Q: How to change the startup station on the OCR 510 DAB+?

On the OCR 510 DAB+, the default startup station is the first available station in the alphabetically sorted station list. This list is created during the first startup when the radio performs a full scan of all available DAB/DAB+ stations. If you want to change this station, you have two options: Perform a new full scan : Press and hold the MENU/INFO button in DAB mode until <Full scan> appears on the screen. Press SELECT to confirm. The radio will search for all available stations again, and the first station found will be played at the next startup. Save your preferred station as a preset : Select the desired DAB+ station, then press and hold the PRESET button until <# : (Empty)> appears. Use the TUN/CH buttons to choose a location from 1 to 10 and press SELECT to confirm. You can then quickly recall this station by pressing PRESET . For alarms , you can also set a specific DAB+ station as the ringtone: when setting an alarm, select [DAB] as the sound source, and the last DAB+ station listened to will serve as the alarm ringtone.

Q: Where is the power button on the OK OAC 2223 CH air conditioner?

The power button is located on the front control panel of your OK OAC 2223 CH air conditioner. This button is referred to as the "On/Standby Button" (technical reference: A5). It allows you to turn the unit on or put it in standby mode simply by pressing it, without needing the remote control . Note: By pressing this button, you only put the unit in standby mode. To completely turn off the power, you must unplug the power cord.

Q: How to use the OK ORI 1140 rice cooker: proportions and cooking steps

The OK ORI 1140 rice cooker works on a 1:1 ratio of rice to water . Use the included measuring cup: 2 cups of rice = water up to mark 2 3 cups of rice = water up to mark 3 4 cups of rice = water up to mark 4 5 cups of rice = water up to mark 5 Steps: Wash the rice and pour it into the container with the measuring cup Spread the rice evenly at the bottom Add water up to the corresponding mark (do not exceed mark 5) Place the container in the pot and close the glass lid Plug in the power cord Press the Power/Function button to start cooking The COOK indicator lights up during cooking. The WARM indicator lights up automatically at the end - the rice is ready and stays warm Important: Use at least 2 cups of rice. A smaller amount may not cook properly.

Q: Is the OK OTV 40GF-5023C television compatible with a universal remote control?

The OK OTV 40GF-5023C television is not compatible with universal remote controls from other brands. This Google TV model comes with a proprietary Bluetooth remote that can only be paired with this specific TV. According to the technical manual, the Bluetooth pairing method only supports the original remote provided with the television . Even though some universal remotes offer a programmable mode, they are not recognized by the Bluetooth pairing system of the OTV 40GF-5023C. Here’s what you need to know about the remote control: The remote uses both infrared (IR) and Bluetooth technology to operate. Bluetooth pairing is done by simultaneously pressing the Volume and Back buttons, and only the original remote can be paired with your TV. Universal remotes, even if they have Bluetooth functions, are not compatible with this model. If the remote fails, you need to order a compatible OK remote for the OTV 40GF-5023C from the retailer or manufacturer. If your remote is malfunctioning or unresponsive, first check that the batteries (AAA size) are not depleted, as this significantly reduces the operating range, estimated at about 7 meters. Also, ensure there are no obstacles between the remote and the IR sensor located at the front of the television.

Question 1

The dishwasher beeps but does not start the program - what to do?

Accepted Answer

If your ODW 6031 BI dishwasher beeps without starting the program, check these points in order:

1. The door

This is the most common cause. Make sure the door is completely closed with a clear click. A utensil or dish may be blocking the closure - check the inside.

2. Water supply

Check that the water inlet tap is fully open and that the water pressure is between 0.4 and 10 bar (as indicated in the technical manual). Ensure that the inlet hose is not kinked or crushed.

3. Power on

Press the Power (on/off) button to turn on the device, then select a program with the P (Program) button. The beeping may indicate that the device did not recognize the selection.

4. Error codes

According to the manual, the beeps may correspond to:

E1 - Water supply problem: check the tap and the hose connection
E2 - Overflow detected: the main filter may be clogged

If the problem persists after these checks, it is likely that an electronic component is faulty. Consult customer service with your warranty number (visible in the manual).

Question 2

How to change the startup station on the OCR 510 DAB+?

Accepted Answer

On the OCR 510 DAB+, the default startup station is the first available station in the alphabetically sorted station list. This list is created during the first startup when the radio performs a full scan of all available DAB/DAB+ stations.

If you want to change this station, you have two options:

Perform a new full scan: Press and hold the MENU/INFO button in DAB mode until appears on the screen. Press SELECT to confirm. The radio will search for all available stations again, and the first station found will be played at the next startup.
Save your preferred station as a preset: Select the desired DAB+ station, then press and hold the PRESET button until <# : (Empty)> appears. Use the TUN/CH buttons to choose a location from 1 to 10 and press SELECT to confirm. You can then quickly recall this station by pressing PRESET.

For alarms, you can also set a specific DAB+ station as the ringtone: when setting an alarm, select [DAB] as the sound source, and the last DAB+ station listened to will serve as the alarm ringtone.

Question 3

Where is the power button on the OK OAC 2223 CH air conditioner?

Accepted Answer

The power button is located on the front control panel of your OK OAC 2223 CH air conditioner.

This button is referred to as the "On/Standby Button" (technical reference: A5). It allows you to turn the unit on or put it in standby mode simply by pressing it, without needing the remote control.

Note: By pressing this button, you only put the unit in standby mode. To completely turn off the power, you must unplug the power cord.

Question 4

How to sort television channels?

Accepted Answer

The OK ODL 40750FSTIB television allows you to manage and organize your television channels via the main menu. Here’s how to access your channel list and organize them:

Display the channel list

Press the LIST button on your remote control to instantly display the complete list of available channels
Use the Up/Down buttons to navigate through the list
Press OK to select and watch a channel

Access the channel menu

Press the MENU button to open the main menu
Navigate to Settings or Setup (depending on your version)
Select the Channels or Tuner section
Press OK to enter this menu

Search and add channels

In the Channels menu, select Channel Search or Auto Scan
Ensure your antenna is properly connected and oriented
Start the search and wait for the scan of all available frequencies to finish (this may take a few minutes)
The found channels will be added to your list

Delete or hide channels

Access the Channels menu via MENU > Settings > Channels
Select the channel you wish to modify
Look for the Delete, Ignore, or Hide options (depending on the available menus)
Confirm with OK

Quick navigation between channels

Use the PR+/PR- buttons (Next/Previous Channel) to quickly switch between channels
Type a channel number directly using the numeric buttons (0-9) to instantly access a specific channel
Press BACK to return to the previously watched channel

For more advanced operations like creating favorite lists or in-depth modification of the channel order, refer to the integrated E-Manual on your television (access it via MENU > Settings > E-Manual) or visit www.ok-online.com to download the complete manual in French.

Question 5

How to use the OK ORI 1140 rice cooker: proportions and cooking steps

Accepted Answer

The OK ORI 1140 rice cooker works on a 1:1 ratio of rice to water. Use the included measuring cup:

2 cups of rice = water up to mark 2
3 cups of rice = water up to mark 3
4 cups of rice = water up to mark 4
5 cups of rice = water up to mark 5

Steps:

Wash the rice and pour it into the container with the measuring cup
Spread the rice evenly at the bottom
Add water up to the corresponding mark (do not exceed mark 5)
Place the container in the pot and close the glass lid
Plug in the power cord
Press the Power/Function button to start cooking
The COOK indicator lights up during cooking. The WARM indicator lights up automatically at the end - the rice is ready and stays warm

Important: Use at least 2 cups of rice. A smaller amount may not cook properly.

Question 6

What do the markings on the included measuring cup correspond to?

Accepted Answer

The markings 1, 3, 5 on the measuring cup correspond directly to the water levels in the pot.

How it works:

Fill the included measuring cup with washed rice up to the desired marking (for example, up to the line "3")
Pour this rice into the pot
Pour water into the pot up to the same number as the rice (1:1 ratio)

Example:
- 3 cups of rice (up to the marking "3" on the cup) = water up to the marking "3" in the pot

Important: Pour at least 2 measuring cups of rice. With a smaller amount, the rice will not cook properly.

The water can be adjusted slightly depending on the type of rice and your personal preferences.

Question 7

Does the OK ODL 40750FSTIB television have Internet browsing?

Accepted Answer

Yes, the OK ODL 40750FSTIB television has built-in Internet browsing. You can access the web browser directly from the remote control to surf the Internet and check your favorite sites.

Accessing the browser: Press the Browser button on the remote control to open the television's web browser.

Internet connection: To use the browser, your OK ODL 40750FSTIB television must be connected to the Internet. You have two options:

Wi-Fi: Connect via the wireless network available in your home.
Ethernet cable: Use the network port (LAN) located at the back of the television for a stable wired connection.

Additional applications and services: Beyond web browsing, this television includes popular streaming applications accessible directly from the home screen:

Netflix
Prime Video
YouTube
Application Center (Apps) to download and install other services

You can switch between the web browser and applications by pressing the EXIT button to return to the main menu, then accessing the desired application or browser.

Question 8

Is the OK OTV 40GF-5023C television compatible with a universal remote control?

Accepted Answer

The OK OTV 40GF-5023C television is not compatible with universal remote controls from other brands. This Google TV model comes with a proprietary Bluetooth remote that can only be paired with this specific TV.

According to the technical manual, the Bluetooth pairing method only supports the original remote provided with the television. Even though some universal remotes offer a programmable mode, they are not recognized by the Bluetooth pairing system of the OTV 40GF-5023C.

Here’s what you need to know about the remote control:

The remote uses both infrared (IR) and Bluetooth technology to operate.
Bluetooth pairing is done by simultaneously pressing the Volume and Back buttons, and only the original remote can be paired with your TV.
Universal remotes, even if they have Bluetooth functions, are not compatible with this model.
If the remote fails, you need to order a compatible OK remote for the OTV 40GF-5023C from the retailer or manufacturer.

If your remote is malfunctioning or unresponsive, first check that the batteries (AAA size) are not depleted, as this significantly reduces the operating range, estimated at about 7 meters. Also, ensure there are no obstacles between the remote and the IR sensor located at the front of the television.

Question 9

How to set the time on the OK OCR 310 clock radio when the setting function is not working?

Accepted Answer

If you are having trouble setting the time on your OK OCR 310 clock radio, here is a detailed method to correctly set the time:

Steps to set the time on the OK OCR 310:

Plug the device into a working electrical outlet.
Identify the setting buttons: usually, there is a Set or Time button to enter setting mode, as well as + and - buttons or Hour and Minute.
Press and hold the Set button until the time display starts blinking.
Use the + and - buttons to adjust the hours, then press Set or wait for the minutes to blink.
Set the minutes in the same way using the + and - buttons.
Confirm the setting by pressing Set again or letting the display return to normal.

Additional tips if the setting does not work:

Check the power supply: make sure the clock radio is powered and, if applicable, that the backup batteries are in good condition.
Perform a reset: unplug the device for a few minutes and then plug it back in to reset the system.
Avoid pressing multiple buttons simultaneously that could block the setting mode.

By following these steps, you should be able to set the time on your OK OCR 310 clock radio correctly.

Question 10

How to heat a cup of milk with the OK OMW 320W microwave?

Accepted Answer

To heat a cup of milk with the OK OMW 320W microwave, pour the milk into a microwave-safe cup (marked "Microwave Safe"), without any metal parts or lid. Place the cup in the center of the turntable of the appliance.

Set the power level to Medium (55%) for a gradual and safe heating. This power, equivalent to about 176 watts, prevents the milk from heating too quickly and overflowing. Start heating for 30 to 45 seconds depending on the amount and initial temperature of the milk.

Check the temperature after this first cycle. If the milk is not hot enough, continue heating in 15 to 20 second intervals, stirring the milk between each interval to ensure even heat distribution and prevent hot spots.

Wait a few seconds after the microwave stops before removing the cup, as it may be very hot. If you prefer faster heating, you can use the Medium-High (77%) level, but then reduce the initial time to 20-30 seconds and monitor more closely to avoid overheating.

Avoid overheating the milk, as it may overflow or develop an unpleasant skin. Never use a closed or sealed container, as the accumulated pressure could be dangerous.

User manual OK : user manuals and guides in PDF

Models OK most viewed

Browse manuals OK by appliance type

Recent questions about devices OK