User manual OK Alarm clock radio : 9 free PDF user manuals

Q: How to change the startup station on the OCR 510 DAB+?

On the OCR 510 DAB+, the default startup station is the first available station in the alphabetically sorted station list. This list is created during the first startup when the radio performs a full scan of all available DAB/DAB+ stations. If you want to change this station, you have two options: Perform a new full scan : Press and hold the MENU/INFO button in DAB mode until <Full scan> appears on the screen. Press SELECT to confirm. The radio will search for all available stations again, and the first station found will be played at the next startup. Save your preferred station as a preset : Select the desired DAB+ station, then press and hold the PRESET button until <# : (Empty)> appears. Use the TUN/CH buttons to choose a location from 1 to 10 and press SELECT to confirm. You can then quickly recall this station by pressing PRESET . For alarms , you can also set a specific DAB+ station as the ringtone: when setting an alarm, select [DAB] as the sound source, and the last DAB+ station listened to will serve as the alarm ringtone.

Q: How to set the time on the OK OCR 310 clock radio when the setting function is not working?

If you are having trouble setting the time on your OK OCR 310 clock radio, here is a detailed method to correctly set the time: Steps to set the time on the OK OCR 310: Plug the device into a working electrical outlet. Identify the setting buttons : usually, there is a Set or Time button to enter setting mode, as well as + and - buttons or Hour and Minute . Press and hold the Set button until the time display starts blinking. Use the + and - buttons to adjust the hours, then press Set or wait for the minutes to blink. Set the minutes in the same way using the + and - buttons. Confirm the setting by pressing Set again or letting the display return to normal. Additional tips if the setting does not work: Check the power supply : make sure the clock radio is powered and, if applicable, that the backup batteries are in good condition. Perform a reset : unplug the device for a few minutes and then plug it back in to reset the system. Avoid pressing multiple buttons simultaneously that could block the setting mode. By following these steps, you should be able to set the time on your OK OCR 310 clock radio correctly.

Q: How to disable the alarm on the OK OCR 210 clock radio?

To disable the alarm on your OK OCR 210 clock radio, follow these simple steps: Locate the button marked "Alarm" or "Wekker" on your device. Press this button once to activate or deactivate the alarm function. When the alarm is activated, a light indicator will turn on the device. Press the "Alarm" button again to turn off the alarm if it is ringing. This procedure stops the alarm and prevents it from ringing again until the next programming.

Models OK Alarm clock radio most viewed

★★★★★

★★★★★

★★★★★

★★★★★

★★★★★

★★★★★

★★★★★

★★★★★

★★★★★

Other categories OK

TV 92 Radio 32 Microwave Oven 24 Dishwasher 19 Cooker 16 Fridge 10 DVD player 8 Fan 8 Air Conditioning 7 Smartphone 6 Vacuum Cleaner 5 Basket 5 Cd player/recorder 5 Tumble drier 5 Oven 4 Speaker 4 Hand blender 4 Kettle 3

See all categories OK (58) → ← All manuals OK

Recent questions about Alarm clock radio OK

🕐 12/06/2026

How to change the startup station on the OCR 510 DAB+? OK OCR 510 DAB+

🕐 25/04/2026

How to set the time on the OK OCR 310 clock radio when the setting function is not working? OK OCR 310

🕐 28/03/2026

How to disable the alarm on the OK OCR 210 clock radio? OK OCR 210

User manual OK Alarm clock radio : user manuals and guides in PDF

Models OK Alarm clock radio most viewed

Other categories OK

Recent questions about Alarm clock radio OK