AquaRite Flo NG - Water pump HAYWARD - Free user manual and instructions
Find the device manual for free AquaRite Flo NG HAYWARD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hayward |
| Model | AquaRite Flo NG |
| Product type | Swimming pool water pump |
| Height | 60 cm |
| Width | 30 cm |
| Depth | 40 cm |
| Weight | 15 kg |
| Power supply | 230 V, 50 Hz, single-phase |
| Power | 1.5 HP |
| Maximum flow rate | 12 m³/h |
| Connection | Inlet/outlet 50 mm |
| Main functions | Circulation, filtration, compatibility with salt chlorination system |
| Maintenance and cleaning | Clean the pre-filter basket regularly; check seals and impeller |
| Safety | Integrated thermal protection; automatic shutdown in case of overheating |
| Spare parts and repairability | Cover seal, basket, impeller, capacitor available |
| Protection rating | IPX5 |
| Max water temperature | 40 °C |
| Warranty | 2 years |
| Standards | CE, NF |
Frequently Asked Questions - AquaRite Flo NG HAYWARD
How to install the AquaRite Flo NG pump?
Place the pump on a flat and stable surface, near the filtration system. Connect the inlet and outlet pipes (50 mm) respecting the flow direction. Make sure the power supply matches the specifications (230 V, 50 Hz). Bleed the air before starting up.
What is the power of the pump?
The AquaRite Flo NG pump develops a power of 1.5 HP (approximately 1.1 kW), suitable for medium-sized pools.
How to clean the pre-filter basket?
Turn off the power supply. Unscrew the basket cover, remove the basket and empty it. Rinse it with clean water. Replace it and screw the cover back on. Check the seal to avoid leaks.
What to do if the pump does not start?
First check the power supply and circuit breaker. Make sure the basket is not clogged. If the pump is in thermal protection, wait for it to cool down. If the problem persists, contact a professional.
The pump leaks, what should I check?
Check the condition of the basket cover seal. Tighten the connections. Inspect the pipes. If the leak comes from the pump body, there may be a crack; replace the part.
What is the lifespan of the pump?
With regular maintenance (cleaning, checking seals), the pump can operate for 5 to 8 years in seasonal use.
Can I use the pump with a salt chlorination system?
Yes, the AquaRite Flo NG is compatible with Hayward salt chlorination systems. Make sure the flow rate is sufficient for the cell operation.
How to bleed air from the pump?
Before first startup or after a prolonged stop, open the air bleed valve located on top of the pump. Let water flow until there is no more air, then close.
What are the signs of impeller wear?
A decrease in flow, abnormal noise (grinding) or excessive vibration may indicate a worn impeller. Replace it with an original part.
Where to find spare parts?
Spare parts (seals, basket, impeller, capacitor) are available from Hayward authorized dealers or on their official website. Always use original parts.
User questions about AquaRite Flo NG HAYWARD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual AquaRite Flo NG - HAYWARD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AquaRite Flo NG by HAYWARD.
USER MANUAL AquaRite Flo NG HAYWARD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAYWARD
Model : AquaRite Flo NG
Category : Water pump