Question 1

How to adjust the height and length of the harness?

Accepted Answer

The BabyGO Tojo car seat features a fully adjustable 5-point harness to accommodate your child's growth. The height adjustment has 3 available positions, while the length adjustment is done by tightening or lengthening the straps.

Adjusting the height of the harness:

To change the height, follow these steps:

Open the harness buckle located on the right side of the seat
Thread the end of the belt through the bottom opening on the side of the seat
Remove the tab from the belt buckle
Pull the end of the belt through the right slider of the straps on the backrest, then thread it into the left slider of the straps
To return to the previous position, repeat these steps in reverse order

For children in group 0+ (0 to 13 kg), use the lowest positions. For children in group 1 (9 to 18 kg), adjust the height so that the child's shoulders are level with the harness on the back.

Adjusting the length of the harness:

After securing your child and closing the buckle, the harness should be snug and flat against their body. To tighten the harness, press the button located between the child's legs, then simultaneously pull on the harness with your other hand. To lengthen the harness, press the same button and pull both straps towards you. Be sure to always pull the harness itself, never its cover.

Adjusting the crotch strap:

The crotch strap has 2 adjustable positions depending on your child's size. Place the seat in the maximum upright position, then pull the cover to access the buckle of the crotch strap. Reposition it to the desired height and close it with the tab.

Question 2

How to wash the reducer of the BabyGO GoSafe car seat?

Accepted Answer

The reducer of the BabyGO GoSafe car seat can be washed by following certain precautions to preserve the quality of the fabric and the safety of the seat:

Tips for washing the reducer:

Check the labels: Before washing, consult the care labels on the reducer for the manufacturer's specific recommendations.
Hand washing recommended: To avoid damaging the materials, prefer hand washing with lukewarm water and mild soap.
Avoid harsh products: Do not use detergents or harsh chemicals that could alter the fabric or the properties of the reducer.
Natural drying: Allow the reducer to air dry, away from direct sunlight, and avoid the dryer to prevent distorting or damaging the fabric.

By following these recommendations, you can effectively maintain the reducer of your BabyGO GoSafe seat while ensuring its durability and your child's safety.

User manual BabyGO Car seat : user manuals and guides in PDF

Models BabyGO Car seat most viewed

Other categories BabyGO

Recent questions about Car seat BabyGO