UNI_SGS_02 - Garden solar shower Uniprodo - Free user manual and instructions

USER MANUAL UNI_SGS_02 Uniprodo

This User Manual has been translated for your convenience using machine translation. Reasonable efforts have been made to provide an accurate translation; however, no automated translation is perfect nor is it intended to replace human translators. The official User Manual is the English version. Any discrepancies or differences created in the translation are not binding and have no legal effect for compliance or enforcement purposes. If any questions arise related to the accuracy of the information contained in the User Manual, please refer to the English version of those contents which is the official version.

Technical data

Parameter description Parameter value
Product name	Solar garden shower
Model	UNI_SGS_02
Capacity [l]	35
Max water pressure [bar]	3.5
Dimensions [width x depth x height; mm]	2170 x 180 x 400
Weight [kg]	9

1. General description

The user manual is designed to assist in the safe and trouble-free use of the device. The product is designed and manufactured in accordance with strict technical guidelines, using state-of-the-art technologies and components. Additionally, it is produced in compliance with the most stringent quality standards.

DO NOT USE THE DEVICE UNLESS YOU HAVE THOROUGHLY READ AND UNDERSTOOD THIS USER MANUAL.

To increase the product life of the device and to ensure trouble-free operation, use it in accordance with this user manual and regularly perform maintenance tasks. The technical data and specifications in this user manual are up to date. The manufacturer reserves the right to make changes associated with quality improvement. The device is designed to reduce noise emission risks to a minimum, taking into account technological progress and noise reduction opportunities.

Legend

The product satisfies the relevant safety standards.

Read instructions before use.

WARNING! or CAUTION! or REMEMBER! Applicable to the given situation.

(generall warning sign)

PLEASE NOTE! Drawings in this manual are for illustration purposes only and in some details may differ from the actual product.

2. Usage safety

ATTENTION!

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in serious injury or even death.

The terms "device" or "product" are used in the warnings and instructions to refer to:

Solar garden shower

USAGE SAFETY

a) If you are unsure about whether the product is operating correctly or if you find damage, please contact the manufacturer's service centre.
b) Only the manufacturer's service centre may make repairs to the product. Do not attempt to make repairs yourself!
c) Please keep this manual available for future reference. If this device is passed on to a third party, the manual must be passed on with it.
d) Keep packaging elements and small assembly parts in a place not available to children.
e) If this device is used together with another equipment, the remaining instructions for use shall also be followed.
f) The device is not designed to be handled by persons (including children) with limited mental and sensory functions or persons lacking relevant experience and/or knowledge unless they are supervised by a person responsible for their safety or they have received instruction on how to operate the device.
g) Close the nearest water supply valve to the unit before making any adjustments, repairs or replacements. This preventive measure reduces the risk of an accident.
h) Device repair or maintenance should be carried out by qualified persons, only using original spare parts. This will ensure safe use.
i) To ensure the operational integrity of the device, do not remove factory-fitted guards and do not loosen any screws.
j) When transporting and handling the device between the warehouse and the destination, observe the occupational health and safety principles for manual transport operations which apply in the country where the device will be used.
k) Clean the device regularly to prevent stubborn grime from accumulating.
I) The device is not a toy. Cleaning and maintenance may not be carried out by children without supervision by an adult person.
m) It is forbidden to interfere with the structure of the device in order to change its parameters or construction.
n) Do not allow the device to freeze. During winter or when the ambient temperature drops below 0^ , dismantle the device and store it in a dry place.
o} Do not use salt or other methods against freezing.
p) The water pressure must not exceed 3.5 bar.
q) To avoid burns, please pay attention to set the water temperature control lever to the "cold" position before using the product. Then adjust the desired temperature.

ATTENTION! Despite the safe design of the device and its protective features, and despite the use of additional elements protecting the operator, there is still a slight risk of accident or injury when using the device. Stay alert and use common sense when using the device.

3. Use guidelines

The product is a shower designed for use in gardens, outdoor pools, spas and campsites. The shower uses solar energy to heat the water.

The product is intended for home use only.

The user is liable for any damage resulting from unintended use of the device.

3.1. Device description

Please note: The illustrations of this product can be found on the last page of the instruction manual.

3.2. Assembling the device

INSTALLATION INSTRUCTIONS

1. 1 Choose a location that will receive as much sunlight as possible for the solar shower.
2. Mount the lower stand with shower base (B) to a concrete slab or wooden base using four screws, washers and nuts (K).

3. Attach the shower head (D) with gasket (G) to the extension pipe (E). Attach the extension pipe (E) with gasket (F) to the threads of the upper base (A). These parts should only be adjusted by hand. Do not use a spanner.

4. Place the gasket ("O-RING") (C) on the lower base (B).

5. Lift the upper stand (A) onto the lower stand (B). Connect the hoses.
6. Turn the locking ring clockwise to connect the two stands (A + B) . The handle and the shower head (D) must point in the same direction.

3.3. Device use

INITIAL SETTING OF THE SOLAR SHOWER

1. Open the handle and turn it to the "hot" position. This will ensure that no air bubbles are trapped in the hoses when filling with water.
2. Connect the garden hose to the hose connector (J). Turn on the water to fill the solar shower. It will take a few minutes to fill the solar shower.
3. When the water flows out of the shower handset (D) turn off the handle. The solar shower now starts to heat the water.
4. Depending on the available sunlight and the outside temperature, it will take several hours for the solar shower to fully heat the water.
5. In strong sunlight, the water temperature of the solar shower can reach up to 60^ .

WARNING: To avoid scalding, set the handle to the "cold" water position before using the solar shower. Then set the desired temperature.

3.4. Cleaning and maintenance

a) Use only non-corrosive cleaners to clean the surface.
b) The device must be regularly inspected to check its technical efficiency and spot any damage.
c) Use a soft, damp cloth for cleaning.
d) Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal spatula) because they may damage the surface material of the appliance.
e) Do not clean the device with an acidic substance, agents of medical purposes, thinners, fuel, oils or other chemical substances because it may damage the device.

f) f) WINTERING

• Turn off the water and disconnect the garden hose.
• Open the handle and turn it to the "hot" position to drain the water from the hoses and solar shower (this takes a few minutes). Do not touch or rotate the handle when emptying, otherwise water will stop flowing.
• Turn the locking ring counterclockwise to unscrew the upper stand (A) from the lower stand (B). Then disconnect the hose connection. Now water will flow from the shower.
• Remove the lower stand (B) and pour out the remaining water.
  Clean and dry all parts of the solar shower.
  In winter, store all parts of the solar shower indoors and in a dry place.

g) NOTE:

• Do not use salt or other antifreeze agents.
• Recommended water pressure: maximum 3.5 bar. Under no circumstances should a solar shower be powered by an additional pump or domestic water source.
• Heating water causes it to expand. Thanks to this, water escapes from the shower head to a minimal extent.
• When using the shower for the first time, to get rid of the plastic and oil smell, wait a few minutes for the water to drain and then clean the internal parts of the shower under running water.

INSTALLATIE INSTRUCTIES

For the disposal of the device please consider and act according to the national and local rules and regulations.

CONTACT

expondo Polska sp. z o.o. sp. k.