Question 1

How to receive radio stations with the Fenton AV150BT?

Accepted Answer

The Fenton AV150BT is equipped with a built-in FM tuner that allows you to receive radio stations. Here’s how to do it:

Select FM mode

Press the Mode button to switch to the FM source. The screen will then display FM along with the frequency and the name of the station.

Change station

Use the CH- and CH+ buttons on the remote to tune to the previous or next station. The FM frequency will be displayed on the receiver's screen.

Connect the FM antenna

At the back of the device, there is a connector for the FM antenna. Plug the supplied FM antenna into this connector to improve reception quality. For a better signal, position the antenna near a window.

Tip: If you are using the Bluetooth connection, remove the Bluetooth antenna from the back panel to avoid interference.

Question 2

How to adjust the lighting effects on the Fenton FT12LED speaker?

Accepted Answer

To adjust the lighting effects on the Fenton FT12LED speaker, follow these steps:

Locate the button or the rotary knob dedicated to the LED lights on the speaker. It is usually identified by a light symbol or an inscription like "LED" or "Light".
Press or turn this control to change the lighting modes. You can alternate between different lighting effects, colors, or patterns offered by the device.
To turn off the lights, continue to press or turn until the LEDs turn off, if this option is available.

If the adjustment does not respond, make sure the speaker is powered and that you are using the correct control. These settings are designed to be simple and accessible directly on the device.

User manual Fenton : user manuals and guides in PDF

Models Fenton most viewed

Browse manuals Fenton by appliance type

Recent questions about devices Fenton