Q: What does it mean when the red LED is flashing?

A flashing red LED on the WAECO CoolFreeze CF 60 indicates that the unit is powered on but not ready to operate . The technical documentation for the CF 60 distinguishes the following power LED states: Solid green: the compressor is running Solid orange: the compressor is stopped Flashing orange: the battery is low (the display has turned off automatically) Flashing red: unit not ready to operate If the unit displays "Err1" or another error code in addition to the red flashing, it indicates an internal malfunction that requires repair by an authorized WAECO service center (repairs cannot be performed independently). Recommended steps: Check that the unit is properly plugged in or connected to the battery Verify that the input voltage is sufficient (12V or 24V DC depending on your model) If the problem persists after 1-2 minutes, contact the authorized service center indicating that the red LED is flashing

Question 1

What does it mean when the red LED is flashing?

Accepted Answer

A flashing red LED on the WAECO CoolFreeze CF 60 indicates that the unit is powered on but not ready to operate.

The technical documentation for the CF 60 distinguishes the following power LED states:

Solid green: the compressor is running
Solid orange: the compressor is stopped
Flashing orange: the battery is low (the display has turned off automatically)
Flashing red: unit not ready to operate

If the unit displays "Err1" or another error code in addition to the red flashing, it indicates an internal malfunction that requires repair by an authorized WAECO service center (repairs cannot be performed independently).

Recommended steps:

Check that the unit is properly plugged in or connected to the battery
Verify that the input voltage is sufficient (12V or 24V DC depending on your model)
If the problem persists after 1-2 minutes, contact the authorized service center indicating that the red LED is flashing

Question 2

Why does the CoolFun MB40 freeze the contents and how to regulate the temperature?

Accepted Answer

The PDF of this manual for the CoolFun MB40 model does not mention programmable temperature control. The CoolFun MB40 is a basic thermoelectric cooler that operates continuously and cools up to 22°C below ambient temperature - without a digital thermostat.

If you observe that the contents are freezing excessively:

Check your environment - The lower the outside temperature, the more the device cools strongly. In a cool environment, cooling can be very intense and freeze food.
Ensure good ventilation - Check that the rear ventilation grilles are not obstructed. Insufficient ventilation can reduce efficiency and cause problems.
Partially insulate the contents - You can place a towel or cardboard between the cold walls and your food to limit direct contact and excessive freezing.
Limit operating times - The MB40 is designed to cool, not to freeze. Do not use the device for extended periods without checking the condition of the contents.

If you have a special version with adjustable thermostat, refer to the dedicated section of your user manual for adjustment instructions.

Question 3

Where is the fuse located on the WAECO TropiCool TCX14 fridge?

Accepted Answer

The fuse of the WAECO TropiCool TCX14 fridge is generally integrated into the power cable or the power connector. Here’s how to locate it:

Checking the power cable: Examine the cable that connects the fridge to the power source. Often, a small plastic box is present along the cable, containing the fuse.
Detachable connector: If your model is equipped with a removable connector between the cable and the fridge, open it to check if the fuse is housed inside.

The fuse serves to protect the appliance against electrical overloads. If you suspect a problem related to the fuse, it is important to check its condition and replace it if necessary with a fuse of the same type and rating.

Question 4

Why doesn't the dashboard of my WAECO TropiCool TCX14 light up while the fan is running but it isn't cooling?

Accepted Answer

If the dashboard (LED display) of your WAECO TropiCool TCX14 does not light up while the external fan is running, it generally indicates that power is reaching the unit but the cooling system is not operational. Several checks are necessary to identify the cause.

Step 1: First, check the power supply and the power button — Ensure that the TCX14 is properly plugged in (12/24V DC socket of the vehicle with the ignition on, or 230V AC socket). Press the "P" button on the control panel to activate the device. If the button is not pressed, no LED display will light up, even if the fan is working. Also, check that you haven't accidentally pressed the button to turn it off.

Step 2: Clean the power connectors — If you are using the vehicle's DC socket, a poor connection may prevent the display from functioning. Disconnect the cable and clean the DC socket with a non-metallic brush and solvent until the center pin is clean. If the pin becomes very hot when plugged in, it is a sign of a poor connection that needs to be fixed. Wait a few minutes, then test the "P" button again.

Step 3: Check the fuses — The TCX14 has a protective fuse in the DC connector (usually 15 A). Disconnect the device and replace this fuse with a new equivalent fuse. Also check the vehicle's fuse at the DC socket. Once replaced, reconnect and wait a few seconds before pressing the "P" button.

Step 4: Completely reset the device — Disconnect the TCX14 for at least 5 minutes to completely reset the electronics, then reconnect it. Press the "P" button again. You should see blue LEDs light up (cooling mode) or red (heating mode), accompanied by the external fan stopping once the temperature is reached.

If the dashboard remains off after these checks — Although the fan is running, this indicates a malfunction of the Peltier element (the thermal core), the internal fan motor, or the built-in power supply. These components can only be repaired by an authorized Waeco service center. Contact them mentioning that the external fan is working but there is no cooling and the control panel is unresponsive.

User manual WAECO Fridge : user manuals and guides in PDF

Models WAECO Fridge most viewed

Other categories WAECO

Recent questions about Fridge WAECO