Safeway - Car seat BabyGO - Free user manual and instructions

Product type	i-Size booster car seat
Brand	BabyGO
Model	Safeway
Category	Child car seat
Compatible child height	100 to 150 cm
Installation orientation	Forward-facing
Restraint system	Vehicle's 3-point seat belt
i-Size compatibility	Approved i-Size positions (consult vehicle manual)
Installation method	Booster seat with belt guides
Adjustable headrest	Yes, height adjustable
Cover material	Machine washable fabric
Cover care	Machine wash in warm water with neutral detergent
Harness and pad care	Hand wash in warm water, do not machine wash
Airbag safety	Never use on a seat with an active frontal airbag
Vehicle position	Rear seat only
Belt restriction	Do not use with a 2-point belt
Replacement after accident	Mandatory, even after a minor impact
Spare parts	Original replacement cover only; harness and pads replaceable by customer service
Warranty	12 months from date of purchase, non-transferable
Use without supervision	Never leave the child unattended in the car

Frequently Asked Questions - Safeway BabyGO

Which child can use the BabyGO Safeway seat?

The seat is suitable for children between 100 and 150 cm. It is a forward-facing i-Size booster seat.

Can I install this seat on the front passenger seat?

No, it is forbidden to install the seat on a front seat equipped with a frontal airbag. Always install the seat on the rear seat.

How to install the seat in the car?

The seat is installed forward-facing using the vehicle's 3-point seat belt. Follow the shoulder and lap belt guides. Consult the vehicle manual to check compatible i-Size positions.

Can I use a 2-point belt to secure the seat?

No, using a 2-point belt is dangerous and may cause serious injury. Use only a 3-point belt approved according to UN/ECE Regulation No. 16.

How to wash the seat cover?

The cover is machine washable in warm water with a neutral detergent. Do not machine wash the harness or shoulder pads; hand wash them with warm water and air dry.

What to do after a road accident?

The seat must be replaced after any accident, even minor, as it may have suffered invisible damage. Do not reuse the seat.

Can I replace the cover with a non-original cover?

No, you must use only original covers provided by the manufacturer. Any other cover may compromise safety.

Is the seat covered by warranty?

Yes, the seat has a 12-month warranty from the date of purchase. It is valid only for the original owner and is not transferable. Keep your proof of purchase.

Can I use the seat if my child is over 135 cm?

The seat is designed for children 100 to 150 cm. Above 135 cm, check compatibility with your vehicle in the car manual. Some vehicles may not be suitable.

How to adjust the headrest?

To adjust the headrest, place it in the highest position to remove the cover, then adjust it to the child's size. Follow the instructions in the manual for correct adjustment.

USER MANUAL Safeway BabyGO

SafeWay - Child seat

INSTRUCTION MANUAL

MANUEL D'INSTRUCTIONS

SafeWay - Kinderzitje

GEBRUIKSAANWIJZING

IMPORTANT : KEEP FOR FUTURE REFERENCE. READ CAREFULLY.

IMPORTANT : À CONSERVER POUR RÉFÉRENCE FUTURE. LIRE ATTENTIVEMENT.

BELANGRIJK: BEWAAR VOOR TOEKOMSTIGE REFERENTIE. LEES AANDACHTIG.

BabyGo Baby Products GmbH

Am Bahndamm 1-3

Line drawing of a car seat assembly (no text or symbols)

SAFEWAY

Seite 04 - 09

DEUTSCH

Page 10 - 19

ENGLISH

Page 20 - 27

FRANCE

Pagina 28 - 35

NEDERLANDS

babyGO

babyGO

Line drawing of a compact car seat with side-mounted seats and seatbelt (no text or symbols)

DE

BEDIENUNGSANLEITUNG

Liebe Eltern:

Line drawing of a chair with curved armrest and red arrow indicating upward motion (no text or symbols)

Line drawing of a car seat assembly (no text or symbols)

Line drawing of a compact car seat with side panels and seatbelt (no text or symbols)

EN INSTRUCTION MANUAL

Dear Parents:

Thank you for purchasing the child seat.

Please read and follow all instructions before using the child seat.

WARNING! Read the Instruction carefully before use and keep them for future reference.

SAFEWAY

WARNING

READ CAREFULLY AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

• Please read this instruction manual carefully.
• The correct installation of the child seat is crucial for your child's safety.
• For future use of the seat, it is important to keep this manual in a safe place.
• Never leave your child unattended in the car.
• Do not use a child safety seat on a vehicle seat that is equipped with a front airbag. This can be dangerous. This does not apply to so-called side airbags.

WARNING

• Suitable for children with a stature height of 100–150 cm.
• Use only in i-Size approved seating positions (see vehicle handbook).
• Rigid and plastic parts must not be trapped.
• Straps must be tight, lap belt low, no twisted straps.
• Never use the seat without its cover.
• Replace the cover only with manufacturer-approved parts.
• Replace the seat after any accident.
• Do not modify or alter the seat.
• Never leave a child unattended in the seat.
• Secure luggage and loose objects.
• Important: Never use on a seat with an active airbag.
  • The seat may not fit in all vehicles above 135 cm child height.

babyGO

CERTIFICATION

Read the car manual first and check whether the car seat is equipped with ISOFIX attachment fixed anchor points, and check the size of recommended ISOFIX attachment constraints on the system if it is matched our ISOFIX attachment size.

WARNING! Only suitable when the approved vehicles are equipped with 3-point safety belts approved according to UN/ECE Regulation No. 16 or other equivalent standards.

DIRECTION GROUP		INSTALLATION METHOD	TYPE
Forward facing 100-150 cm Vehicle belt i-Size booster			seat

SAFEWAY

Here is the positions of installation for your reference

Forward facing
Rear facing
Two points seat belts
√ Three points seats belts
× Front passenger seat
√ The rear vehicle seats

WARNING! If your child is secured in the vehicle seat with only a 2 point belts, he or she could sustain serious injuries possibly resulting in death. Never use in connection with a 2 point belts.

• Do not fasten the child seat on the front passenger seat with validated airbag as it will casue death or serious injury if airbag exploded. Please always secure the child seat on the rear seats.
• Do not fasten the child seat on the rear facing or lateral vehicle seats.
• Please refer to the following graphic when you install your child.

babyGO

MAINTENANCE

WASHING INSTRUCTIONS

The covers are machine washable. Wash the covers with warm water and a neutral detergent.

Note: To ensure safety, do not remove or wash the straps and shoulder pads. If these parts become dirty, clean them by hand with warm water or a neutral detergent and allow them to air dry. Alternatively, have these components replaced by customer service.

WARRANTY

The warranty period starts from the date of purchase and is valid for a period of 12 months. The warranty is only applicable to the original owner and is not transferable. The warranty is only applicable to products that have not been adapted by the user. In the case of any defects, the owner is required to return the product to the retailer. If the retailer can not solve the problem, he must return the product, complete with a clear description of the complaint and a validated purchase receipt to the manufacturer. Exchanger or return can not be demanded. Repairs do not constitute an extension to the warranty term. The manufacturer is not liable for any damages other than those on products supplied.

No warranty is given if:

• The product is not supplied complete with the validated purchase receipt to the manufacturer.
- Defects are caused by misuse or maintenance which differ from that indicated in the instruction manual.
• Repairs are carried out by third parties.
• Defects are caused by neglect.
- Damage or removal of any serial number is found.
- If there is normal wear and tear which may be expected from everyday use. - The stated warranty terms and conditions have not been satisfied.

SAFEWAY

WASHING INSTRUCTIONS

Line drawing of a chair with curved backrest and red arrow indicating upward motion (no text or symbols)

Line drawing of a car seat assembly (no text or symbols)

1. Adjust the headrest to the highest position.
2. Carefully remove the child seat cover of the backrest from the gap between the child seat.
3. Carefully remove the child seat cover of the cushion from the gap between the child seat.
4. Follow the steps above in reverse order to install the child seat cover.

babyGO

SAFEWAY

PARTS OVERVIEW INSTALLATION

A - Headrest
B - Child seat cover
C - Shoulder belt guide
D - Lap belt guides

A - Headrest

B - Child seat cover

C - Shoulder belt guide

D - Lap belt guides

babyGO

Line drawing of a compact car seat with side panels and seatbelt (no text or symbols)

FR MODE D'EMPLOI

Chers parents

Line drawing of a chair with a curved handle and a red arrow indicating upward motion (no text or symbols)

Line drawing of a car comfort seat with seatbelt and seat rack (no text or symbols)

Line drawing of a compact car seat with side panels and seatbelt (no text or symbols)

WASHING INSTRUCTIONS

Line drawing of a chair with curved backrest and red arrow indicating upward motion (no text or symbols)

Line drawing of a car comfort seat with seatbelt and seat rack (no text or symbols)

Abstract logo design with a stylized lowercase 'b' inside a cloud-like frame, featuring a red dot at the center (no text or symbols)

babyGO

BabyGo Baby Products GmbH

Am Bahndamm 1-3