Q: Why does the pump of my Arktic 271575 ice maker make noise?

The noise from the pump is normal and expected on the Arktic 271575. The water circuit pump (part no. 17) operates automatically when filling the tank and produces a characteristic motor sound. During the ice production cycle, you may hear several different noises: The motor noise of the pump itself The clicking of the water valve as it opens to fill the evaporator A gurgling sound of water circulating between the evaporator and the tank The compressor producing pulsed or high-frequency sounds The circulation of the refrigerant (R290) The cracking of ice cubes detaching during the harvesting phase The pump operates according to water pressure specifications of 0.04 to 0.6 MPa. This can cause slight variations in noise intensity from one cycle to another. When to worry: If the noise changes radically, becomes excessively loud, or if the machine stops producing ice, refer to the troubleshooting section of your manual or contact support.

Q: How does the wastewater drainage and pump of the Arktic 271575 work?

The Arktic 271575 has its own water pump that automatically ensures the circulation of water in the cooling circuit. Pumping System The water circuit pump operates automatically when filling the tank . You will hear a distinctive sound from the electric motor - this is normal and indicates that the pump is transferring water from the evaporator to the storage tank. Water Drainage The device comes with a 2-meter white drainage hose to connect to your sink. The hose connects to the drain outlet located at the back of the machine (reference no. 7). The water produced during cooling is automatically circulated in the system - you do not need to do anything manually during normal operation. Tank Emptying The tank drainage hose is marked “H” . To completely empty the machine (for example, before a prolonged period of inactivity), simply detach this hose and let the water flow out.

Q: What does the error code ER2 mean on my Arktic 232170 refrigerator and how can I resolve it?

The error ER2 indicates a cooling compartment sensor issue (temperature sensor). This is usually due to a poor connection or a detached cable. Possible causes: Cable of the sensor not properly inserted into the terminal Cable torn or loose Poorly secured connector How to resolve: Turn off the refrigerator Locate the cable terminals at the cooling compartment Check that all cables are properly inserted into the terminals If a cable is torn, reinsert it firmly and screw it back in completely Turn the appliance back on and wait a few minutes If the error persists after checking the connections, this indicates a failure of the sensor itself. In this case, the intervention of a qualified technician is necessary. Important note: Never attempt to work on the cooling circuit yourself. The refrigerant used (R404a/R507) is flammable.

Q: What noise does the ice maker make when filling the tray?

The noise you hear when filling the tray is completely normal for your Arktic 271575. Expected noises during filling Your device's manual identifies several characteristic sounds that occur during the filling cycle: Water pump noise : a distinctive electric motor sound Water valve noise : splashes when the valve opens Circulation system noise : a characteristic gurgling sound created by the flow of water between the evaporator and the reservoir Compressor noise : pulsed or high-frequency sounds from the high-efficiency compressor All these noises are normal and indicate that the cooling system and water circulation are functioning properly. The machine has a filling cycle of 11 to 30 minutes depending on conditions. When to worry Contact support if: No noise is produced and no water flows The pump is silent and ice cubes are not forming You hear abnormal noises very different from those described above

Q: What are the steps to install an Arktic 271292 ice maker?

Step-by-step installation: Preparing the location Place the unit on a horizontal, stable, and heat-resistant surface Leave at least 20 cm of space around the unit for proper ventilation Avoid direct sunlight or reflections that may interfere with the infrared sensor Electrical connection Use a 220-240V, 50/60 Hz electrical outlet that is easily accessible The machine must be connected to a dedicated outlet (no other devices on the same circuit) Do not use an extension cord - plug directly into a properly grounded outlet Before first use Wait 2 hours after installation before plugging in the unit (refrigerant stabilization) Ensure the unit is not tilted beyond 5 degrees Start the self-cleaning cycle: fill the water tank to the maximum and press the ON/OFF/Clean button for 5 seconds The self-cleaning program lasts 30 minutes Empty and clean the interior after the cycle Your ice maker is now ready to produce ice. It produces about 12 kg of ice per day, with a cycle of 8-13 minutes depending on the size of the ice cubes and the ambient temperature.

Question 1

Why does the pump of my Arktic 271575 ice maker make noise?

Accepted Answer

The noise from the pump is normal and expected on the Arktic 271575. The water circuit pump (part no. 17) operates automatically when filling the tank and produces a characteristic motor sound.

During the ice production cycle, you may hear several different noises:

The motor noise of the pump itself
The clicking of the water valve as it opens to fill the evaporator
A gurgling sound of water circulating between the evaporator and the tank
The compressor producing pulsed or high-frequency sounds
The circulation of the refrigerant (R290)
The cracking of ice cubes detaching during the harvesting phase

The pump operates according to water pressure specifications of 0.04 to 0.6 MPa. This can cause slight variations in noise intensity from one cycle to another.

When to worry: If the noise changes radically, becomes excessively loud, or if the machine stops producing ice, refer to the troubleshooting section of your manual or contact support.

Question 2

How does the wastewater drainage and pump of the Arktic 271575 work?

Accepted Answer

The Arktic 271575 has its own water pump that automatically ensures the circulation of water in the cooling circuit.

Pumping System

The water circuit pump operates automatically when filling the tank. You will hear a distinctive sound from the electric motor - this is normal and indicates that the pump is transferring water from the evaporator to the storage tank.

Water Drainage

The device comes with a 2-meter white drainage hose to connect to your sink. The hose connects to the drain outlet located at the back of the machine (reference no. 7).

The water produced during cooling is automatically circulated in the system - you do not need to do anything manually during normal operation.

Tank Emptying

The tank drainage hose is marked “H”. To completely empty the machine (for example, before a prolonged period of inactivity), simply detach this hose and let the water flow out.

Question 3

What does the error code ER2 mean on my Arktic 232170 refrigerator and how can I resolve it?

Accepted Answer

The error ER2 indicates a cooling compartment sensor issue (temperature sensor). This is usually due to a poor connection or a detached cable.

Possible causes:

Cable of the sensor not properly inserted into the terminal
Cable torn or loose
Poorly secured connector

How to resolve:

Turn off the refrigerator
Locate the cable terminals at the cooling compartment
Check that all cables are properly inserted into the terminals
If a cable is torn, reinsert it firmly and screw it back in completely
Turn the appliance back on and wait a few minutes

If the error persists after checking the connections, this indicates a failure of the sensor itself. In this case, the intervention of a qualified technician is necessary.

Important note: Never attempt to work on the cooling circuit yourself. The refrigerant used (R404a/R507) is flammable.

Question 4

What noise does the ice maker make when filling the tray?

Accepted Answer

The noise you hear when filling the tray is completely normal for your Arktic 271575.

Expected noises during filling

Your device's manual identifies several characteristic sounds that occur during the filling cycle:

Water pump noise: a distinctive electric motor sound
Water valve noise: splashes when the valve opens
Circulation system noise: a characteristic gurgling sound created by the flow of water between the evaporator and the reservoir
Compressor noise: pulsed or high-frequency sounds from the high-efficiency compressor

All these noises are normal and indicate that the cooling system and water circulation are functioning properly. The machine has a filling cycle of 11 to 30 minutes depending on conditions.

When to worry

Contact support if:

No noise is produced and no water flows
The pump is silent and ice cubes are not forming
You hear abnormal noises very different from those described above

Question 5

What does the error code dA mean on the Arktic 232118 refrigerator?

Accepted Answer

The error code dA means that the refrigerator door has been left open or did not close properly. It is a safety detection system to alert you.

To resolve this issue:

Check that the items stored inside are not preventing the door from closing
Inspect the condition of the seal - it should not be damaged or stuck
Make sure the door closes properly without excessive resistance
Wait a few seconds before reopening the door: a slight vacuum forms upon closing and needs to normalize
If the code persists after a proper closure, turn off the appliance for a few minutes, then turn it back on

This appliance also has other error codes (P1, P2, HA, LA, EA, CA) that alert you to other faults in the cooling system or sensors. If the dA code disappears after correction and does not reappear, no further action is necessary.

Question 6

What are the steps to install an Arktic 271292 ice maker?

Accepted Answer

Step-by-step installation:

Preparing the location

Place the unit on a horizontal, stable, and heat-resistant surface
Leave at least 20 cm of space around the unit for proper ventilation
Avoid direct sunlight or reflections that may interfere with the infrared sensor

Electrical connection

Use a 220-240V, 50/60 Hz electrical outlet that is easily accessible
The machine must be connected to a dedicated outlet (no other devices on the same circuit)
Do not use an extension cord - plug directly into a properly grounded outlet

Before first use

Wait 2 hours after installation before plugging in the unit (refrigerant stabilization)
Ensure the unit is not tilted beyond 5 degrees
Start the self-cleaning cycle: fill the water tank to the maximum and press the ON/OFF/Clean button for 5 seconds
The self-cleaning program lasts 30 minutes
Empty and clean the interior after the cycle

Your ice maker is now ready to produce ice. It produces about 12 kg of ice per day, with a cycle of 8-13 minutes depending on the size of the ice cubes and the ambient temperature.

User manual Arktic : user manuals and guides in PDF

Models Arktic most viewed

Browse manuals Arktic by appliance type

Recent questions about devices Arktic