Q: What are the dimensions of the Titano car seat?

The dimensions of the Giordani Titano are as follows: Width x Depth x Height: 44 x 55 x 65 cm Weight: Approximately 12 kg Note that these measurements may vary slightly depending on the recline level of the seat and the adjustment of the headrest, both of which are adjustable on this model. The seat can be used from birth up to approximately 12 years old (child up to 150 cm in height), with three modes of operation: forward-facing with a 5-point harness, rear-facing with a 5-point harness, and booster mode with the vehicle's seat belt.

Q: How to loosen the straps of the Giordani Adonis seat?

To loosen the straps of the Giordani Adonis car seat, follow these steps: Step 1: Press the adjustment button Locate the harness adjustment button (part 6 according to the manual) and press it to release the tension of the straps. Step 2: Loosen the straps Once the button is pressed, pull the shoulder straps outward to lighten them. This action is necessary before placing your child in the seat. Step 3: Use the adjustment strap You can also use the harness adjustment strap (part 7) to finely adjust the length of the straps according to your child's body shape. Important safety point Ensure that the straps are not twisted and that they fit properly to the child's body to guarantee optimal retention and safety.

Question 1

How to install and mount the Titano car seat from Giordani?

Accepted Answer

The installation of the Titano car seat is simple and does not require complex assembly. Here are the main steps:

ISOFIX Installation

Remove the ISOFIX connectors from their housing.
Firmly click them onto the vehicle's anchors until you hear a click.
Check the color indicator: green = correctly installed, red = faulty attachment.

Top Tether Attachment

After activating the ISOFIX connectors, attach the third anchorage point (Top Tether) to the designated attachment point in the vehicle.

Installation in Booster Mode

For children from 100 to 150 cm, use the vehicle's 3-point seat belt directly.

Checks Before Use

Ensure that the foldable rear seat is locked.
There should be no play between the child seat and the vehicle's bench.

The components of the Titano (removable baby insert, 5-point harness, adjustable headrest) are already integrated and do not require additional assembly.

Question 2

How to install the canopy of the Giordani Sunrise 2.0 stroller?

Accepted Answer

Installing the canopy of the Giordani Sunrise 2.0 stroller is very simple and requires no tools.

Necessary items

The plastic joints integrated into the side tubes of the structure
The fastening Velcros provided with the canopy

Installation steps

Position the canopy above the structure by aligning the plastic joints located along the side tubes
Secure the canopy by attaching it to the joints using the Velcros provided for this purpose

Important for safety: Never use the rain cover without the canopy, as this could cause suffocation of the child.

Question 3

Where is the safety buckle of the Titano car seat positioned when it is facing the road?

Accepted Answer

The safety buckle (fibbia) of the Titano when facing the road (driving direction) is an integral part of the 5-point safety harness (component #6 according to the manual diagram). Here are the precise details:

Position and operation

The safety buckle is located between the child's legs, at the intersection of the two abdominal straps of the 5-point harness.
It securely holds the harness in place and prevents the system from accidentally detaching.
When the seat is oriented facing the road, the harness straps should go slightly above the shoulder (and not at shoulder height as in rear-facing position).

Correct adjustment

After closing the buckle, you should be able to insert one finger (about 1 cm) between the harness and the child's body.
If the space is too wide, use the harness adjustment button (component #10) to tighten it.
The abdominal straps should remain low and well tightened above the pelvis to ensure optimal restraint.

Important

The Titano should only be used facing the road if the child is at least 15 months old and 76 cm tall. Before this age, the seat must always remain in the rear-facing position for maximum protection.

Question 4

What are the dimensions of the Titano car seat?

Accepted Answer

The dimensions of the Giordani Titano are as follows:

Width x Depth x Height: 44 x 55 x 65 cm
Weight: Approximately 12 kg

Note that these measurements may vary slightly depending on the recline level of the seat and the adjustment of the headrest, both of which are adjustable on this model. The seat can be used from birth up to approximately 12 years old (child up to 150 cm in height), with three modes of operation: forward-facing with a 5-point harness, rear-facing with a 5-point harness, and booster mode with the vehicle's seat belt.

Question 5

How to install the Polaris seat at the front of the vehicle?

Accepted Answer

Installing at the front is possible but strongly discouraged. The Polaris Giordani seat should preferably be installed at the back of the vehicle, which remains the safest position for your child.

Mandatory conditions for the front

Deactivate the passenger airbag - This is imperative. The manual states: "Do not use on passenger seats with an activated front airbag!"
Push the passenger seat back as far as possible

Installation steps

Depending on your child's position:

For children 40-105 cm (rear-facing): Front installation is prohibited in this position.
For children 76-150 cm (forward-facing): Push the passenger seat back as far as possible, then follow the instructions in your vehicle's manual to secure the Polaris seat with the seatbelt.

Important: Consult your vehicle's manual for the precise procedure to deactivate the passenger airbag before installing the seat at the front.

Question 6

Can I install the car seat in the back of the car?

Accepted Answer

Yes, you can and you must install the Giordani Polaris seat in the back of the car.

The back of the car is indeed the safest position for your child during your trips. This is the configuration recommended by the manufacturer.

Possible installation positions

Back seat (recommended and safest position)
Front passenger seat (possible only if the airbag is deactivated and the seat is fully pushed back)

Orientation according to the child's size

40-105 cm: ISOFIX installation with Top Tether, rear-facing (against the direction of travel)
76-105 cm: ISOFIX installation with Top Tether, both orientations are allowed
100-150 cm: installation with adult seatbelt and ISOFIX, forward-facing

Make sure your vehicle has ISOFIX anchor points, 3-point seatbelts, and a top tether anchor point for the Top Tether.

Question 7

How to loosen the straps of the Giordani Adonis seat?

Accepted Answer

To loosen the straps of the Giordani Adonis car seat, follow these steps:

Step 1: Press the adjustment button

Locate the harness adjustment button (part 6 according to the manual) and press it to release the tension of the straps.

Step 2: Loosen the straps

Once the button is pressed, pull the shoulder straps outward to lighten them. This action is necessary before placing your child in the seat.

Step 3: Use the adjustment strap

You can also use the harness adjustment strap (part 7) to finely adjust the length of the straps according to your child's body shape.

Important safety point

Ensure that the straps are not twisted and that they fit properly to the child's body to guarantee optimal retention and safety.

Question 8

How many reclining positions does the Giordani Crono car seat have?

Accepted Answer

The Giordani Crono car seat has several adjustable reclining positions, with the number varying according to the child's age group:

Group 76-105 cm (facing forward): 4 adjustable sitting positions (positions 1, 2, 3, and 4)
Group 100-150 cm (facing forward): 1 reclining position available
Group 40-105 cm (facing backward): The seat supports up to 5 rotation positions, with no distinct reclining adjustments specified in the manual

How to adjust the recline: For children in the 76-105 cm group, pull the recline button located on the side of the seat to select the desired recline position.

Always ensure that all safety indicators are green before using the seat.

Question 9

Why doesn't the Titano car seat rotate 360 degrees when it is in the forward-facing position?

Accepted Answer

The Titano car seat is not designed for a full 360-degree rotation when it is in the forward-facing position (senso di marcia). This limitation is intentional and complies with safety standards.

Operation of the Titano rotation

The rotation button located under the seat allows you to switch the car seat between two orientations:

Rear position (rear-facing): recommended from 40 to 105 cm, up to a minimum of 15 months
Forward position (forward-facing): from 15 months AND a minimum of 76 cm

Why no full rotation in forward position

Once the car seat is installed in the forward-facing position (senso di marcia), it must remain locked in this position. This ensures:

The stability and safety of the car seat during travel
Compliance with automotive safety standards (ECE R44/04 or R129/i-Size depending on the model)
Optimal positioning of the ISOFIX attachment points and harness

If your car seat rotates too easily

If the seat rotates easily while installed in the forward position, check the locking:

Check the color indicator (green = properly locked, red = poorly secured)
Ensure that the seatbelt or ISOFIX attachments are properly tightened
Make sure that the rotation button is not accidentally activated while driving

Question 10

Can the Giordani Crono car seat be installed without ISOFIX?

Accepted Answer

Yes, the Giordani Crono can be installed without ISOFIX, but only for children between 100 and 150 cm.

Installation using only the 3-point seatbelt

If your child is between 100 and 150 cm, you can use the vehicle's 3-point seatbelt without ISOFIX connectors. This is the only ISOFIX-free configuration allowed for this seat.

For children from 40 to 105 cm

ISOFIX is mandatory for younger children (40-105 cm). You must use: support leg + ISOFIX connectors + 5-point harness.

Important note

Even for the 100-150 cm group, you have two options:

3-point seatbelt only (without ISOFIX)
ISOFIX + 3-point seatbelt (more secure)

Always consult the Giordani Crono manual to check the green indicators before using the seat.

User manual Giordani : user manuals and guides in PDF

Models Giordani most viewed

Browse manuals Giordani by appliance type

Recent questions about devices Giordani