What do the exclamation points displayed on the Beurer EM 95 Bluetooth mean?

Question

Accepted Answer

The flashing exclamation points on the screen indicate a loss of contact at one of the electrodes.

According to the Beurer EM 95 manual, when an electrode detaches, the electrical circuit is interrupted and the intensity of the affected channel returns to zero. The device then emits a sound signal and displays a flashing exclamation point on the intensity display of that channel.

Solutions

Check that all adhesive electrodes (45 x 45 mm) are properly attached and adhere well to the skin
Clean the skin before application to ensure better adhesion
If an electrode has come off, reattach it firmly and the display should return to normal
Note that electrodes gradually lose their adhesive capacity over time. The manual recommends replacing them every 20 uses at most
If the electrodes are worn, obtain replacement adhesive electrodes of 45 x 45 mm

The exclamation point will disappear automatically once the electrical contact is restored.

User manual BEURER Massage device : user manuals and guides in PDF

Models BEURER Massage device most viewed

Other categories BEURER

Recent questions about Massage device BEURER