Uniprodo — 45 free PDF user manuals

Q: How to set the temperature of the Uniprodo UNI_POOLS_23 pool?

To change the temperature of your Uniprodo UNI_POOLS_23 pool, follow these steps: Press the input button to enter setting mode - the screen blinks to confirm the active mode Use the temperature increase and decrease buttons to select the desired value The available temperature range is between 20°C and 40°C Confirm your selection by pressing the input button again Make sure the HEATER button is activated for the system to start heating Important: With a heating power of 1800 W, the system heats the water at a rate of 1-2°C per hour. The total time to reach your target temperature can take between 12 and 24 hours, depending on the initial water temperature and external conditions. Heating activates automatically when the temperature drops 2°C below the value you have programmed.

Q: What is the model or designation of the filter cartridge?

The manual for the Uniprodo UNI_POOLS_16 does not provide a catalog number or specific designation for the filter cartridge. The system includes a 30 W pump with filter cartridge , but the exact model is not specified in the PDF. To find the suitable replacement cartridge, you have two options: Check the original packaging - The part number is usually found on the box or the original label of the pool. Contact Uniprodo service - By providing the reference UNI_POOLS_16, the service can give you the exact number of the compatible cartridge. In the meantime, please note that according to the manual, the cartridge should be cleaned every 72 to 120 hours of use and replaced monthly depending on the intensity of use.

Models Uniprodo most viewed

User manual Uniprodo : user manuals and guides in PDF

Models Uniprodo most viewed

Browse manuals Uniprodo by appliance type

Recent questions about devices Uniprodo