MUM58MG60 - Food Processor BOSCH - Free user manual and instructions

Product type	Multi-function food processor
Brand	BOSCH
Model	MUM58MG60
Power supply	Mains connection
Number of speeds	2 speeds + Pulse button (M)
Mixing bowl capacity	Approx. 3.9 L (estimate)
Included accessories	Universal blade with sheath, dough hook, whisk disc, reversible thick/thin slicing disc, reversible coarse/fine grating disc, reversible slicing/grating disc, blender (1L bowl, lid with funnel), universal grinder (cup, blade holder accessory for blender/grinder and for grinding), seal, pusher
Drives	Main drive for rotating accessories
Safety	Motor stops if bowl/lid incorrectly positioned; sharp blades protected; instructions to avoid injury
Cleaning	Detachable parts (except motor block) dishwasher-safe; do not immerse base unit
Storage	Accessories stored in bowl to save space
Warranty	Terms according to country of purchase; keep proof of purchase

Frequently Asked Questions - MUM58MG60 BOSCH

What types of preparations can I make with the MUM58MG60 food processor?

This appliance can mix, knead, whisk, chop, grate, blend, and grind. You can make doughs (yeast, brioche), creams (whipped cream, mayonnaise), sliced/grated vegetables, purées, sorbets, spreads, and much more.

How to properly install the mixing bowl?

Place the bowl on the base unit aligning the arrow on the bowl with the dot on the unit, then turn it clockwise until it stops. To remove, turn counter-clockwise.

Can I put the accessories in the dishwasher?

Yes, most parts (bowl, lid, discs, etc.) are dishwasher-safe. However, the blade holder accessory for the blender/grinder must be washed by hand under running water. Never immerse the base unit in water.

What to do if the appliance does not start or turns off during use?

Check that the bowl, lid, and accessories are correctly positioned and locked. Set the switch to 0/off, reposition the parts, then restart. If the problem persists, contact customer service.

How to use the Pulse (M) function?

The M position (pulse button) allows momentary operation at maximum speed. Hold the rotary switch at M for the desired duration. Release to stop. Ideal for blending or chopping in bursts.

Can I blend hot liquids with the blender?

Yes, but with caution: pour a maximum of 0.4 liters of very hot or foaming liquid. Steam may escape through the funnel. Hold the lid firmly during operation.

How to avoid injuries with the sharp blades?

Never touch the blades with bare hands. Use a brush to clean them. Store the universal blade in its sheath. For discs, grip them by the central plastic part. Never insert fingers into the feed openings.

What is the maximum capacity of the mixing bowl?

The mixing bowl can hold approximately 3.9 liters. For liquid or foaming preparations, do not exceed 0.4 liters. For solids, do not fill beyond the MAX mark if indicated.

How to use the universal grinder to grind spices?

Place spices in the cup (respect the MAX mark), put the seal and the grinding blade holder accessory, lock by turning counterclockwise. Turn the cup over, attach it to the appliance, then select speed M or high until the desired fineness.

Where to find detailed recipes?

The instruction manual includes a Recipes section with instructions for yeast dough, sorbets, mayonnaise, whipped cream, etc. You can also check the Bosch website for additional ideas.

USER MANUAL MUM58MG60 BOSCH

Register your new Bosch now: www.bosch-home.com/welcome

MCM3...

BOSCH

Congratulations on the purchase of your new BOSCH appliance.

You can find further information about our products on our web page.

Contents

For your safety 13

Overview 15

Operation 15

Cleaning and servicing 18

Storage 19

Troubleshooting 19

Recipes/Ingredients/Processing 19

Instructions on disposal 21

Warranty conditions 21

For your safety

Before use, read these instructions carefully to familiarize yourself with important safety and operating instructions for this appliance.

If the instructions for correct use of the appliance are not observed, the manufacturer's liability for any resulting damage will be excluded.

This appliance is designed for processing normal household quantities in the home or similar quantities in non-industrial applications. Non-industrial applications include, for example, use in employee kitchens in shops, offices, agricultural and other commercial businesses, as well as use by guests in boarding houses, small hotels, and similar dwellings.

Use the appliance for processing normal amounts of food for the household; see the "Recipe examples" section.

This appliance is suitable for mixing, kneading, beating, cutting, and shredding food. Other applications are possible if accessories approved by the manufacturer are used. It must not be used for processing other objects or substances.

Use the appliance with original accessories only.

Please keep the operating instructions in a safe place. If passing on the appliance to a third party, always include the operating instructions.

A General safety instructions

Risk of electric shock

The appliance must not be used by children.

The appliance and its power cord must be kept away from children. Appliances can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.

Children shall not play with the appliance.

Connect and operate the appliance only in accordance with the specifications on the rating plate. Only use indoors. Do not use the appliance if the power cord and/or appliance are damaged.

Before replacing accessories or additional parts that move during operation, switch off the appliance and disconnect it from the power supply. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling, or cleaning. Do not place the power cord over sharp edges or hot surfaces. To prevent injury, a damaged power cord must be replaced by the manufacturer, its customer service, or a similarly qualified person. Only our customer service may repair the appliance.

Safety instructions for this appliance

Risk of injury

Risk of electric shock

If the power is interrupted, the appliance remains switched on and restarts when the power is restored.

Never immerse the base unit in liquids or place under running water and do not clean in the dishwasher.

Before rectifying a fault, pull out the mains plug.

Risk of injury from the rotating tools!

While the appliance is operating, never place fingers in the mixing bowl. Always use the pusher for adding ingredients.

After switching off, the drive continues running for a short time.

Change tools only when the drive is at a standstill.

Risk of injury from sharp blades/rotating drive!

Never reach into the attached blender jug!

Do not remove/attach the blender jug until the drive has stopped.

Do not remove/attach the universal cutter jug until the drive has stopped.

Risk of injury from sharp blades!

Do not touch blades of the universal blade with bare hands. When not in use, always store the universal blade in the blade guard. Clean them with a brush.

Do not grip the sharp blades or edges of the cutting discs.

Grip the discs by the plastic part in the centre only!

Do not place fingers in the feed tube. Only use the pusher when adding more ingredients.

Do not touch blades of the blade insert with bare hands.

Clean them with a brush.

Risk of scalding!

If processing hot liquids, steam escapes through the funnel in the lid.

Add a max. 0.4 litres of hot or frothing liquid.

Risk of injury!

Never assemble accessories on the base unit.

Explanation of the symbols on the appliance or accessory

Caution! Rotating tools.

Do not place fingers in the feed tube.

Lock blade insert in the blender or universal cutter jug.

Remove blade insert from the blender or universal cutter jug.

Blade insert with blender/cutting blade

Blade insert with grinding blade

Overview

The instructions describe different features of the appliance. Figure 1 shows an overview of the model.

Please fold out the illustrated pages.

Fig. A

Base unit

1 Rotary switch 0/off = Stop M = Instantaneous switching at maximum speed, hold switch for required blending duration. Settings 1-2, Operating speed: 1 = low speed - slow, 2 = high speed - fast. 2 Drive 3 Cord store 4 Bowl 5 Tool holder 6 Tools *

a Universal blade with blade guard b Kneading hook c Chopping disc

7 Cutting discs *

a Slicing reversible disc - thick/thin b Shredding reversible disc - coarse/fine c Reversible slicing/shredding disc

8 Lid

a Filler opening b Pusher

Accessories *

9 Blade insert with blender/cutting blade and seal 10 Blade insert with grinding blade and seal 11 Universal cutter jug

12 Blender jug 13 Lid for blender

a Filler opening b Funnel-shaped stopper

• for some models:

With the universal cutter use the appliance at full power (according to the recipe). You can find the recipe on the illustrated pages (Fig. F).

If the universal cutter is not included with the hand blender, it can be ordered from customer service (order no. 12005833).

Operation

Before operating the appliance and accessories for the first time, clean thoroughly; see "Cleaning and servicing".

Preparation

• Place the base unit on a smooth, clean surface.
• Pull cable out of the base unit to the required length.

i Important information

Use only the rotary switch to switch the appliance on or off. - Never switch the appliance off by rotating the bowl, the blender or a tool. - Do not switch the appliance on unless tools or accessories have been completely attached.

Bowl with accessories/tools

Risk of injury from the rotating tools!

While the appliance is operating, never place fingers in the mixing bowl. Always use the pusher for adding ingredients. After switching off, the drive continues running for a short time. Change tools only when the drive is at a standstill.

Warning!

When working with the bowl, the appliance cannot be switched on until the bowl has been attached and the lid has been attached and screwed on tight.

Universal blade

for cutting, mincing, mixing.

Risk of injury from sharp blades!

Do not touch blades of the universal blade with bare hands. When not in use, always store the universal blade in the blade guard. Grip the universal blade by the edge of the plastic handle only.

Kneading hook

for kneading dough and mixing-in ingredients that ought not be cut (e.g. raisins and chocolate chips).

Chopping disc

for cream, egg white and mayonnaise.

Fig. B

• Attach the bowl (arrow on bowl on dot on the appliance) and rotate as far as possible in a clockwise direction.
• Insert tool holder into the bowl.
• Insert universal blade, whisking disc or kneading hook into the tool holder and release.

Note position of the tools when inserting them! Press tools all the way down.

Warning!

Do not add ingredients until the tools have been inserted.

• Add ingredients.
• Attach lid with pusher (match arrow on lid on dot on bowl) and rotate in a clockwise direction. Lid lug must be located fully in the slot in the bowl handle.
• Insert the mains plug.
• Set the rotary switch to the desired setting.
• To add more ingredients, set the rotary switch to 0/off.
• Remove the pusher and add ingredients through the feed tube. Pusher can be used as a measuring cup.

Cutting discs

Risk of injury from sharp blades!

Do not grip the sharp blades or edges of the cutting discs. Take hold of discs by the edge only! Do not place fingers in the feed tube. Only use the pusher when adding more ingredients.

Slicing reversible disc - thick/thin

for slicing fruit and vegetables.

Process at setting 1.

Identification on the reversible slicing disc: "coarse" for the thick cutting side, "fine" for the thin cutting side

Warning!

The reversible slicing disc is not suitable for slicing hard cheese, bread, rolls or chocolate. Slice boiled, waxy potatoes only when they are cold.

Shredding reversible disc - coarse/fine

for shredding vegetables, fruit and cheese, except for hard cheese (e.g. Parmesan).

Process at setting 1.

Designation on the reversible shredding disc: "2" for the coarse shredding side "4" for the fine shredding side

Warning!

The reversible shredding disc is not suitable for shredding nuts. Shred soft cheese with the coarse side only at setting 2.

Reversible slicing/shredding disc

for slicing and shredding fruit, vegetables and cheese.

Process at setting 2.

Fig. 6

• Attach the bowl (arrow on bowl on dot on the appliance) and rotate as far as possible in a clockwise direction.
• Insert tool holder into the bowl.

Depending on the required use:

• Place cutting disc on tool holder. Turn required slicing/shredding side face up. Place disc on the disc holder so that the drivers on the tool holder grip the opening in the discs.
• Attach lid with pusher (match arrow on lid to arrow on bowl) and rotate in a clockwise direction. Lid lug must be located fully in the slot in the bowl handle.
• Insert the mains plug.
• Set the rotary switch to the desired setting.
• Fill with contents which are to be sliced or shredded.
• When adding contents which are to be sliced or shredded, apply only light pressure to the pusher. Remove the pusher and add ingredients through the feed tube.

Warning!

Empty the bowl before it becomes so full that the cutting or grating contents reach the carrier disc.

After using the appliance

• Set the rotary switch to 0/off.
• Remove mains plug.
• Rotate the lid in an anti-clockwise direction and remove.
• Remove tool:

Take tool holder together with universal blade, whisking disc or kneading hook out of the bowl. Remove the tools from the tool holder. Take out the cutting discs by the plastic stud in the centre. Take tool holder out of the bowl.

• Rotate bowl anti-clockwise and remove.
• Clean all parts, see "Cleaning and servicing".

Blender

Blade insert with blender/cutting blade for mixing liquid or semi-solid food, for cutting/ chopping raw fruit and vegetables, for puréeing food.

Risk of injury from sharp blades/ rotating drive!

Never place fingers in the attached blender!

Do not remove/attach the blender until the drive is at a standstill.

Do not touch blades of the blade insert with bare hands. Clean them with a brush.

Risk of scalding!

If processing hot liquids, steam escapes through the funnel in the lid. Add a max. 0,4 litres of hot or frothing liquid.

Warning!

Blender may be damaged. Do not process deep-frozen ingredients (except ice cubes). Do not operate blender when empty.

• Place seal on the blade insert. Ensure that the seal is positioned correctly.

Important information

If the seal is damaged or not correctly positioned, liquid may run out.

• Insert blade insert with blender/cutting blade into the blender jug and lock anti-clockwise (1).
• Turn blender jug over (blade insert face down).
• Attach the blender jug (match arrow on the jug to the arrow on the appliance) and rotate as far as possible in a clockwise direction.
• Add ingredients. Maximum capacity, liquid = 1.0 litres (frothing or hot liquids max. 0.4 litres). Optimal processing capacity - solids = 80 g.
• Attach lid and press firmly. Hold lid while working.
• Insert the mains plug.
• Set the rotary switch to the desired setting.
• To add more ingredients, set the rotary switch to 0/off.
• Remove the lid and add ingredients or
• remove the funnel and gradually add solid ingredients through the refill opening or
• pour liquid ingredients through the funnel.

After using the appliance

• Set the rotary switch to 0/off.
• Remove mains plug.
• Rotate the blender in an anti-clockwise direction and remove.
• Remove lid.
• Loosen blade insert clockwise and remove from the blender jug.
• Clean all parts, see "Cleaning and servicing".

Universal cutter

Use (depending on model):

• With the blade insert with blender/cutting blade for cutting and chopping meat, hard cheese, onions, herbs, garlic, fruit, vegetables.
• With the blade insert with grinding blade for grinding and cutting fairly small quantities of spices (e.g. pepper, cumin, juniper, cinnamon, dried anise, saffron), grain (e.g. wheat, millet, linseeds), coffee and sugar.

Risk of injury from sharp blades/ rotating drive!

Do not remove/attach the universal cutter until the drive has stopped. Do not touch blades of the blade insert with bare hands. Clean them with a brush.

Fig. F shows guide values for the maximum quantities and processing times when working with the universal cutter.

Fig. 1

• Put down universal cutter jug with the opening face up.
• Add food, which is to be cut, in the jug. Note MAX mark on the jug!
• Place seal on the blade insert. Ensure that the seal is positioned correctly.

Important information

If the seal is damaged or not correctly positioned, liquid may run out.

• Insert blade insert into the universal cutter jug and lock anticlockwise.
• Turn universal cutter over (blade insert face down).
• Attach the universal cutter (arrow on jug on dot on the appliance) and rotate all the way clockwise.
• Insert the mains plug.
• Set the rotary switch to the desired setting.

Note: The longer the appliance remains switched on, the finer the ingredients are cut. Recommendations on using the accessories can be found in the section "Recipes/Ingredients/Processing".

After using the appliance

• Set the rotary switch to 0/off.
• Remove mains plug.
• Rotate universal cutter anti-clockwise and remove.
• Turn universal cutter over (blade insert face up).
• Loosen blade insert clockwise (B) and remove from the universal cutter jug.
• Empty jug.
• Clean all parts, see "Cleaning and servicing".

Cleaning and servicing

The appliance requires no maintenance. Thorough cleaning protects the appliance from damage and keeps it functional. An overview of cleaning the individual parts can be found in Fig. 6.

Risk of electric shock!

Never immerse the base unit in water or place under running water.

Warning!

Surfaces may be damaged. Do not use abrasive cleaning agents.

Note: If processing e.g. carrots and red cabbage, the plastic parts will become discoloured by a red film which can be removed with a few drops of cooking oil.

Cleaning the base unit

• Remove mains plug.
• Wipe the base unit with a damp cloth. If required, use a little detergent.
• Then dry the base unit.

Cleaning the bowl and accessories

Risk of injury from sharp blades!

Do not touch blades of the universal blade with bare hands. Clean them with a brush. Do not grip the sharp blades or edges of the cutting discs. Take hold of discs by the edge only!

All parts are dishwasher-proof.

Do not wedge plastic parts in the dishwasher as they could warp.

Cleaning the blender/universal cutter

Risk of injury from sharp blades!

Do not touch blades of the blade insert with bare hands. When not in use, always store the universal blade in the blade guard. Clean them with a brush.

The blender jug (without blade insert), lid and funnel are dishwasher-proof.

Do not clean the blade insert in the dishwasher, but under running water (do not soak in water). Remove seal for cleaning.

Troubleshooting

Risk of injury!

Before rectifying a fault, pull out the mains plug.

Fault:

Appliance does not start or appliance switches off during operation.

Possible cause:

Bowl or lid or the accessory has not been attached correctly or has become detached.

Remedial action:

• Set the rotary switch to 0/off.
• Correctly attach bowl/lid or accessory and screw on all the way.
• Switch the appliance on again.

Important information

If the fault cannot be eliminated, please contact customer service (see customer service addresses at the end of this booklet).

Storage

Fig. H

The tools can be stored in the bowl to save space.

Recipes/Ingredients/Processing

Tool	Speed	Time	Recipes/Ingredients/Processing
or	low	approx. 1–2 min	Yeast dough Max. 500 g flour 25 g yeast or 1 packet of dried yeast 220 ml milk 1 egg 1 pinch of salt 80 g sugar 60 g butter Graded rind of half a lemon • Add all ingredients (except the milk) to the bowl. • Set rotary switch to a low speed for 10 seconds. • Add milk and stir at low speed for about 1½ minutes. Ingredients should be at the same temperature. When the dough has a smooth appearance, place in a warm location.
	M		Onions, garlic Amount: from 1 onion, quartered, up to 300 g from 1 clove of garlic up to 300 g • Process the onion/garlic until it has been chopped to the required size.
	high		Parsley Amount: from 0 g up to 50 g • Process the onion/garlic until it has been chopped to the required size.
	high		Meat, liver (for mince, steak tartare, etc.) Quantity: 50 g to 500 g • Remove bones, gristle and sinews. Dice the meat. Making sausage meat, stuffing and pâté: • Put meat (beef, pork, veal, poultry, or even fish, etc.) together with other ingredients and spices into the bowl and mix into a dough.
	high	approx. 1.5 min-2 min	Strawberry sorbet 250 g frozen strawberries 100 g icing sugar 180 ml cream • Put all ingredients in the bowl. Switch on immediately, otherwise the mixture will go lumpy. Mix until a creamy sorbet forms.
	high		Beaten egg white Amount: 2 to 6 egg whites • Whisk at high speed.
	high		Whipped cream Quantity: 200 g to 400 g • Whisk at high speed.
	low/high		Mayonnaise 1 egg 1 tsp. mustard 150–200 ml oil 1 tbs. lemon juice or vinegar 1 pinch of salt 1 pinch of sugar Ingredients should be at the same temperature. • Mix all ingredients (except oil) for several seconds at setting 1. • Switch appliance to setting 2, slowly pour oil through the feed tube and mix until the mixture emulsifies. Eat the mayonnaise immediately, do not store.
	high/M		Nuts, almonds Amount: 50g to 200 g • Remove shells completely, otherwise the blender blade will be blunted. • Process the onion/garlic until it has been chopped to the required size.
	high/M		Puréeing fruit or vegetables (Apple sauce, spinach, carrot and tomato purée; raw or cooked) • Put ingredients and spices into the blender and purée.
	high		Chocolate-milk 80 g-100 g cooled chocolate approx. 400 ml hot milk ● Chop up the chocolate in the blender, add the hot milk and mix briefly.
	M		Honey and hazel nut spread 15 g hazelnuts 110 g blossom honey (room temperature) ● Put the nuts in the universal cutter jug and cut with the blender/cutting blade for 20 seconds on setting M. ● Remove the universal cutter jug, turn it over and take out the blade insert. ● Add the honey. Close the universal cutter jug again with the blade and put on the base unit. ● Wait until all the honey has run down over the blade. Then mix everything for 5 seconds on setting M.
	Fig. 1 shows guide values for the maximum quantities and processing times when working with the universal cutter jug and the blade inserts.

Instructions on disposal

This appliance is identified according to the European guideline 2012/19/EU on waste electrical and electronic equipment - WEEE.

The guideline specifies the framework for an EU-wide valid return and re-use of old appliances.

Please ask your dealer or inquire at your local authority about current means of disposal.

Warranty conditions

The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold.

Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased.

The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

Kunpoc: Apx. MaKaapiou Γ' 39, 'EyKωμη -

Aeukwaia - AnykUnpiO tnλ.: 77778007

www.bosch-home.com/tr

www.bosch-yetkiliservisi.com

Do not immerse the main body in water, do not rinse it under running water, and do not put it in the dishwasher.

Unplug the appliance from the socket before cleaning or troubleshooting.

Danger of injury from rotating parts!

Never put your hands into the installed blender jug! The blender jug can only be removed/installed after the drive has stopped.

The universal chopper jug can only be removed/installed after the drive has stopped.

Danger of injury from sharp blades!

Do not touch the universal blade with bare hands.

Do not touch the sharp blades and edges of the discs when cleaning.

Always hold the discs by the plastic element in the middle!

Do not put your hands into the feed chute.

For cleaning, use only a damp cloth.

Insert the insert by hand.

Do not insert hands into the hazardous opening.

Secure the insert in the universal power tool chuck.

Remove the insert from the universal power tool chuck.

Insert with universal power tool blade/knife for cutting

Insert with knife for mixing

Short circuit

The instruction describes different equipment of the device. You will find the model on the label.

Budlaska, unfold the story with the magnetic cap.

Label A

Main block

1 Turn the switch

«0 / off» = STOP

«M» = momentary switching on

With the number of revolutions,

NepemnkauytmyBaTIN npotaROM

acy notpiboro dna nepepo6kn.

Ctyneni 1-2,po6oayuBvNdkictb:

《1》=Hn3bKe YnCNo O6oPoTiB - NOBiJIbHO,

«2» = BINGOKe YINCSNo O6OpOTiB - WBNIko.

2 PnVBiD 3 Bičík dnia kašéniho 4 Yawa 5 YtpnmyBaH hacaDOK

6 HacaKn*

a YHIBePcaJIbHn HIX i3axINCHM KOxyXOM b TaOK dJa 3aMiUyBaHHA C NICK DnA 36nBaHHA

7ДиСКДЯ NOДРi6HHeH*

aДВOCTOPOHHIДИСКДЯHAPI3aHHa -Ha TOBCTI/TOHKI CKN6KN bДBOCTOPOHHa WataKIBHnca-KpynHO/ DiPi6Ho CIOBCTOPOHHI pi3aJIbHNI DnCK- WATKIBHNU

Kpnska

a 3aBaHTaKaYBaIbHn OTBip b ToBxau

Ppnaadn

9 Hix-KCTaBka HOXeM 6JIeHepa / HOXeM DnI NOpi6HeHHi yUciJIbHIOBaem 10 Hix-BCTaBka 3 HOxEM dI npemEJIIOBAHn i yuJIbHIOBaayem 11 KeiNx yHibepcaIbHoro noDi6HIOBaHa

12 KeiNx 6IeHepa

13 Kpnika dIa 6JeHepa

a 3abaHaTaKaYBaIbHn OTBip b BopoHka

B 3aJIeXHNoCTi BiD MoJeJI

YHIBePcAJIbHnI NOpri6HIOBau 3a6e3Neueyec Bam BnKOpNCTaHHMaKcHMaJIbHOI nOTyHKHOCTi npHaLy (3a yMOBn D0TPMaHHB bKa3iBOK, npBeDeHNx B peuENT). PeeENT Bn 3aHaeTe Ha cTOpIHkax 3 MaJIHOHkAMn (MaJIHOHOK F).

Ykuo yHIBepcaIbHn noPi6HOBaH He BXOINb Do KOmPLeKTo, TOni Bi MoKeTe 3aMOBInu Ioro uepe3 cnyx6y cepBicy (Homep dJa 3aMOBHeHHr: 12005833).

YnpabnHH

Ipeed nepwnm BnKOpncTaNHm npnlaTa npnaDra cnid peTeNbHO nouNCTHT, INB. «OunueHHr i DORJAD>.

Iirotobka

BctaHOBNtO OCHOBHn 6NoK Ha pIBHi, ctaibhHi Ta YnCTi NOBepxHi. Kabelb BNTaRHTn 3 OCHOBHO 6IOKy Ha Heo6XiHy DOBxHNY.

Baxnbi Bka3iBkn

-Прилад ВИКаТи ТА ВИМКаТи ВИКЛЮЧNO NOBOPOTHM ПЕмИКачEM. Hi BЯkomy pa3i He BVMnKaTH npHnAid, NOBepTaOuN caUy, 6JIeHdEep HacaIky. - PpNJaJd MoKHa TIlbKn BMNkaTn, RkUO HacaJKN YI PpNJaJd JIOBHiCTHO BCTaHOBJIeHI.

Usha 3 npnlaandm/hacaKaM

Hebe3neKa npaHennn o6epTOBmHn Hacaikamn!

Пд уас роботи hikоли He BCTpOMnTnyкн до чаш.Дпя пдштOBxuBaHнIHrpeDiEHTIB KOpNCTyBaTnC 3aBkDInIITOBxauem.

Nicra BmKHeHH npVBid ue deekn yac proobku ruxatys. HacaKn MoKha MInrtn TInbKn Nicra 3ylnHKn npBody.

Attention

The device can be operated with the installed bowl, as well as with the installed and closed lid.

Universal

For chopping, mixing, blending.

Danger of injury from sharp blades!

Do not touch the universal blade with your hands. When not in use, always store the universal blade in the protective case. The universal blade can only be held by the plastic rim.

Lid for blending

For blending food that does not need to be chopped (e.g., sauces, chocolate chips).

Disc for whipping

For egg whites, whipped cream, and meringue.

Chopper

Insert the attachment (press the shaft down until it clicks into place on the device) and turn it clockwise to lock. Insert the chopper. Insert the universal blade, the whipping disc, or the blending lid, and press down until it stops. Pay attention to the position of the attachments when inserting! Press the attachments down to the stop.

Attention

Load the products to be processed only after installing the attachments.

Load the ingredients. Place the lid with the spout (the arrow on the lid points to the mark on the device) and turn it clockwise. The lid spout must fit into the opening of the handle. Insert the power plug into the outlet. Set the rotary switch to the desired level. - Press. To add ingredients, set the rotary switch to «0/off».

Pour the ingredients through the filling opening. The pourer can be used as a measuring cup.

Discs for chopping

Danger! Sharp blades!

Do not touch the sharp blades or knives after use.

Discard the blade!

Do not insert the filling opening. Use only the pourer for filling.

Double-sided disc for slicing/shredding

In case of damage or incorrect placement, the blade may come out.

Insert the blade insert with the blade facing up, align the blade with the arrow on the disc, and lock it against the direction of the arrow (B). - Turn the blade insert (blade down). Install the blade insert (arrow on the insert pointing to the arrow on the disc) and turn it clockwise until it stops.

Filling ingredients.

Maximum quantity of liquid = 1.0 liter (for thick or thin liquids, maximum 0.4 liters).

Optimal quantity for processing solid products = 80 grams.

Install the lid and lock it during operation. Insert the pourer into the opening. Set the rotary switch to the desired level. ... Turn the lid and fill with ingredients or pour through the filling opening.

or

Fill the ingredients through the pourer.

Pio80n

Set the rotary switch to "0/off". Remove the plug from the socket. - Turn the blade holder counterclockwise and remove. Remove the lid. Insert the blade insert by turning it clockwise (B) and remove from the chopper bowl. - Clean all parts, see "Cleaning and care"

Universal chopper

Use (depending on model):

With blade insert for chopping and mincing meat, hard cheese, onions, herbs, vegetables, fruits.

With blade insert for chopping and mincing small amounts of ingredients (e.g., peppers, grains, nuts, spices, dried herbs, saffron), seeds (e.g., wheat, rice, flaxseed), or for grinding.

Danger of injury from sharp blades/rotating drive!

Universal chopper: To attach/remove the blade insert, always use the pusher. Do not touch the blade insert with your fingers. For cleaning, use only the brush.

The illustration shows approximate data for maximum quantity and processing time for working with the universal chopper.

Figure E

Place the chopper bowl opening upwards. Load the products intended for chopping into the bowl. Pay attention to the "MAX" marking on the bowl! - Place the blade insert correctly. Check the correct placement of the blade insert.

Important instructions

In case of damage or incorrect placement of the blade insert, the chopper may leak.

Insert the blade insert (A/D) into the universal chopper bowl and lock it by turning clockwise (B) - Turn the universal chopper upside down (with the blade insert downwards). - Place the universal chopper (arrow on the bowl pointing towards the appliance) and turn it clockwise until it stops. Insert the plug into the socket. Set the rotary switch to the desired speed.

Note: The appliance remains warm during use, so the products are processed more quickly. Recommendations for use are given in the section "Recipes/Ingredients/Processing".

Set the rotary switch to "0/off". Remove the plug from the socket.

• Turn the universal support for the grater and remove it.
• Turn the universal support (with the insert) back. Unscrew the insert counterclockwise (and remove it from the universal support. Release the pusher.
• Release all parts, see "Cleaning and maintenance".

Cleaning and maintenance

The appliance requires technical maintenance. Regular cleaning prevents damage to the appliance and ensures its functionality. The inspection and cleaning of individual parts is shown in figure G.

Danger of electric shock!

The main unit must never be immersed in water and never held under running water.

Warning!

Damage may occur on the surface. Do not use sharp or abrasive agents for cleaning.

Note: During processing, e.g., carrots and red cabbage, discoloration may form on plastic parts, which can be removed with a few drops of cooking oil.

Cleaning the main unit

Remove the plug from the socket. - Wipe the main unit with a damp cloth. If necessary, use a small amount of mild detergent. - Then dry the appliance thoroughly.

Cleaning the accessories

Danger: sharp blades!

Do not touch the blades with bare hands. Use the scraper for cleaning. Do not touch sharp knives and blade discs for chopping. Take blades only by the edge!

All parts can be washed in the dishwasher.

Do not wash plastic parts in the dishwasher, as they may deform.

Cleaning the blender/universal chopper

Danger: sharp blades!

Do not touch the blade insert with bare hands. When not using the universal chopper, always store it in the protective case. Use the scraper for cleaning.

The blender jug (without the blade insert), the lid, and the funnel can be washed in the dishwasher.

Do not wash the blade insert in the dishwasher, as it may become dull (do not leave it in water).

Cleaning and maintenance.

Help in case of malfunction.

Danger: sharp blades!

Unplug the appliance from the outlet before cleaning or maintenance.

Malfunction:

The appliance does not turn on or turns off during operation.

MoxlinBa pnuHa:

Ya7a a6o KpuiuKa qI npilaJn HnnpaBnIbHO BCTaHOBJIeHi a6o BnIJI3 KpIJIeHNJ.

UcynHHeHHeNoJaKn:

BctaHOBHTIIOBOPOTNIpeMnKaHa 0 / off " -Чашу/Кршу КИ Ппладд ВстановиnpаВиьно Та Шьно 3aKpyТИТи Doунору. - IpoDobKHTn po6Oty 3 npuJaIOM.

BaxklnBa Bka3iBka

KuBn He MoKeTe UcyHyTn HecnpaBnHcIb TaKm YHOM,ToDi 3BepHITcB,6yDb NaCkA,do CnyK6n cepBicy (DnBtbc aApceN cny6 cepBicy HanpkiHci ciie6bpoUpyn).

36epiraHH

MAJIHOK

He Tporatb octpbie HOxN BByCTyNbI DnCKOB-N3MeJbUHTeJIeN.

Дискп браль толъко за пл actMaCCOBую DeТаь посердинe!

He onyckaTb pyKn B 3aIrpy3OuHoe OTBepCTne.ДЯ NOJaTaNKBaHnA NcNoJb3OBaTb TOnbKO TOnKaTeNb. He Kacatbcra TOnbIMn pyKaMn Je3Bn HOKa-BCTaBKn. ДЯ ChIcTKN NcNoJb3OBaTb UeTky.

Onachoctb ownapnBaHna!

Ipn nepepa6oTke B 6bHepepe ropaynx npOdyKTOB uepe3 BOpOHky B KpbIuKe BbIXoHnT nap. 3aONHnTb MaKcHmym 0,4 IInTp a ropaye nnCINbHOneHnIeSca XnIDKOCTN.

Onachoctb TpaBMnpoBaHn!

HnKoIa He co6npaTb npHaIeJXHOCTn Ha OCHOBHOM 6JIOKe.

Controls on the appliance and accessories

Caution! Rotating attachments.

Do not put hands into the loading opening.

Lock the insert blade in the blender beaker of the universal grinder.

Remove the insert blade from the blender beaker of the universal grinder.

Insert blade with blender blade/chopping blade

Insert blade with pre-crushing blade

Overview of the set

The instructions describe the various types of equipment of the appliance. In the figure you will find an overview of the model.

Please open the page with the figures.

Figure A

Main unit

1 Rotary switch

«O/off» = stop

«M» = momentary activation at maximum speed, hold the switch for the required time before

Speed 1-2, working speed:

"1" = Low number of revolutions - slow,

"2" = High number of revolutions - fast.

2 Drive

3 Cable compartment

4 Mixing nozzle

5 Nozzle change

6 Nozzles*

a Universal knife with protective cover

b Mixing nozzle

c Whipping disc

7 Discs-grinders

a Double-sided cutting disc - thick/thin slices

b Double-sided shredding disc - coarse/fine

c Double-sided cutting/shredding disc

a loading hole in the pusher

Accessories*

9 pusher with blender blade/chopper blade with pusher 10 pusher with chopper blade with seal 11 universal chopper beaker 12 blender beaker 13 blender lid

a loading hole in the funnel

• depending on the model

The universal chopper ensures you get the full power of the appliance (when following the instructions given in the recipe). You will find recipes on the pages with illustrations (fig. I).

If the universal chopper is not included in the delivery set, it can be ordered through the service department (order number: 12005833).

Operation

Before first use, carefully clean the appliance and accessories, see "Cleaning and care".

Preparation

• Place the main unit on a smooth, stable surface. Pull the cable out of the main unit to the required length.

Important notes

• The appliance can only be switched on and off using the rotary switch.
• Never switch off the appliance by turning the mixing bowl, blender, or attachment. - The appliance can only be switched on after the attachments have been fully installed.

Mixing bowl with blades/attachments

Danger of injury from rotating blades!

During operation, never put your hands into the mixing bowl. Always use the pusher to add ingredients.

After switching off, the drive continues to run for a while. The blades can only be replaced after the drive has stopped.

Attention!

When working with the mixing bowl, the drive may only be switched on with the mixing bowl installed, as well as with the lid installed and tightly closed.

Universal blade

Do not touch the sharp blades or the cutting edges of the discs.

Do not immerse large parts in the dishwasher, as deformation may occur.

Cleaning the blender/universal chopper

Danger of injury from sharp blades!

Do not touch the blade insert with bare hands. Always store the universal blade in the protective cover when not in use. For cleaning, use a brush.

The blender glass (without blade insert), lid, and filler cap can be washed in the dishwasher.

Do not wash the blade insert in the dishwasher, but rinse it under running water (do not leave it in water). For cleaning, use a brush.

Recipes/ingredients/processing

KHEECK, OMO=37ydu, 426057, B. CnKBoAyn, d.152, ran [phone], dacs. [phone]

KIAA008, OMO=37ydu, 426057, B. CnKBoAyn, d.152, ran [phone], dacs. [phone]

KIAA008, OMO=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoAyn, d.152, ran [phone], dacs. [phone]

MKYKTCS, OMO=37ydu, 426057, B. CnKBoAyn, d.152, ran [phone], dacs. [phone]

KAKA3Hb, OMO=37ydu, 426057, B. CnKBoAyn, d.152, ran [phone], dacs. [phone]

KAKA3Hb, OMO=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

KAKA3Hb, OMO=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoAyn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran [phone], dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-100, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-101, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-102, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-103, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-104, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-105, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-106, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-107, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-108, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-109, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-110, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-111, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-112, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-113, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-114, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-115, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-116, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-117, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-118, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-119, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-120, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-121, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-122, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-123, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-124, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-125, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-126, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-127, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-128, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-129, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-130, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-131, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-132, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-133, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-134, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-135, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-136, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-137, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-138, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-139, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-140, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-141, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-142, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-143, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-144, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-145, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-146, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-147, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-148, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-149, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-150, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-151, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-152, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-153, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-154, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-155, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-156, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-157, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-158, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-159, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-160, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-161, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-162, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-163, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-164, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-165, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-166, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-167, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-168, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-169, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-170, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-171, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-172, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-173, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-174, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-175, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-176, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-177, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-178, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-180, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-181, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-182, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-183, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-184, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-185, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-186, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-187, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-188, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-189, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-190, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-191, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-192, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-193, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-194, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-195, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-196, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-197, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-200, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-201, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-202, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-203, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-204, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-205, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-206, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-207, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-208, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-209, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-210, dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-209; dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-210; dacs. [phone]

MUKIAPK, ILOU=37ydu, 426057, B. CnKBoByn, d.152, ran (3417) 77-10-209; dacs. (3411)

PCCN

BAEAKH, IJ Koubunhouni POMah CepBeeBhu, 655010, Topocbayn, n.15, ren.[phone], dacq. [phone]

AEBAH, IJ Koubunhouni POMah CepBeeBhu, 655010, Topocbayn, n.15, ren.[phone], dacq. [phone]

AEBAH, IJ Koubunhouni POMah CepBeeBhu, 655009, Topocbayn, n.15, ren.[phone], dacq. [phone]

AEBAH, IJ Koubunhouni POMah CepBeeBhu, 655009, Topocbayn, n.15, ren.[phone], dacq. [phone], dacq. [phone]

AEBAH, IJ Koubunhouni POMah CepBeeBhu, 655009, Topocbayn, n.15, ren.[phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dac q. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. (390)22- 65-64, dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq.[phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. (390)22-65 -64, dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. (387)[phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. (387)26-65 73, dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dac q. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. (390)22- 65-73, dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq.[phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. (390)22-65 73, dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dac q. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dac q. (390)22- 65-73, dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. (390)22 -65-73, dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. [phone], dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390）22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq.(390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64,dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)22-64, dacq. (390)2

The product is intended for use at ambient temperatures above 0°C and relative humidity not exceeding 93%.

If the product has been exposed to negative temperatures for a long time, it must be kept at room temperature for several hours before use.

The rules for product sales are determined by the manufacturer and trade organizations in accordance with the requirements of current legislation.

Instructions for disposal of the product are contained in the operating instructions and may be obtained from municipal authorities.

The product has a shelf life, and the manufacturer guarantees compliance with the shelf life. This guarantee is valid for the entire shelf life, provided that the product is stored, transported, and used (applied) in accordance with the operating instructions. The shelf life is indicated on the product packaging and in the accompanying documentation.

The product may be marked with the conformity mark (EAC) and the product type (if applicable) on the product, packaging, and/or accompanying documentation.

The operating documentation provided with the product may include this information, operating instructions (manual), and information about warranty and service maintenance.

Product labeling is carried out in accordance with the requirements of the Technical Regulations of the Customs Union, on the product, packaging, and/or accompanying documentation, and may also be applied by other means that ensure complete and reliable information about the product at the place of sale.

Products that have passed conformity assessment in accordance with the requirements of the Technical Regulations of the Customs Union are marked with a single mark of product circulation on the market of the member states of the Customs Union.

Products that were released into free circulation by authorized customs authorities and whose free circulation on the territory of the Customs Union before 15.03.2015 was confirmed by Russian documents in the EAC system or other documents of the Customs Union may be marked with the conformity mark.

Operating documents for the product are provided in Russian. Operating documents in the state languages of the member states of the Customs Union, in addition to Russian, may be obtained free of charge from the trade organization of the corresponding member state of the Customs Union.

Information about the product configuration is presented on the packaging and can be requested by phone [phone], and is also available on the Internet on the manufacturer's website at http://www.bosch-bt.ru.

• On 09.02.2015, BSH Hausgeräte GmbH, Carl-Wery-Str. 34, 81739 Munich, Germany, was renamed to BSH Hausgeräte GmbH, Carl-Wery-Str. 34, 81739 Munich, Germany.

Мо德尔	АлгорбатоньийTNи	Сергейникат COOTВЕТБИЗ			Сtrпан- Изrogenытèle
		Релострацоньий homор	Дата вiocуни	Дeйстуев对接
Соковский
MCP3000	CNZP3	C-DE.AЯ46.B.01025	12.11.12	11.11.17	Словеня
MES25A0	CNC.J03	C-DE.Aя46.B.62431	27.02.14	26.02.19	Китай
MES25C0	CNC.J03	C-DE.Aя46.B.62431	27.02.14	26.02.19	Китай
MES25G0	CNC.J03	C-DE.Aя46.B.62431	27.02.14	26.02.19	Китай
MES3500	CNC.J03	C-DE.Aя46.B.62431	27.02.14	26.02.19	Китай
MES4000	CNC.J04	C-DE.Aя46.B.62431	27.02.14	26.02.19	Китай
MES4010	CNC.J05	C-DE.Aя46.B.62431	27.02.14	26.02.19	Китай
Рози
MAS4201N	CNAS11ST1	C-DE.Aя46.B.63040	31.03.14	30.03.19	Турши
MAS4601N	CNAS11EV1	C-DE.Aя46.B.63040	31.03.14	30.03.19	Турши
MAS6200N	CNAS12	C-DE.Aя46.B.63040	31.03.14	30.03.19	Турши
MAS9101N	AS9ST	C-DE.Aя46.B.63040	31.03.14	30.03.19	Турши
Минерсы, блидеры, Искльный
MFQ3010	CNHR19	C-DE.Aя46.B.63982	11.06.14	10.06.19	Словеня
MFQ3020	CNHR19	C-DE.Aя46.B.63982	11.06.14	10.06.19	Словеня
MFQ3520	CNHR17	C-DE.Aя46.B.63982	11.06.14	10.06.19	Словеня
MFQ3030	CNHR19	C-DE.Aя46.B.63982	11.06.14	10.06.19	Словеня
MFQ3555	CNHR18	C-DE.Aя46.B.63982	11.06.14	10.06.19	Словеня
MFQ4070	CNHR22	C-DE.Aя46.B.63982	11.06.14	10.06.19	Словеня
MFQ4020	CNHR22	C-DE.Aя46.B.63982	11.06.14	10.06.19	Словеня
Мо德尔	Албашаонь Тип	Сергшкоат сооветсь			Сtrал- нз�отовпь
		Релострацонь homор	Дата вдочи	Демстуевatro
Мійсөрь, бүнөдөрь, Илмөдүлөн
MFQ4080	CNHR22	C-DE.AR46.B.63982	11.06.14	10.06.19	Слобеня
MFQ36480	CNHR27	C-DE.AR46.B.63982	11.06.14	10.06.19	Слобеня
MFQ36440	CNHR27	C-DE.AR46.B.63982	11.06.14	10.06.19	Слобеня
MFQ36460	CNHR27	C-DE.AR46.B.63982	11.06.14	10.06.19	Слобеня
MFQ36GOLD	CNHR27	C-DE.AR46.B.63982	11.06.14	10.06.19	Слобеня
MMB1001	CNSM03ST	C-DE.AR46.B.66627	21.11.14	20.11.19	Туся
MMB2001	CNSM03EV	C-DE.AR46.B.66627	21.11.14	20.11.19	Туся
MMR1501	CNCM13ST2	C-DE.AR46.B.61496	17.01.14	16.01.19	Слобеня
MMR08A1	CNCM13ST1	C-DE.AR46.B.61496	17.01.14	16.01.19	Слобеня
MMR15A1	CNCM13ST2	C-DE.AR46.B.61496	17.01.14	16.01.19	Слобеня
MSM6B100	CNHR11	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM6B150	CNHR11	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM6B300	CNHR12	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM6B700	CNHR12	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM67PE	CNHR13	C-DE.AR46.B.65723	18.09.14	17.09.19	Слобеня
MSM6700	CNHR9EV	C-DE.AR46.B.65723	18.09.14	17.09.19	Слобеня
MSM6B500	CNHR12	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM6B250	CNHR11	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM66050RU	CNHR25	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM66150RU	CNHR25	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM67140RU	CNHR26	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM67160RU	CNHR26	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM66130	CNHR25	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM67170	CNHR26	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM67SPORT	CNHR26	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM66155	CNHR25	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM67160	CNHR28	C-DE.AR46.B.62888	20.08.13	19.08.18	Слобеня
MSM67165	CNHR28	C-DE.AR46.B.62888	20.08.13	19.08.18	Слобеня
MSM67180	CNHR28	C-DE.AR46.B.62888	20.08.13	19.08.18	Слобеня
MSM68190	CNHR29	C-DE.AR46.B.62888	20.08.13	19.08.18	Слобеня
MSM64035	CNHR24	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM66020	CNHR25	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM66110	CNHR25	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM67130	CNHR28	C-DE.AR46.B.62888	20.08.13	19.08.18	Слобеня
MSM67140	CNHR28	C-DE.AR46.B.62888	20.08.13	19.08.18	Слобеня
MSM64155RU	CNHR24	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM67165RU	CNHR26	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM67190	CNHR26FP	C-DE.AR46.B.65723	18.09.14	17.09.19	Слобеня
MSM67150RU	CNHR26	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM671XO	CNHR24	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM671XO	CNHR26FP	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM671X1	CNHR26FP	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
MSM681X1	CNHR29	C-DE.AR46.B.59536	20.08.13	19.08.18	Слобеня
MSM681X2	CNHR29	C-DE.AR46.B.59536	20.08.13	19.08.18	Слобеня
MSM68400	CNHR12	C-DE.AR46.B.62888	21.03.14	20.03.19	Слобеня
Кухонны комбайы
MCM2050	CNCM11ST	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MCM2150	CNCM11ST1	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MCM4000	CNCM20	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MCM4100	CNCM20	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MCM4200	CNCM21	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MCM4250	CNCM21	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MCM62020	CNCM30	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MCM64051	CNCM30	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MCM64085	CNCM30	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MCM68840	CNCM30	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MCM68885	CNCM30	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MUM4406	CNUM5ST	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MUM4427	CNUM5ST	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MUM4657	CNUM5ST	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MUM4855	CNUM5ST	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MUM4856EU	CNUM5ST	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MUM4880	CNUM5ST	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MUM52131	CNUM50	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MUM54240	CNUM51	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MUM54251	CNUM51	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MUM56S40	CNUM51	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MUM57830	CNUM51	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MUM57860	CNUM51	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MUMXL20C	CNUM70	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
MUMXL40G	CNUM70	C-DE.AR46.B.60779	26.11.13	25.11.18	Слобеня
Кофемолik
MKM6003	KM13	C-DE.AR46.B.62081	14.02.14	13.02.19	Слобеня
MKM6000	KM13	C-DE.AR46.B.62081	14.02.14	13.02.19	Слобеня
Мэсубуши
MFW1501	SFW1	C-DE.AR46.B.61421	13.01.14	12.01.19	Слобеня
MFW1545	CNFW2	C-DE.AR46.B.61421	13.01.14	12.01.19	Слобеня
MFW1550	CNFW5	C-DE.AR46.B.59504	16.08.13	15.08.18	Ктей
MFW45020	CNFW5	C-DE.AR46.B.59504	16.08.13	15.08.18	Ктей
MFW45120	CNFW5	C-DE.AR46.B.59504	16.08.13	15.08.18	Ктей
MFW66020	CNFW6	C-DE.AR46.B.59504	16.08.13	15.08.18	Ктей
MFW67440	CNFW7	C-DE.AR46.B.59504	16.08.13	15.08.18	Ктей
MFW67600	CNFW7	C-DE.AR46.B.59504	16.08.13	15.08.18	Ктей
MFW68640	CNFW8	C-DE.AR46.B.59504	16.08.13	15.08.18	Ктей
MFW68660	CNFW8	C-DE.AR46.B.59504	16.08.13	15.08.18	Ктей
MFW68680	CNFW8	C-DE.AR46.B.59504	16.08.13	15.08.18	Ктей

4/19/2012

a. with y ≤ 1 y ≥ 2 y ≤ 3 y ≥ 4

(waste electrical and electronic equipment - WEEE).

4.15

a

1

aiee 1 aegaae eae

y j 1

therefore a_1 = 2^(1 - 99)

aal algall jlllai

a

1a

j 1

i 1

1. giiue 2.

a gaiil aelbail / blyi

1

Jusll Jaa: 2g jauu Jb

1

1

.

a

aill 1jy olw j p

gill 111

i 1

cLg（/）JsS

aBb

olal uSc aolusll ac gull ll boll

1. 1.

Therefore, cos(angle BAC) = BC/AC = 3.

The minimum value of the denominator is k.

K

i

by

1. Given vectors and with | | = | |

Therefore, g( x) = - 1/x + 2/x + 1 = - 1/x + 1( 1 - x) x + 1 = - 1/x + ( 1 - x) x + 1 = 1/x + ( 1 - x) x

Therefore, a₁ = 2, a_{n + 1} = _n1 + _n2

Therefore, the original inequality holds.

()

a

1a

Therefore, |x'| = (1/|x|) * |r1^2 + r2^2 + r3^2| ≤ (3/4)|x|^2

1

1.1 2n 3n 1.1 2n 3n

:

mountain

1

!

1

oall jai jj jai jai jai jai jai jai jai jai

aaslll (uabll) ubll. aylg

yll (wblb) wblb,

ooj u jki loic yie lao iie

i

pLi/

1

JUJIALLIJI (e) JLIALLIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJIJI

(1)

1. a > 0 且 b² - 4ac > 0 无解

jglgall jolclj

∴ 1,2,3 ⇒ 1,3 ⇒ 2,3 ⇒ 3,4 ⇒ 4,5

12

a 1 ≤ b 1 ≤ c₁

1

J 1

J 1

1

A

boll / bly

* ( 1,2,... ,n)

ρ ( x,y) = µ ( x) y

8

9

10

11

cell b

15iS 15iS i 15i0

F

1234567890

a 13

(12005833 1111)

Quadrilateral BJ

i j 1

joll pale jzr jy 10 yall jll

alil

A

yj jzjj

1. 1,2,3,4

1

0/off

1 1

G

aalall bll sdd

1-2

1 1

1 2

2

yj 3

4

Joell 5

* 6

Ssw 8g a 100000000000000000000000000000000000000000000

b

aJ 1

gag lijia jia jia cai gao all jia jia jia jia

L

G

ar-1 . ar-3 aole σ ar-4 jieill ar-7 4yj ar-8 Jube jilj 0e Lua cai ar-8 jieeieieieieieieieieieieieieieieieieieieieieieieieieieieie ar-9. 1 ar-11 jaii joi ulill ar-11

sio J 1

g j 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

jglzlll 1g 1 1

(5) = | | , = | | , = | |

AE United Arab Emirates,

BSH Home Appliances FZE

Round About 13,

Plot Nr MO-0532A

Jebel Ali Free Zone – Dubai

Tel.: [phone]

mailto:[e-mail]

www.bosch-home.com/ae

Republic of Albania

AERTECH SH.P.K.

Rruga Qemal Stafa

New building opposite the General Prosecutor's Office

General Prosecutor's Office

Entrance C, 10th floor

Tirana

Tel.: [phone]

mailto:[e-mail]

HEATHERTON, Victoria 3202

Tel.: [phone]

mailto:[e-mail]

www.bosch-home.com.au

BA Bosna i Hercegovina, Bosnia-Herzegovina

"HIGH" d.o.o.

Gradačačka 29b

71000 Sarajevo

Info-Line: 061 100 905

Fax: [phone]

mailto:[e-mail]

BE Belgique, Belgie, Belgium

BSH Home Appliances S.A.

European Trade Center Building, 5th floor

1784 Sofia

Tel.: [phone]

Fax: [phone]

newsletter:informacia.servis-bg@

bshg.com

www.bosch.home.bg

BH Bahrain,

Khalaifat Est.

P.O.Box 5111

Manama

Tel.: [phone]

mailto:[e-mail]

BY Belarus, Belarus

LLC "BSH Household Appliances"

Tel.: [phone]

mailto:[e-mail]

CH Switzerland, Suisse, Svizzera, Switzerland

BSH Hausgeräte AG

+7snt/min (alv 24%

To arrange an engineer visit, to

order spare parts and accessories

or for product advice please visit

www.bosch-home.co.uk

or call

*Calls are charged at the basic rate, please check with your telephone service provider for exact charges

GR Greece, Eλλας

BSH Ikiakes Siskeves A.B.E.

Central Branch Service

17 km E.O. Athinon-Lamias &

Potamou 20

14564 Kifisia

Unit 1 & 2, 3rd Floor

North Block, Skyway House

3 Sham Mong Road

Tai Kok Tsui, Kowloon

Hong Kong

Tel.: [phone]

Fax: [phone]

mailto:[e-mail]

www.bosch-home.cn

HR Hrvatska, Croatia

BSH kućni uređaji d.o.o.

Kneza Branimira 22

10000 Zagreb

Tel.: [phone]

Fax: [phone]

mailto:informacije.servis-hr@

bshg.com

www.bosch-home.com/hr

www.bosch-home.com/hu

IE Republic of Ireland

BSH Home Appliances Ltd.

Unit F4, Ballymount Drive

Ballymount Industrial Estate

Walkinstown

Dublin 12

Service Requests,

Spares and Accessories

Tel.: [phone]*

Fax: [phone]

www.bosch-home.co.uk

*0.03 € per minute at peak.

Off peak 0.0088 € per minute

IL Israel,

C/S/B Home Appliance Ltd.

Uiel Building

2, Hamelacha St.

Industrial Park North

71293 Lod

Tel.: [phone]

Fax: [phone]

mailto:[e-mail]

www.bosch-home.co.il

IN India, Bharat,

BSH Household Appliances

Mfg. Pvt. Ltd.

Arena House, 2nd Floor, Main Bldg,

Plot No. 103, Road No. 12, MIDC,

Andheri East

Mumbai 400 093

www.bosch-home.com/in

IS Iceland

Smith & Norland hf.

Noatuni 4

105 Reykjavik

Tel.: [phone]

Fax: [phone]

www.sminor.is

IT Italia, Italy

www.bosch-home.com/it

KZ Kazakhstan, Kazakhstan

IP Turebekov Yerzhan

Nurmanovich

Jangeldina str. 15

Shimkent 160018

Tel.: [phone]

mailto:[e-mail]

LB Lebanon,

Teheni, Hana & Co.

Boulevard Dora 4043 Beyrouth

P.O.Box 90449

Jdeideh 1202 2040

Tel.: [phone]

mailto:[e-mail]

LT Lietuva, Lithuania

Senuku prekybos centras UAB

Jonavos g. 62

44192 Kaunas

Tel.: [phone]

Fax: [phone]

www.senukai.lt

LU Luxembourg

General Serviss Limited

Bullu street 70c

1067 Riga

Tel.: [phone]

mailto:[e-mail]

Elkor Serviss

Brivibas gatve 201

1039 Riga

Tel.: [phone]; -36

mailto:[e-mail]

MD Moldova

S.R.L. "Rialto-Studio"

str. Pușkin 98

2012 Chișinău

Tel./Fax: [phone]

mailto:[e-mail]

ME Crna Gora, Montenegro

Elektronika komerc

Ul. Slobode 17

84000 Bijelo Polje

Tel./Fax: [phone]

Mobil: 069324812

mailto:ekobosch.servis@

t-com.me

MK Macedonia, MaKeDoHnJa

GORENEC

Jane Sandanski 69 lok.3

1000 Skopje

Tel.: [phone]

Mobil: 070 697 463

mailto:[e-mail]

MT Malta

Oxford House Ltd.

Notabile Road

Mriehel BKR 14

Tel.: [phone]

Fax: [phone]

www.oxfordhouse.com.mt

MV Raajeyge Jumhooriyyaa, Maledives

Lintel Investments

Ma. Maadheli, Majeedhee Magu Malé

Tel.: [phone]

mailto:mohamed.zuhuree@

lintel.com.mv

NL Nederland, Netherlands

Unit F 2, 4 Orbit Drive

Mairangi Bay

Auckland 0632

Tel.: [phone]

Fax: [phone]

mailto:[e-mail]

www.bosch-home.co.nz

PL Polska, Poland

SA Kingdom Saudi Arabia,

a i + 1 = 1/2 · a i · pⁱ

Abdul Latif Jameel Electronics

and Airconditioning Co. Ltd.

BOSCH Service centre,

Kilo 5 Old Makkah Road

(Next to Toyota), Jamiah Dist.

P.O.Box 7997

Jeddah 21472

Tel.: [phone]

mailto:[e-mail]

www.aljazeera.com.sa

SE Sverige, Sweden

BSH Hushàllsapparater AB

Landsvagen 32

169 29 Solna

Tel.: [phone] local rate

mailto:Bosch-Service-SE@

bshg.com

www.bosch-home.se

SG Singapore, Singapore

BSH Home Appliances Pte. Ltd.

TECHPLACE I and

Mo Kio Avenue 10

Block 4012 #01-01

569628 Singapore

Tel.: [phone]

Fax: [phone]

mailto:[e-mail]

www.bosch-home.com.sg

SI Slovenija, Slovenia

BSH Hišni aparati d.o.o.

Litostrojska 48

1000 Ljubljana

Tel.: [phone]

Fax: [phone]

www.bosch-home.com/tr

4th floor, No. 112 Sec 1

Chung Hsiao E Road

Taipei ROC 100

Tel.: [phone]

mailto:[e-mail]

UA Ukraine, Ukraine

LLC "BSH Household Appliances"

Tel.: [phone]

mailto:[e-mail]

gama-electronics.com

XS Srbija, Serbia

BSH Kućni aparati d.o.o.

Milutina Milankovica 11a

11070 Novi Beograd

Tel.: [phone]

Fax: [phone]

mailto:[e-mail]

www.bosch-home.rs

ZA South Africa

BSH Home Appliances (Pty) Ltd.

15th Road Randjespark

Private Bag X36, Randjespark

1685 Midrand - Johannesburg

1685 Midrand - Johannesburg

Tel.: [phone]

Fax: [phone]

mailto:applianceserviceza@

bshg.com

www.bosch-home.com/zai

MCM3100W
MCM3110W
MCM3200W
MCM3201B
MCM3401M
MCM3501M

MCM3100W
MCM3110W
MCM3200W	✓	✓
MCM3201B	✓	✓
MCM3401M		✓		✓
MCM3501M	✓	✓	✓	✓