Portable Boombox 18502 - Speaker TRUST - Free user manual and instructions

USER MANUAL Portable Boombox 18502 TRUST

www.trust.com/18502/faq Quick Installation Guide Wireless Speaker 18502 Installation

Windows Trust BT Audio Trust BT Audio Pair with this device Trust BT Audio Connected Trust Wireless Audio options Trust BT Audio

- Connect the USB charge cable to the USB port of your laptop or an USB wall charger. - Connect the USB charge cable to the USB power input ‘B’. - Charge the battery for 3 hours. - Power on the speaker by switching the power switch ‘A’ on the rear of the speaker. - Press and hold the standby button ‘J’ for 3 seconds. - The LED indicator ‘D’ will start flashing Blue/ Red alternating (paring mode). If the LED indicator is not flashing blue/ red alternating. Press and hold the play/pause button for 5sec. If a passcode is requested during the configuration of the device Use ‘0000’.

Standard Configuration iPad/ iPhone - Go to ‘Settings’. - Go to the ‘General’ settings. - Go to ‘Bluetooth’. - Make sure that Bluetooth is on. - Select ‘Trust BT Audio’ in the list of Bluetooth devices. (make sure the speaker is in pairing mode) When the device status is ‘paired’, your device is ready to use.

Android Go to ‘Settings’. For Android 4.0 systems the settings button can be found under the clock. Go to ‘Wireless and network’. Go to ‘Bluetooth settings’ and press ‘search for devices’ if needed. Select ‘Trust BT Audio’ in the list of Bluetooth devices (make sure the speaker is in pairing mode).

Press and hold ‘Trust BT Audio’ to go to the options menu of the wireless audio device. 11 Make sure that the device is ‘Connected’ and the ‘Media’ profile is selected. Your device is ready to use.

13 - Select ‘Trust BT Audio’ in the list of Bluetooth devices (make sure the speaker is in pairing mode).

When the device is successfully added, your device is ready to use.

- Set the ‘Trust BT Audio’ device as your default device.

Configuration on a Mac system - Click on the Bluetooth icon in the taskbar. - Make sure Bluetooth is on. - Go to ‘set up Bluetooth device…’. - Select ‘Trust BT Audio’ in the list of Bluetooth devices (make sure the device is in pairing mode). - Click on ‘Continue’. - If the pairing attempt was unsuccessful. Go to ‘Passcode options’. - Select ‘Use a specific passcode’. - The passcode to use is ‘0000’. - Click on ‘ok’. - Click on ‘Continue’.

Your device is now ready to use.

Play, Pause/Call pickup/Bluetooth pairing (I) Press the play/pause button. To pause or play music. When receiving a phone call press this button to answer the call. Volume control (G,H) Press the volume +/- to regulate the volume. Change audio source (J) Press to switch between Bluetooth and the 3.5mm audio input. Previous/Next (E,F) Press to skip to the previous or next song.Bluetooth Audio Speaker - USER’S MANUAL

Trouble shooting Problem Solution Can’t connect the BT speaker to my device - Make sure that the BT speaker is powered on and not in standby mode. See step 3. - Make sure that the BT speaker is in paring mode. Press and hold the play/pause button for 5 sec. to activate the pairing mode. - Move the BT speaker closer to your audio source (maximum distance 10m under ideal circumstances) - Repeat the standard configuration steps for your device (iPad/iPhone, Android, Windows, Mac). - The speaker can only be paired with one device simultaneously. - If a passcode is requested. Use ‘0000’.

No Sound - Make sure that Bluetooth is enabled on your device. - When using Bluetooth, make sure that there is no audio cable connected to the 3.5mm audio input. - Repeat the standard configuration steps for your device. (iPad/iPhone, Android, Windows, Mac) - Your BT speaker is too far from your device (maximum distance 10m under ideal circumstances). - Charge the speaker - If you are using the product around large metal surfaces, remove the metal surface or move you product away from the metal surface. - Walls and Floors drastically reduce the range of the product. Move the BT speaker closer to your audio source. - Move the BT speaker away from other wireless devices (like Wireless network routers, mouse and keyboard). Distorted Sound

Sound volume is low - Check the volume setting of your device. (Tablet, Smartphone, PC) LED light keeps blinking re/blue after pairing - This is common behaviour after the first time pairing with a device. Put the speaker in standby and power the speaker back on. If your problem is not solved, please contact the helpdesk at www.trust.com/18502/faqBluetooth Audio Speaker - USER’S MANUAL