How to fill the water tank of the BEURER LB 44 humidifier?

Q: How to fill the water tank of the BEURER LB 44 humidifier?

To fill the water tank of your BEURER LB 44 humidifier , start by unplugging the device from the power outlet for your safety. Then lift the water tank by grasping the recessed handle and turn it upside down. A spring flap keeps the tank closed during this handling. Open the screw cap located on the tank by unscrewing it, then pour in the water. The LB 44 tank has a maximum capacity of 2.8 liters , and you can see the water level directly from the outside thanks to the transparent wall of the tank. Important: always fill the tank to the maximum , otherwise physical conditions may cause leaks during operation. Preferably use hot water between 30°C and 45°C to fill the tank. If your tap water is very hard and chalky, you can use demineralized or distilled water. Once filled, securely close the screw cap by tightening it well. Turn the tank upside down by holding it by the recessed handle and place it firmly on the base of the humidifier. Ensure that the tank is properly secured and sitting correctly on the base. You can then plug the device back in and activate the rotary button to start humidification. Maintenance tip: If your water is particularly hard, the manufacturer recommends using an optional anti-scale cartridge to preserve the lifespan of your device. This should be changed regularly depending on usage and the quality of your water.

Question

Accepted Answer

To fill the water tank of your BEURER LB 44 humidifier, start by unplugging the device from the power outlet for your safety. Then lift the water tank by grasping the recessed handle and turn it upside down. A spring flap keeps the tank closed during this handling.

Open the screw cap located on the tank by unscrewing it, then pour in the water. The LB 44 tank has a maximum capacity of 2.8 liters, and you can see the water level directly from the outside thanks to the transparent wall of the tank. Important: always fill the tank to the maximum, otherwise physical conditions may cause leaks during operation.

Preferably use hot water between 30°C and 45°C to fill the tank. If your tap water is very hard and chalky, you can use demineralized or distilled water. Once filled, securely close the screw cap by tightening it well.

Turn the tank upside down by holding it by the recessed handle and place it firmly on the base of the humidifier. Ensure that the tank is properly secured and sitting correctly on the base. You can then plug the device back in and activate the rotary button to start humidification.

Maintenance tip: If your water is particularly hard, the manufacturer recommends using an optional anti-scale cartridge to preserve the lifespan of your device. This should be changed regularly depending on usage and the quality of your water.

User manual BEURER Humidifier : user manuals and guides in PDF

Models BEURER Humidifier most viewed

Other categories BEURER

Recent questions about Humidifier BEURER