PE 150 18-EC C - Polisher Flex - Free user manual and instructions
Find the device manual for free PE 150 18-EC C Flex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless polisher |
| Brand | Flex |
| Model | PE 150 18-EC C |
| Power supply | 18 V lithium-ion battery |
| Motor type | Brushless EC motor (Electronically Commutated) |
| No-load speed | 600 – 2,200 rpm |
| Speed control | Electronic with variable speed |
| Pad diameter | 150 mm |
| Attachment thread | M14 |
| Weight (without battery) | 1.3 kg |
| Dimensions (L x W x H) | 235 x 100 x 130 mm |
| Sound pressure level | 74 dB(A) |
| Sound power level | 85 dB(A) |
| Vibration (main handle) | 2.5 m/s² |
| Protection class | Class III (protection against electric shock by very low voltage) |
| Main functions | Polishing, buffing, fine sanding of painted and varnished surfaces |
| Maintenance and cleaning | Clean the housing with a damp cloth; do not use corrosive products. Regularly check the ventilation slots. |
| Safety | Use safety goggles and a dust mask. Do not work in explosive atmosphere. |
| Spare parts and repairability | Pad, battery, charger, brushes (brushless motor, no brush change). Repair by authorized Flex service. |
| Delivery contents | Polisher, polishing pad, mounting key, instruction manual |
Frequently Asked Questions - PE 150 18-EC C Flex
How do I mount the polishing pad on the Flex PE 150 18-EC C?
Screw the pad clockwise onto the M14 thread. Tighten moderately with a suitable wrench to avoid imbalance.
What type of battery should be used with this polisher?
Only use compatible Flex 18 V Li-Ion batteries. Do not use a battery from another brand.
How do I adjust the speed?
The speed is adjusted via the dial on the housing. Turn it to increase or decrease the speed from 600 to 2,200 rpm.
Can I use this polisher for sanding?
Yes, by replacing the polishing pad with a suitable sanding pad. Use quality abrasives.
How do I clean the polisher after use?
Wipe the housing with a slightly damp cloth. Never immerse the device in water. Check the ventilation slots.
The polisher does not start, what should I do?
Check that the battery is charged and properly engaged. If the problem persists, contact Flex customer service.
Which accessory should be used for buffing a car?
Use a 150 mm diameter foam pad and a suitable buffing foam. Apply the buffing product to the foam, not directly to the car body.
How to store the polisher?
Remove the battery and place the device in a dry, dust-free place. Store accessories in a case.
Is it normal for the motor to heat up during use?
Yes, slight heating is normal. If the device becomes very hot, let it cool down and reduce the workload.
Where can I find the serial number of my polisher?
The serial number is on the nameplate on the housing. Note it for any parts or service requests.
User questions about PE 150 18-EC C Flex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Polisher in PDF format for free! Find your manual PE 150 18-EC C - Flex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PE 150 18-EC C by Flex.
USER MANUAL PE 150 18-EC C Flex
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Flex
Model : PE 150 18-EC C
Category : Polisher