Q: What does the error code ER2 mean on my Arktic 232170 refrigerator and how can I resolve it?

The error ER2 indicates a cooling compartment sensor issue (temperature sensor). This is usually due to a poor connection or a detached cable. Possible causes: Cable of the sensor not properly inserted into the terminal Cable torn or loose Poorly secured connector How to resolve: Turn off the refrigerator Locate the cable terminals at the cooling compartment Check that all cables are properly inserted into the terminals If a cable is torn, reinsert it firmly and screw it back in completely Turn the appliance back on and wait a few minutes If the error persists after checking the connections, this indicates a failure of the sensor itself. In this case, the intervention of a qualified technician is necessary. Important note: Never attempt to work on the cooling circuit yourself. The refrigerant used (R404a/R507) is flammable.

Question 1

What does the error code ER2 mean on my Arktic 232170 refrigerator and how can I resolve it?

Accepted Answer

The error ER2 indicates a cooling compartment sensor issue (temperature sensor). This is usually due to a poor connection or a detached cable.

Possible causes:

Cable of the sensor not properly inserted into the terminal
Cable torn or loose
Poorly secured connector

How to resolve:

Turn off the refrigerator
Locate the cable terminals at the cooling compartment
Check that all cables are properly inserted into the terminals
If a cable is torn, reinsert it firmly and screw it back in completely
Turn the appliance back on and wait a few minutes

If the error persists after checking the connections, this indicates a failure of the sensor itself. In this case, the intervention of a qualified technician is necessary.

Important note: Never attempt to work on the cooling circuit yourself. The refrigerant used (R404a/R507) is flammable.

Question 2

What does the error code dA mean on the Arktic 232118 refrigerator?

Accepted Answer

The error code dA means that the refrigerator door has been left open or did not close properly. It is a safety detection system to alert you.

To resolve this issue:

Check that the items stored inside are not preventing the door from closing
Inspect the condition of the seal - it should not be damaged or stuck
Make sure the door closes properly without excessive resistance
Wait a few seconds before reopening the door: a slight vacuum forms upon closing and needs to normalize
If the code persists after a proper closure, turn off the appliance for a few minutes, then turn it back on

This appliance also has other error codes (P1, P2, HA, LA, EA, CA) that alert you to other faults in the cooling system or sensors. If the dA code disappears after correction and does not reappear, no further action is necessary.

User manual Arktic Refrigerator : user manuals and guides in PDF

Models Arktic Refrigerator most viewed

Other categories Arktic

Recent questions about Refrigerator Arktic