OSB 103 W - Hand blender OK - Free user manual and instructions

USER MANUAL OSB 103 W OK

Thanks for your purchase of an ok. product. Please read this manual carefully and keep it for future reference.

IMPORTANT SAFETY INSTRUCTIONS . READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

1. This product shall not be used by children. Keep the product and its cord out of reach of children.
2. This product can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved.
3. Children shall not play with the product.
4. A damaged power cord may only be replaced by the authorised service agent in order to avoid hazards.
5. The product is not suitable for continuous operation. Do not operate the product longer than 1 minute. Let the product cool down before next use.
6. Always disconnect the product from the supply if it is left unattended and before assembling, disassembling or cleaning.
7. Switch off the product and disconnect from supply before changing accessories or approaching parts that move in use.
8. Use the product only for its intended purpose and with recommended accessories and components. Improper use or wrong operation may lead to hazards.
9. Care shall be taken when handling the sharp cutting blades during cleaning.
10. This product is not intended for commercial use. It is designed for household use and similar applications only, such as for example:

-in employee cafeterias, in stores, offices and other working environments;
-by customers in hotels, motels and other residential facilities;
-in Bed and Breakfast establishments;
-in farm houses.

EN

12

Clean the product and all other accessories after each use.
12. Follow the instructions in the chapter Cleaning and care.

1. Read this user manual thoroughly before first use and pass it on with the product. Pay attention to the warnings on the product and in this user manual. It contains important information for your safety as well as for the use and maintenance of the equipment.
2. Never leave the product unsupervised while it is switched on.
3. Do not place heavy objects on top of the product.
4. Never immerse electrical parts of the product in water during cleaning or operation. Never hold the product under running water.
5. Do not under any circumstances attempt (e.g. damage in power cord, product is dropped, etc.) to repair the product yourself. For servicing and repairs, please consult an authorised service agent.
6. The mains voltage must match the information on the rating label of the product.
7. Only unplug from the power socket can separate the product completely from the mains. Please be sure that the power plug is in operable condition.
8. Avoid damages to the power cord that may be caused by kinks or contact with sharp corners.
9. Keep this product including power cord and power plug away from all heat sources like for example, ovens, hot plates and other heat-producing products/objects.
10. Only unplug from the power socket by the plug itself. Do not pull on the cord.

11. Unplug the product ...

12. when the product is not being used,
    -in case of malfunctions,

13. before attaching / detaching accessories and

14. before cleaning the product.

15. Use this product in dry indoor areas only and never outdoors.

16. Place the product on a flat, sturdy and slip-resistant surface.
17. Never use, expose or put the product near to:

direct sunlight and dust;
- fire (fireplace, grill, candles), water (water splashes, vases, ponds, bath tube) or heavy moisture.

1. This product is not intended for commercial use. It is designed for household use only.
2. Never pour boiling liquids or very hot food products into the blender! Allow them to cool down to a lukewarm temperature.
3. Do not use this product with boiling liquids or very hot food products! Allow them to cool down to a lukewarm temperature.
4. Never operate the product when it is empty.
5. Do not hold on to the inside of the blender during operation. The blades are extremely sharp!
6. Never insert any cutlery or stirring objects into the blender while the product is in operation. There will be a considerable risk of injury if you touch any very fast rotating blades!
7. Do not allow the product to operate unsupervised.
8. Make sure that the motor unit and supply cord do not become wet.

INTENDED USE

This product is suitable for preparing foods only. Any other use may result in damage to product or injuries. To avoid dangerous situations, do not use device for any purpose other than those described in the instructions. Improper use is dangerous and voids the warranty.

COMPONENTS

The product may be available in different colors.

A. Hanging loop

B. Power switch

C. Motor unit

D.Blender bar

E. Blade

F. Power cord with plug

BEFORE FIRST TIME USE

Remove the product and accessories carefully from the original packaging. Inspect the delivery contents for completeness and damages. Should the delivery contents be incomplete or damaged, contact your sales outlet immediately. After unpacking, please refer to chapter Cleaning and care.

USING THE STICKBLENDER

1 Connect the power plug to a suitable power outlet.
Place ingredients into a bowl tall enough to avoid splashing.

Note: Precut solid/large ingredients into small pieces before you process them.

3 Dip the stickblender as deeply as possible into the ingredients.
Switch on the product by holding down the power switch.
5 Work through the ingredients by moving the product gently up and down.
Unplug the power plug from the power outlet.

Caution: Never touch the blade, risk of injury. Always unplug the product before cleaning.

CLEANING AND CARE

• Warning! Unplug the product and let it cool down completely before cleaning. Never immerse electrical parts of the product in water during cleaning or operation. Never hold the product under running water.
• Warning! When cleaning, never use solvents or abrasive materials, hard brushes, metallic or sharp objects. Solvents are harmful to human health and can attack plastic parts, while abrasive cleaning mechanisms and tools may scratch the surface(s).
• Keep the product in a dry, cool location which is protected against moisture and direct sunlight. Keep this product out of the reach of children.

7 Fill some warm water into a bowl and put the blender bar into the water. Plug in the product and switch it on. Let the Blender bar operate for some seconds. Unplug the product.
8 Clean the product's exterior surfaces with a slightly damp cloth and then dry them thoroughly. Make sure that no water enters the product interior (for example, through the switch).

EN

14

TROUBLESHOOTING

If there are any problems during operation, please refer to the following table. If problems cannot be solved as indicated under Solution, please contact your manufacturer.

Problem Possible causes Solution
Product does not work	• Interrupted power supply	• Check the power supply
Blade does not turn or turn with difficulty	• Blockage due to food is too large or too hard	• Unplug the product and remove the blockage or cut the food into smaller parts
Product feels warm/hot during operation	• Blockage due to food is too large or too hard • Continuously operation time of 1 minute has been exceeded	• Unplug and let the product cool down in order to avoid overheating

TECHNICAL DATA

Rated voltage: 220 - 240V 50 / 60Hz

Rated power input : 175 W

Continuous operation time : 1 Minute

Protection class : II

DISPOSAL

Do not dispose of this product as unsorted municipal waste. Return it to a designated collection point for the recycling of WEEE. By doing so, you will help to conserve resources and protect the environment. Contact your retailer or local authorities for more information.

ENHORABUENA