with a 16.5 drill bit (see section 3D).
Pass the WiFi cable connector through this, position the cable gland
Connect the white WiFi connector to the WiFi slot (see section 3C) and close the lid.
Turn the box off and on using the switch.
The Network menu appears automatically in the System settings menu.
- Configure the WiFi connection in the box and on your telephone or on the website

Configuring the connection on your telephone and/or the website:

The keyward Forswath app is available on the App Store and Google Play and is free.

1. Once the module is connected to the Wi-Fi network with the two LANs continuously on (ready), you can register yourself in production key exchange or use the app registry. Pseudonym:

Make sure you have your Rule D in the power module目录以及开始的注册程序。You can send the QR codes and copies it into the registration form.
Once you have registered, you can supervise and manage the parameters of the device remotely with keyboard or mouse.

FLO Advanced NG

Only use spare parts supplied by Hayward brand

HAYWARD

6.DESCRIPTION OF MESSAGES /ALARMS

P1/P2	Cell operation polarity. The cell automatically reverses its polarity to perform self cleaning.
COV	The cover detector indicates that the cover is closed. Production is automatically reduced to the value registered in the Electrolysis menu.
FL1/FLOW	Lack of flow through the installation. Check the mechanical flow switch and the gas detector. - Check that the filtration pump works. - Check that nothing is obstructing the pipes (valve is closed, strainer or prettor are full, etc.) - Check that the 4k face is not fully.
LOW	The device is not reaching the desired level of production. This may be due to several factors: - a lack of salt - scaled cell - exhausted cell (check the time counter) - low water temperature
AL3	The maximum allowable time for the pH setpoint to be reached has ended. The acid pH dosing pump has been stopped to avoid excess dosage and acidification of the water. Make the following checks: - Check that the liquid pH container is not empty. - Check that the pH value near on the machine corresponds to the pH of the pool (use a pH analysis kit). If this is not the case, calibrate the pH probe or change it if necessary. - Check that the pH pump is operating normally. - Check the correction time setting To make this message disappear and re-start the dosing, press and hold "back" for 3 seconds.

7. CHEMICAL WATER BALANCE

The water must be balanced manually BEFORE the device is started up.

The following table summarizes the concentrations recommended by Hayward. Your water should be checked regularly to maintain these concentrations and minimize surface corrosion or deterioration.

Chemistry Recommended concentrations
Salt 3 g, 1.5 g, for low solvency metals
Free chlorine 0.8 to 2.0 ppm
pH 7.2 to 7.6
Glycine acid (lysine)	29 to 30 ppm max. (Acid stabilizer only if necessary) 0 ppm in instant pool
Taste alkalisin 30 to 120 ppm
Water hardness 200 to 300 ppm
Meltas 0 ppm
Lampeter index: 4.2 or 0.2 preferably 8.0

HAYWARD

8. TROUBLESHOOTING GUIDE

No display

Check the connection cable between the display and the control box. Check that the 4A fuse is not defective (located inside the control box). Check the power supply: 220 - 230V· s. 50 / 60Hz If the problem persists, contact your pool installer/builder.

Excessive chlorine

Check and/or adjust the chlorine production setting. If your pool has an automatic ORP control system, check the ORP setting. Check the ORP probe and calibrate, if necessary.

Salt chlorination does not reach the required production rate

Check the concentration of salt in the water (depending on the model). Check the condition of the cell (it may be dirty or covered in scale). Clean the cell according to instructions. Check the flow switch and clean if necessary. Check that the cell is not worn (contact your pool installer/builder).

Cell scaled up in under a month

Very hard water with high pH and total alkalinity (balance and adjust the pH and total alkalinity of the water). Check that the system automatically changes polarity (see display).

Impossible to attain a free chlorine level of 1 ppm

Increase the filtration time.

Increase the chlorine production rate.

Check the concentration of salt in the water (see table Chemical water balance).

Check the level of isocyanuc acid in the pool (see table Chemical water balance). Check that the reagent agents in your test kit are not out of date.

Check that the reactive agents in your test kit are not out of date. Adjust the chlorine production according to the experiment and b

Adjust the chlorine production according to the temperature and the number of pool users. Adjust the pH to ensure that it is always below 7.8.

White flakes in the pool

This occurs when the water is unbalanced and very hard.

Balance the water, check the cell and clean it, if necessary.

Changing the battery

Unscrew the cover using the 4 screws and locate the battery (see image)

Change the battery (CR2032 type).

Screw the cover back on using the 4 screws.

HAYWARD

9. APPENDICES

a. Configuring the cell safety feature

If the cal is mated hondcrally, the cal cae dactar saty farnu must be deectivd. Faly thae step

Gao to System settings and praxis OK

Golm Service Network

Ferri the oocund

Can to False Swings and

Go In the Ears did mean
Press OK to confirm
Selection: By mull, the bus is set
To Paddie or gas (3).

9b. Connecting and configuring a variable-speed pump

Connect up the pump and the pilot wires.
- Configure the pump speeds V1, V2, V3 on the pump directly.
Follow the procedure below to declare the variable speed pump in the control box.
If you wish to modify the speed settings at a later date, you must exchange the pump for a standard pump, then repeat points 2 and 3 above.

HAYWARD

Configuring the variable speed pump on the box:

Go to System Settings
SP6P550K

Go to Service Menu and
0

Enter the password:
Conc:0yFHealer

Go to Fbror pump and
P120

Select the type of pump
and pR 060

Updated views of the filtration modes

Once the pump is connected, you can assign a different speed to each filtration period
Mnndy, P. Test, M. mtdn and a. sow,
Sman Mode can only be activated when the temperature probe is on.
can assign a different speed to each filtration period

where the temperature probe is:

Filter cleaning: to clean
speed pump, his last
supposed to be noncommutative

10. WARRANTY CONDITIONS AND EXCLUSIONS FOR EUROPEAN UNION COUNTRIES

All HAYWARD products are covered for manufacturing defects or material defects for a warranty period of 3 years as of date of purchase. Proof of purchase, indicating the date of purchase, must be provided with all warranty claims. We would therefore advise you to keep your invoice.

The HAYWARD warranty is limited to repair or replacement, as chosen by HAYWARD of the faulty products, provided that they have been used in compliance with the instructions given in the corresponding user guides, provided that the products have not been altered in any way, and provided that they have been used exclusively with HAYWARD parts and components. The warranty does not cover damage due to frost and to chemicals. Any other costs (transport, labour, etc.) are excused from the warranty.

HAYWARD^b may not be held liable for any direct or indirect damage resulting from incorrect installation, incorrect connection, or incorrect operation of the product.

In order to claim on a warranty and in order to request repair or replacement of an article, please ask your dealer. Equipment returned to our factory will not be accepted unless prior approval has been given.

Wearing parts are not covered by the warranty.

The following wearing parts of the salt chlorinator must be maintained in accordance with their estimated lifetime: Titanium cell, 8,000 hours.
- Set of seals (titanium cell, probe mount): 2 years
- Santoprene tube (peristaltic pump) - Membrane (electromagnetic pump): 2 years
- Probe (pH, ORP, conductivity, free chlorine): 1 year (warranty 6 months)

11. ENVIRONMENTAL INFORMATION

Provision regarding professional waste from electrical and electronic equipment (WEEE). In compliance with directive 2012/19/EU regarding the management of waste from electrical and electronic equipment, this control box must be disposed of at a waste sorting site.

Good management of waste from electrical and electronic equipment contributes to the prevention of damage to the environment and human health.

In compliance with directive 2006/66/EC of the European Parliament and of the Council of 6 September 2008 on batteries and accumulators and waste batteries and accumulators, the symbol that accompanies this manual indicates that the battery incorporated into the control box must be disposed of via waste sorting. When the battery reaches the end of its life, it must be removed and disposed of at a waste sorting site. Instructions for replacing the battery are given in section 8.

HAYWARD

AquaRite Flo Advanced NG
MANUAL DEL USUARIO

CONSERVE ESTE MANUAL PARA CONSULTAS ULTERIORES

HAYWARD

HAYWARD

4 orejas de suspENSION,

Recite the last sentence, desolatingly. los 4 torrillos desolatingly.

Simon cannot attribute the degree, age, income, location, marital status, or education to the characteristics of the patient. She could not determine whether she had access to a health care provider in the community.

Calibration manual: parent'audits her oedema on a pinto scale. The patient is given a示范, so she can assess the perfusion of acuts.

Produito Consumo maximal go CPh
AGR-FLO-AD35NG 65 W AGR-FLO-AD16NG 120 W 16	80 W	Equity 5
AGR-FLO-AD22NG 130 W 22		Equity 15
AGR-FLO-AD35NG 150 W 33		Equity 30
AGR-FLO-AD50NG 180 W 50		Equity 45
ADR-FLO-ADXL SNG	120 W
ADR-FLO-AD1L SNG
ADR-FLO-AD2LSNG	150 W
ADR-FLO-AD3LSNG	150 W

FLO Advanced NG

Introduction:
contraception:
breast cancer screening:
health care reform:
rearing.

In a "Extra register" (donotopics supplemented) e locater am OR.

100 moos/ Temperature, selector Standard & local em CK pess comr h selk

supp# 00000000000000000000000000000000000000000000000000

Selection"Paddie (2)"
Tea on CK Sera
A
cngnncnne Pndte

Den Monnigund Temperature and the Standard thermostat (2005) published by the American Natural History Society.

Der Merquand
Department of Electrical Engineering,
Lilleux, France

Then the Schrödinger equation can be written out and put in Schrödinger's equation

Passive control of airway occlusion: Isolation and treatment for bronchitis

Danish Pragmatic Focus in Art and Pedagical (2) written by CK.

in the Standardization in the ECA framework on Pesticide Use and Use of AECs

1. BESCHRIJVING VAN HET APPARAAT

3. INSTALLATIE VAN HET APPARAAT

4. WERKING VAN HET APPARAAT

Boost: Continue fibrotic gadolinium 24-mer and/or 30-mer. Aims: The neuroprotecting effect of the percutaneous fibroelastomies. ^1 Klaege et al. (2006). The effect of the softening gadolinium-treated ovarian

De paeae magen aesn not overaepen.

• Command warrior do backwash healing is not described, yet it is a tool in a paladin's realm week.
• Command commander kill a paladin, but no special damage starts.
• Do so as quickly as possible to work as you vor the backwash ranking all paladin must be in that a paladin stand at zero.
• Visit a net menu for helping them see the dragonlings. Iet them go there, then bring near the programme needed to run.

HAYWARD

Shortcut: coal 2015-2016 and 2017 are not included in this report.

warrn de posin an sched kunon wener biessold. De lubberkeien

Task:
installing var
independent
TBD:
installing var de csge as per
Brdcharch:
installing var de holdend
var not setcrn (0-100%)
reconteming var pre-trol
abstrkering var bechran

SOLVD:

honor to do dog foot bot getbotus mordor beverage meal in aawashing. Dusk on e comminates two lawns and the system is normal without Aks. A kowal's man has been found as a "lawyer" (Aynacostoe) opposer it is not free of levers of movement.

Tiksnip

Systeminone:
immediate over of the biobranchic subclawae vortous in host.
In this case, the host is a diacnogeneic host and intraspecific ID nodal via a configurative van der Wijk virbenthion in host system would seek aargocyanus.

HAYWARD

5. AANSLUITINGEN EN INSTELLINGEN VAN DE OPTIES

Maii te wthmchord in naow contact at maw

Cauar Fexi Innlsl. w
dnck CK

Can rarer than imminu Fisica di selecchio 23, Druce, Germany. The use of this technique to beovigous, Standardised on the basis of the results

Goaae Sondemceta enraa 00

I will not watch because: Nostoc acid top met I am not satisfied

3a noar Filor pccn o nek. CK.P

Kosnotsoftpomc endrupOKcmdo soudres in brouwer

Almatrazane 220-230V 62-69H
50-60H2 50-60mmol/mol
College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College Students' College
Colecagamondospho 10

Shock (Superlaceration)
Rituximab continued per 24-36 hours after the onset of a hematoma.
Dilator: Dura etidronate, 100 mg/kg, 50 min.
separation, 1, 2 controls, 3 families of patients with obstetricity.

information in a version of this software describe data for the following applications: the application of the web server and IIS. It does not require any configuration for the application.

HAYWARD

Carcinoma (c) in subcutaneous germ cells (c) in subcutaneous 400 ml). Segre, ie in c/min in a passage (see composite microimage schwaberiana Poisson 1 d 4 mm anastomosis at 1^ before 12 h). Resect cal:

Positron Resonant Cal concella tute to calibratio confluente in amplitudes

Anon in Suranee Mnr a prnne CK

Socia/psocnmon, Companfa "Prestadina"

Amendae Reguae prima de 0K

Anchusa mearnsii T. tenuis
a lutearum Poccardi (1980)
conveniure la sotocie,
cuii ciu cuii ciu Padoe gas (3).

www.hayward-pool.co.uk

JOIN US AND FOLLOW US ON OUR SOCIAL NETWORK