Q: How to connect the cables to the switch of the Flex MXE 1602?

The Flex MXE 1602 comes with a 4.0-meter power cable with a ready-to-use plug . You do not need to make any manual cable connections to the switch. To use the speed selection switch: The device has a two-speed selector with an anti-engagement mechanism Press the lock button and turn the selector clockwise to reach the desired speed level Never change speed while the motor is running Speed I: high torque mode Speed II: high speed mode If you need to connect the device to a fixed workstation or if you encounter a power issue, ensure that the cable is not damaged and that the wall socket provides a nominal 230V (check the device's nameplate).

Q: What is the purpose of the speed/operation mode selector dial on the Flex MXE 1602?

The Flex MXE 1602 has two selection switches (sometimes referred to as dials): Operation mode selector (no. 10) : Allows you to choose between two operating modes. Speed selector (no. 11) : Allows you to switch between 2 positions: Position I (high torque, for thick materials like mortars or coatings) and Position II (high speed, for low-viscosity liquids like paints and varnishes). These selectors allow you to adapt the mixer to the type of material being processed. Important : Never change these settings while the mixer is operating - the device must be completely stopped before any adjustments.

Question 1

How to replace the grinding plate of the Flex ORE 3-150 EC?

Accepted Answer

To replace the grinding plate of your Flex ORE 3-150 EC, follow these simple steps:

Unplug the device from the power outlet
Remove the used disc by gently peeling it off the 150 mm plate
Clean the plate if necessary to remove impurities
Install the new disc by aligning its holes with those of the plate
Press lightly on the disc to secure it to the hook-and-loop system (Velcro)

Compatible disc: Use 150 mm diameter hook-and-loop abrasive discs with corresponding holes. These discs are compatible with wood, plastic, paint, and putty.

To order replacement discs and view the complete accessories catalog, visit www.flex-tools.com or contact an authorized Flex distributor.

Question 2

How to connect the cables to the switch of the Flex MXE 1602?

Accepted Answer

The Flex MXE 1602 comes with a 4.0-meter power cable with a ready-to-use plug. You do not need to make any manual cable connections to the switch.

To use the speed selection switch:

The device has a two-speed selector with an anti-engagement mechanism
Press the lock button and turn the selector clockwise to reach the desired speed level
Never change speed while the motor is running
Speed I: high torque mode
Speed II: high speed mode

If you need to connect the device to a fixed workstation or if you encounter a power issue, ensure that the cable is not damaged and that the wall socket provides a nominal 230V (check the device's nameplate).

Question 3

What is the purpose of the speed/operation mode selector dial on the Flex MXE 1602?

Accepted Answer

The Flex MXE 1602 has two selection switches (sometimes referred to as dials):

Operation mode selector (no. 10): Allows you to choose between two operating modes.
Speed selector (no. 11): Allows you to switch between 2 positions: Position I (high torque, for thick materials like mortars or coatings) and Position II (high speed, for low-viscosity liquids like paints and varnishes).

These selectors allow you to adapt the mixer to the type of material being processed. Important: Never change these settings while the mixer is operating - the device must be completely stopped before any adjustments.

Question 4

What type of sanding paper should be used for the Flex GE 6 R-EC sander and what are its dimensions?

Accepted Answer

The Flex GE 6 R-EC sander exclusively uses sanding sheets with a hook-and-loop backing (Velcro system). They must be rated for a minimum speed of 1650 RPM (the maximum speed of the device).

Required specifications:

Sanding sheets compatible with the Velcro hook-and-loop backing
Rated for a minimum of 1650 RPM
Strict prohibition: cutting discs, grinding wheels, flap discs, wire brushes

The PDF of this manual does not specify the exact dimensions of the sheets (available formats and grits). To obtain the precise references for compatible abrasives and their dimensions, please visit www.flex-tools.com or contact an authorized Flex dealer who can recommend the suitable consumables for your type of work.

Question 5

Why does my VC 6 L MC vacuum cleaner blow but not suck?

Accepted Answer

If your VC 6 L MC vacuum cleaner blows normally but does not suck, this usually indicates an air flow problem or a blockage. Here are the checks to perform in order:

1. Check and clean the filter

A dirty filter is the most common cause of low or no suction. The VC 6 L MC has a semi-automatic button cleaning system for regular maintenance:

Turn on the device
Insert the hose into the cleaning opening
Press 3 times on the cleaning button

If this action does not improve suction, proceed with a manual cleaning: rinse the filter (class L) with cold water and let it dry completely before reinstalling.

2. Check the tank and empty if full

A full tank limits or completely stops suction. Empty the dust container (capacity 6 liters) as soon as it is full, especially if you have vacuumed wood shavings or fine dust.

3. Inspect the hose and nozzles

Blockages in the hose or nozzles significantly reduce air flow:

Check that the hose is not bent or crushed
Visually inspect the air passage in the hose
Check the three types of nozzles (flat, brush, fabric) to rule out any blockage
Also adjust the regulation ring on the hose to optimize the flow

4. Check that the blowing mode is disabled

The VC 6 L MC has a separate blowing function. If you accidentally activated the blowing mode and blocked the air return, suction will not work. Check the positioning of the switch and connections.

If after these checks suction does not return, contact Flex support as the motor or priming system may require servicing.

User manual Flex : user manuals and guides in PDF

Models Flex most viewed

Browse manuals Flex by appliance type

Recent questions about devices Flex