OSB 1021 - Hand blender OK - Free user manual and instructions

Product type	Hand blender
Brand	OK
Model	OSB 1021
Rated power	400 W
Supply voltage	220-240 V ~ 50/60 Hz
Protection class	Class II
Included accessories	Motor unit, hand blender attachment with blade and shield, suspension loop
Main functions	Mixing, blending, pureeing, Turbo function
Safety	Safety lock (torque release button), automatic shut-off in case of overheating
Cleaning of motor unit	Soft damp cloth – do not immerse
Cleaning of the blending shaft	Wash under running water – do not immerse the hollow shaft
Intended use	Household use only, for food products
Maximum continuous operation time	60 seconds (normal speed) / 30 seconds (Turbo)
Cooling time after overheating	Approximately 20 minutes
Food processing guide (examples)	Almonds 100 g, hard-boiled eggs 200 g, onions 200 g, parsley 30 g, spices 30 g, steak 150-200 g
Blade material	Stainless steel (estimated)
Approximate weight	1.2 kg (estimated)
Dimensions (total height)	Approximately 40 cm (estimated)

Frequently Asked Questions - OSB 1021 OK

How to clean the OSB 1021 hand blender?

Clean the motor unit with a soft damp cloth – never immerse it. Wash the blending shaft under running water, ensuring no liquid enters the hollow shaft. Dry completely before storing.

Can I blend hot liquids with this appliance?

No, never blend boiling liquids or hot fats. Risk of burns and splashes.

How to avoid splashes while blending?

Hold the blender vertically and immerse the shaft deeply into the food. Tilting the appliance may cause splashes.

What to do if the appliance does not start?

First check the power source (socket, fuse). If the appliance has overheated, unplug it and let it cool for approximately 20 minutes before using again.

What is the maximum continuous operation time?

Do not exceed 60 seconds at low speed and 30 seconds in Turbo mode. Let the appliance cool down between uses.

Can I blend ice cubes with the OSB 1021?

No, this appliance is not designed for ice cubes or hard foods like bones. Use it only for soft or cooked foods.

How to disassemble the blending attachment?

To disassemble, align the icons on the accessory and the motor, then turn until you hear a click. Use the torque release button (D) if necessary.

Does the appliance heat up normally during use?

Slight heating is normal, but if it becomes too hot, unplug it and let it cool for 20 minutes. This may be due to continuous use or a blockage.

Where to find spare parts for the OK OSB 1021 hand blender?

Use only original spare parts and accessories recommended by the manufacturer. Contact your dealer or Imtron GmbH customer service.

How to store the hand blender?

Store it in a dry and cool place, out of reach of children and pets. Use the suspension loop (I) to hang it if desired.

USER MANUAL OSB 1021 OK

102000000000000000000000000000000000000000000000

HERZLICHEN GLUCKWUNSCH

Thank you for your purchase of this ok. product.

IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

1. This product is only suitable for private household use and it is not designed for commercial purpose.
2. Danger of electric shock! Do not attempt to repair the product yourself. In case of malfunction, repairs are to be conducted by qualified personnel only.
3. Warning! During cleaning or operation do not immerse the electrical parts of the product in water or other liquids. Never hold the product under running water.
4. This product shall not be used by children. Keep the product and its cord out of reach of children.
5. This product can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are under supervision or have been given instruction concerning use of the product in a safe way and if they understand the hazards involved.
6. Children shall not play with the product.
7. Danger of burns! Do not use the product during the cooking process, with boiling liquids or hot fat.
8. Regularly check the power plug and power cord for damage. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a danger or injury.
9. Danger of injury! Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
10. Always disconnect the product from the supply if it is left unattended and before assembling, disassembling or cleaning.
11. Switch off the product and disconnect from supply before changing accessories or approaching parts that move in use.
12. Never use accessories which are not recommended by the manufacturer. They could pose a safety risk to the user and might damage the product. Only use original parts and accessories.

13. Use the product only for its intended purpose and with recommended accessories and components. Improper use or wrong operation may lead to hazards.

14. Do not continuously operate the product for too long to avoid overheating the motor. The product is not suitable for continuous operation. Please refer to Processing guide for operation and rest time. Let the product cool down if the product housing becomes too hot. Only operate the product again, after it has cooled.

15. Never add ingredients to the container while the product is operating.
16. Never let the blade face towards anybody while operating the product.
17. Do not touch the blade, blade guard and moving parts. Keep fingers, hair, clothing and utensils (e.g. knives, forks etc.) away from all moving parts.
18. During operation, keep hands and utensils out of the container to reduce the risk of severe personal injury and/ or damage to the blender. Only use a scraper when the product is not running.
19. Clean the product and all other accessories after each use.

20. Follow the instructions in the chapter Cleaning and care.

21. Observe all safety instructions to avoid damage through improper use!

22. Keep this instruction manual for future use. Should this product be passed on to a third party, then this instruction manual must be included.
23. Before connecting the product to the power supply, make sure that the power supply voltage and current rating corresponds with the power supply details shown on the product rating label.
24. Never use a damaged product! Disconnect the product from the electrical outlet and contact your retailer if it is damaged.
25. To avoid damaging the cord, do not squeeze, bend or chafe it on sharp edges. Keep it away from hot surfaces and open flames as well. Do not let rotating blades touch the power cord.
26. Lay out the cord in such a way that no unintentional pulling or tripping over it is possible.
27. If an extension cord is used, its capacity needs to be suitable for the power consumed by the product.
28. Do not operate the product with wet hands or while standing on a wet floor. Do not touch the power plug with wet hands.
29. Do not open the product casing under any circumstances. Do not insert any foreign objects into the inside of the casing.
30. Do not pull the power plug out of the electrical outlet by the power cord and do not wrap the power cord around the product.
31. Connect the power plug to an easily reachable electrical outlet so that in case of an emergency the product can be unplugged immediately. Pull the power plug out of the electrical outlet to completely switch off the product. Use the power plug as the disconnection device.
32. Disconnect the power plug from the electrical outlet when not in use and before cleaning.
33. If the power cord should overheat, stop using the product and disconnect the product from the electrical outlet.
34. Do not place the product on hot plates (gas, electric, coal cooking range, etc.). Keep the product away from hot surfaces and open flames. Always operate the product on a level, stable, clean, heat-resistant and dry surface.
35. Never leave the product unattended during use.
36. Dry the product and all accessories before connecting it to the power supply and prior to attaching the accessories.

EN

10

INTENDED USE

The product is exclusively intended to mix and blend foodstuff. This product is only suitable for private household use and it is not designed for commercial purpose. Every other type of use can lead to damage to the product or injury.

The Imtron GmbH assumes no liability for damage to the product, for property damage or for personal injury due to careless or improper usage of the product, or usage of product which does not meet the manufacturer's specified purpose.

COMPONENTS

Fold out front and rear page for product illustrations.

A. ● button

F. Blade

B. button (Turbo)

G. Blade guard

C. Motor unit

H. Power cord with plug

D. Lock/Unlock coupling

1. Hanging loop

E. Hand blender attachment

BEFORE FIRST TIME USE

• Remove the product and accessories carefully from the original packaging. It is recommended to keep the original packaging for storage. If you wish to dispose of the original packaging, please observe applicable legal provisions. Should you have any questions regarding proper disposal, contact your local waste management center.
• Check for completeness and transport damage. In case of damages or incompleteness please contact your dealer.
  After unpacking, please refer to chapter Cleaning and care.

OPERATION

Suitable for: Blending juices and shakes, mixing soft ingredients, pureeing cooked ingredients.

1

Mount the hand blender on the motor unit.

To do so, align the blender's icon with the motor unit's icon. Rotate the blender until it clicks in place. And icons must be aligned.

2

Connect the plug to a suitable outlet.

3

Dip the blender bar as deeply as possible into the ingredients. Work through the ingredients by moving the product gently up and down.

Hold the blender vertically. Tilting it might lead to splashing foodstuff.

4

Set the desired speed selection. Press and hold button. For using the extra fast turbo mode press and hold the button.

ATTENTION!

• Always ensure the product is disconnected from the power supply before it is fully and correctly assembled!
• Danger of hand injury! Handle the blade with care as it is very sharp!
• Never use your hands to reach into the food container. Always use wooden or plastic spatulas, and only when the hand blender is not running. Never insert e.g. knives, forks etc. into the container while using the product.
• Do not use this product for processing ice, hot liquids, heavy batter/dough, or hard foods.
• Never touch the blade of the blender. Touch it only a its shaft.
  Pre-cut the food into small and even pieces.
  NOTE: When pureeing food, make sure to use enough liquid (juice, milk, etc.) to obtain a smooth mixture. Adjust the consistency of the mixture by adding more liquid or soft solids. The clication necessary can only be attained, if enough fluid is added to the foodstuff.

CLEANING AND CARE

WARNING!

Before cleaning, always switch off the product and disconnect the plug from power.

Cleaning the motor unit: Use a soft, slightly damp cloth.
Make sure that no moisture is entering the product during cleaning.
Never immerse the motor unit in water or other liquids.

Cleaning the hand blender attachment: Wash the blending bar under running water. Then dry thoroughly.

Make sure that no liquid enters the shaft.

• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp implements to clean your product.
  Dry the product thoroughly after cleaning.
• Store the product in a cool, dry location, away from children and pets.

PROCESSING GUIDE

Food Maximum quantity	Maximum time (sec)	Setting
Almonds 100 g 15			●
Boiled eggs 200 g 4			●
Hazelnuts 100 g 15			●
Onions 200 g 5			●●
Parsley 30 g 10			●
Shallots 200 g 5			●●
Spices 30 g 10			●
Steak 150 - 200 g 15			●
Walnuts	100 g 15		●

Warning: The max. continuous operation time must not exceed 60 seconds low speed and 30 seconds using the turbo function.

WARNING!

If food gets stuck under the blade guard, always unplug the product before clearing the blockage.

EN

12

TROUBLESHOOTING

If there are any problems during operation, please refer to the following table. If problems cannot be solved as indicated under Solution, please contact your manufacturer.

Problem Possible causes Solution
Product does not work · Interrupted power supply. · Product is overheated.	· Check the power supply. · The product is not suitable for continuously operation. Unplug and let the product cool down for approx. 20 minutes.
Blade does not turn or turns with difficulty	· Blockage due to food that is too large or too hard.	· Unplug the product and remove the blockage or cut the food into smaller parts.
Product feels warm/hot during operation	· Blockage due to food that is too large or too hard. · Continuous operation.	· Unplug the product and remove the blockage or cut the food into smaller parts. · The product is not suitable for continuously operation. Unplug and let the product cool down in order to avoid overheating.

SPECIFICATIONS

Rated voltage : 220 - 240 V~, 50/60 Hz

Rated power : 400 W

Protection class : Class II

DISPOSAL

The crossed-out wheeled bin logo requires the separate collection of waste electric and electronic equipment (WEEE). Electric and electronic equipment may contain dangerous and hazardous substances. Do not dispose of this product as unsorted municipal waste. Return it to a designated collection point for the recycling of WEEE. By doing so, you will help to conserve resources and protect the environment. Contact your retailer or local authorities for more information.

FELICIDADES

B. Botao (Turbo) ● ●